Military Engineer Services Tender

Dismantling and taking down old U/S TPN DB/SPN DB any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified

Material & Labour for Point Wiring for one light Point/one fan point/ one call bell point, controlled by one switch with 1100 volts grade single core conforming to (IS:694 /1990) PVC insulated unsheathed 1.5 sqmm multi stranded copper conductor cable (FRLSH) with contineous earth wire of 1.5 Sqmm stranded copper conductor cable (FRLSH) PVC insulated unsheathed , drawn in and including concealed PVC conduit,medium grade(ISImarked) ,duly concealed on wall/ceiling or above false ceiling with fittings not less than 20 mm dia medium grade (Color coding of wires shall be Phase, neutral and earth wire all as specified ) sunk Metal flush box with and incl decorative polycarbonate frame for housing Modular Switches, sockets , fan regulators etc including white cover plate complete all as specified and directed. Note:- i) Cost of cutting chases of suitable girth where required on brick /concrete surface and making good disturbed surface shall be deemed to be included in quoted rates ii) If the contractor fail to make good the disturbed surface of wall/floor etc and do not match with the existing surface of wall/floor to the entire satisfaction of Engr-in-Charge a recovery @ of Rs. 50/- per RM will be made from payment due to the Contractor. In case of any dispute the decision of accepting officer will be final and binding.

One 3 pin/5 pin 5/6 Amps socket outlet on same board with other switches, with cables 1.5 Sqmm size, complete all as specified and directed.

All as per item no 5.01 here-in-above but for One 3pin/5pin 5/6 Amps socket out let on independent board with other switches, with cables 1.5 sq mm size, complete all as specified and directed.

All as per item no-5.01 here-in-above but controlled by two, two way switch 5/6 Amps. With cables 1.5 sq mm size complete all as specified & directed.

All as per item No 5.01 here-in-above but with 2.5 Sqmm PVC insulated FRLSH cable for 15 Amps power point complete all as specified & directed.

All as per item No-05 here-in-above but in existing concealed conduit inside wall, ceiling etc (light, fan, call bell) complete all as specified and directed.

All as per Item No 5.01 above but in existing concealed conduit inside wall, ceiling etc (5 amps socket on same board) complete all as specified and directed.

All as per Item No 5.02 above but in existing concealed conduit inside wall, ceiling etc (5 Amps socket on Independent board) complete all as specified and directed.

All as per Item No 5.04 above but in existing concealed conduit inside wall, ceiling etc (15 Amps socket on Independent board) complete all as specified and directed.

Material & Labour for Point Wiring for one light Point/one fan point/ one call bell point, controlled by one switch with 1100 volts grade single core conforming to (IS:694 /1990) PVC insulated unsheathed 1.5 sqmm multi stranded copper conductor cable (FRLSH) with continious earth wire of 1.5 Sqmm stranded copper conductor cable (FRLSH) PVC insulated unsheathed , drawn in and including, PVC Casing Caping "medium grade" (ISI marked) , of 20 mm size fixed on wall/ceiling or above false ceiling with fittings medium grade (Color coding of wires shall be Phase, neutral and earth wire all as specified ) sunk Metal flush box with and incl decorative polycarbonate frame for housing Modular Switches, sockets , fan regulators etc including white cover plate complete all as specified and directed.

All as per Item No7 above but for (5 amps socket on same board) complete all as specified and directed.

All as per Item No 7 above but for (5 amps socket on Independent board) complete all as specified and directed.

All as per Item No 7 above but with 2.5 Sqmm PVC insulated FRLSH cable for 15 Amps power point complete all as specified and directed.

S & F switch Modular single pole, one way 6 Amps , 1 module,ISI Marked 230 volts, 50 hz complete all as specified and directed.Make: Legrand cat No: 6734 01/ Indoasian Cat No: 800000 or Cona Cat Part No: 9251

S & F fixing switch modular , one-way 16Amps, 1 module ISI marked 240 Volts AC complete all as specified and directed. Make: Legrand cat No: 673411/ Indoasian Cat No: 800002 or Cona Cat Part No: 9386

S & F Modular Socket outlet, 6A - 2/3 pin combined, 2 module ISI marked, 230 volts, 50 hz complete all as specified and directed.Make: Legrand cat No: 6734 52 / Indoasian cat no: 800020 or Cona Cat Part No: 9301

S & F modular socket, 6A/16A -2/3 pin combined 2 module ISI Marked 230 volts, 50 hz complete all as specified and directed. Make:- Legrand cat No: 6734 55 / Indoasian cat no: 800022 or Cona Cat Part No: 9311

S & F switch modular single pole, two way 6 Amp, 1 module ISI marked, 230 volts, 50 hz all complete all as specified and directed. Make:- Legrand cat No: 6734 02 / Indoasian cat no: 800001 or Cona Cat Part No: 9256

S & F bell push modular single pole one way 6 Amps, 1 module , ISI marked complete all as specified & directed. Make:- Legrand cat No: 673022 / Indoasian cat no: 800007 or Cona cat part No-14011.

S & F bell ding dong AC 230/240 volts single pole, complete all as specified & directed.

S & F ceiling rose surface bakelite 65 mm dia having three terminals complete all as specified & directed.

S & F Fancy angle holder Metal ring insulated body with back plate, suitable for batten fittings complete all as specified & directed.

S&F in repairs switch piano 230 volts, AC, flush type single pole, one way 5/6 Amps ISI marked complete all as specified and directed. Make:- Anchor/ Cona/Havells

S&F in repair switch piano 230 volts,AC, flush type white /ivory finish 15/16 Amps ISI markd single pole one way complete all as specified and directed.Make:- Anchor/ Cona/Havells

S&F in repairs, socket out let 3/5 pin 5/6 Amps flush type complete all as specified and directed. Make:- Anchor/ Cona/Havells

S&F in repair socket outlet 5/6 pin 5/15 ampISI Markd flush type multi suitable for 240 volts AC ISI marked complete all as specified and directed. Make:- Anchor/ Cona/Havells

S&F in repair batton/angle holder insulated body with back plate, suitable for batten fittings complete all as specified & directed.Make:- Anchor/ Cona/Havells

S& F surface mounted LED luminiare, 20 watt with all accessories having aluminum extruded channel with diffuser for glare free light, high lumen output, driver PF 0.98 having over voltage protection upto 400 volts surge protection, level 7-10 KV thermal short circuit protection THD10%, made up of long life LED chips (SMD) in modular with Ra70 and lumen efficiency 120 lumen per watt, internally pre-wired through flexible wire connecting with ceiling rose all as directed. Make: Shakti/ C&S/Havells.

S&F Straight Linear 10Watt, LED Tube light fittingaluminum extruded body for mirror light, 2ft long with LED light source with uniform light output, , Surge protection range-2KV , Voltage- 120- 280 V AC, System efficacy not less than 110 lumen /watt, power factor 0.98, THD 20%, CRI 80, CCT 6500K, fixed on site with all accessories all as specified directed, Make: shakti/C&S/Havells

S&F Decorative gate light made up of high grade unbreakable polycarbonate material complete with 18 Watt LED type including connecting up with twine core twisted flexible copper conductor cable with suitable size of 230v, 50HZ all as specified & directed , Makes : Shakti/ Havells /Bajaji.

S&F 36 Watt, LED Panel 2X2 Feet environmental friendly, fully diffused, using engineering grade aluminum diffuser, new generation, aesthetically designed, CRCA housing, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/ Grid Ceiling, Voltage range – 120v- 280V AC, System efficacy – 110 Lumen / Watt, power factor 0.98, thd15%, CCT 6500K, with separate electronic driver ceiling light 36W including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50HZ all as specified & directed, Make: C&S/ Shakti/ Havells/ Wipro.

S&F 36 Watt, LED Panel 2X2 Feet environmental friendly, fully diffused, using engineering grade polycarbonate diffuser, new generation, aesthetically designed, CRCA housing, ultra modern Surface mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/ Grid Ceiling, Voltage range – 120v- 280V AC, System efficacy – 110 Lumen / Watt, power factor 0.98, thd15%, CCT 6500K, with separate electronic driver ceiling light 36W including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50HZ all as specified & directed, Make C&S/ Shakti/ Havells/ Wipro.

S&F 18 Watt LED Panel 1X1 feet environmental friendly, new generation, aesthetically designed, flat panel for recess mounting which provides soft-light and glare free symmetrical illumination, Voltage range-120V-280V AC, system efficacy -110 Lumen/Watt, power factor 0.98, thd15%, CCT 6500K,with separate electronic driver ceiling light 18W including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50HZ all as specifified & directed,Make: C&S/ Shakti/ Havells/ Wipro.

S&F 18 Watt LED panel 1x1 feet environmental friendly, new generation aesthetically designed flat panel for surface mounting which provides soft-light and glare free symmetrical illumination, Voltage range-120V-280V AC, system efficacy -110 Lumen/Watt, power factor 0.98, thd15%, CCT 6500K, with separate electronic driver ceiling light 18W including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50HZ all as specifified & directed, Make: Shakti/ Havells/ Wipro.

S&F 10 Watt LED aluminum Bulkhead surface mounted with opaque aluminum diffuser for optimum light output IP65 environmental friendly, Voltage range-120V-280V AC,power factor0.98 system complete including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50HZ all as specifified & directed,Make Shakti/ Havells/ Wipro.

S & F sheet metal enclsoure double door type for MCCB DB TPN 4 way Vertical including MCCB 4 pole, adjustable thermal & fixed magnetic type 63 Amp, 26 KA, 4 pole MCCB of Make Legrand, ABB, Schnedier all as specifie and directed.Make:Legrand/ABB/Schnider

S & F sheet metal enclosure double door type for MCBs DB TPN 415V AC 4 way with 200 Amps rated bus bar complete all as specified and directed.Make : Legrand/ABB/Schnider

S & F sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 12 way with 200 Amps rated bus bar complete all as specified and directed .Make:Legrand/ABB/Schnider

S & F sheet metal enclosure double door type for MCBs DB SPN (Single pole and neutral) 240V AC 8 way with 200 Amps rated bus bar complete all as specified and directed . Make : Legrand/ABB/Schnider

S & F sheet metal enclosure double door type for MCBs DB SPN (Single pole and neutral) 240V AC 4 way with 200 Amps rated bus bar complete all as specified and directed .Make : Legrand/ABB/Schnider

S & F MCB, TPN, AC, 415 volts of 40-63Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed. Make:Legrand/ABB/Schnider

S & F MCB SPN 10- 32 Amp 240 V AC 10 KA B curve repturing capacity complete all as specified& directed Make:Legrand/ABB/Schnider

S&F MCB SP 6 to 32 Amp 'B' series 10 KA 240 V AC 50 Hz repturing capacity complete all as specified & directed. Make:Legrand/ABB/Schnider

S&F sub main wiring two single core 6 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLSH ) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade surface/concealed in wall along with 6.00 Sq mm PVC insulated unsheathed copper conductor cable (FR LSH) as earth wire and wire connected with main earth dolly including cutting chases and making good disturbed portion complete all as specified and directed . Note: Two runs of phase, netural wire and one run of earth wire and PVC conduit will be measured as one RM or one length.

S&F sub main wiring two single core 6 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLSH ) 1100Volts grade drawn in existing conduit surface/ concealed in wall along with 6.00 Sq mm PVC insulated unsheathed copper conductor cable (FRLSH ) as earth wire and wire connected with main earth dolly complete all as specified and as directed. Note: Two runs of phase, netural wire and one run of earth wire will be measured as one RM or one length.

S&F service cable 1100 Volts grade heavy duty cable PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended with insulating hanger not more than 1 mtr apart including 4 mm dia suspension wire alongwith 10 Sqmm twin core flat cable all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. ( earth pit not less than 2.25 mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all around the plate. connected by 4 mm GI wire as earth lead by means of brass nuts and bolt, thimbles check nuts, washers including concrete chamber of PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320x320x80mm size PCC 1:2:4 Type B1 using 20mm graded stone aggregate rainforced with XPM all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI wire upto 7.5 mtrs long with 15 mm dia medium grade GI pipe protection and watering pipe of GI 20 mm bore, medium grade, including all exavation and earth work and connecting the earthing wire to DB, including testing on completion complete all as specified and directed. Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick reinforced with XPM weighing not less than 4kg/sqm in lieu of CI cover. (ii) Cost of additional GI wire more than 7.5 mtrs will be measured and paid seperately under relevant items.

Fixing only serviceble light fitting retrived from Item No-02 here-in above all as specified and directed.

Fixing only serviceable switches retrived from Item No-02 here-in above all as specified and directed.

Fixing only serviceable sockets retrived from Item No-02 here-in above all as specified and directed.