Military Engineer Services Tender
View complete overview of Uttarakhand MES Tender
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date19 Sep 2024
Closing Soon27 Nov 2024
Tender Amount₹ 2,68,00,000
Costs
EMD
₹ 3,43,000Document Cost
₹ 2,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_675328_1Tender No
CEBZ/PGH/T-19 of 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Demolition of brick work built in cement mortar complete all as specified and directed.
24.45
-
-
M&L for brick work with sub class `B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
21
-
-
M&L for brick work with sub class `B’ bricks, straight or curved on plan to any radius as in half brick thick walls, built in CM 1:4 complete all as specified and directed.
30
-
-
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.
9.1
-
-
M&L for Nominal mix RCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in Slab supported on walls,beams and columns in floors,roof, landing, balconies complete all as specified and directed.
4
-
-
M&L for Formwork to soffits of suspended slabs such as roof slab, floor slabs landings and sgh finished surfaces of concrete flat complete all as specified and directed.
35
-
-
M&L precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 including necessary form work complete all as specified and directed. (reinforcement to be measured separately)
2.5
-
-
M & L for mild steel TMT bars ,10mm dia and over , cut to length , bent to shspe required incl cranking , bending spirally for hooping for coloumns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia all a specified and directed
639
-
-
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed of 15 mm thick in CM 1:6 complete all as specified and directed by Engineer in charge.
20
-
-
M&L for Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade incl rounding off edges and bull noosing of all external edges over screed bed of 15 mm thick in CM 1:6 and pointed in white or coloured cement to match complete all as specified.
40
-
-
M&L for Mirror polished Kota Stone slab flooring 20-25 mm thick over cement screed bed 15mm thickin CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.
79.1
-
-
M&L for mirror polished Kota Stone slab 20-25 mm thick in riser of steps, skirting, dado and, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over screed bed of 15 mm thick in CM 1:6 and pointed in white or coloured cement to match complete all as specified and directed.
40.35
-
-
Dismantling floor, hearth, wall tiling including taking down plastering in cement mortor removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
1746.6
-
-
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and as directed.
1066.62
-
-
M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate) as in level course with finshining in cement concrete surface even and rough to receive screed bedcomplete all as specified and directed.
500
-
-
M&L Joint free Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick in CM 1:6 and pointed in white or coloured cement to match complete all as specified and directed.
121.28
-
-
M&L Joint free Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick in 1:6 and pointed in white or coloured cement to match complete all as specified and directed.
876.23
-
-
M&L Joint free Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in skirting/dado or verticle surfaces with back coat of screed bed or bedding layer of 10 mm thick in CM 1:4 and pointed in white or coloured cement to match complete all as specified and directed.
70.94
-
-
M&L Glazed coloured ceramic tiles in verticle surfaces 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match with back coat of screed bed or bedding layer 10mm thick in CM 1:4 and pointed in white or coloured cement to match complete all as specified and directed.
1350.4
-
-
M&L Virified tiles 8 to 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and painted in white or coloured cement to match the shade over screed bed of 15 mm thick in CM 1:6 and pointed in white or coloured cement to match as in floor etc , all as specified.
250.86
-
-
M&L Virified tiles 8 to 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado, vertical etc. set and jointed in neat cement slurry and painted in white or coloured cement to match over screed bed or bedding layer 10mm thick in cm 1:4 on vertical complete all as specified and as directed
24.06
-
-
S& F in repair 600x 450mm bevelled edge mirror or selected quality glass mounted on 6mm thick AC bldg board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers complete all as specified and directed.
30
-
-
M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and directed.
300
-
-
Taking up or down GI Water Tubing 15mm dia (bore) including Connections and Fittings, segregating serviceable Pipes & Fittings and Stacking properly at Site(s) for re-use, complete all as specified and as directed.
355
-
-
-ditto- all as per Item No. 27 here–in–before, but for 20mm dia (Bore).
482
-
-
-ditto- all as per Item No. 27 here–in–before, but for 25mm dia (Bore).
245
-
-
Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.
355
-
-
-ditto- all as per Item No. 30 here–in–before, but for 20mm dia (Bore).
482
-
-
-ditto- all as per Item No. 30 here–in–before, but for 25mm dia (Bore).
245
-
-
S&F in repair 15mm dia bib taps CP Brass with Capstanhead, screwed down, screwed for iron pipe or for brass ferrule of bore 15mm complete all as specified and directed.
52
-
-
S&F brass 15mm Chromium plated Basin Mixer valve hot and cold screwed down for iron pipe and fixed complete all as specified and directed.
28
-
-
S&F in repair Angle Cock,15mm fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
160
-
-
S&F in repair Brass chromium plated shower rose 125mm size with 225 mm Flange, swivel joints, including fixing to steel pipe or union complete all as specified and directed.
28
-
-
S&F in repair Tubular towel Rail CP Brass, chromium plated D type with CP Brackets, 600 mm long between flanges complete all as specified and directed.
28
-
-
S&F Glass shelf 450 x 125 x 6MM (with ABS Bracket chromium plated bracket guard and SS railing complete all as specified and as directed
28
-
-
S&F Toilet cabinet Mirror of size 400 x 500 made out of 2mm thick acrylic sheet with internal shelves and openable shutters incl 10mm dia aluminium /brass CP rod make as approved by GE complete all as specified and directed.
6
-
-
S&F in repair Soap Dish Stainless Steel complete all as specified & directed.
30
-
-
S&F in repair Peg Set of 6 Stainless Steel as approved by Engr-in-Charge
52
-
-
S&F Corner Glass Shelf 300mm (with ABS Brackets) 300 x 600mm as approved by Engr-in-Charge
28
-
-
S&F Brass CP Wall mixer for mixing hot & cold water (3 in 1) screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified and directed.
28
-
-
S&F in repair Hand Shower (health faucet) CP Brass 15 mm bore with 1 meter long easy flex tube in chrome finish and wall hook with NRV (Back Flow Preventer) as approved by the GE complete all as specified and directed.
6
-
-
S&F in repair Towel Ring including necessary stain less steel screws, rawl plugs and washers complete all as specified and directed.
28
-
-
S&F in repair 15mm dia bib taps Sink Cock swinging spout with flange chromium plated cast copper alloy with crutch or butterfly handle complete all as specified and directed.
24
-
-
S&F in repair Brass CP Sink Mixer with regular spout for mixing hot & cold water screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified and directed.
2
-
-
S&F in repair stainless steel plate rack of 1.00 mm thick of size size 24 x 30 x 10 inch of best quality including necessary stain less steel screws, rawl plugs and washers complete all as specified and directed.
26
-
-
Demolition and taking out cement mortar or lime concrete, brick bats from sunken floor portion complete all as specified and as directed.
18.22
-
-
M&L for 15mm thick cement plaster as in sunken portion of WC/Bath room using CM (1:4) on fair faces of concrete surfaces using WPC where ever required as per manufacturerer's instructions and finishing the surface even and smooth (using extra cement) etc. incl finishing even and fair complete all as specified NOTE -WPC shall be measured and paid separetely.
99.62
-
-
M&L for 40mm thick PCC 1:2:4 type B-0 as in Sunken Portion of WC/Bath room (using 12.5mm graded stone aggregate) complete all as specifed and directed.
2.3
-
-
M&L for cleaning surface of Sunken Portion of WC and applying a coat of bitumen primer @0.30 Kg/Sqm and thereafter applying a tack coat of industrial bitumen 85/25 grade @ 1.20 Kg/Sqm and provn of APP based polymeric membrane minimum weighing 3.60Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (Wt not less than 150 gms/sqm) laid on bituminous surfaces by forced application over entire roof area, with side lap not less 100mm and end lap not less than 150mm complete all specified and directed.
99.62
-
-
M&L for lime conrete with lime mortar 1:5:10 mix using 40mm graded brick coarse aggregate in sunken Portion of WC/bath room complete all as specified and as directed.
13.6
-
-
S&F in repair vitreous China squatting pan, Orissa pattern incl CI spun trap, size 580 x 440 mm white, with integral foot rests squat pattern closet also includes setting the trap and pan in lime concrete (1 lime, 2 sand or surkhi and 5 aggretate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing (thickness as indicated) and making good floor complete all as specified incl cutting to the flush pipe and necessary repair to the floor complete all as specified and directed.
24
-
-
S&F in repair Vitreous China wash downwater closet pan (pedestal pattern), white/coloured (including fixing bolts & flush pipe, plastic water closet seat,black, closed pattern with bottom, and cover and mild steel chromium plated or aluminised hinging device etc.) complete all as specified and directed by Engineer-in-Charge
6
-
-
S&FPVC Flushing Cistern 10 litre capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of MS Brackets,CP flush bend including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed.
30
-
-
S&F vitreous china wash basin, white, flat back, size 550mm x 400mm, including brackets, PVC waste pipe 32mm dia, waste coupling brass, chromium plated and including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs complete all as specified and directed.
22
-
-
S&F in repair wash hand basin of vitreous china counter sunk size 450mm x 350mm x 150mm, PVC waste pipe 32mm dia, waste coupling brass chromium plated and including cutting complete all as specified and directed.
6
-
-
S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm as approved by Engr-in-Charge
26
-
-
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
2
-
-
S&F in repair PVC Connections 15mm size with PTMT Nuts of length 600 mm and fixed, complete all as specified and as directed.
168
-
-
Dismantling of CI /AC pipe 100 mm dia jointed in cement mortar and taking out of trench if required complete all as specified and directed.
220
-
-
Dismantling of CI/AC pipe 75 mm dia or less jointed in cement mortar and taking out of trench if required complete all as specified.
250
-
-
M&L for cast iron spun pipe 100mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints fixed to walls including necessary clamps etc., but except pipes complete all as specified and as directed.
75
-
-
M&L for cast iron spun pipe 100mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints fixed to trenches including necessary clamps etc., but except pipes complete all as specified and as directed.
92
-
-
M&L for cast iron spun pipe 75mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints fixed to walls including necessary clamps etc., but except pipes complete all as specified and as directed.
140
-
-
M&L for cast iron spun pipe 75mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints fixed to trenches including necessary clamps etc., but except pipes complete all as specified and as directed.
136
-
-
M&L for cast iron spun pipe 50mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints fixed to walls including necessary clamps etc., but except pipes complete all as specified and as directed.
48
-
-
S & F CI spun pipe bends 100mm bore of any radius, diminishing pieces or tappers complete all as specified and as directed. (Larger bore measured)
36
-
-
S & F CI spun pipe bends 75mm bore of any radius, diminishing piece or tappers complete all as specified and as directed. (Larger bore measured)
52
-
-
S&F CI spun pipe branch piece 100mm bore, double(eaqual or unequal) with parallel branches and fitted with over access door complete all as specified and directed
15
-
-
S&F CI spun pipe branch piece 75mm bore, single (eaqual or unequal) ordinary or inverted spigot or socketted type with with parallel branches and fitted with over access door complete all as specified and directed
20
-
-
Extra over CI spun pipe fittings if fitted with oval access door 100mm
12
-
-
Extra over CI spun pipe fittings if fitted with oval access door 75mm
26
-
-
M & L for extra over cast iron pipes and fittings if lead joint is provided in lieu of of cement joint for 75mm bore pipe.
29
-
-
M & L for extra over cast iron pipes and fittings if lead joint is provided in lieu of of cement joint for 100mm bore pipe.
19
-
-
S & F CI spun fittings floor tarps of size 75mm with grating including jointing to CI pipe with lead joint fixed in repair incl making joint water tight complete all as specified and directed.
62
-
-
Taking down chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
150
-
-
Taking down chowkats or frames exc 1.50 sqm but n.exc 4.00sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
144
-
-
Taking down shutters of any description exc 1 sqm but not exc 2 sqm each complete all as specified and directed.
24
-
-
Taking down shutters of any description exc 1 sqm but not exc 2 sqm each and refixing in same opening complete all as specified and as directed
34
-
-
S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supply & fixing in opening, complete all as specified and directed.
243
-
-
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
61.39
-
-
S&F 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed
0.27
-
-
S&F Pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified and directed.
372.4
-
-
S&F factory made 30mm thick flush shutters, solid core construction, with block board core and plywood face panesls, commercial type on both sides, complete all as specified and as directed.
164.41
-
-
S&F 35 mm thick glazed and skelton shutter open rebated and prepared to receive glass, gauge etc,(with out sash bars) edges of framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Sec-8, clause 8.23(a) 2nd class hard wood (Shisham) complete all as specified and as directed
140.3
-
-
S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed 300 mm long complete all as specified and directed.
144
-
-
S&F 150 mm overall length floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed
144
-
-
S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed
98
-
-
S & F aluminium handle, cast type anodized 150mm size complete all as specified and directed.
588
-
-
S & F 200 mm long aluminium anodized barrel tower bolts of extruded section lcomplete all as specified and as directed.
686
-
-
S&F Butt hinges medium weight cold rolled mild steel of 100mm long complete all as specified and directed.
882
-
-
S&F powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
180
-
-
S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed.
8
-
-
S&F aluminium sheet powder coated of thickness not less than 4mm thick to be in sealed as panel in aluminium door complete all as specified and directed.
5
-
-
Sheet glass 4.8mm thick tinted glass and glazing in squares exc 0.5 Sqm in each Pane complete all as specified and directed.
7
-
-
S&F powder coated aluminium windows and ventilator shutters, side hung type without sash, bars aluminium sections weighing 0.55 Kg/m including necessary jointing cleat, glazing clips, rubber packing anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (01 Nos) hinges type B-21 100mm long (2 Nos) suitable handles (1 No) complete all as specified and directed.
69
-
-
S&F steel windows with side hung shutters including box type hinge with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed
138.24
-
-
ditto- all as per item No 99 above herein before but without glazing bars , complete all as specified and directed
138.24
-
-
S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each pane complete all as specified and directed.
82.94
-
-
S&F figured glass pin headed type and glazing with oil putty in square n. exc 0.5 sqm in each pane 3mm thick glass complete all as specified and directed.
15
-
-
S&F Aluminium Powder coated designer grill of 5.5 mm dia and aperture of 75 mm fixed with and including aluminium powder coated flat section of size 50 x 1.5 mm and suitable aluminium anodised frame F/H section complete all as specified and directed.
34
-
-
S&F steel ventilators with top hung shutters incl hinges steel peg stay complete all as specified and directed
21.96
-
-
S&F mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with aluminium staple and around all beading complete all as specified and directed
147
-
-
S&F as in repair mild steel wire cloth, .45 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with aluminium staple and around all beading complete all as specified and directed
10
-
-
S&F for door closer aluminium extruded section hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed.
4
-
-
S&F 12mm thick veneered decorative plywood , grade - 1 (with BWR resin ) with decorative face venners on both faces fixed with screws to timber frame work, colour and pattern as approved including external teak wood lipping (prelaminated one side with decorative choice lamination & other side balancing white lamination) complete all as specified and directed.
381.4
-
-
M&L for stainless steel telescopic channel for drawers not less than 45 cm long complete all as specified and directed.
48
-
-
S&F Push to open Magnetic Catches for kitchen cabinet doors complete all as specified and directed.
240
-
-
S&F Stainless sensys soft close 0 crank concealed slide on cabinet Hinge, a base of 12.5 (crank 0 degree) with mounting plate (shutter thickness 15-24mm) complete all as specified and directed
20
-
-
S&F Contnuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) 30mm complete all as specified and directed.
360
-
-
S & F as in repair hasp and staple 150mm size of aluminium anodised complete all as specified and directed.
50
-
-
S&F Stainless Steel Decorative Cabinet Handle 100 mm complete all as specified and directed.
240
-
-
M&L for 0.9mm thick decorative laminate type 1 of surface finish, colour and patters as approved, fixed with approved adhesive as per manufacturer's insturctions, complete all as specified and directed.
60
-
-
S&F in repair Decorative Stainless steel tubular curtain rail of 25mm dia incl six nos curtain ring per running mtr and one number of brackets on each end and one no of globe on each end of the rod per opening of door / window complete all as specified and directed.
385
-
-
M&L 75mm thick Cement concrete type B- 2, 1:2:4 (using 40mm graded stone aggregate) complete as in level course with finishing in cement concrete surface even and rough to receive screed bed complete all as specified and directed.
250
-
-
M&L 75mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection incl finishing even and smooth w/o using extra cement complete all as specified and directed.
325
-
-
M&L for providing PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops rouded or chamfered on edges complete all as specifed and directed.
18.7
-
-
M&L For Roof tiles, Mangalore pattern, interlocking at side joints on chhajja top, over 15mm thick screed bed or bedding in CM 1:4 complete all as specified and directed.
180
-
-
M&L for providing Precast cement concrete type B0 1:2:4 (using 12.5mm graded aggregate) set in CM 1:4 in louvers and jallies, 40mm thick (measured solid), including all mouldings and interlocking pillars complete all as specified and directed.
5
-
-
Taking down cement plaster on brick or stone walls etc raking out joints hacking for key scrabbing down water etc complete all as specified and directed.
6330
-
-
M&L for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces using WPC where ever required as per manufacturerer's instructions and finishing the surface even and smooth (without using extra cement) etc. complete all as specified NOTE -WPC shall be measured and paid separetely.
2680
-
-
Supply only WPC (ISI Marked) complete all as specified and directed.
104.48
-
-
M&L for rendering 10 mm thick on fair faces of brick work in CM 1:6 finished even and fair without using extra cement complete all as specified and directed.
3250
-
-
M&L for rendering 10mm thick in CM (1:3) on fair faces or concrete ceiling surfaces finished even and fair without using extra cement complete all as specified and directed.
400
-
-
M&L for 2mm thick wall care putty on new plastered surfaces of wall, and apply two coat of exteriar emulsion paint (Apex) over a coat of primer complete all as specified and directed
450
-
-
M&L for preparation, cleaning scraping of old treated surfaces of wall and apply 2mm thick wall care putty and apply two coat of Exeriar emulsion paint (Apex) over a coat of primer complete all as specified and directed.
347.39
-
-
Preparing new plastered or unplastered surfaces of walls and applying 2mm thick wall care, putty and two coats of distemper oil emulsion, white or tinted over a coat of primer, complete all as specified and directed.
3600
-
-
Preparing old treated surfaces of walls and applying 2mm thick wall care, putty and one coats of distember oil emulsion, white or tinted , complete all as specified and directed.
640
-
-
M&L for new plastered surfaces of wall, and apply two coat of exteriar emulson paint (Apex) over a coat of primer complete all as specified and directed
2650
-
-
M&L for preparation, cleaning scraping of old ttreated surface of wall and apply two coat of exteriar emulsion paint (Apex) over a coat of prmer complete all as specified and directed
30
-
-
M&L preparing new plastered or unplasted surfaces of ceiling and applying two coats of white wash over a coat of chalk whiting, complete all as specified and directed
601
-
-
M&L preparing, washing , rubbing down and stopping of distempered and painted surfces of old/treated surfaces of plastered or unplastered surfaces of ceiling and applying one coats of white wash, complete all as specified and diretecd
557.21
-
-
M&L for applying two coats of synthetic enamel painting over a coat of pink primer on new wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of surfaces complete all as specified and directed.
504
-
-
M&L for one coat of synthetic enamel paint to old decorated wooden surfaces of any description over 10 cm in width of girth not otherwise described including preparation of surface complete all as specified and directed.
30
-
-
M&L for two coats of synthetic enamel painting over a coat of red oxide zinc chrome primer on new steel surfaces over 10cm width or girth including preparation of surface complete all as specified and directed.
250
-
-
M&L for one coat of synthetic enamel paint to old decorated steel surfaces of girth exc 10cm including preparation of surfaces complete all as specified and directed.
120
-
-
M&L for PCC 1:3:6 type C-1(using 20mm graded stone agg) for bed block for fixing hold fast complete all as specified and directed.
0.2
-
-
Demolition of cement concrete (reinforced), cutting scraping and cleaning reinforcement, and M&L for providing RCC 1:2:4 type B1 including form work and scaffolding upto 6.00 m height in chajjas, parapets, roof projections and similar RCC works complete including rendering 10 mm thick in CM 1:3 finished evern and smooth on RCC surfaces. (New reinforcement to be provided shall be measured and paid for separately).
4
-
-
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
67.71
-
-
S&F framed work such as gate, grills,gratings, etc with ends of bars shouldered and / or riveted or forged into spikes; framed guard ; barred iron doors; ladders ; framed balusters; walk ways; railing and simillar work Con-forming to Fe 290 Gde E-165 complete all as specified and directed.
6720
-
-
S&F Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats brackets etc.
51
-
-
Dismantling of brick tilesor terracing tiles, single layer on roofs complete all as specified and directed.
784.62
-
-
M&L 50mm thick (laid in two equal layer of 25 mm thick) in PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) including finishing even and fair as in roof padding and prepare surface to receive treatment complete all as specified and directed.
784.62
-
-
S & F 1.4mm dia galvanised steel wire netting 20mm X 20mm mesh size , made up into matteresses or cages, lapped , wired and laid in position ,incl fixed with tinned tacks of wire staples complete all as specified and directed.
784.62
-
-
M&L 40 mm thick brick tiles laid over and including 15mm thick bedding layer in cement mortar 1:6 and jointed, grouted and pointed flush in CM 1:3 mixed with STP No-1 liguid @ 200ml of per 50 kg of cement complete all as specified and directed.
784.62
-
-
M&L for APP based polymeric membrane minimum weighing 3.60Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( Wt not less than 150 gms /sqm ) laid on bituminous surfaces by forced application over entire roof area, sunken portion with side lap not less 100mm and end lap not less than 150mm incl apply a tack coat of industrial bitumen complete all specified and directed.
834.09
-
-
M&L for applying a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm over a coat of bitumen primer @ 0.30 Kg/ sqm including cleaning surfaces etc complete all as specified and directed.
834.09
-
-
S & F in repair Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed.
78
-
-
S&F in repair 20mm dia Gun-metal, fancy type, chromium plated with long shank and cup (concealed type) globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
54
-
-
Dismantling water tanks of capacity exc 500 but not exc 1000 ltr capacity complete all as specified and directed.
26
-
-
S&F rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 1000 ltrs capacity with and including 25mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.
26
-
-
S&F Steel Water Tubing 40mm dia (Bore), Galvanised, ‘Medium Grade’ with allk fittings, fixed on sunken , complete as all specified and as directed.
12
-
-
S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed including necessary fittings like socket, bend, elbow, single/double tee etc in any length with rubber ring joints fixed with clamps of flat iron and including bolts and nuts and securing ends of stays to wall or roof and making good with cement mortor 1:3 or with PCC 1:2:4 including two coats of cement base paint /colour wash complete all as specified and directed.
180
-
-
Excavating in post holes as in hard/dense soil (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.
48
-
-
M&L Cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) as in foundations filling and mass concrete all as specified and directed.
9.05
-
-
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.
6414
-
-
S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering /cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
410.26
-
-
Dismantling plain or corrugated steel sheeting, any gauge, thickness as in roof etc., coverings complete etc all as specified and directed.
152
-
-
Supply and Fixing plain galvanized mild steel sheeting as in ridges, valley gutters, covering to crumple etc using 0.80mm thick sheet, with grade of zinc coating 275 complete all as specified and directed.
22.6
-
-
Surface excavation not exceeding 30 cm deep and average 15 cm deep and getting out in hard/dense soil complete all as specified and as directed.
714
-
-
M&L 75 mm thick PCC (1:4:8 ) type D-2 using 40mm graded stone aggregate as in sub base finished even and rough complete all as specified and as directed.
398
-
-
M&L for 75mm thick Plain Cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in floors laid in bays and form work if any complete all as specified and directed.
398
-
-
M&L for Forming contraction (Dummy) joints 65mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.
3
-
-
Dismantling of wall and ceiling boards (fiber, pulp, insulation etc,) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.
55
-
-
S & F for Aluminium anodised snap grid frame work for false ceiling comprising of following section for making partitions of 600 X 600 mm size fixed to walls with rawl plugs and screws and hang to roof with s 6 mm dia. G.I. (upto
1200mm length) adjusting levelfixed to roof slabs by means of
ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long
and expansion hold fasteners12.5mm dia. 40mm long complete all as specified. size of main tee shall be :-
(i)37mmx24mmx0.3mm thick,
(ii)Cross Tee 28mmx24mmx0.3mm thick and (iii)Wall angle 24mmx24mmx0.3mm thick.
55
-
-
M&L for Removing excavated soils to a distance exc 250m but n exc 500m and depositing where directed.
47.4
-
-
M&L 100 mm thick PCC (1:4:8 ) type D-2 using 40 mm graded stone aggregate as in sub base finished even and rough complete all as specified and as directed.
316
-
-
M&L chequered cement concrete tile 20cm x 20cm x 25 mm thick with white cement & pigment, set, jointed and pointed in neat cement slurry in floors, laid over 15 mm thick bedding layer in Cement Mortar 1:6 complete all as specified and as directed.
40
-
-
M&L for providing PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in roof kerbs or mud stops rouded or chamfered on edges complete all as specified and directed
1.8
-
-
M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.
316
-
-
M&L Excavation in trenches not exc. 1.50m wide and not exc. 1.50m in depth for foundation etc or for manholes cesspits, shafts laying of cable etc not exc 10 sqm on plan and getting out in hard / dense soil complete all as specified and directed.
198
-
-
M&L for PCC 1:2:4 type B-1 (using 12.5mm graded stone agg) as in coping,benching of manhole all as specified and directed.
1.4
-
-
M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished fair and smooth with using extra cement includig mixing of water proofing compound of approved make complete all as specified.
32
-
-
M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished fair and smooth without using extra cement complete all as specified and directed.
14
-
-
Removing excavated soil to a distance n.exc 50m where directed at a level n.exc 1.50m above the starting point complete all as specifed and directed.
52.4
-
-
Return filling , in including spreading , levelling , watering and levellng and well ramming in layers not exc 25 cm compleate all as specified and directed.
145.6
-
-
Demolition and breaking up drain pipes (SGSW, AC or RCC) of internal dia 150mm, set in cement mortar complete.
181
-
-
Cutting holes into or through brick walls built in brick walls built, in cement mortar or cement lime morta and stone walls built in lime mortar or walls of lime concrete n.exc 150 sqcm complete
20
-
-
M&L for cement concete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes of 160 mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.
181
-
-
M&L for unplasticised PVC pipe 160mm dia type 'B' with wall thickness 4mm (Min) of pressure rating 4 KN/Sqm laid in trenches and jointed with cement solvent including testing complete all as specified and directed.
181
-
-
M&L for precast cement concrete type B-1 1:2:4 (using 20mm graded stone agg) as in man hole cover set in cement mortar 1:6 complete all as specified and directed .
0.71
-
-
ITEM OF E/M
-
-
-
M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross section area 16 Sqmm 2 core laid in trenches or passing through pipes/ducts and incl the disturbence surface of road making good with using PCC complete all as specified and directed.
160
-
-
M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross section area 35 Sqmm 3.5 core laid in trenches or passing through pipes/ducts and incl the disturbence surface of road making good with using PCC complete all as specified and directed.
300
-
-
M&L for dry clean sand filling in trenches below and around under ground cable cushioning complete all as specified and directed.. Note :- Thickness of sand cushioning shall be measured after punning.
32.4
-
-
Supply and fix unreinforced PCC cable cover class LV type I of size 0.25x0.15x0.04mm
2663
-
-
Supply and Fixing steel tube Light grade galvanised 50 mm bore with all fittings for protection of UG cable under road/culvert and fixing on wall with saddle, screw complete all as specified and directed.
52
-
-
M&L panel box concealed in wall , double door type with die cast type made all of 18 guage CRCA sheet of suitable size for fixing of KWH meters MCCB, MCB, Bus bars etc as per IE rules comprising of following and necessary wiring for MCBs, meters- 05 Nos. with Locking arrangements and optical glass over the electronic meter
(a) S&F MCCB 100 Amps 415 volt, TPN, 25 KA - 01 No
(b) S&F MCB SPN 63 Amps - 5 Nos
(c) Space and mounting brackets for fixing of 5 Nos single phase KWH meters.
(d) Fixing only the existing electronic meter as per existing sl No. of qtr.
8
-
-
M&L for Earthing complete with galvanized sheet earth plate electrodes 60x60x6.3 mm thick buried directly in ground (earth pit not less than 2. 25mtr deep below ground level) with top edge of plat not less than 1.5 mtr below normal ground level connected to galvanized iron strip 25 x 4 mm as earthing lead by means of bolts, nuts , check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 and including excavation and earth work, GI pipe light grade 15 mm bore for protection of GI wire from earth electrode to and incl the earth test point of galvanized Iron/steel of size 75x75x 25mm, supplying and laying charcoal dust, common salt, PCC 1:2:4 type B1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced with 6 mm dia TMT bars @ 75mm C/C both ways with MS handle 12mm dia, PGI funnel and wire mesh,20 mm dia GI pipe light grade for watering and connected to earth test point including brazing at all joints except at test point and testing complete all as specified and directed by Engr-in-Charge.
8
-
-
Taking down carefully aluminium/copper wiring of any size (for light, fan, socket or power etc complete) including fixture and fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights etc and making good disturbed surfaces of wall, roof etc to match with existing surface.
1273
-
-
Supply & Fixing point wiring for one light point/ fan (independent) point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia ) with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed Note:- wiring shall be done in colour coding as directed by Engineer in charge.
729
-
-
All as per item No.221 herein before but one light point controlled by one two way switch
6
-
-
All as per item No.221 herein before but one socket outlet 5 Amps on the same board.
116
-
-
All as per item No.221 herein before but one 3 pin socket outlet 5 Amps independent.
254
-
-
All as per item No.221 herein before but one bell point controlled by one bell push switch.
24
-
-
All as per item No. 221 above but with 2.5 Sq mm two single core and 2.5 Sq mm one single core as earth wire for 5/15 Amps socket.
144
-
-
All as per item No. 221 above but with 4 Sq mm two single core and 4 Sq mm one single core as earth wire for AC Point.
6
-
-
Supply & Fixing lamp holder (modular type) PVC insulated body with back plate for angle/battern fitting complete all as specified and directed.
214
-
-
Suppy & Fixing switch piano flush type single pole, one way 5 Amp complete all as specified and directed.
919
-
-
Supply & Fixing switch piano, flush type single pole 15 Amp complete all as specified and directed.
114
-
-
Suppy & Fixing switch piano flush type single pole, two way 5 Amp complete all as specified and directed.
10
-
-
Supply & Fixing socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type complete all as specified and directed.
114
-
-
Supply & Fixing socket outlet 2 in 1, 3 pin, 5 Amp flush type complete all as specified and directed.
298
-
-
Supply & Fixing Bell push, flush type , 5 Amp.
22
-
-
Supply & Fixing steped type electronic fan regulator flush type on the existing phenolic laminatedsheet etc.
68
-
-
Supply and fixing bell electric multi musical type AC 230 volts, 50 Hz.
24
-
-
S&F ceiling rose surface bakelite 3 terminal with base plate.
514
-
-
Supply and fixing of following rating of modular type ,white polycarbonate,switches, sockets, fan regulator suitable for 250V, AC, 50Hz.Electrical supply and as directed by Engr-in-Charge.
-
-
-
(a) 6 Amp one way switch
180
-
-
(b) 6 Amp two way switch
2
-
-
(c) 6 Amp 2/3 Pin combined socket shuttered
72
-
-
(d) Modular Switch 1 way 16 Amp, 1 Module
30
-
-
(e) Modular Switch socket combination 16Amp, 6 Pin, 3 Module
30
-
-
(f) 6 Amp bell push switch modular type
2
-
-
(g) Steped type electronic fan regulator modular, 120W-2 module
14
-
-
Supply and fixing of following sizes of modular front plates, white with frame on existing boxes complete as required.
-
-
-
(a) 2 Module
6
-
-
(b) 3 Module
70
-
-
(c) 4 Module
14
-
-
(b) 6 Module
10
-
-
(c) 8 Module
10
-
-
Supply and fixing anodised rust proof 18 SWG MS box, flush type of following sizes (to be of same make as modular switches and sockets) to be recessed in wall /gypsum partition complete as required :-
-
-
-
(a) 75mm x 105mm x 50mm deep (1-2 Module)
6
-
-
(b) 75mm x 105mm x 50mm deep (3 Module)
70
-
-
(c) 75mm x 105mm x 50mm deep (4 Module)
14
-
-
(d) 75mm x 210mm x 50mm deep (6-8 Module)
20
-
-
Material and labour for Sub main wiring with 2 run of 10 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit (ISI marked) Heavy grade, 20 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 10 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified. Note :1 The cost of earth wire is included in the quoated rates. 2. Two run of 10 sqmm, one run of 10 sqmm and one run of PVC conduit will be measured as one unit ie one running metre”
45
-
-
Material and labour for Sub main wiring with 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit ( ISI marked) Heavy grade, 20 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified. Note :1 The cost of earth wire is included in the quoated rates. 2. Two run of 6 sqmm, one run of 6 sqmm and one run of PVC conduit will be measured as one unit ie one running metre”
260
-
-
Material and labour for Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit (ISI marked) Heavy grade, 20 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 4Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified. Note :1 The cost of earth wire is included in the quoated rates. 2. Two run of 4 sqmm, one run of 4 sqmm and one run of PVC conduit will be measured as one unit ie one running metre”
120
-
-
Supply and fixing LED lights fitting 1x 20W (warm/milky white as required on site), 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and life of tube light not less than 50,000 hours.complete all as specified and directed.. Note:- LED tube light shall be purches to get minimum 2 year warrenty of material from manufracturer.
294
-
-
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible opper conductor cable of suitable size complete
30
-
-
Supply & Fixing sheet metal enclosure for DBs(double door type) single pole and neutral 4 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .
2
-
-
- ditto- but 8 way
21
-
-
- ditto- but 12 way
6
-
-
Supply & Fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 TO 63 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed .
31
-
-
Supply & Fixing 240V, 10KA 'B' curve miniature circuit breaker (MCB) of single pole 5 to 32 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed .
184
-
-
M&L for taking down ceiling fans / wall mounted fans of any size / sweep after disconnecting the wire from existing ceiling rose and refixing the same after painting the same with synthetic enamel paint by spray machine including filter after cleaning dust, taking out burnt/damaged winding, bushes & cleanig of stator and rotor incl etc. Rewinding with 26/27 SWG of enamelled copper winding wire replacement of bearing /bushes, condencer 2.5/4 mfd handing and testing of fan with and including provision of 23/0.0076 copper flexible core twin core not less than 1.5 meter in length and make the fan operational with a guarantee period of one year after installing the repair fan complete all as specified and directed.
60
-
-
Supply and Fixing propeller type AC ventilating fans 230 volts, 50 C/S heavy duty 1400 RPM, 300 mm sweep (Exhaust fan) metal body and blades protected by metal guards,Bird guard for safetry,two sleeves bearings, with frame and louvers complete including the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core white 23/.0076 copper cable, rubber insulated from ceiling rose to exhaust fan motor complete all as specified and directed.
24
-
-
S & F exhaust fan made of sturdy Engineering plastic type ISI Mark, copper winding of sweep 250 mm size complete with louvers including cutting opening through brick/stone /PCC block wall, making of holes and grouting of suitable size of nuts and bolts for 250 mm exhaust fan and making good dismantled portion and making connection with wire of suitable size and connecting accessories complete all as specified and directed.
28
-
-
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories (incl ceiling clamp/hook fixing in ceiling/roof with fashner/nut & bolts), 230 V, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)complete all as specified and directed by Engineer-in-Charge.
22
-
-
S&F sheet metal enclosure with socket plug top and MCB single pole and netural enclosure with a two pin and earth plug and socket complete with one double pole MCB 20 Amp 240 Volts complete.
6
-
-
S & F LED light fitting 1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
Note:- Contractor shall submit 2 year warrenty of material from manufracturer alongwith purchase voucher.
35
-
-
S & Fixing LED Bulb 9 watt all as specified and directed by Engr-in-Charge.
214
-
-
Supply and fix water heater storage type electric supplied and installed complete of capacity 25 ltrs heating element upto 2 KW, BEE 5 Star rate complete including making connection with industrical socket, ultra thick SS inner tank of superior 304 grade, Fire retardant ISI Mark supply cord, Rust & shock proof ABS body, Compact & easy to install and proper hanging on nut bolts washers grouted on wall and PVC pipe for connection of hot and cold water complete all as specified and directed by Engr-in-charge.
28
-
-
Supply and fixing LED flood light 70 watt, 230 V AC out door type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp and average life of flood light not less than 50000 hours, including clamps, nut, bots, bracket made of GI pipe light grade dia 32mm, length not less than 1.5m, bent to shape for LED light fitting for fixing of LED light on electric LT pole including 2 sqmm PVC twin core aluminium cable from conductor to street light not less 2.0 metre , testing to satisfaction of Engineer in charge complete all as specified and directed.
Note: The Sch of Credit of Amount Rs. 4,50,861.70 shall be deducted from the amount quoted.
8
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%