Military Engineer Services Tender

Disconnecting and removing the water and electric connections carefully & Dismantling and taking out the existing electric driven Multistage Spilt casing type pump set with 75kw/105HP, at 1500 rpm Diesel Engine (kilrloskar make) coupled with Pump having discharge at 88 mtr head model; HB60-20 from suction and delivery pipe lines transporting the pumpset to a Authoried Workshop for reconditioning of motor,Pump and change of parts in water pump Set including fitting of mechanical seal, Replacement of flexible coupling parts and alignment of pump and motor and thorugh servicing, greasing and oiling to the pump and motor, varnishing to the motor winding including other minor work required, re-assembling the pump and Engine, transportiang the same to its orginal location, fixing in position, connecting up electrical and pipe line connection, testing and commisssionig Commissioning of pump set for satisfactory operation on its full load complete all as specified and directed.

Disconnecting and removing the water and electric connections carefully & dismantling and taking out the Existing Multistage pump Spil casting set of capacity 55kw/ 75 HP, Head-88 mtr, 1500rpm from base frame including disconnection suction and delivery pipes and shifting to workshop for repair. Dismentling of pump and motor.Varnishing to the motor winding,overhaluing complete after through cleaning all parts of motor by kerocene oil including material and labour of replacement worn out parts it required i.e. CI implellers, CI sleeves, CI bush/bearing, MS coupling with rubber tyre/ star type CI neck ring CI center stage ring, Ball bearing DE & NDE, stud nut, bolt, washer& body packing gasket of pump with necessary welding machine/ grinding work if required for repair of shaft/ pump body & .re-assembling pump on base frame with proper alignment with motor including re-shifting to the same to its orginal location, fixing in position, connecting up electrical and pipe line connection, testing and commisssionig of pump set for satisfactory operation on its full load complete all as specified and directed.

Disconnecting and removing the water and electric connections carefully & dismantling and taking out the Existing Multistage pump Spil casting set of capacity 11kw/ 15 HP from base frame including disconnection suction and delivery pipes and shifting to workshop for repair. Dismentling of pump and motor.Varnishing to the motor winding,overhaluing complete after through cleaning all parts of motor by kerocene oil including material and labour of replacement worn out parts it required i.e. CI implellers, CI sleeves, CI bush/bearing, MS coupling with rubber tyre/ star type CI neck ring CI center stage ring, Ball bearing DE & NDE, stud nut, bolt, washer& body packing gasket of pump with necessary welding machine/ grinding work if required for repair of shaft/ pump body & .re-assembling pump on base frame with proper alignment with motor including re-shifting to the same to its orginal location, fixing in position, connecting up electrical and pipe line connection, testing and commisssionig of pump set for satisfactory operation on its full load complete all as specified and directed. Note: - FOR ITEM No. 1, 2 & 3 :- (i) Contractor shall take proper precautions while lifting out and removing Diesel Engine along with water pump set and acecssories from existing location well so as to avoid any damage . All necessary T&P and equipments required for dismental of the same arranged by the contractor at his own cost. (ii) Expendable stores like cotton waste/cleaning materials lubricants , gland packing metal filling, machinaing and transportation to and fro from site to work shop are deemed to be included in rate quoted. (iii) Minor spares Part required for repair the pump sets,motor,MS pipe,MS Nut, botls, washers ,rubber gasket joints etc and are deemed to be included in rate quoted. (vi) The rates for above items are deemed to include transportation to & fro of pumps/ motors to workshop as approved by Engineer-in-charge for necessary repairs, alignment and testing of pump and motors at workshop. (v) The rate quoted for the item shall include re-metaling of Pump shaft, polishing and grinding and making standard size to match with Gun Metal Bush/Neck-ring. (vi) The quoted rate shall be deemed to include replacement of small/ minor parts i.e. washers, keys for coupling, cable packing ring etc. (vii)Labour elemetns is included in unit rates.