All India Institute Of Medical Sciences Tender

Design, Fabrication, Supply, Installation, testing and commissioning of cubical typed TTA pane of size ( L 8800 mm * W 1200mm * H 2200 mm ).The Panel will confirm to IEC-61439-Factory built assemblies with totally enclosed free standing type dust and vermin proof LT Panel board, fully compartmentalized fabricated from 14(2MM)/16(1.6MM) SWG smooth and wrinkle free, CRCA sheet steel, approx. with 1200 mm depth for incomer and outgoing 4 pole Draw-out ACBs/MCCBs i/c TPN strip type aluminium bus bar of 4000 Amps. capacity complete with cable alley, duly powder coated in approved colour suitable for use on 415volt three phase with Neutral, 50Hz. AC Supply, indicating lamps, as protection relays, control wiring, auxiliary contacts, R, Y, B indicating lamps, Uniform Busbar, Multimeter, CTs, and Electrical and mechanical interlocking etc. As per site requirement and total no’s of incoming and outgoing metering and their accessories metering incoming and outgoing switch gear removable gland plate from TOP, Bust duct/cable entry from TOP along with following accessories: - 01 Nos. (Note: The technical specification of panel along with ACB, MCCB, Relays, metering and accessories must comply to CPWD general specification of electrical works.

Incomer Supply, Installation, Testing and commissioning of Electrically Charged EDO Type Microprocessor based, Draw out type 3200 Amps,75 KA, 4 Pole ACB along with protection relays, Electrically and mechanically charged with On/Off indication and associate accessories in existing panel, will have inbuilt 6NO+6NC Auxiliary contact, safety shutter assembly, racking handle, door seal frame, push button cover and rating error preventer with Complete control wiring as per direction of engineer on charge. Note :The incomer must be suitable for connecting 02 nos of sandwiched Busduct of 4000 ampere.

BusCoupler Supply, Installation, Testing and Commissioning of Electrically Charged EDO Type Microprocessor based, Draw out type 3200 Amps,75 KA, 4 Pole ACB along with protection relays, Electrically and mechanically charged with On/Off indication and associate accessories in existing panel, will have inbuilt 6NO+6NC Auxiliary contact, safety shutter assembly, racking handle , door seal frame, push button cover and rating error preventer with Complete control wiring as per direction of engineer on charge. Note :The incomer must be suitable for connecting 02 nos of sandwiched Busduct of 4000 ampere.