Military Engineer Services Tender

M&L for applying bituminous premixed semi dense asphaltic concrete 30 mm thick (consolidated thickness) with 5.50% binder of paving Bitumen VG-30 grade, content by weight of total mix including cement filler, on surfaces, rolled compacted with using 8 to 10 tonne capacity power roller to achieve the required compactness, camber and gradient mixed in hot mix plant using design mix and laid by mechnaical paver finisher complete all as specified and directed. NOTE:-(i) The actual binder content used shall be as per optimised content based on approved job mix formula irrespective of what ever indicated in Sch 'A'. (ii) Price adjustment shall be done on MINUS side only @ Rs. 45,000/- per MT (without considering the permissible tolerance on minus side) with reference to binder content indicated in Sch 'A'. (iii) No Price adjustment for Bitumen shall be done for variation on plus side. (iv) Please note that SDAC to be laid immediately after laying of BM. In case the SDAC could not be laid within 48 hours of laying of BM, primer coat @ 3Kg / 10Sqm to applied over freshly prepared bituminous surface and nothing extra shall be paid by the Govt. on this account. No claim what so ever shall be entertained by Govt on this account.

M&L for preparation of existing bituminous surfaces, removing, dust, dirt grease and other foregion matters etc to receive the markign and M&L for thermo plastic (Reflective) line, dashes, arrows, letters etc of following size wide marking, having 2.5 mm thickness (average) of uniform surface finish conforming to BS 3262 (Part 1) 1989 read in conjunction with the MOST specification 803 clause 4.2.2 on bituminous surfaces in white/yelow clour and super imposed with glass beads confirming to BS 6088 read in conjuction with and MOST specification 803 clause 4.3.3 complete all as specified and directed:- Note: - MOST specification 803 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by the GE. Shape & size/ patterns of marking shall be as approved by the GE.

Width exc 10cm wide.

S&F in repair Supply and fixing cat eye solar reflective type of metal body alloy of size 100x100x20mm with PAMA striplens reflector fixed with and incl MS stud of suitable size as per manufacturer instruction complete all as spd and directed by Engr in Charge.

supply and fix solar cat eye aluminium alloy shall ( 100% water proofing design according to 65) of size 125mm x125 mm (shank 65 mm) of high efficiency mono rystafie solar panel 2.4/0.3 watt one NI-ed rechargable battery (1.2V/1600 MA) consisting of super bright LED with 10000 to 18000 mcd complete as per manufacturer instruction complete all as spd and directed

M&L for factory made kerb stone (300mm x 450mm x 150mm) of M-25 grade cement concrete in position to the required line, level and curvature, jounted with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of jounts except at sharp curve shall not to more than 5 mm), including making drainage opening and paintingof kerb stones complete all as specified and directed.

M&L for preparation of new surface of brick or concrete or plastered surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

Excavating in post holes (or similar holes) in any type soil, each n.exc 0.5 cum, getting out and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed.

Supply and fixing of convex mirror of 600 mm dia and made up of polycarbonate material provided with 75 mm dia MS pipe post of 2700 mm height duly powered coated with adjustable fixing bracket for MS pipe used for road turning intersection curves T junction Hospital Parking Lots etc and also ideal for surveillance with clear & defined mirror image having 130 degree of viewing angle with unbreakble & strong mirror complete all as spd and directed by Engr-in- Charge

Demolition of concrete (un-reinforced)of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for hard core of broken boulders/stone of gauge n exc. 63 mm, deposited, spreading, leveling watering and well ramming to true surface in layers not exceeding 15 cm thick each layer complete all as specified and directed.

M&L for PCC (1:4:8) Type D2 (40 mm graded aggre-gate) as in foundations, filling and mass-concrete or sub base of floor/ hard standing/ footpath complete all as specified and directed.

M&L for 80mm thick coloured rubber moulded glossy finish machine pressed precast concrete interlocking paver block, M-40 Grade with grey cement & pigment any shape and size confirming to IS 15658-2006 complete all as specified and directed.Note - design /Shade of rubber moulded machine presses precast conc paver block shall be as approved by GE/Engr-in -Charge

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for PCC (1:2:4) type B-1, using 20mm graded stone aggregates, as in kerb/ benching/ coping, bed plates, for fixing of hold fast, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.