Veer Chandra Singh Garhwali Government Institute Of Medical Science And Research Tender

All Quartz Double Distillation Unit, Demountable Boiler, Panel series, Vertical Model, output capacity 2.5 Lt/hr with Distillation Apparatus Power Supply (DAPS)

Gradient PCR machine for tubes, plates. System should have silver/ Gold plated block to accommodate 96 x 0.1/0.2 mL PCR tubes, 96-well PCR plates (Standard & low profile). Block ramp rate should be 5 Degree C for Heating and 3.5 Degree C for cooling. Gradient PCR, capable of testing 12 different temperatures simultaneously across a gradient range of 1 - 20° C SteadySlope technology for identical ramp rates both during gradient optimization and normal run Triple circuit technology to ensure precise temperature control across the block Flexlid technology with Thermal Sample Protection "Fast, Standard & Safe" temperature control modes Preprogrammed PCR program templates for easy selection Time or Temperature increment/decrement with cycles in PCR program Adjustable ramp rate from 0.1° C to 3.0° C to meet critical amplification conditions Customized programming allows a maximum of 20 steps and 99 cycles Should have possibility to expand with additional block of any one of the following formats, viz., gradient and/or non-gradient universal block, gradient and/or non-gradient fast block, flat block for in-situ PCR. Auto Restart facility with user defined time interval when power fails and resumes Log book function for error messages and new calibration E-mail Notification European CE/ US FDA , ISO certified and RoHS compliance.

Refrigerated Micro Centrifuge for 1.5ml / 2.0ml / 5.0ml tubes. System should have speed range 25000-30,000xg /16000 -18000rpm, with a brushless motor System should have rotor capacity of 48 x 1.5/2mL tubes. Temperature range should be from -10 °C to 40°C, should be able to maintain 4°C at maximum speedInstrument should be supplied with a aerosol tight high speed rotor to accommodate 24 x 1.5ml/2ml tubes, speed of 25000-30000 x g. Instrument should be supplied with a dedicated aerosol tight rotor for 5ml conical tubes, speed at least 20,000 x g. 5ml conical tubes should also be supplied Rotor should be made of aluminum, rotor and rotor lid should be autoclavable at 121°C for 20 mins Aerosol tightness of rotor should be certified by a third party agency Instrument should have an in-built condensate drain to prevent water accumulation It should be possible to perform a fast pre-cooling of the instrument using a dedicated Fast Temp function It should be possible to program fast cooling with preset date and time Speed setting should be possible in both rpm and rcf Should possess a separate short spin key for brief spin It should be possible to program compressor shut off after 8 hrs of non-usage of the centrifuge.Should have the flexibility to accommodate rotors for different formats of tubes starting from 0.2ml PCR tubes and 24-30 place spin column tubes. Instrument should have option to use 1.5/2 ml tubes with a Swing out rotor. Instrument should have automatic rotor recognition facility to automatically recognize and set maximum speeds upon rotor change. Rotor lids should have a QuickLock-system for secure lid closing and opening. It should have 18-20 second or less acceleration and deceleration time. Noise levels should be ˂46 db(A) Instrument should be European CE Certified/ US FDA Approoved and also have a IVD Conformity.