Military Engineer Services Tender

Supply &Fixing in replacement of surge protection device 10 KV 240 Volts suitable for LED street light fitting complete all as specified and directed.

Supply & Fixing in repair/replacement of power contactors 4 pole 40-80 Amps AC3 in control of timer as per existing one etc complete incl taking existing and necessary connection complete all as specified and directed.

Supply & Fixing in repair/replacement of power contactors 4 pole 9-25 Amps AC3 in control of timer etc complete as per existing oneincl taking existing and necessary connection complete all as specifeid & directed.

Supply anf fix in repair/replacement of Timer digital type 1P Module, 24 hours program ,programmable every 15 min ,back up of 100 hours ,current cap 16 a with 1 change over (1 CO) complete all as specified & directed incl taking out old unser existing timer=.

Supply & Fixing in repair/replacement of coil for contactor 9 Amps to 25 Amps as per existing sample complete incl all as specifeid & directed taking out existing and necessary connections complete all as specified and directed.

Supply &Fixing in repair/replacement of coil for contactor 40-80 Amps as per existing sample complete all as specifeid & directed incl taking out existing and necessary connections complete all as specified and directed.

Supply anf fix in repair/replacement of MCB SPN, 240 Volt, C curve 10 KA ISI Marked , 20-25 Amps in existing DBs complete all as specified and directed.

Supply anf fix in repair/replacement MCB ,TPN,415 Volt, C curve 10 KA ISI Marked ,63Amps complete all as specified and directed.

Supply &Fixing in repair/replacement of Driver for Solar AIO 20W 40 WP 12.8V 18/24Ah NG suitable Solar light fittings as per sample complete all as specifeid & directed

Supply & fixing in repair/replacement Battery Power Pack with BMS 12.8 V 18/24A h for LORA 85076000 all as specifeid & directed incl taking out existing and necessary connections complete all as specified and directed.

Supply & Fixing in repair/replacement only of 3 core 1.5 Sqmm copper conductor cable in existing pole incl making holes for cable entry and exist near to light fitting and junction box complete all as specified and directed.

Supply & Fixing in repair/replacement GI bracket made out of 40 mm GI pipe medium grade bend for fabrication to shape as required length of pipe 1.2 mtr with necessary fixing arrangement by means of MS clamps 02 Nos not less than 50x6 mm MS flat duly painted, nuts, bolts and washer complete all as specified and directed.

Supply anf fix in replacement Street light TIMER control panel ,110 Amps,3 pole /440 Volt ,Digital time switch with suitable cap of contactor & MCBs ,pole/wall mounting made out of 3.15mm CRCA sheet duly power coated with locking arrangement including internal wiring complete with bypass arrangements complete all as specified and directed

Supply anf fix in replacement Street light TIMER control panel ,40 amp single pole /230 Volt ,Digital time switch with suitable cap of contactor & MCBs ,pole/wall mounting made out of 3.15mm CRCA sheet duly power coated with locking arrangement including internal wiring complete with bypass arrangements complete all as specified and directed

Supply and fix in replcament integrated Solar street light All in one comprising of high efficiency LEDs (120 lm/w) ,20 W ,efficincy monocrystalline Solar panel of 40 Wp, new age Lithium ferro phosphate battery of cap 12.8/24 Ah,silicon encapsulated high efficiency MPPT chage controller,uniquely designed aluminium housing for better heat dissipation & stragically placed perforations allowing natural air passive circulation within & into the housing for improved thermal management of internal components including mounting bracket in built PIR Motion sensor including galvanised steel pole in built as per suitable size & lenth complete all as specified and directed.

Supply anf fix in replacement flood light ,80 W,Outdoor type with high power LED's as light sources . Energy saving environmental friendly, long life, exclusive innovative epoxy powder coated die-cast aluminium housing with dedicated heat sink and toughened glass with inbuilt control grar woth IP66,CCT :5700K,Efficacy : 100 Im/W,Impact resitace of IK07 and integrated driver with 5 KV inbuilt surge protection complete all as specified and directed incl taking out existing and necessary connections complete.

Supply anf fix in replacement flood light ,120 W,Outdoor type with high power LED's as light sources . Energy saving environmental friendly, long life, exclusive innovative epoxy powder coated die-cast aluminium housing with dedicated heat sink and toughened glass with inbuilt control grar woth IP66,CCT :5700K,Efficacy : 100 Im/W,Impact resitace of IK07 and integrated driver with 5 KV inbuilt surge protection complete all as specified and directed incl taking out existing and necessary connections complete.

Supply anf fix in replacement flood light ,200W OR higher Outdoor type with high power LED's as light sources . Energy saving environmental friendly, long life, exclusive innovative epoxy powder coated die-cast aluminium housing with dedicated heat sink and toughened glass with inbuilt control grar woth IP66,CCT :5700K,Efficacy : 100 Im/W,Impact resitace of IK07 and integrated driver with 5 KV inbuilt surge protection all as specifeid & directed incl taking out existing and necessary connections complete.

Supply anf fix in relacement Integral LED Street Light Luminaire comprising of pressure die cast aluminum housing heat resistant toughened glass with frame IP-65/66 protection road way luminaries with high power LED 60 watt with Efficacy 110 Lm/W,CCT :5700 K with potted 5KV internal and 10 KV external inbuilt surge protection including taking out old unser st lts

Supply anf fix in relacement Integral LED Street Light Luminaire comprising of pressure die cast aluminum housing heat resistant toughened glass with frame IP-65/66 protection road way luminaries with high power LED 72 watt with Efficacy 110 Lm/W,CCT :5700 K with potted 5KV internal and 10 KV external inbuilt surge protection including taking out old unser st lts

Supply anf fix in replacement Post top latern LED type 20 Watt ,230volts AC outdooor type with decorative post top for 360 drgree indirect light IP 65 protection with impact and corrossion resistanat complete with driver and lamp complete with suitable size reducer or fixing arrangement to fix to existing one for park,garden,heritage site & gatesincluding taking down existing old pattern unserviceable light fittings complete all as specified and directed.

Supply anf fix in replacement LED bollard type fitting 10 watt capacity inverted Pyramid Tripod type with soft 360 degree distribution with IP 65 protection ,complete with necessary PCC foundation including taking down existing old pattern unserviceable light fittings complete all as specified and directed. NOTE : PCC Shall be paid &measured in the relevent items .

Supply and fix in replacement LED bush light ,9 Watt, 3000K , Efficacy 80 lm/w ,made with single piece pressure die-cast aluminium housing and ip 65 degree of protection suitable for outdoor applicatios like garden,tree uplighting including suitable fixing arrangements complete all as specified and directed.

Material and labour in repair/replacement for service cable 6 sq mm twin core Weather proof aluminium multistranded conductor cable PVC sheathed PVC insulated round/flat incl taking out existing unser cable complete all as specified and directed.

Description all as per Item No 27 above but 10sqmm twin core ,weather proof complete all as specified and directed.

Supply anf fix in repair/replacement PVC conduit medium grade 20 MM dia for drawing WP cable incl fixing with suitable size of clamps complete all as specified and directed.

Supply anf fix in repair/replacement for DK Thermoplastic cable Junction boxes of size 260x210x116mm,IP 65 with metric knockouts for cable entry , weather proof for outdoor installation & inclu cable glands with four terminalSupply anf fix our busbar fixing on eight nos DMC insulators for terminating with one incoming & one outgoing armoured UG cable of size 10 to 35 qmm x 4/3.5 core with suitable size of lugs & provn for fixing of one no MCB,SPN/TPN & fixed to the PCC/Steel Poles by means of suitable size of clamps with nuts & bolts & all as specified and directed .

Supply anf fix in repair/replacement for DK Thermoplastic cable Junction boxes of size 167x125x82 mm,IP 65 with metric knockouts for cable entry , weather proof for outdoor installation & inclu cable glands with four terminals & two busbar fixing on 04 nos DMC insulators for terminating with one incoming & one outgoing armoured UG cable of size 4 to 10 sqmm x 2 core with suitable size of lugs & provn of fixing of one no MCB SP & fixed to the PCC/Steel Poles by means of suitable size of clamps with nuts & bolts & all as specified and directed .

Material &Labour for painting to steel pole any type after scrapping and rubbing down with sand paper prepation of old or new surface of poles including pole fitting such as cross arms of any description ,anti climbing devices,nut,bolts etc with two coat of aluminium paint incuding numbrring of pole as per existing complete all as directed and making 5 nos of alternative strips of black,yellow paint of 30 Cm wide complete all as specified and directed.

Dismantling existing steel poles/stuts ,any size carefully for reuse inclding necessary excavation .demolition of concrete etc and removing the old unserviceable poles/rubbish off the premises etc complete all as specified and directed.

Fixing only of street poles of any length and dia retrieved against respective dismantling items no 35.00 including loading ,shifting ,unloading errection in true vertical position complete all as specified and directed. Note : excation wks,PCC for fixing of pole shall be measured in the relivent items

Material & Labour for Cutting existing road/hardstand of any type by using crow bar chisel uprto a depthof 30 cm for laying GI pipe including making good the surface by returning filling watering ramming in layers 150 mm thick PCC 1:2:4 over 200 mm thick hard core of broken bricks/stones over returning filling watering ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Material & Labour for removing the herb, shrubs, creepers etc on the LT/HT Poles(sigle/two/four) the to keep poles/structures always clean and tidy condition. Note:- All the Poles shall be kept clean throughout contract period by repeatedly by removing the grass / shrubs as many times reqd depending on the growth of grass measurement will be measured & paid only once throughout contract period only once.

Taking down unserviceable/damaged LT/HT Cable from treches/nalah or road crossing etc retreived from item no 38 to 44 complete all as specified and directed.

Material & Labour for LT underground cable, heavy duty cable of size 240x3.5 core, 1100 Volts, XLPE insulated and PVC sheathed, armoured, multi-stranded aluminium conductor cable conforming to IS , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly protected in galvanised steel pipe of suitable sizes all bare conductor of cable including cable gland , lugs,jointing taplon tapes etc at both ends complete all as specified and directed. Note : Excavation, earth work, cable sand cushioning & cable protection shall be measured separately under relevant items of this schedule.

Material & Labour for LT underground cable, heavy duty cable of size 120x3.5 core, 1100 Volts, XLPE insulated and PVC sheathed, armoured, multi-stranded aluminium conductor cable conforming to IS , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly protected in galvanised steel pipe of suitable sizes all bare conductor of cable including cable gland , lugs,jointing taplon tapes etc at both ends complete all as specified and directed. Note : Excavation, earth work, cable sand cushioning & cable protection shall be measured separately under relevant items of this schedule.

Material & Labour for LT underground cable, heavy duty cable of size 95x3.5 core, 1100 Volts, XLPE insulated and PVC sheathed, armoured, multi-stranded aluminium conductor cable conforming to IS , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly protected in galvanised steel pipe of suitable sizes all bare conductor of cable including cable gland , lugs,jointing taplon tapes etc at both ends complete all as specified and directed. Note : Excavation, earth work, cable sand cushioning & cable protection shall be measured separately under relevant items of this schedule.

Material & Labour for LT underground cable, heavy duty cable of size 50x3.5 core, 1100 Volts, XLPE insulated and PVC sheathed, armoured, multi-stranded aluminium conductor cable conforming to IS , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly protected in galvanised steel pipe of suitable sizes all bare conductor of cable including cable gland , lugs,jointing taplon tapes etc at both ends complete all as specified and directed. Note : Excavation, earth work, cable sand cushioning & cable protection shall be measured separately under relevant items of this schedule.

Material & Labour for LT underground cable, heavy duty cable of size 25x3.5 core, 1100 Volts, XLPE insulated and PVC sheathed, armoured, multi-stranded aluminium conductor cable conforming to IS , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly protected in galvanised steel pipe of suitable sizes all bare conductor of cable including cable gland , lugs,jointing taplon tapes etc at both ends complete all as specified and directed. Note : Excavation, earth work, cable sand cushioning & cable protection shall be measured separately under relevant items of this schedule.

Material & Labour for LT underground cable, heavy duty cable of size 16x4 core, 1100 Volts, XLPE insulated and PVC sheathed, armoured, multi-stranded aluminium conductor cable conforming to IS , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly protected in galvanised steel pipe of suitable sizes all bare conductor of cable including cable gland , lugs,jointing taplon tapes etc at both ends complete all as specified and directed. Note : Excavation, earth work, cable sand cushioning & cable protection shall be measured separately under relevant items of this schedule.

Material & Labour for LT underground cable, heavy duty cable of size 10x2 core, 1100 Volts, XLPE insulated and PVC sheathed, armoured, multi-stranded aluminium conductor cable conforming to IS , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly protected in galvanised steel pipe of suitable sizes all bare conductor of cable including cable gland , lugs,jointing taplon tapes etc at both ends incl disconnecting all as specified and directed. Note : Excavation, earth work, cable sand cushioning & cable protection shall be measured separately under relevant items of this schedule.

Material & Labour for LT Cable,1.1 KV grade straight through jointing kit ,heat shrinkable type joint complete with jointing materials and accessories for 120 to 240 sqmmx3.5 core complete all as specified and directed

Material & Labour for LT Cable,1.1 KV grade straight through jointing kit ,heat shrinkable type joint complete with jointing materials and accessories for up to 95 sqmmx3.5/4 core complete all as specified and directed

Material & Labour for LT Cable,1.1 KV grade cable end jointing kit ,heat shrinkable type joint complete with jointing materials and accessories for 120 to 240 sqmmx3.5 core complete all as specified and directed

Material & Labourfor LT Cable,1.1 KV grade cable end jointing kit ,heat shrinkable type joint complete with jointing materials and accessories for up to 50 to 95 sqmmx3.5 core complete all as specified and directed

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for laying of electric cableand getting out in soft/loose soil, complete all as specified and directed

Returning, filling in excavated soil , including leveling,watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed

Removing excavated material(soil) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above & starting point complete all as specified and directed

Material & Labourfor sand cushioning in trenches for protection of UG cable with river based sand laid dry in trenches before and after laying of cable, incl well ramming complete all as specified and directed

Material & Labour for providing of new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified & directed.

Supply & Laying in replacement of GI Steel tubing light grade 100 mm dia including all fitting laying in trenches across road or grouting /fixing on wall for protection of cable complete all as specified and directed.

Supply & Laying in replacement of GI Steel tubing light grade 50 mm dia including all fitting laying in trenches across road or grouting /fixing on wall for protection of cable complete all as specified and directed .

Supply & Laying in replacement of GI Steel tubing light grade 25 mm dia including all fitting laying in trenches across road or grouting /fixing on wall for protection of cable complete all as specified and directed .

Material & Labour for PCC (1:3:6) type C2 using 40mm graded aggregate as in foundation for Post/Pole/ FPB /Transformer plinth plateform etc including fair finish even and fair to exposed surfaces without using extra cement complete all as specified and as directed.

Material & Labour for PCC (1:2:4) type B-1 (with using 20 mm graded stone aggregate) as coping of pole/FPB/TFR plinth plateform including necessary form work as required complete as directed

Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized wire 4 mm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 15 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 5 of SSR part 1 including testing on completion all as specified and directed. incl demolition to existing one complete. Note: (i) Earthing has to done by spl persons and if the desired earth resistance is not found within permissible limit shall be redone by contractor at no extra cost. (ii) Cost of GI wire 4 sqmm and 15 mm dia pipe medium grade upto 7.5 mtr is included in the rate quoted for this item

Material and labour for in replacement of u/s MCCB 400 Amps 35 KA ,4 pole 415 V AC 50 Hz ,adjustable thermal magnetic release 80 to 100% , Ics=100%of Icu complete all as specified and directed.

Material and labour for in replacement of u/s MCCB 315/320 Amps 35 KA ,4 pole 415 V AC 50 Hz, adjustable thermal magnetic release 80 to 100% Ics=100%of Icu complete all as specified and directed.

Material and labour for in replacement of u/s MCCB 250 Amps 35 KA, 4 pole 415 V AC 50 Hz ,adjustable thermal magnetic release 80 to 100%thermal-magnetic release Ics=100%of Icu complete all as specified and directed.

Material and labour for in replacement of u/s MCCB 200 Amps 25 KA, 4 pole 415 V AC 50 Hz ,adjustable thermal magnetic release 80 to 100%thermal-magnetic fixed type, Ics=100%of Icu complete all as specified and directed.

Material and labour for in replacement of u/s MCCB 100 amp 16 KA,4 pole 415 V AC 50 Hz thermal-magnetic fixed type , Ics=100%of Icu complete all as specified and directed.

Supply,Installation, Commission and testing of type tested LT panel outdoor type LT(415 volts,50hz,3 phase 4 wire supply) of size 90cmx60cmx50 cm factory assembeled,weather & vermin proof(protection class IP43) fabricated out of 3.15mm thick CRCA sheet with front hinges opening ,rubber lining,locking arrangement,powder coated extermally and internally including cable glands of suitabe size including taking down old unserviceable panel complete all as specified and directed and comprising the following as under :- (i)Aluminium busbar consisting of four no of capacity 300 amps duly insulated with heat shrinkable sleeve 1.1 KV grade mounted on heavy duty epoxy insulator . (ii)Provn for fixing of MCCB ,4P,63 to 200 Amp (iii) The panel shoud be fixed on and including angle iron stand made out of 50x6mm thick 60 cm height duly grouted 30 cm below ground level in PCC all as directed. (iv) Item rate includs excavation ,pcc &earth work reqd for taking out old existing cable incl lugs thimble &relaying the same.

Supply ,Installation, commissioning & testing of factory made ,any CPRI approved ,LT switched gear panel board,IP-54(outdoor type) ,415 voils,50 Hz,AC supply,three phase and neutral (4 wie) ,600 Amps aluminium busbars 4 pole ,duly insulted with heat shrinkable sleeve as per colour code supported on epoxy insulatators,having independent compartment for insulated busbar ,incoming feeder & each outgoing feeder ie cubical type ,made out of 3.15 mm thick CRCA sheet,rigid mild steel angle iron frame of 50mmx50mmx6mm with 900mm long extended legs grouting in PCC 1:3:6 type C2 block of size 300mmx200mmx300mm ,duly epoxy powder coated internally & externally with approved shade ,rubber gasket,hinged front & back openable doors with proper locking arrangements for dust and vermin proof ,complete including suitable size cable alley,lugs,cable glands,common earth bar of GI strip 32x6mm at bottom and making connections with MCCB spreaders/wiring with suitable size FRLS copper conductor cable ,locking arrangements 65mm size and lock with keys,earth work and excavation comprising/safely accomodate the following including taking down old unserviceable panel complete all as specified and directed and specified INCOMING :- (i) MCCB 415 volt ,400 amps ,4pole,adjustable thermal magnetic release 80 to 100% ,35 KA (Ics=100%Icu)-01 NO (ii) Spreader link =1set (iii) Rotery operated handle =01 set. (iv) Aluminium busbars suitable for 600 Amps,3Phase,4wire system=1 set (v) Digital Ampare meter with CT(for each phase) square type with selector switch = 01 No. (vi Digital Volt meter square type with selector switch = 01 No (vii) LED type indication lamps (R-Y-B)with holder panel mounting type-1 no OUTGOING :- MCCB 415 volt ,160 amps ,4pole,adjustable thermal magnetic release 80 to 100% ,25 KA(Ics=100%Icu) -07 Nos (ii) Spreader Link -7set

Supply ,Installation, commissioning & testing outdoor type Feeder Pillar box factory any CPRI approved , made out front & back openable double door type with locking arrangement (including provn of 65 mm Godrej (Navtal) lock with 2 keys), off size , fabricated out of 3.15mm structure and 2mm enclouser CRCA sheet duly as per IS 5039 duly painted with powder coated of approved shade over a coat of zinc chrome primer after min seven tank treatment process including numbering & lettering mounted on C channel of appropriate size complete with IP-54 protection having 433 volts, 3 phase, insulated bus bar for 400 Amps rating 4Nos, including all connections with aluminium strips, Pillar board shall be provided with danger notice plate with skull & bone sign, effectively PVC gasketed and sealed, glands to be provided at cable entries, including MS channel frame of ISMC 75 at the base of panel only for grouting purpose and grouted in PCC 1:2:4 type B-1 (Using 20mm graded stone aggregate) including taking down existing unserviceable feeder piller etc complete all as specified & directed complete as under :

Incoming :-(a) MCCB 415 Volt AC, 50 Hz, 250 Amp four pole breaking capcity 35 KA, adjustable thermal magnetic release 80 to 100%thermal-magnetic release Ics=100%of Icu complete all as specified and directed. - 01 No (ii) Spreader link =1set (iii) Rotery operated handle =01 set. (iv) Aluminium busbars suitable for 400 Amps,3Phase,4wire system=1 set (v) Digital Ampare meter with CT(for each phase) square type with selector switch = 01 No. (vi Digital Volt meter square type with selector switch = 01 No (vii) LED type indication lamps (R-Y-B)with holder panel mounting type-1 no Out going :-(a) MCCB 415 Volt AC, 50 Hz, 100 Amp FP breaking capcity 16 KA, thermal fixed type- 03 Nos (b) MCCB 415 Volt AC, 50 Hz, 63 Amp FP breaking capcity 16 KA, thermal fixed type - 03 Nos ( c)Spreader link =5set

Supply ,Installation, commissioning & testing outdoor type Feeder Pillar box factory any CPRI approved , made out, front & back openable double door type with locking arrangement (including provn of 65 mm Godrej (Navtal) lock with 2 keys), off size , fabricated out of 3.15mm structure and 2mm enclouser CRCA sheet duly as per IS 5039 duly painted with powder coated of approved shade over a coat of zinc chrome primer after min seven tank treatment process including numbering & lettering mounted on C channel of appropriate size complete with IP-54 protection having 433 volts, 3 phase, insulated bus bar for 400 Amps rating 4Nos, including all connections with aluminium strips, Pillar board shall be provided with danger notice plate with skull & bone sign, effectively PVC gasketed and sealed, glands to be provided at cable entries, including MS channel frame of ISMC 75 at the base of panel only for grouting purpose and grouted in PCC 1:2:4 type B-1 (Using 20mm graded stone aggregate) including taking down existing unserviceable feeder piller etc complete all as specified & directed complete as under :-

Incoming :-(i) MCCB 415 Volt AC, 50 Hz, 500 Amp four pole breaking capcity 50 KA, Adjustable thermal magnetic release 80 to 100%, Ics=100%of Icu complete all as specified and directed. - 01 No (ii) Spreader link =1set (iii) Rotery operated handle =01 set. (iv) Aluminium busbars suitable for 800Amps,3Phase,4wire system=1 set (v) Digital Ampare meter with CT(for each phase) square type with selector switch = 01 No. (vi Digital Volt meter square type with selector switch = 01 No (vii) LED type indication lamps (R-Y-B)with holder panel mounting type-1 no Out going :-(a) MCCB 415 Volt AC, 50 Hz, 315 Amp FP breaking capcity 35 KA, adjustable thermal magnetic release 80 to 100%, Ics=100%of Icu complete all as specified and directed. - 02 No (b) MCCB 415 Volt AC, 50 Hz, 200 Amp FP breaking capcity 35 KA, adjustable thermal magnetic release 80 to 100%, Ics=100%of Icu complete all as specified and directed. - 03 No (c) Spreader link =5set

Supply ,Installation, commissioning & testing outdoor type Feeder Pillar box factory any CPRI approved , made out, front & back openable double door type with locking arrangement (including provn of 65 mm Godrej (Navtal) lock with 2 keys), off size , fabricated out of 3.15mm structure and 2mm enclouser CRCA sheet duly as per IS 5039 duly painted with powder coated of approved shade over a coat of zinc chrome primer after min seven tank treatment process including numbering & lettering mounted on C channel of appropriate size complete with IP-54 protection having 433 volts, 3 phase, insulated bus bar for 400 Amps rating 4Nos, including all connections with aluminium strips, Pillar board shall be provided with danger notice plate with skull & bone sign, effectively PVC gasketed and sealed, glands to be provided at cable entries, including MS channel frame of ISMC 75 at the base of panel only for grouting purpose and grouted in PCC 1:2:4 type B-1 (Using 20mm graded stone aggregate) including taking down existing unserviceable feeder piller etc complete all as specified & directed complete as under :-

Incoming :-(a) MCCB 415 Volt AC, 50 Hz, 400 Amp four pole breaking capcity 35 KA, Adjustable type 70% - 100% - 01 No (ii) Spreader link =1set (iii) Rotery operated handle =01 set. (iv) Aluminium busbars suitable for 600 Amps,3Phase,4wire system=1 set (v) Digital Ampare meter with CT(for each phase) square type with selector switch = 01 No. (vi Digital Volt meter square type with selector switch = 01 No (vii) LED type indication lamps (R-Y-B)with holder panel mounting type-1 no Out going :-(a) MCCB 415 Volt AC, 50 Hz, 250 Amp FP breaking capcity 25 KA, adjustable thermal magnetic release 80 to 100%, Ics=100%of Icu complete all as specified and directed. - 01 No (b) MCCB 415 Volt AC, 50 Hz, 200 Amp FP breaking capcity 25 KA, adjustable thermal magnetic release 80 to 100% , Ics=100%of Icu complete all as specified and directed. - 01 No (c) MCCB 415 Volt AC, 50 Hz, 100 Amp FP breaking capcity 16 KA, thermal fixed type - 02 Nos (d)Spreader link = 4set Note : (i) Drawing for LT Panel of suitable specific size shall be submitted with accommodate all the controls & suitable size of Bus bar incl provn of measuring instuments /indication lamps before execution of wks. (ii) LT Panel should be CPRI Approved

NOTE:- Amount of credit of Rs. 72666.00 for retrieved materials is mentioned in Schedule of Credit Page No 29 of tender documents in pdf form which will be deducted offline while acceptance of tender.