Military Engineer Services Tender

M&L for bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% binder content of bitumen with viscosity grade VG-30 by weight of total mix, rolled and compacted to required camber and gradient complete with 8 to 10 tonnes power roller to required complete all as specified and directed. Note :(i) Design Mix for SDAC shall be carried out through an authorised testing lab and the cost of testing shall be included in quoted rate. (ii) Aggregates for Bituminous works shall confirm to clause No 20 B 2.5 of SSR 2009 Part- I (Specifications). (iii) Based on job mix formula, in case the binder content (i.e. Bitumen) is less than the content specified under these items then a minus adjustment @ Rs 70/- per kg of bitumen (less consumed) shall be applied on the quoted rate of contractor against these items, hence the quoted rate of contractor shall be reduced based on less content of bitumen required as per job mix formula. However, no price adjustment on plus side shall be made for increase of quantity of bitumen in case of required as per job mix formula.

M&L for hot thermal plastic compound (paint) 2.5mm thick including reflecting glass beads incl cost of material, labour, machinery, T&P etc required for proper completion of work incl all charges. The finished surface to the lebel uniform and free from streaks and holes as per MORTH specification No-803 as per IRC paintig lines, dashes, arrows, letters etc on roads, Pavement and the likes exc 10 cm vide road marking, paint white and golden yellow complete all as specified and directed.

M&L for providing precast cement concrete in type B1 1:2:4, type B-1 (using 20mm graded aggregate) in kerbs and edging to road, devider and foothpath etc incl necessary earthwork with plain fair faces, incl chamfered weathering, throating etc and setting in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and thrown away at low laying area, distance & location as directed by GE complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40 mm stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigment over and including 25-30mm thick stone dust cushioning and taking down and removing old paving blocks complete all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.