Military Engineer Services Tender

Material & Labour for fixing LED flood light of cap 120 watt, 230 volt AC,outdoor type withthermal management in multiple optics and equipped with IP 6 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified. Make :-SYSKA CAT PART No SSK-BLS-CF-120WATT, Bajaj/Crompton or equivalent.

Material and labour Garden Light Pressur dia cast powder coated housing with PC diffuser,Efficient high output LED with IP 66 protection and indirect lighting with glare free milky white side covers complete with PCC Work ,cable etc. Cat No: LBLA3-10-CDL of make: Crompton Greaves or equivalent in Philips/ Bajaj/ Havells including taking out of old light fitting all as specified and as directed.

Supply & fixing in replacement, Brackets for street light fittings made out of 40 mm bore Light grade GI pipe, 1.2 Mtr length, bend to shape all as directed. (Note : Clamps, nuts and bolts will be measured and paid separately).

Supply & fixing in replacement, for two core PVC insulated cables 2.5 Sqmm size, 1100 Volt grade with copper conductor and drawing into street light brackets/PVC Conduits and connecting with Junction Box and Street light fittings complete all as directed.

Supply & fixing in replacement, weather proof street light junction box of size 20x20x15cm depth including bakelite fuse control of 32 Amps and connecting terminals 4way and fixing with street light Poles (Steel/PCC) complete all as directed. (Note : Clamps, nuts and bolts for fixing the box with pole will be measured and paid separately).

Taking out the old unserviceable LT underground cable ,upto 16 sqmm 4 core 1100 volts grade, XLPE insulated and PVC sheathed, armoured heavy duty with multistrand aluminium conductors from trenches/ wall /floor /road /culverts or pole of following sizes and segregate the unsv & serviceable :-(Note:- Excavation and earth work, duck work , GI pipe for laying of cable and sand cushing / cable protection covers etc are beyond the scope of this item and shall be measured & paid for separately under relevant items of sch).

Supply ,laying , jointing, testing and commissioning in replacement of LT underground cable , 1100 volts grade, XLPE insulated and PVC sheathed, armoured heavy duty with multistrand aluminium conductors IS-7098, laid in trenches /fixed on wall /floor /road /culverts /pole or encased in GI pipe all as directed for the following sizes:- (a) 10 sq mm 2 core

(b)16 Sqmm 2 core

(c) 16 Sqmm 4 core

Excavation in trenches in hard/dense soil not exceeding 1.5m wide and not exceeding 1.5 metre in depth for taking out/ laying of cable and not exceeding 10 Sqm on plan for poles, struts, stays etc. and not exceeding 1.5 m in depth and getting out complete all as specified.

Returning, filling in, trenches including spreading leveling, watering and well ramming in layers not exc 25 cm.

Removing excavated material to a distance not exc 50 mtrs and depositing where directed at a level n.exc 1.5 mtr above the starting point.

Taking out old unserviceable brick covers.

Laying only old serviceable bricks retrieved from item srl No.14 as cable covers in trenches complete

Brick covering to underground electric cable using sub class ‘B’ bricks, laid dry, flat, perpendicular to the direction of cable complete.

M&L for sand cushioning for protection of cable using dry river sand, free from particles all as specified and directed.

Material and labour Earthing complete with galvanised steel earth plate electrode 60×60cm×6mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead strip of size 32x6 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel,concrete PCC (1:3:6) type C1, Pre cast RCC (1:2:4) type B1 cover slab of size 70x70 x 10 cm including one handle for lifting made out of 10 mm dia TMT Bar all as shown in electrical plate No. 3 connected to earthing test point, protected by GI pipe 40 mm dia light grade, watering GI pipe 20 mm dia (Medium grade) with wire mesh, funnel, including alternate layer of charcoal or coke and salt all around the elecatrode, necessary excavationa and earth work all as specified or directed including testing on completion.

Material and labour LED Post Top Lantern 40 watt for 360O indirect lighting with glare free milky white side covers and IP65 grade protection Cat No: LPTO-40-CDL of make: Crompton Greaves or equivalent in Philips/ Bajaj/ Havells including taking out of old light fitting all as specified and as directed.

Material and labour for MCCB 4 pole, 415 V, adjustable type, 160 Amp with breaking capacity 36 KA Cat No: CM90642OONO including Spreader terminals Cat No: CM92007OOOO of make: L&T or equivalent in Legrand/ Schneider/ ABB including taking out of old one all as specified and as directed.

Material and labour for MCCB 4 pole, 415 V, 63 Amp, 25 KA Cat No: Cat No:CM91712OOHOOG of make: L&T or equivalent in Legrand/ Schnieder/ ABB including taking out of old one all as specified and as directed.