Bridge Ropeway Tunnel And Other Infrastructure Development Corporation Of Uttarakhand Limited Tender

Table (1350mm Length x 675mm Width x 750mm Height ) Providing and placing premium quality table having - I. Over all minimum size of 1350mm Length x 675mm Width x 750mm Height . II. Table top shall be made in minimum 18 mm thick MDF/PLB board with 2 mm thick PVC edge banding on all sides fixed with hot melt glue. III. Under structure shall be made from minimum 0.9 mm thick C frame powder coated 50 microns CRCA MS sheet. The tubuler frame shall be made of MS ERW tube minimum size of 25mm square pipe having minimum thickness of 1.2mm. The leg should be equiped with nylon studs to prevent scratches on the floor and that should be fixed in such away that it should not come out easyly. IV. Modesty panel shall be made from minimum 1.0 mm thick powder coated 50 microns CRCA MS Sheet or it may be made in minimum 18 mm thick MDF/PLB board with 2 mm thick PVC edge banding on all sides fixed with hot melt glue. V. There should be mimimum five drawer storage on both side having overall size of 350mm W x 550mm D x 425mm H. The storage having shell and drawer tray of minimum 0.5 mm thick CRCA MS sheet and front minimum 0.6 mm thick CRCA IS:513 MS sheet. Also there should be 10 lever cam lock on both side drawers and handles to be built in plastic to pullout the drawer. VI. The color shall be decided at the time of finalisation of contract and shall be approved by the Employer. The model shall be approved by the employer before procurement.

Table (1650mm W x 900mm D x 735mm H & ERU 900mm W x 450mm D x 670mm H.) Providing and placing premium quality table - I. Overall size of table shall be minimum 1650mm W x 900mm D x 735mm H & ERU 900mm W x 450mm D x 670mm H. II. Table & ERU top shall be 25mm & 18mm thick respectively made of pre-laminated board. All edges shall be duly sealed with 2 mm thick PVC edge banding fixed with hot melt glue. The sides, front & back panels shall be pre-laminated twin board of minimum 18mm thickness as per IS:12823 with 2mm thick PVC edge bending on all Sides. front support tube shall be 1.6mm thick MS ERW tube of 32mm x 19mm.as per IS:7138. III. Understructure shall be having tubular frame made of 1.6mm thick MS ERW tube of minimum size 30mm x 30mm. as per IS:7138 IV. Table shall have storage having pedestal of combination of pre-laminated panels & MS sheets of size 430mm W x 729mm D x 536mm H. Also there should be ERU having hinged door unit of size 341mm W x 402mm D x 493mm H with one shelf. V. Finishing shall be done with Epoxy powder coating to all exposed metal parts with thickness of 50 microns (+/- 10). VI. The color shall be decided at the time of finalisation of contract and shall be approved by the Employer. The model shall be approved by the employer before procurement.

Chair (High back) 760mm W x 760mm D x 970-1090mm H, 425-545mm seat H. Providing and placing of ergonomically designed replaceable fabric upholstered highback chair I. Overall size shall be 760mm W x 760mm D x 970-1090mm H, 425-545mm seat H. II. The seat and back shall be made up of 12mm thick hot pressed plywood, upholstered with inhouse moulded polyurethane foam and fabric upholstery covers. The back foam shall be designed with contoured lumbar support for extra comfort. The seat shall be extra thick foam on front edge to give comfort to popliteal area. The Seat size should be of minimum size 470mm W x 480mm D and back of 475mm W x 695mm H. III. The high resilience polyurethane foam shall be moulded with density= 45±2 kg/m3 and hardness load 16 ± 2 kgf as. per IS:7888 for 25% compression. IV. The one-piece armrests shall be injection moulded from black Co.polymer Polypropylene. V. The mechanism shall be designed with 360° revolving type, Upright-position locking, Tilt tension adjustment, Seat/back tilting ratio of 1:3. The pneumatic height adjustment shall has an adjustment stroke of 120mm. The bellow shall be 3 piece telescopic type and injection moulded in black Polypropylene. The pedestal shall be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal shall be 660mm pitch-center dia. (760mm with castors). VI. The chair shall have passed all tests pertaining to BIFMA standards. VII. The color shall be decided at the time of finalisation of contract and shall be approved by the Employer. The model shall be approved by the employer before procurement.