Uttarakhand Agricultural Produce Marketing Board Tender

Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement - All work up to plinth level :5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stoneaggregate 20 mm nominal size). 5-1-2

Reinforced cement concrete work in walls (any thickness), includingattached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up tofloor five level, excluding cost of centering, shuttering, finishing andreinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). 5.2.2

Reinforced cement concrete work in beams, suspended floors, roofshaving slope up to 15° andings, balconies, shelves, chajjas, lintels,bands, plain window sills, staircases and spiral stair cases above plinthlevel up to floor five level, excluding the cost of centering, shuttering,finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). 5-3

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more 5-22-6

Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as requiredIn gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 10.25.2

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.2-5

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. 2.27

Treatment of soil under existing floors using chemical emulsion@ one litre per hole, 300 mm apart including drilling 12 mmdiameter holes and plugging with cement mortar 1 :2 (1 cement: 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1%concentration 2.35.3.1

Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure above plinth level up to floor V level inall shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)6.4.2

Centering and shuttering including strutting, propping etc. and removalof form for all heights : Foundations, footings, bases of columns, etc. for mass concrete 5.9.1

Centering and shuttering including strutting, propping etc. and removalof form for all heightsLintels, beams, plinth beams, girders, bressumers andcantilevers 5-9-5

Centering and shuttering including strutting, propping etc. and removal of form for all heights Columns, Pillars, Piers, Abutments, Posts and Struts 5-9-6

Centering and shuttering including strutting, propping etc. and removalof form for all heights Suspended floors, roofs, landings, balconies and accessplatform 5-9-3

12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) 13.1.2

15 mm cement plaster on rough side of single or half brick wallof mix:1:4 (1 cement: 4 coarse sand) 13.5.1

Providing and laying Vitrified tiles in different sizes (thickness to bespecified by manufacturer), with water absorption less than 0.08 % andconforming to I.S. 15622, of approved make, in all colours & shade, inskirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @3.3kg/sqmincluding grouting the joint with white cement & matching pigmentsetc. completeSize of Tile 800x800 mm 11-46-3

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1stquality conforming to IS : 15622, of approved make, in all colours, shades,except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick CementMortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cementand matching pigments etc., complete 11-40

Providing and fixing Ist quality ceramic glazed wall tiles conforming toIS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black ofany size as approved by Engineer-in-Charge, in skirting, risers of stepsand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shadecomplete.11-36

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever) conformng to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls andfloors wherever required White Vitreous china Orissa pattern W.C. pan of size580x440 mm with integral type foot rests 17.1.1

Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid, 10 litre low level white vitreouschina flushing cistern & C.P. flush bend with fittings & C.I. brackets,40 mm flush bend, overflow arrangement with specials of standardmake and mosquito proof coupling of approved municipal designcomplete, including painting of fittings and brackets, cutting andmaking good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid 17.3.1

Providing and fixing white vitreous china flat back half stall urinal ofsize 580x380x350 mm with white PVC automatic flushing cistern,with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS :2556, C.I. trap with outlet grating and other couplings in C.P. brass,including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushingcistern 17.5.1

Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction withframe of 1st class hard wood and well matched teak 3 ply veneeringwith vertical grains or cross bands and face veneers on both faces ofshutters. 35 mm thick including ISI marked Stainless Steel butt hingeswith necessary screws 9.20.1

Providing and fixing glazed shutters for doors, windows and clerestorywindows using 4 mm thick float glass panes, including ISI marked M.S.pressed butt hinges bright finished of required size with necessaryscrews. Second class teak wood 35 mm thick 9.9.1.1

Providing and fixing wire gauge shutters using galvanized M.S. wiregauge of average width of aperture 1.4 mm in both directions with wireof dia 0.63 mm, for doors, windows and clerestory windows with hingesand necessary screws :Second class teak wood 9-27-1-1-1

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick 11.6.1

Providing and applying plaster of paris putty of 2 mm thickness overplastered surface to prepare the surface even and smooth complete. 13.26

Distempering with oil bound washable distemper of approved brandand manufacture to give an even shade :13.41.1 New work (two or more coats) over and including waterthinnable priming coat with cement primer 13.41.1

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqmover and including priming coat of exterior primer applied@ 2.20 kg/10 sqm)13.46.1

Painting Steel work with Deluxe Multi Surface Paint togive an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture 13-48-3

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 coarse sand (Zone III) : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:19.30.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarsesand(zone-III) : 4 graded stone aggregate 6mm nominal size), reinforcedwith 1.6 mm dia mild steel wire, including centering and shuttering,roughening cleaning, fixing and finishing with cement mortar 1:3(1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs,sills and soffits. 50 mm thick 5.18.1

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.15 mm dia nominal bore 18-10-1

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.25 mm dia nominal bore 18-10-3

Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes conforming to IS : 13592 Type A, including jointing with sealring conforming to IS : 5382, leaving 10 mm gap for thermal xpansion,(i) Single socketed pipes. 110 mm diameter 12-41-2

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conformingto IS : 13592 Type A, including jointing with seal ring conforming toIS : 5382, leaving 10 mm gap for thermal expansion 110 mm bend 12.42.5.2

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore 18.49.1

Providing and fixing C.P. brass stop cock (concealed) of standarddesign and of approved make conforming to IS:8931. 15 mm nominal bore 18.52.1

Providing and fixing C.P. brass long body bib cock of approvedquality conforming to IS standards and weighing not less than 690gms.15 mm nominal bore18.51.1

Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) : 25 mm nominal bore18.17.1

Providing and fixing PTMT Ball cock of approved quality, colour andmake complete with Epoxy coated aluminium rod with L.P./ H.P.H.D.plastic ball. 15 mm nominal bore, 105 mm long, weighing not less than 138 gms18.62.1

Providing and fixing uplasticised PVC connection pipe with brassunions 45 cm length 15 mm nominal bore 18.21.2.1

Providing and fixing wash basin with C.I. brackets, 15 mm diaCP Brass single hole basin mixer of approved quality andmake, including painting of fittings and brackets, cutting andmaking good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a15 mm CP Brass single hole basin mixer 17-7 A

Providing and fixing square-mouth S.W. gully trap class SP-1complete with C.I. grating brick masonry chamber with water tightC.I. cover with frame of 300 x300 mm size (inside) the weight ofcover to be not less than 4.50 kg and frame to be not less than 2.70kg as per standard design: 100x100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks of class designation 7.519.4.1.1

Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, IS : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular tank18.48A

Providing and fixing in position wall panelling at all heights withintegral densified calcium silicate panels/tiles of size 595 x 595mm,having NRC (Noise Reduction coefficient) of 0.50 (minimum) as perIS 8225:1987, Light reflectance of 85% minimum). Non combustibleas per BS:476 (part-4), fire performance as per BS:476 (part 6 &7),humidity resistance of 100%, thermal conductivity 0.043 W/m Kas per ASTM 518:1991, comprising of a frame made from speciallyfabricated galvanised mild steel sheet 0.50 mm thick pressed section(galvanizing @120 grams per sqm including both sides) i.e.verticalstuds of size 48 x 34 x 36 mm are placed at 600mm center tocenter in a floor and ceiling channel section of size 50 x 32m fixedto the floor and soffit at 600mm centers using 12mm dia,50mm longwedge type expanded zinc alloy dash fastner with 10mm bolt. Thissame channel is then to be fixed in horiziontal direction at 600mmcenter to center so as to form a grid of 600mm x 600mm. Glasswoolof 50mm thickness is then to be inserted in the slots and finallycalcium silicate non combustible panels/tiles are to be screw fixedwith self tapping pan head nickel coated mild steel screws of size13 x 3.2mm on to this grid leaving an even groove of 1 mm betweenthe panels. The joints between the panels are to be duly jointed andfinished using recommended jointing calcium silicate basedcompound and fiber joint tape roll 50mm wide (90 metre )roll andtwo coats of primer suitable for panelling as per manufacturer'sspecification as per direction of Engineer-in-Charge all complete. With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles 26.24.1

Providing & fixing false ceiling at all heights with GRG (Glass FibreReinforced Gypsum) false ceiling tiles of Size 595x595 mm ofapproved texture, design and patterns having moisture content lessthan 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS8225:1987, Non combustible as per BS 476 (part-4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal levelsuspended on inter-locking metal T-Grid of hot dipped galvanisediron section of 0.33mm thick (galvanized @ 120 grams per sqmincluding both sides) comprising of main-T runners of size 15x32mm of length 3000 mm, cross - T of size 15x32 mm of length 1200mm and secondary intermediate cross-T of size 15x32 mm oflength 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dashfasteners, 6 mm dia fully threaded hanger rod upto 1000 mm lengthand L-shape level adjuster of size 85x25x2 mm. Galvanised ironperimeter wall angle of size 24x24x0.40 mm of length 3000 mm tobe fixed on periphery wall / partition with the help of plastic rawlplugs at 450 mm center to center and 40 mm long dry wall SSscrews. The work shall be carried out as per specifications, drawing and as per directions of Engineer-in-Charge.With fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG false ceiling tiles 26.26.2

providing and fixing plain bend of required degree 100 mm dia sand cast iron S&S as per IS 172917-39-1-1

17.35.2 75 mm diameter : 17.35.2.1 Sand cast iron S&S pipe as per IS: 1729

Excavation in soil in Hilly Area by mechanical means Withoutuseinng Dozer including cutting and trimming of side slopes anddisposing of excavated earth with a lift upto 1.5 m and a lead upto20 m as per Technical Specification Clause 1603.1 1-1-1 A

*Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specifiction. misc 1-4