Bridge Ropeway Tunnel And Other Infrastructure Development Corporation Of Uttarakhand Limited Tender

Three seater bench (1775mm W x 560mm D x 840mm H; 450mm seating height.) Providing and placing 3 seater bench - I. Overall size shall be minimum 1775mm W x 560mm D x 840mm H; 450mm seating height. II. The seat and back shall be made up of injection moulded high impact strength polypropylene polymer with indoor grade UV resistance. The minimum dimensions of Back shall be 500mm W x 400mm H and seat shall be 525mm W x 530mm D. III. The powder coated welded MS beam structure shall be made from 1.6mm thick 50mm x 50mm. A 3mm thick HR steel plate shall be welded to beam for fixing seat and back frame. The powder coated welded leg MS structure shall be made up of 1.6mm thick 50mm x 50mm and 1.25mm thick 50mm x 25mm. IV. The shoes shall be made up of injection moulded high impact strength polypropylene polymer with indoor grade UV resistance and press fitted with tubular frame. V. All metal parts shall be powder coated minimum 50 microns. VI. The color shall be decided at the time of finalisation of contract and shall be approved by the Employer. The model shall be approved by the employer before procurement.

table for common room (1800mm W x 900mm D x 740mm H.) Providing and placing table - I. Overall size shall be minimum 1800mm W x 900mm D x 740mm H. The top shall be minimum 25mm thick PLB/MDF with 2mm thick PVC Edge beading. II. Understructure shall be having C-Frames of minimum 1.6mm thick MS to support the top. III. The Legs shall be of 1.6 mm thick MS ERW tube with minimum dia 38mm. IV. All metal parts should have epoxy polyester powder coating of the thickness 50 microns (+/-10). V. The color shall be decided at the time of finalisation of contract and shall be approved by the Employer. The model shall be approved by the employer before procurement.

table for common room (900mm W x 900mm Depth x 740mm Height.) Providing and placing table - I. Overall size shall be minimum 1800mm W x 900mm D x 740mm H. The top shall be minimum 25mm thick PLB/MDF with 2mm thick PVC Edge beading. II. Understructure shall be having C-Frames of minimum 1.6mm thick MS to support the top. III. The Legs shall be of 1.6 mm thick MS ERW tube with minimum dia 38mm. IV. All metal parts should have epoxy polyester powder coating of the thickness 50 microns (+/-10). V. The color shall be decided at the time of finalisation of contract and shall be approved by the Employer. The model shall be approved by the employer before procurement.

Chair canteen (510mm W x 400mm H and of seat shall be 520mm W x 530mm D.) Providing and placing premium quality reading chairs for rooms, library and dining chairs - I. Chair dimensions of back shall be 510mm W x 400mm H and of seat shall be 520mm W x 530mm D. II. It shall be made of injection moulded high impact strenght polypropylene polymer compound with indoor grade UV resistence. III. Tubular welded frame shall be made of 1.2mm thick tube of minimum dia 22mm and 1.2mm thick 35mm x 15mm rectangular tube of SS 202 grade. IV. Shoes shall be made of high impact strength polypropylene polymer compound with indoor grade UV resistance and pressed fitted with tubular frame. V. Finish shall be buffed polish to give shiny look. VI. The color shall be decided at the time of finalisation of contract and shall be approved by the Employer. The model shall be approved by the employer before procurement.

Cafeteria/Dining Table 6 setar Providing and placing premium quality 6 seater dining table- I. Overall size of the table shall be minimum 1700mm W x 1100mm D x 725mm H. II. Top and base shall be made up of 25mm thick MDF(Medium Density Fibre) board with PU painting of minimum of 2H hardness on top. III. The understructure shall be having bend pipe structure of 2mm thick powder coated MS tube of minimum dia 38mm and shall be fitted with top by SS machine screws. IV. Legs shall be made of 2mm thick powder coated MS tube of minimum dia 38mm and shall be fixed with understructure and table top. V. Plastic glide screws shall be fixed at the understructure to prevent the damage of table top during stacking. VI. The color shall be decided at the time of finalization of contract and shall be approved by the Employer. The model shall be approved by the employer before procurement.

Centre Table (1200mm W x 600mm D x 450mm H) Providing and placing premium quality center table - I. Overall size shall be minimum 1200mm W x 600mm D x 450mm H II. Top shall be made of 24mm thick high density plywood for load bearing capacity of upto 50 kgs. III. Urderstructure shall be made of curved rubber wood for ethnic design. IV. The color shall be decided at the time of finalisation of contract and shall be approved by the Employer. The model shall be approved by the employer before procurement.

Table officer (1800mm W x 800mm D x 750mm H, size of side unit shall be minimum 900mm W x 600mm D x 750mm H and size of back unit shall be minimum 1188mm W x 441mm D x 750mm H) Providing and placing premium quality table- I. Overall size of the table shall be minimum 1800mm W x 800mm D x 750mm H, size of side unit shall be minimum 900mm W x 600mm D x 750mm H and size of back unit shall be minimum 1188mm W x 441mm D x 750mm H. II. The Top shall be made of 36 mm laminated which shall comprise of 18 mm PLT + 18 mm PLB Baton, with 2 mm lipping all around as per IS:12823. III. Understructure shall be made of 1.6mm thick rectangular MS Frame of minimum size 40 x 20mm as per IS:7138 with CRMS 3mm thick Plates for bolting the leg. Legs shall be made of 1.6mm thick MS ERW round tube of minimum dia. 50mm. IV. Modesty & Side Panel shall be of Perforated MS sheet of 0.9 mm thick as per IS:513 and joining plates shall be CRMS 3mm thick plates to join main desk with side unit. The metal components are powder coated by epoxy polyester to the thickness of minimum 50 microns. V. Pedestal shell shall be 0.8 mm thick plus pedestal drawer tray shall be 0.5 mm thick and drawer front shall be 0.6 mm thick as per IS:513 The pedestal slides shall be double extension ball slides. VI. The back unit shall be made of minimum 0.8mm thick MS Sheet and Glass shall be 0.6mm thick sliding on channal. VII. Finish shall be epoxy polyester powder coated minimum 50 micron. VIII. The color shall be decided at the time of finalization of contract and shall be approved by the Employer. The model shall be approved by the employer before procurement.

High back Chair (750 mm, Depth of Chair - 750 mm as measured from pedestal below. Height of back from ground – min. 1170 to max. 1265 mm. Seat height – min. 445 mm to max. 540 mm. Providing and placing premium quality high back chair- I. Overall size of Chair shall be Width of Chair – 750 mm, Depth of Chair - 750 mm as measured from pedestal below. Height of back from ground – min. 1170 to max. 1265 mm. Seat height – min. 445 mm to max. 540 mm. II. The seat shall be made up of 1.2 ± 0.1 cm thick hot pressed plywood & upholstered with pure leather(black) and moulded polyurethane foam. III. High Resilience (HR) foam shall be used in making seat & back which shall be moulded with density 32 ± 2 kg/m ³ for seat and for back density shall be 24 ± 2kg/m ³. IV. Spine bracket shall be made of M.S plate connecting back with mechanism. V. Armrest top shall be soft touch upholstered with pure leather mounted on to an injection moulded height adjustable type armrest. VI. The mechanism of the chair shall have following features: 360⁰ revolving type, synchronous mechanism, Tilt tension adjustment, 5-position locking with Anti-Shock feature. VII. The chair shall be provided with pneumatic height adjustment which shall have stroke of 9.5 ± 5 mm. VIII. The pedestal shall be made of die-casted aluminium with buffing finish. It shall be fitted with 5 nos. twin wheel castor. The size of the pedestal shall be 650 ± 5 mm pitch-centre-dia (750 ± 10 mm with castors). IX. The twin wheel castors shall be made of Nylon injection moulded in black color. X. The color shall be decided at the time of finalization of contract and shall be approved by the Employer. The model shall be approved by the employer before procurement.

Chair (Width of Chair – 595 mm, Depth of Chair - 565 mm as measured from base below, Height 980 mm and Seat height -455 mm.) Providing and placing premium quality visitors chair- I. Overall size of Chair shall be, Width of Chair – 595 mm, Depth of Chair - 565 mm as measured from base below, Height 980 mm and Seat height -455 mm. II. The seat shall be made up of 12 ± 1 mm thick hot pressed plywood & upholstered with pure leather (black) and moulded polyurethane foam. III. High Resilience (HR) foam should be used in making seat & back which shall be moulded with density 32 +/- 2 kg/m ³ for seat and for back is of density 24 ± 2kg/m ³. IV. Armrest top is soft touch upholstered with pure leather mounted on to an injection moulded height adjustable type armrest Leg frame welded assembly shall be made from 38mm ± 0.3 mm x 19 ± 0.2 mm x 1.2 ± 0.016 mm ellipitical MS ERW tube with base for seat fixing. V. The color shall be decided at the time of finalization of contract and shall be approved by the Employer. The model shall be approved by the employer before procurement.

High back chair ( Height - min1025 to max 1150mm, Width-760mm and Depth-760mm, Seat Height - min 440 to max 540mm.) Providing and placing premium quality high back chair- I. Overall Dimensions of Chair shall be Height - min1025 to max 1150mm, Width-760mm and Depth-760mm, Seat Height - min 440 to max 540mm. II. The seat/back shall be made up of 12mm thick hot pressed plywood and upholstered with fabric and moulded Polyurethane foam together with moulded seat and back covers. III. The back foam shall be designed with contoured lumbar support for extra comfort. The dimensions of back shall be-500 mm (W) x 720 mm (H) and of seat shall be-500 mm (W) x 460 mm. (D). IV. The HR Polyurethane foam shall be moulded with density 45kg/m3-and Hardness load 16 kgf as per IS:7888 for 25% compression. V. The seat cover shall be injection moulded in black co-polymer polypropylene and back cover is vacuum formed from ABS sheets. VI. The one-piece armrests shall be made of black integral skin polyurethane with 50-70 Shore 'A' hardness and reinforced with M.S. insert. The armrests shall be scratch and weather resistant.

VII. The armrests shall be fitted to the seat with seat/armrest connecting strip assembly made of minimum 5mm thick HR steel. The center tilt mechanism shall be designed as 360° revolving type, 17° maximum tilt on pivot at center, Upright position locking, tilt tension adjustment.VIII. The pneumatic height adjustment shall have an adjustment stroke of 120mm . The bellow shall be 3 piece telescopic type and injection moulded in black Polypropylene. IX. The pedestal shall be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal shall be 660mm.(760 mm with castors).The twin wheel castors shall be injection moulded in Black Nylon. X. Finish shall be epoxy polyester powder coated minimum 50 micron. XI. The chair shall have passed all tests pertaining to BIFMA standards. XII. The color shall be decided at the time of finalization of contract and shall be approved by the Employer. The model shall be approved by the employer before procurement.

Visitor chair (Height 815mm, Width 590 mm and Depth 630 mm, Seat Height 450mm.) Providing and placing premium quality visitors chair- I. Overall Dimensions of Chair shall be Height 815mm, Width 590 mm and Depth 630 mm, Seat Height 450mm. II. The seat/back shall be made up of 12mm thick hot pressed plywood and upholstered with fabric and moulded Polyurethane foam together with moulded seat and back covers. III. The back foam shall be designed with contoured lumbar support for extra comfort. The dimensions of back shall be-(W) 500 mm x (H) 490 mm and of seat shall be-500 mm (W) x 460 mm. (D). IV. The HR Polyurethane foam shall be moulded with density 45kg/m3-and hardness load 16 kgf as per IS:7888 for 25% compression. V. The seat cover shall be injection moulded in black co-polymer polypropylene and back cover is vacuum formed from ABS sheets. VI. The one-piece armrests shall be made of black integral skin polyurethane with 50-70 Shore 'A' hardness and reinforced with M.S. insert. The armrests shall be scratch and weather resistant. VII. The armrests shall be fitted to the seat with seat/armrest connecting strip assembly made of 5mm thick HR steel. The tubular frame shall be cantilever type & made of 2mm thick MS ERW tube of minimum dia 25mm. VIII. Finish shall be epoxy polyester powder coated minimum 50 micron. IX. The chair shall have passed all tests pertaining to BIFMA standards. X. The color shall be decided at the time of finalization of contract and shall be approved by the Employer. The model shall be approved by the employer before procurement.

Chair mid back (Height - min 425 to max 545mm, Height – min 855 to max. 975mm, Width & Depth of Chair as measured from pedestal - Width-763mm and Depth-763mm.) Providing and placing premium quality mid back chair- I. Overall size of Chair shall be Seat Height - min 425 to max 545mm, Height – min 855 to max. 975mm, Width & Depth of Chair as measured from pedestal - Width-763mm and Depth-763mm. II. The seat and back shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded Polyurethane foam. III. The back foam shall be designed with contoured lumbar support for extra comfort. The seat shall be extra thick foam on front edge to give comfort to popliteal area. The dimensions of back shall be 475mm (W) x 580mm (H) and of seat shall be 470mm (W) x 480 cm (D). IV. The HR polyurethane foam shall be moulded with density= 45±2 kg/m3 and hardness load 16 ± 2 kgf as per, IS:7888 for 25% compression. V. The one-piece armrests shall be injection moulded from black Co-polymer Polypropylene. The mechanism shall be designed with 360° revolving type, Upright-position locking, Tilt tension adjustment, Seat/back tilting ratio of 1:3. VI. The pneumatic height adjustment shall have an adjustment stroke of 12.0 ±0.3cm. The bellow shall be 3 piece telescopic type and injection moulded in black Polypropylene.

VII. The pedestal shall be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal shall be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). VIII. The twin wheel castors shall be injection moulded in Black Nylon. IX. Finish shall be epoxy polyester powder coated minimum 50 micron.X. The chair shall have passed all tests pertaining to BIFMA standards. XI. The color shall be decided at the time of finalization of contract and shall be approved by the Employer. The model shall be approved by the employer before procurement.

visitor chair (Height - min 425 to max 545mm, Height – min 855 to max. 975mm, Width & Depth of Chair as measured from pedestal - Width-763mm and Depth-763mm.) Providing & placing of premium quality cabin visitor chair of reputed furniture manufacturer with ISO 9001, ISO 14001, ISO 18001, BIFMA, Green Guard / IGBC certifications. Overall dimensions of Chair of shall be (W)-61.4cm, (D)-64.5cm as measured from armrests / understructure. Height from ground - 89.5 cm. Seat height 46.5 cm. Dimensions tolerance / variations of within +/- 1 cm. The seat and back shall be made up of 1.2±0.1cm thick hot pressed plywood and upholstered with fabric upholstery cover and in house moulded polyurethane foam. The high resilience polyurethane foam shall be moulded with density 45±2kg/m³ and hardness load 16±2 kgf as per IS:7888 for 25% compression. The back foam shall be designed with contoured lumbar support for extra comfort. The seat shall have extra thick foam on front edge to give comfort to popliteal area. Back size shall be (W)-47.5cm, (H)-58.0cm & seat size shall be (W)-47.0 cm, (D)-48.0 cm. It shall have one-piece armrest made up of injection moulded from black co-polymer polypropylene. The understructure shall be cantilever type made of powder coated (DFT 40-60 microns) tubular frame of dia 2.54+/-0.03 cm x 0.2+/-0.016 cm thick MS ERW tube. The chair shall have passed stringent BIFMA testing norms. It shall also have certifications for low VOC emissions.

Cafeteria/Dining TABLE 4 seater with PU coated (1100mm W x 1150mm D x 725mm H and the chair shall be minimum 525mm W x 550mm D x 840mm H; seat height of 450mm.) Providing and placing premium quality 4 dining table I. Overall size of the table shall be minimum 1100mm W x 1150mm D x 725mm H and the chair shall be minimum 525mm W x 550mm D x 840mm H; seat height of 450mm. II. Top and base shall be made up of 25mm thick MDF(Medium Density Fibre) board with PU painting of minimum of 2H hardness on top. III. The understructure shall be having bend pipe structure of 2mm thick powder coated MS tube of minimum dia 38mm and shall be fitted with top by SS machine screws. IV. Legs shall be made of 2mm thick powder coated MS tube of minimum dia 38mm and shall be fixed with understructure and table top. V. Plastic glide screws shall be fixed at the understructure to prevent the damage of table top during stacking. VI. The color shall be decided at the time of finalization of contract and shall be approved by the Employer. The model shall be approved by the employer before procurement.

26 seater conference table Providing and placing premium quality modular conference table- I. Overall size shall be minimum 8200 mm X 2100mm comprising of one seater/ two seater/quarter circle modules. II. The top shall be 31.6 mm thick (18 mm + 12 mm + 0.6 mm DL (both sides) + 0.4 mm Membrane) Edge Profile shall be waterfall edge 10 mm radius on top edge and 5 mm at bottom. III. In Understructure the Legs shall be made from 25 mm PPB as per IS:3087 having a straight profile with half round edges and clad with 0.6 mm thick post Forming laminate. Overall thickness of leg shall be 26.2 mm. IV. The modesty panel in understructure shall be made from PLT (Pre laminated twin) boards of 18 mm thick as per IS:12823 V. There shall be wire carrier which shall be made from 0.6 mm thick CRCA painted. cover carrier shall be 12mm thick MDF as per IS:12406 VI. The color shall be decided at the time of finalization of contract and shall be approved by the Employer. The model shall be approved by the employer before procurement.

vip room Sofa three seater (450 mm, Height – 820 mm, Width & Depth shall be - Width-2055 mm and Depth-905 mm.) Providing and placing premium quality 3 seater sofa-I. Overall shall be seat Height - 450 mm, Height – 820 mm, Width & Depth shall be - Width-2055 mm and Depth-905mm.II. Understructure shall be made of 12 ± 1 mm thick hot pressed plywood of dia 4mm zig-zag type assembly is mounted in the understructure for support and additional cushioning purpose. III. The seat shall be made up of PU foam with density 32 ± 2 Kg/m³ having an additional top layer of PU foam with density 28 ± 2 Kg/m³, upholstered with fabric. IV. The back shall be made up of 28 ± 2 Kg/m³ with additional top layer of PU foam with density 32 ± 2 Kg/m³, upholstered with fabric. V. The leg is a welded assembly made up of stainless steel (grade SS 202) tube and plate. VI. The color shall be decided at the time of finalization of contract and shall be approved by the Employer. The model shall be approved by the employer before procurement.

Sofa for two seater Providing and placing premium quality 2 seater sofa- I. Overall size shall be Seat Height - 450 mm, Height – 820 mm, Width & Depths measured from pedestal - Width-1460 mm and Depth- 905 mm. II. Understructure shall be made of 12 ± 1 mm thick hot pressed plywood of dia 4mm zig-zag type assembly is mounted in the understructure for support and additional cushioning purpose. III. The seat shall be made up of PU foam with density 32 ± 2 Kg/m³ having an additional top layer of PU foam with density 28 ± 2 Kg/m³, upholstered with fabric. IV. The back shall be made up of 28 ± 2 Kg/m³ with additional top layer of PU foam with density 32 ± 2 Kg/m³, upholstered with fabric. V. The leg is a welded assembly made up of stainless steel (grade SS 202) tube and plate. VI. The color shall be decided at the time of finalization of contract and shall be approved by the Employer. The model shall be approved by the employer before procurement.

Center tabe 2'x2' 600mm W x 600mm D x 480mm H.) Providing and placing premium quality corner table- I. Overall size of the corner table shall be 600mm W x 600mm D x 480mm H. II. Top shall be made of 24mm thick high density plywood for load bearing capacity of up to 30 kgs. III. Understructure shall be made of curved rubber wood for ethnic design. IV. The color shall be decided at the time of finalization of contract and shall be approved by the Employer. The model shall be approved by the employer before procurement.

Single Bay Optimizor 4 body Providing and placing premium quality optimizers- I. Overall size shall be minimum 915 mm W x 2740 mm D x 1830 H. II. Rigid Knock Down construction shall be made of 0.8 mm thick CRCA Steel conforming to IS: 513 Gr.D. Each unit shall have 5 loading levels formed by 4 nos. adjustable shelves. Body units shall be bolted to undercarriage. Design of the system shall be made in such a way that there will be no issue of derailment and toppling of the bodies. It should be inherited within the understructure used and should not protrude outside the understructure. Back Panel of the individual body shall be in single piece to make the system dustproof and eliminating any issue related to alignment. III. Optimizer Height from ground is 2080 mm (1980 body + 65 undercarriage + 35 channel system). IV. The bodies including shelves shall be given antirust surface treatment & shall be powder coated with epoxy polyester powder. It shall involve an 8 step treatment consisting of Hot water rinse, Knock of degreasing, degreasing, cold water rinse, phosphating, cold water rinse, and passivation & dry off oven treatment. Final finish shall consist of epoxy polyester powder coating of approved color & shade with a Dry Film Thickness of minimum 40 microns. The testing of paint shall be done for various physical & chemical properties as per IS: 101. The material shall be then oven baked with a controlled temperature of 180 deg.C to 200 deg. V. Shelves are made of 0.8 thick CRCA steel conforming to IS: 513 Gr.D. Its max load bearing capacity is 40 Kg uniformly distributed per shelf. Shelves are mounted on support brackets & shelf level can be adjusted at approx. 25.4 pitches. There shall be 4 adjustable shelves per body giving 5 loading levels. The mounting of shelves shall be in such a way that it should flush with the body. Gap of more than 10 mm will not be acceptable. Shelf Depth for various options shall be 428. VI. The Undercarriage shall be of welded frame made of HR sheet 2 & 3.15 mm thick conforming to IS:10748 suitably fabricated to take the loads based on configuration.

VII. The undercarriage, after pre-treatment, shall be coated with final finish consisting of epoxy polyester powder coat of approved color & shade with a Dry Film Thickness of minimum 40 microns. VIII. Movement of units shall be achieved by pushing or pulling Chrome plated ‘C’ handle fitted onto 1.6 mm thick plate (mounted on each double & single movable units) & rigidly fixed at suitable height on body side. Each movable undercarriage shall have 4 nos. of antifriction ball bearings for rolling onto channels & 4 nos. of antifriction ball bearings for guiding between channels & ‘J’ section. IX. A Centralized locking arrangement shall be provided through Locking Stiffener mounted onto back of Single Last unit so that it gets locked on channels when all the units are brought together. The Recess handle lock shall be placed at suitable height. This arrangement occupies a space of 90 mm. The handle pertuding outside stiffners shall be not allowed for user safety.X. The nuts & bolts shall be galvanized / blackodized / Zn Plated. XI. Channel shall consist of ‘J’ section 2 mm thick HR sheet & 25 mm square bright bar – both connected by screws. Prior to the embedding of the guide channels with the help of raul plug & screw, the ground has to be in properly leveled condition. XII. Label holder shall be made from 2 mm thick clear transparent Acrylic sheet & having outer dimension of 155 mm X 106 mm.XIII. The color shall be decided at the time of finalization of contract and shall be approved by the Employer. The model shall be approved by the employer before procurement.ISO certification

Modular Workstation (single) Providing and placing of Modular tile based system WISH panel & tile based modular workstation, with partition thickness as 52.4 mm thick and height - 1200 including powder coated aluminium trims from ISO 9001, ISO 14001, ISO 18001, BIFMA, GreenGuard certified company of. Tiles: Combination of top tiles are fabric tackable /white board/ Prelaminated tile. Bottom tiles - Plain metal SPLIT Tiles: Combination of two finishes for the top tiles on the user side shall be split fabric tackable/ white board. INTERMEDIATE BLOCKS Intermediate blocks are given in DL + DL finish. Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. The color shall be decided at the time of finalization of contract and shall be approved by the Employer. The model shall be approved by the employer before procurement.

Recption counter PA Providing and placing premium quality reception table- I. Overall size of the table shall be 2410 mm W x 1065 mm D x 725 mm work surface height and 1035 mm counter height. II. Top shall be made of rubber wood with clean Matt PU finish of 18 mm thick, inside radius shall be 700 mm, outside radius shall be 1350 mm and depth shall be 650 mm. III. Cork shall be 18 mm thick of rubber. IV. Glass shall be frostered 10 mm thick diamond cut finishing on edges, inside radius shall be 1202.5 mm, outside radius shall be 1402.5 mm and depth shall be 200 mm. V. The Modesty Panel shall be made of MS Perforated sheet below work surface: 0.8 mm (thick) x 665 mm (height) x 1345 mm (flat length), Above work surface: 0.8 mm thick x 260 mm height x 1345 mm flat length. VI. The legs shall be of MS tube 1.6 mm thick diameter 50.8 mm and height 604 mm.

VII. Overall size of pedestal shall be 390 mm (W) x 440 mm (D) x 646 mm (H). VIII. The construction & Material used shall be welded assembled, 0.8 mm thick CRCA for body shell, drawer front & tray, front side stiffener, rear side stiffener and 1.2 mm thick CRCA Top stiffener & Bottom stiffener. IX. The drawer fronts shall be metal front straight edge. X. Locking shall be 10 lever cam lock & Central RH locking with actuator & lock channel mechanism for box-box-file Pedestal. XI. The top panel shall be metal straight edge top. XII. Castor shall be swiveling non - lockable castors mounted below the body shell for free standing full height mobile pedestal and M8 Leveling stud for free standing pedestal. XIII. The anti-tipping mechanism shall have fifth roller arrangement mounted below file drawer to avoid toppling of unit when file drawer is pulled out. XIV. Finish shall be epoxy polyester powder coated to the thickness of 50 microns. XV. The color shall be decided at the time of finalization of contract and shall be approved by the Employer. The model shall be approved by the employer before procurement.