Military Engineer Services Tender

Supply only LED driver for street Light 60 W to 90W Power as per sample approved by Accepting Officer and directed by Engineer-In-Charge .

Supply only LED driver for street Light 90 W to 150 W Power as per sample approved by Accepting Officer and directed by Engineer-In-Charge .

Excavation in trenches, not exceeding 1.50mtr wide and not exceeding 1.50mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.50 mtr in depth and getting out, in hard dense soil, complete all as specified and as directed.

Excavation in trenches, not exceeding 1.50 m wide and exceeding 1.50 m in depth but not exceeding 3.0 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 3.0 mtr in depth and getting out, in hard dense soil, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm, any type of soil, complete all as specified and as directed.

Removing excavated soil not exceeding 50mtr and depositing where directed at a level not exceeding 1.50 mtr above the starting point, complete all as specified and as directed.

Sand cushioning to protection of underground cables, laid 8 Cm before laying and 15 Cm after laying of cable, and punned to form an overall layer of 18 Cm thick, complete all as specified and directed. Note: Punned thickness shall be measured.

Sub class ‘B’ bricks, modular size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning for mechanical protection of cable, with width equal to the length of the brick, complete all as specified and directed.

Taking out carefully unserviceable LT UG cable up to 50.0 Sqmm size from trenches and relaying the same after repairs in same or other indicated location included testing on completion, complete all as specified and as directed. Note: Earth work, sand work, brick work will be measured and paid separately

Disconnecting electrically and taking out old unserviceable LT UG cables of any type, of size 6.0 Sqmm 2.0 core, 10.0 sqmm 2.0 core and 16.0 Sqmm 2.0 core, complete all as specified and as directed.

XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 Volts grade, cross-sectional area 10.0 Sqmm, 2.0-core, laid in trenches or passing through pipes, including suitable lugs and accessories for making connections at both ends, complete all as specified and as directed.

Description all as per serial item No- 1.13 here in before but for cable of size 6.0 Sqmm, 2.0-core,complete all as specified and as directed.

Description all as per serial item No- 1.13 here in before but for cable of size 16.0 Sqmm, 2.0-core,complete all as specified and as directed.

Disconnecting electrically and taking out old unserviceable LT UG cables of any type, of size 10.0 Sqmm 4.0 core, 16.0 sqmm 4.0 core and 25.0 Sqmm 4.0 core, 35 sqmm 3.50 core, complete all as specified and as directed.

XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 Volts grade, cross-sectional area 25.0 Sqmm, 4.0-core, laid in trenches or passing through pipes, including suitable lugs and accessories for making connections at both ends, complete all as specified and as directed.

Description all as per serial item No- 1.17 here in before but for cable of size 10.0 Sqmm, 4.0-core,complete all as specified and as directed.

Description all as per serial item No- 1.17 here in before but for cable of size 16.0 Sqmm, 4.0-core,complete all as specified and as directed.

Description all as per serial item No- 1.17 here in before but for cable of size 35.0 Sqmm, 3.50-core,complete all as specified and as directed.

Replacement of old cable jointing kit of any type and any description with new cable jointing kit for 1100 volt grade cable for straight through termination heat shrinkable type joint complete with jointing material and accessories with full sleeves and thimbles suitable for XLPE/PVC armoured aluminium conductor cable of size 10 to 16 Sqmm 3.5/4 core. Make : Denson/ M seal/ 3 M.

Replacement of old cable jointing kit of any type and any description with new cable jointing kit for 1100 volt grade cable for straight through termination heat shrinkable type joint complete with jointing material and accessories with full sleeves and thimbles suitable for XLPE/PVC armoured aluminium conductor cable of size 25 to 50 Sqmm 3.5/4 core. Make : Denson/ M seal/ 3 M.

Replacement of old service wire of any type and any description with new service wire of size 6 Sqmm, 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connection complete all as specified and as directed.

Description all as per serial item No- 1.23 here in before but forservice cable of size 10.0 Sqmm, complete all as specified and as directed.

Description all as per serial item No- 1.23 here in before but forservice cable of size 4.0 Sqmm, complete all as specified and as directed.

Tubes, 'light grade' galvanised, 50mm bore, ISI marked including all fitting such as bends, socket, connectors, back nuts, etc, laid in trenches or under floors, Fixing in repair, complete all as specified and as directed.

Tubes, 'light grade' galvanised, 40mm bore, ISI marked including all fitting such as bends, socket, connectors, back nuts, etc, laid in trenches or under floors, Fixing in repair, complete all as specified and as directed.

Replacement of cable of any type any description with new PVC insulated and PVC round Sheathed, cross-sectional area, 2.50 Sqmm, 3.0 -core, multi-stranded, annealed bare copper conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to IS 694: 2010, complete all as specified and directed.

Description all as per serial item No- 1.28 here in before but for cross-sectional area 1.50 Sqmm, 3.0-core,.

Making two hole of 14 mm dia on the existing LT Steel pole at a height of 1.50 mtr from GL and at the top of the pole near to bracket for inserting , 4 sqmm 2 core cable from junction box to street lights complete all as specified and directed

LED street light fitting 35 Watt 230 Volt, AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, connecting up with three core flexible copper conductor cable of suitable size, and including house service bracket for mounting light fittings House service bracket any type complete with 1.50mtr long galvanised iron pipe 40mm dia medium grade, bent to required shape including mild steel clamps of flat iron 40x6mm, hook, stay, nut, bolt and washer including painting with two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed. Make: Phillips cat part No- BRP030 P LED35 CW SLR GR PSU SPD or equivalent in Havells/ Bajaj/ Crompton.

Description all as per item No-1.31 above but for LED street light 45 Watt Make: Phillips cat part No- BRP031 P LED45 CW SLR GR PSU SPD or equivalent in Havells/ Bajaj/ Crompton.

Description all as per item No-1.31 above but for LED street light 60 Watt Make: Phillips cat part No- BRP032 P LED60 CW SLR GR PSU SPD or equivalent in Havells/ Bajaj/ Crompton.

Description all as per item No-1.31 above but for LED street light 70 Watt Make: Phillips cat part No- BRP032 P LED70 CW SLR GR PSU SPD or equivalent in Havells/ Bajaj/ Crompton.

Description all as per item No-1.31 above but for LED street light 100 Watt Make: Phillips cat part No- BRP033 P LED100 CW SLR GR PSU SPD or equivalent in Havells/ Bajaj/ Crompton.

Description all as per item No-1.31 above but for LED Flood light 30 Watt Make: Phillips cat part No- BVP102 LED30 CW FG GR PSU or equivalent in Havells/ Bajaj/ Crompton.

Description all as per item No-1.31 above but for LED Flood light 50 Watt Make: Phillips cat part No-BVP103 LED50 CW FG GR PSU or equivalent in Havells/ Bajaj/ Crompton.

Description all as per item No-1.31 above but for LED Flood light 100 Watt Make: Phillips cat No-BVP175B LED110S or equivalent in Havells/ Bajaj/ Crompton.

Description all as per item No-1.31 above but for LED Flood light 120 Watt Make: Phillips cat No-BVP192LED165 CW NB FG A1 PSU GR or equivalent in Havells/ Bajaj/ Crompton.

Replacement of old LED post top lantern with new LED post top lantern 35/40 Watt warm white made aluminium die cast housing with decorative clear opal acrylic diffuser and IP-65 protection fixing with proper arrangements and making electrical connection complete all as specified and directed. Make-Phillips/Havells/Surya/Bajaj

LED bollard light 8/9 watt suitable for landscape lighting with high power LED as light source including making PCC foundation fixing with required fastners, making electrical connection, including taking out existing unserviceable light fitings, any type, complete all as specified and directed. Make Phillips/Havells/ Crompton/ Wipro/Surya

Replacement of old solar panel of any type and any description with new solar panel of 100 Wp on steel pole at a height not more than 8 mtr for solar street light 24 W, complete all as specified and directed. Make: Havells/Bajaj/Phillips/Wipro

Replacement of old solar charge controller of any type and any description with new solar charge controller on steel pole of height not more than 8 mtr for solar street light 24 W, complete all as specified and directed complete all as specified and directed. Make: Havells/Bajaj/Phillips/Wipro

Replacement of old GEL battery of any type and any description with new GEL battery 60 Ah on steel pole at a height not more than 8 mtr for solar street light 24 W, complete all as specified and directed Make: Havells/Bajaj/Phillips/Wipro

Replacement of old street light bracket of any type and any description with new street light bracket made out of GI tubing, light grade, 25/32/40mm bore, 1000mm long, bent to shape at 120 degree, fixed on pole by providing two sets of MS clamp made up of flat iron 40 x 6mm including bolts, nuts and washer of suitable size including painting the bracket & clamp with two coats of aluminium paint over a coat of primer complete all as specified and directed.

Dismantling cross-arms of Mild Steel channel or angle sections etc. complete and setting aside and depositing in MES store for re-use in same of new work, complete all as specified and as directed.

Replacement of old cross arms, bracings, supports, clamps and back plates of any type and any description with new cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections conforming to Fe-290 (Gde E-165) grade including necessary nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape and size as directed and including applying two coats of aluminium paint (under & finishing coats) over a coat of red oxide zinc chrome primer on exposed steel surfaces after preparation of surfaces, supplied and fixed in repair complete all as specified and as directed. Note : (i) Sizes & types of members and shape of the cross arms etc shall be as required at site, all as specified and directed by the Engineer-in-Charge. (ii) Un-exposed steel surfaces shall be given one coat of red-oxide zinc chrome primer only.Cost of the same is included in quoted unit rate of the item and nothing extra shall be paid on this account.)

Disconnecting, dismantling and taking out old steel tubular pole any size/ length and making good all disturbed surface to match with existing specifications complete all as directed as directed.

Steel tubular, swaged, pole of overall length 9 meter having maximum tensile strength 42 Kgf/mm2 of type 410 SP-31 conforming to IS-2713-1980, single swan neck made out of 50 mm dia MS pipe 1.5 mtr long to be jointed on top of LT pole incl fabrication work for fixing street light through a hole of 14 mm dia shall be provided at height of 2.5 mtr from base plate for inserting 2 core cable from junction box to top of the pole and top portion shall be fabricated for fixing street light fittings including earth work complete with cast iron base plate, having suitable dia of hole through the pole with nuts & bolts for earthing arrangement, bottom portion of tubular steel pole having 165.10 mm outer dia in 5 meter length, 4.5 mm wall thickness, middle portion having 139.70 mm outer dia in 2 metre length 4.5 mm wall thickness and top portion having 114.30 mm outer dia in 2 meter length, 3.65 mm wall thickness of pole wall, respectively, bottom MS square plate duly painted with two coat of black bituminous paint throughout, internally and externally up to planting depth and painting remaining portion of pole with two coats of aluminium paint to the entire exposed surfaces over one coat of red oxide primer making / pasting three nos circular strips each of 100 mm wide with one yellow and 02 Nos black colour strip synthetic enamel paint and marking / stencil writing of pole numbers with black paint including necessary excavation & earth work, removing excavated soil from site complete all as specified & directed. Note: Excavation, earth work and concrete in foundation shall be measured and paid separately under respective items of BOQ.

Testing and comissioning of Automatic street light switch of capacity 8 KW in single phase using nature switch for automatic switching of street lights based on LUX level of natural light. The sensor (nature switch) along with suitable power contactor, MCB and support terminals enclosed in pole / wall mounted enclosure made of rust proof, electric shock proof, termite proof and FR grade SMC junction box (Make: Sintex) conforming to IP54, including mounting arrangement with suitable size of FI clamps 02 Nos with complete acessories as under including taking down old street light switch complete all as specified and directed. (i) Contactor rating (AC3) single phase, 50-63 Amp : [Make : BCH/L&T/Schneider] (ii) MCB 63Amps (SP),10 KA, 240 volts: [Make : Schinder/ Legrand/ L&T] (iii) NATURESWITCH-01 [Make: HEALER (Model No. SWADEEP - 02EC8KW1P) or equivalent to Schenider/Hensal]

Factory made junction box, made with thermo polycarbonate, weather, water and vermin proof, dust proof, for outdoor use, having internal dimensions 317mmx265mmx160mm, suitable for road/ street lighting for 3-phase/ 4-core high wattage LED based lighting system for industrial applications, suitable for pole mounting, including 01 No. MCB single pole, 6 Amps and 04 Nos. aluminium bus bars of 200 Amps rating duly drilled holes for connections, cable glands, clamps etc for making necessary connections along with locking arrangement, including mild steel iron flat size 25x4mm having holes, nuts, bolts, washers, for fixing/ mounting on poles, painted with two coats of synthetic enamel paint over one coat of primer on internal and external surfaces, fixing in repairs, complete all as specified and directed.

Disconnecting electrically, dismantling and taking out existing street light junction box any size/type from PCC/steel pole and refixing on same pole with flat iron clamps of size 25 x 3mm, nuts, bolts, washers etc after repair including two coats of synthetic enamel paint over a coat of redoxide zinc chrome primer on iron/steel parts and making electrical connection complete all as specified and as directed.

Preparation of surfaces of old painted steel tubular swaged poles LT poles of any size, any section, cleaning the surface with mild steel wire brush and painting pole with one coat of black and white synthetic enamel paint in alternate strips, 30 cm thick each, up to 1.50 mtrs height from the top of coping including marking pole Nos with synthetic enamel paint, in uniform size black colour paint on circle with yellow paint, including painting rest height with two coats of aluminium colour painting with cross arms, bracing, clamps, nuts, bolts etc complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and paving trench for laying XLPE cable etc , including cleaning, removal and disposal of rubbish/ waste materials from premises, complete all as specified and as directed.

Plain cement concrete M-10(1:3:6), type C-2 (using 40mm graded crushed stone aggregate), as mass concrete in foundation, or in foundation of poles and stays, complete all as specified and as directed.

Disconnecting,dismantling and taking down old serviceable/unserviceable street/flood lights fitting any type from pole/wall complete all as specified and as directed.

Dismantling and taking down old connecting pipe/street light bracket of any type with all accessories from pole/wall complete all as specified and as directed.

Refixing of street/flood light fittings any type received from srl item No 1.56 on pole/wall in same or other location and connecting electrically with the wire 1.5 Sqmm twin core cable complete all as specified and as directed.

Refixing of pipe/street light bracket with nut, bolts, washers and clamps any type received from srl item No 1.57 on pole/wall in same or other location complete all as specified and as directed.

Earthing complete with galvanised iron earth plate electrode 600x600x6mm buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of earth plate not less than 1.5mtr below normal ground level, connected with galvanised iron strip, size 32x6mm as earth lead, by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 40mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15, type B-1 in pit with precast RCC M-15(1:2:4), type B-1 (using 20mm graded crushed stone aggregates) in cover reinforced with XPM not less than 4.0 Kg per Sqm, test point etc. all as shown in electric plate No-3 of SSR Part-I (2009), complete with necessary earth work in any type of soil, removal to a distance not exceeding 50mtr, including testing on completion, complete all as specified and as directed by Engineer-In-Charge. Note: Earth pit chamber and RCC pit cover shall be painted with two coats of red synthetic enamel paint over one coat of primer including preparing of surfaces.

Aerial bunched cable, 1100 Volts, nominal cross sectional area 25.0 Sqmm, consisting of four single core (Three Phase and one Neutral), sizes 4x25Sqmm+16Sqmm, each core screened by an extruded, semi-conducting cable, XLPE insulated and screened again by semi-conducting layer and aluminium tape and XLPE insulation, phase identification tape, twisted around one insulated messenger of 16.0 Sqmm as mention here-in-before, messenger will made out of aluminium and mild steel alloy and over all PVC or polythene sheathed, stretching the cable on existing poles with mild steel anchor clamps, suspension, clamps, hooks, nuts, bolts and washers including cable ends/ straight through joints (in-line connectors), tee junctions as required at site, complete all as specified and as directed. Make: Havells/ Poycab/ Finolex/ Paragon/ Grandley.

MCB, single pole, 6 to 32 Amps, 240 Volts, 50 Hz, 'C' curve including necessary incoming and out going electric connection with suitable size of copper lugs, fixing in repairs, complete all as specified and as directed.

Amount of Schedule of credit of RS 41,683.00 mentioned in Tender documents shall be deducted from quoted amount.