Uttarakhand Disaster Recovery Initiative Tender

labour room table Overall size shall be minimum: 750mm W x 1850mm L x 750mm H, II. Main frame shall be made of mild steel ERW Tube with epoxy powder coating to prevent rust, with adjustable stainless steel bowl aligned with back rest. III. Tubular frames shall be made of 38mm dia with minimum 1.2mm thick, IV. Table Top shall be made in three section in SS with minimum 1 mm thick, V. Head end shall be flexible as it can be raised or lowered down, VI. Middle section shall be a cut out, VII. Leg section shall movable as it can be dragged completely under the main section when not in use, Foot end slide shall be under the table, VIII. I.V. Pole shall be provided with the table made of telescopic saline rod, provided with self locking handgrips, lithotomic crutches detachable type protective railing, IX. Cushioned Mattress shall be 50mm thick upholstered with washable materials, X. The color shall be decided at the time of finalisation of contract and shall be approved by the Employer. The model shall be approved by the employer before procurement.

Foot step Providing and placing two step foot stool - I. Overall size shall be minimum 650mm L x 475mm W x 390mm H II. Stool top shall be made of 1.2mm thick MS sheet for standing purpose, which shall be cladded with minimum 3mm thick natural textured rubber mat for getting a good grip while climbing. III. The understructure shall be made of 1.2mm thick MS frame of minimum 19mm x 19mm square tube. It shall be made using 6 vertical tubes, 3 horizontal tubes at bottom and minimum 10 tubes at top to support the sheet metal top which makes it very strong and rigid. IV. Finish shall be anti-microbial and thermosetting epoxy polyester powder coating in white color to protect from bacteria. V. Each step height shall be in between 180mm-200mm (excluding shoes). VI. It shall have safe working load capacity upto 135kgs. VII. It shall have 10mm high plastic shoes made up of moulded nylon 6 to avoid metal and surface friction. VIII. The color shall be decided at the time of finalisation of contract and shall be approved by the Employer. The model shall be approved by the employer before procurement.

Emergency CRASH CART Providing and placing premium quality Emergency CRASH CART Overall size shall be minimum 900mm L x 500mm W x 1500mm H. 2. The crash cart should be made of 25.4mmx18G Stainless steel tubular frame work. 3. All metal parts shall be SS304 Grade. 4. Should have push handle on one side. 5. Should have S.S. shelves, six colored removable bins & two polystyrene lockable storage units with three drawers each. 6. Facility to carry ECG Monitors, Defibrillators etc on open areas at top centre and bottom shelves. 7. Should have Stainless steel saline rod fixed with. 8. Two accessory mounting brackets to mount accessories anywhere without the need of pre-threaded holes. 9. Crash cart should be mounted on 12.5 cms dia non-rusting swiveling castor wheels. Two having locking arrangement. 10. Oxygen cylinder stand –Stainless steel, on one side.