Military Engineer Services Tender

Returning, filling in, including spreading, leveling, watering and well ramming in layer not exceeding 25cm thick each complete all as specified and directed.

M&L for cutting under the road /pavement /hard standing or in any other situation with the manual labour for crossing of U/G cable through it and making both the end good complete all as specified and directed .

S&F PVC aluminum cable two core of size 1.5 Sqm with casing caping or flexible pipe for connecting light to distribution board complete all as directed

S&F distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 2 way with 200 Amps with MCB 6 amps single pole ‘C’ curve fixed to piller/wall complete all as specified and directed.

S&F bracket fabricated from 32 mm bore galvanised iron tubing light grade, 0.3 metre long drilling hole in pipe for insertion cable and fixed on existing pillars fixing with mild steel flat iron clamps, nuts, bolts or grouting in pillar etc

S& F decorative gate/garden light made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 base cat part No LHFXBON1TN6F035 of make Havells or equivalent complet all as directed

M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade cable with multi strand copper conductor of size 1.5 Sq mm FRLS (Nominal area) drawn through and including PVC casing & capping or PVC conduit fixed on wall, ceiling with screws, with all fittings including Tee, Junction boxes and provision of PVC terminal box of suitable size with 3 mm thick laminated sheet /hylam Bakelite sheet cover for mounting switch sockets and regulators and drawing continuous earth wire of PVC insulated unsheathed 1100 Volts grade cable with stranded FRLS copper conductor of size 1.5 Sq mm (Nominal area) for light point complete all as specified.

S&F switch piano flush button type 6 amps single pole one way.

S&F ceiling rose surface bakelite 2 to 3 terminals 65 x 50mm complete all as specified and as directed.

M&L for cutting of any type of wall made of brick or stone for making hole for exhausting air by exhaust fan and making good with cement work and matching with existing all as directed

S&F Ventil Air DX off white fan PVC, Sqare type with louvers of sixe 250mm seep 230 volt AC SKU code FHVVEDXOWH10 of make Havells or equivalent

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate . Earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt upto 1.5 meter depth all around the earth plate and connected to earth lead of GI strip 32x6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel and thimbles and other end of the earth wire connected to Plant/equipment and protected by galvanized iron or steel pipe light grade and water pipe 20mm bore GI medium grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of 2009 and also including making test point for testing of earthing made out of gun metal or phosphorous bronze size 75x75x25 mm complete . Note: On testing after completion of earthing if desired earth resistance below 5 ohms is not achieved, the earthing will be redone at no extra cost.

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc with 25x3mm aluminum strip including riviting to each joints etc.

M&L Provision of Air termination point with 300 mm long 20 mm dia aluminum rod fixed on GI tubing 40 mm dia with nuts and bolts.

Supply and fix GI tubing light grade of 40 mm dia galvanised, with all fitting and fixed complete to walls/ roof with PCC cubical foundataion for vertical support all as specified and directed

S&F Test point terminal black made of gun metal or phosphorus bronze size 75 x 75 x 25 mm, drilled & screwed including 3 Nos 8 mm dia 25 mm long hex hand screw

S&F Test point terminal black made of gun metal or phosphorus bronze size 75 x 75 x 25 mm, drilled & screwed including hex hand screw complete all as directed

S&F PVC insulated unshethed copper wire 1100volt grade of cross section area 6 Sqmm single core for connection from distribution board to test point using fixing casing caping or conduit of suitable size complete all as directed

Supply and fix submersible pumpset for domestic use AC 415 volts , 50 HZ AC supply of capacity 5 HP three phase, water filled discharge head 429 LPM and head range 351mtrs vertical type stainless steel body class B insulation including electric connection, frame work and testing complete all as directed .

Supply, laying and testing submersible electric power cables (heavy duty) 1100 Volts grade with stranded copper conductor of size 4 sq mm 3 core all as directed

Supply install and testingdirect on line starter internally prewired, three phase, 4 wire, 415 volt, AC, 50 Hz, provided with protection degree IP 54 and class 'H' insulation of capacity 5 HP complete all as directed

Supply, fixing, laying & testing for galvanised iron (Gl) tubing of 20mm dia medium grade with all tube fittings (such as bends, elbows, tees, short pieces, connectors, plugs and unions, etc.) laid in trenchs complet all as directed

Supply, fixing, laying & testing for galvanised iron (Gl) tubing of 50mm dia medium grade with all tube fittings (such as bends, elbows, tees, short pieces, connectors, plugs and unions, etc) laid in trenchs complet all as directed

Supply and fixing bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to GI pipe line complete all as directed

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of size 20 mm complete all as directed.

S&F nozzels for fountain of bore 20mm

Materials & labour for fabrication and installation of Sign board with ACP sheet, Iron frame (327"X36"), Stainless Steel letters of size 12"X3" and Logo size 26", backlit LED light including electric connection with 2.5 sqmm copper conductor cable(FRLSH) etc.complete fixing and transpoartation at site all as specified and directed by Engg-in-Charge.

Note :-Tenderers may be noted that amount of credit will be deducted from the total amount arrived, at the time of Acceptance of contract.