Military Engineer Services Tender

M&L PCC 1:3:6 type C2 using 40 cmm graded stone aggregate as in foundation filling concrete of fencing post complete all as specified.

S&Fsteelworkinstruts,polesandsimilarworkincludingspecialshapedwasheretccompleteusingERWorinduction butt welded tubes conforming to IS 1161-1998 grade St-240 quality-A all as specified and directed

S&FRooftrusses(framed),trussed,purlins,cranegantries,railsandfasteningsandheavybracketframing(Beam,tee,angle,channelorflatsections)includingdistancepieces,cleats,stagingforwatertanks,gussetplates etc. conforming Fe-290 (Gde E-165) complete all as specified and as directed.

S&Fmildsteelworkasinmainandcrossbeam,hipandjackrafters,purlinsetc.fixedwithanglecleatorotherconnectingplatecompleteconfirmingtoFe–410-OorFe–310-Olongcompleteallasspecifiedandasdirected.

S&Fmildsteelscrewbolts(machinemade)withhexagonalorsquareheadsatoneendandscrewedtheother,orscrewedbothendseachscrewedendtobefittedwithwasherandonehexagonalorsquarenutnexc5cmlong(05 to 10 mm dia of neck) complete all as specified and directed

M&L for two coats of synthetic enamel paint on new steel surfaces over a coat of red oxide primer of any description including preparation of new surfaces exc.10 cms in width or girth complete all as specified.

Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

Supply and fix pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

M&L PCC 1:4:8 type D-2 using 40 mm graded stone agg as in sub base, foundation filling, mass concrete, etc complete all as specified and as directed.

M&L brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including all quoins, arches, pillars etc complete all as specified.

M & L rendering 15mm thick on cement mortar 1:4 on fair/ unfair faces of brick/ concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L Hardcore of broken bricks or boulder gauge exc 63mm but n. exc 100mm, deposited , spread and levelled in layers n.exec 15 cm thick, watered and rolled/rammed to a tue surface complete all as specified.

M&L for 75 mm thick cement concrete type D2 1:4:8 (40 mm graded stone aggregate) as in sub base of floor for lay floor finish complete all as specified and as directed.

M&L for 25 mm thick cement concrete in 1:2:4 type B-1 ( 20 mm graded aggregate complete all as specified and directed

M&L for 100 mm thick cement concrete type D2 1:2:4 (40 mm graded stone aggregate) as in floor for lay floor finish complete all as specified and as directed.

Returning,fillinginincludingspreading,levelling,wateringandwellramminginlayersnotexc25cmthickcomplete all as specified and directed

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point and complete all as directed.

Sand filling under floors or in foundations including watering and consolidation all as specified and directed

M&L for point wiring with 1.5 Sqmm. (nominal area) FRLS, single core PVC insulated 1100 Volts, grade multistranded copper conductor unsheathed in and including concealed PVC conduit medium duty 20 mm dia or higher and heavy grade conduit fittings and heavy duty accessories with suitable size of sunk type cast iron or pressed steel terminal box 1.6mm thick for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, one green colour FRLS cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge of following. Make of PVC Wire: Havells/KEI/Finolex/L&T. Note: The wiring to be done as per IE rule and maintain colour code accordingly.

(a) One light point point /bell buzzer/fan point controlled by one-one way switch.

(b) One three pin 5 Amp socket on same board with other switches.

(c) One three pin 5 Amp socket on independent board

All as per item No 22 above but one 3 pin socket outlet 15 Amp independent, with cable 2.5 Sq mm size, with earth continuity coductor of size 1.5 Sq mm.

S&F switch piano flush button type 15 Amps SP 250 V AC complete all as specified & directed.

S&F socket outlet multipurpose 3 Pin 5 Amp and 2 Pin 5 Amps 250 V AC complete all as specified & directed.

S&F socket outlet two in one three pin 5 Amp and 15 Amp 2 module 120 W flush type complete al as specified.

S&F ceiling rose, 3 terminal/PVC/polycarbonate, isolated body 250 V AC.

S&F lamp holder,pvc/polycarbonate type with back platesuitable for batten fittings including 9w LED bulb complete all as specified & directed.

S&F sheet metal enclosure 4 way DBs IP-43 suitable for 200 Ams rated bus bar complete all as specified and directed Make Legrand/Schneider/ABB.

S&F MCB double pole 240 Volt 10 KA 40 Amp 'B' series conforming to ISI marked complete all as specified & directed Make Legrand/Schneider/ABB...

S&F MCB single pole and 240 volt 10 KA 5-32 Amp 'B' series conforming to ISI marked all as specified and directed Make Legrand/Schneider/ABB...

S&F wall mounted LED tube light fitting 1x20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed.

S & F high efficiency LED bulbs 1 X 12 watt that can be used as a ready replacement for existing GLS ad CFL direct fit in holder complete all as specified and directed.

Supply and Fixing Integral LED Bldg security Light Luminaire comprising of pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 45 watt with efficiency 100 lumen/watt at system level, CCT5700K, with average life class 50,000 burning hours, complete all as specified and directed.

S&F ceiling fan 1200 mm sweep single phase 230 volts double ball bearing with down rod , canopy, blades etc BEE 5 star rated including connecting with twisted three cord flaxible copper conductor cable (23/.0076 ) from ceiling rose to connector of fan comlete all as specified and directed Make Havells/ Crompton/ Orient/ GEC.( Note: Old unserviceable ceiling fan will be deposited in E/M store yard. )

Materials and Labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground end vertically to a depth not less than 2.25 meter deep below ground level with top edge of the earth plate at a depth not less than 1.5 M below normal ground level connected to galvanized steel earth wire 4 mm dia by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1, cover slab 54 cm x 54 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm c/c both ways, and with one handle for lifting made out of 10 mm dia MS round bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing (light grade) for protection of earth lead connection, including necessary excavation and earth work in any type of soil and necessary testing complete all as shown on electrical plate No 3 of SSR Part –I (2009) and as directed.

All as per Item No 39 but in GI wire 4.0 Sqmm

M&L for excavation in trenches n. exc. 1.5 mtr wide and n. exc. 1.5 mtr in depth for laying of underground cable, foundation of pole and getting out in soft/loose soil complete all as specified and directed.

M&L for returning, filling in excavated soil in trenches including spreading, levelling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed.

M&L for Removing of excavated soil to a distance n. exc. 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M&L for laying local dry clean sand filling for cushioning in trenches around under ground cable complete all as specified and directed.

M&L for laying well burnt brick, old size in trenches, as protection of under ground cable complete all as specified and directed.

Supply, laying, jointing and testing of underground XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 4 Core laid in trenches/ducts/along poles/through pipe under road etc with new aluminium lugs of cable size all as specified and directed. Make -Havells/ICL/Gloster/Plaza/KALINGA/Finolex/Polycab

All as per Item No 46 but 16 Sq mm, 2 core

Supply and lay in trenches fixed to poles wall laid in floor GI steel tubing medium grade 50 mm bore with fitting GI clamps made out of 50 x6mm flat iron 02 Nos, bolt, nut & washers etc or wooden rubber bushing at the ends of complete all as specified and directed.

M & L and installation, factory fabricated bus bar chamber out door pedestal type made out of 2.0 mm thick CRCA sheet of size 750x500x400 mm duly painted with powder coating, simens grey/RAL fitted with four Nos aluminium bus bar of capacity 400 Amps duly mounted epoxy insulator , Cable connections of incoming and outgoing cables duly insulated PVC heat shrinkable sleeve 1.1 KV grade including one No MCCB, 200 Amps, 4 pole, 16 KA, with adjustable thermal setting Ics=100% Icu, including glands c/p lugs etc including 50x50x6mm angle iron frame 450mm height above ground level and 450mm below ground level, angle iron frame shall be embeded in PCC (1:2:4) type B 1 block of size 200x200x200mm complete all as specified and directed.

M&L of GI bracket made out of 40 mm GI pipe medium grade bend for fabrication to shape as required length of pipe 1.2 mtr with necessary fixing arrangement by means of MS clamps 02 Nos not less than 50x6 mm MS flat duly painted, nuts, bolts and washer complete all as directed