Yamuna Expressway Industrial Development Authority Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Yamuna Expressway Industrial Development Authority - YEIDA Tender
Eprocure
Opening Date15 Jan 2020
Closing Date28 Jan 2020
Tender Amount₹ 6,33,82,466
Costs
EMD
₹ 12,68,000Document Cost
₹ 1,770Tender Fee
Refer Documents
Summary
C/o Of 33kv Sub-station In Sector-32
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_YEIDA_421486_9Bid Award Id
ViewTender No
YEA/OSD(M)/2020/487 DT-02/01/2020Tender Authority
Yamuna Expressway Industrial Development Authority ViewPurchaser Address
-Website
http://etender.up.nic.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
33kV HT PANELS
-
-
-
... More
Indoor type 6 panel board Vacuum circuit breaker (1 No. Incomer 1250 Amps+ 2 No. Outgoing 1250 Amp+ 2 No. Tie Feeder 1250 Amp+ 1 No. Bus Coupler 1250 Amp) 33 KV, 3 phase, 31.5 KA for 1 sec. HT switch gear with all necessary protection, metering and other accessories as required (M.R. ITEM NO. 1)
1
7954375
7954375
... More
Indoor type 2 panel board Bus PT, 33 KV, 3 phase, 31.5 KA for 1 sec with all necessary protection, metering and other accessories as required (M.R. ITEM NO. 2(A))
1
311091
311091
... More
Supply, Installation, testing & commissioning of out door type 10 MVA with on load tap changer Power Transformer as per ISI specification including loading, unloading, local carriage & erection of the same on plinth & making all necessary connection etc. Complete in all respects as per specification(Make ABB/Crompton/Schinider) E-12.Cable termination box with disconnecting facility for 33 KV XLPE cable at 33 KV side.cable termination box with disconnecting facility for 11 KV XLPE cable at 11 KV side.
-
-
-
... More
On load tap changer+/- 7.5@2.5%,Bi directional roller,Conservator with drain valve,Earthing ferminals,Double diaphragm explosion vent,Radiator with top & bottom shut off valve,First filling of oil including make up fill,Silica gel breather with oil seal,Rating and diagram plate,Air Release plug,Buchholz relay with shut off valve,Winding temperature indicator (WTI),Oil temperature indicator (OTI),Megenatic oil level guage,Pressure relief device,Marshalling box.No load losses-8Kw, load losses 50KW,Toleronce as per I.S (Analysis of rates)
2
17545000
8772500
... More
11kV HT PANELS
-
-
-
... More
Indoor type 12 panel board Vacuum circuit breaker (2 No. Incomer 1250 Amps, 1 No. bus coupler 1250 Amps and 9 Nos.630Amp Outgoing) 11 KV, 3 phase, 25 KA for 1 sec. HT switch gear VCB breaker with all necessary protection, metering and other accessories as required. (Analysis of rates-18)
1
6966300
6966300
... More
Indoor type 2 panel board Bus PT, 11 KV, 3 phase, 25 KA for 1 sec with all necessary protection, metering and other accessories as required (M.R. ITEM NO. 2(B))
1
230307
230307
... More
DC BATTERY, CHARGER & DISTRIBUTION BOARD
-
-
-
... More
Supplying, assembling, installation, commissioning of Sealed maintenance free (SMF) 110V D.C., 200 AH batteries. The batteries shall rest on treated wooden planks fabricated from MS angle and free standing floor mounted rack with acid resistant finish and complete with series connecting electrical leads and charging of batteries. The batteries shall be accompanied with tester.
-
-
-
... More
This shall have incoming leads as well as outgoing leads and of suitable battery charger for 8 hrs charge of 200AH battery charger enclosed in sheet metal with fan on top and it should automatically charge the batteries With booster and trickle charge. Charger shall be complete with incoming & outgoing leads and D.C. Distribution board will have one set of 63 amps MCB as incomer and ten number of suitable rated MCB (as per coil rating of VCB) on outgoing side enclosed in metal sheet enclosure of 2mm thick and suitably painted. The unit will be complete with bus bars, accessories, links, terminal strip, clamps etc along with cables up to incoming & outgoing to VCB panels. (Analysis of rates E-7)
1
188744
188744
... More
HT CABLES & CABLE TERMINATIONS
-
-
-
... More
Supply, delivery, laying testing & commissioning of 33KV (E), XLPE cable having compacted circular staranded aluminium conductor, conductor screening of extruded semi conducting compound, cross linked polythylane (XLPE), insulation screening of the extruded semin conducting compound followed by copper tape, cores laid up, taped PVC inner sheath, single layer of steel strip armouring, overall PVC outer sheath conforming to IS: 7098 (Part-amendments) for following mentioned sizes.
-
-
-
... More
It should be operational at 33 KV, 50 Hz. AC system in ground at a depth of 1200 mm below ground level over a cushion of 75 mm thick sand alround and protected with bricks on sides and top on surface the cable run shall be fixed on M.S. clamps etc of suitable size or as directed by the E/I. Complete in all respect. The price are inclusive of all earth work such as digging, back filling, supply & spreading of good earth all around the cable, supply & providing cable identification markers. The installation should be complete in all respects and as per requirement of the job. (CCI (Bombay/Nashik), Fort Gloster (Calcutta / Baripara), Asian (Thane / Silvasha), Universal (Satna), Nicco (Calcutta), ICL (Rajpura), Diamond, Havells make
-
-
-
... More
33kV, 3C X 400 sq. mm. from 33kV HT Panel to 33/11kV Power transformer (Analysis of rates-4e)
50
131150
2623
... More
11kV, 3C X 300 sq. mm. (From 33/11 Power Transformer to 11 KV HT Panles) (Analysis of rates-3g)
200
319200
1596
... More
Supply, Delivery, Installation, Testing & Commissioning of 33KV, following type cable termination kit complete in all respects as required for proper completion of work. (make Raychem, CCI, Frontec) SOR-10
-
-
-
... More
33kV, 3C X 400 sq. mm. XLPE insulated, Aluminum conductor E grade, strip armoured cable (Analysis of rates-10d)
2
58834
29417
... More
11kV, 3C X 300 sq. mm. XLPE insulated, Aluminum conductor E grade, strip armoured cable (Analysis of rates-5d)
8
107072
13384
... More
Supply, Installation, testing and commissioning of Outdoor REYCHEM RPG push on type termination kits suitable for following sizes of 33 & 11 kV, XLPE insulated Aluminum conductor E grade, strip/round wire armoured cable.
-
-
-
... More
33kV, 3C X 400 sq. mm. XLPE insulated, Aluminum conductor E grade, strip armoured cable from 33kV HT Panel to 33/11kV Power transformer (Analysis of rates-10d)
2
95260
47630
... More
11kV, 3C X 300 sq. mm. XLPE insulated, Aluminum conductor E grade, strip armoured cable (Analysis of rates-6d)
4
78124
19531
... More
CONTROL CABLE
-
-
-
... More
Supply, Installation, testing and commissioning of Control cables of following sizes to be laid buried in ground or laid on cable trays for transformers and VCB
-
-
-
... More
1.1kV GRADE STRANDED COPPER CONDUCTOR, PVC INSULATED WRAPPED PVC INNER & OUTER SHEATHED CABLE.
-
-
-
... More
CABLE 4CX2.5SQMM (Analysis of rates E-49)
200
25800
129
... More
CABLE 19CX1.5SQMM (M.R. ITEM NO. 21)
200
61600
308
... More
Supply, Installation, testing and commissioning of Cable end terminations/Glands/lugs for 1.1kV grade stranded copper conductor, pvc insulated wrapped pvc inner & outer sheathed cable for transformers and VCB.
-
-
-
... More
CABLE 4CX2.5SQMM (M.R. ITEM NO. 23)
4
392
98
... More
CABLE 19CX1.5SQMM (M.R. ITEM NO. 23)
4
596
149
... More
DISTRIBUTION BOARDS
-
-
-
... More
Supplying and fixing following way prewired TP&N MCB distribution board of steel sheet for 415 volts on surface/ recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections, powder painted including earthing etc of DB's (FOR LIGHTING & SMALL POWER)
-
-
-
... More
Note- Each incoming and outgoing MCB's shall have Ics = 10 kA minimum
-
-
-
... More
12 Way TPN DB Incoming
1 No. 63A 4P MCB 3 Nos. 40A DP ELCB in each incomer (100 mA Sensitivity)
Outgoing
36 Nos 6/16A SP MCB's spread equally in each phase. (M.R. ITEM NO. 8)
2
45300
22650
... More
POWER SOCKETS
-
-
-
... More
Supply, Installation, testing and commissioning of OF POWER SOCKETS,SWITCH COMPLETE WITH ACCESSORIES LIKE GI BOXES,SHEET STEEL ENCLOSURE ETC. AS REQUIRED.
-
-
-
... More
2 Nos. 6/16 Amps 5 pin socket controlled by separate 16 Amps modular type switch for each socket housed in GI box of suitable size (UPS socket for computer). (DSR 1.24.5 & 1.32 (2016))
2
1118
559
... More
6/16 Amps 6 pin socket controlled by 16 Amps modular type switch housed in GI box of suitable size. (DSR 1.24.5 & 1.32 (2016))
33
18447
559
... More
Flame proof/Retardent type 6/16 Amps 6 pin socket controlled by 16 Amps modular type switch housed in GI box of suitable size. (M.R.(MDS-LEGRAND))
3
4044
1348
... More
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete. [DSR(E&M)-2016/2.18/P-14]
5
4900
980
... More
63 A TP metal clad industrial socket controlled by 63 A TP MCB housed in sheet steel enclosures (DSR 7.41 & 2.9.1 (2016))
2
15302
7651
... More
LIGHTING FIXTURES
-
-
-
... More
Supply, Installation, testing and commissioning of lighting fixtures shall include the supporting steel structures, clamps/connectors and all other accessories required for proper fixing of the lighting fittings.
-
-
-
... More
Supply of luminaires complete with accessories like lamps, ballasts, power factor improvement capacitors, starters etc as an integral part of luminaire. However, in case of Non-integral type luminaires rate shall include separate metal enclosed control gear box with terminal block suitable for loop-in, loop-out connection. Outdoor type fixtures shall be provided with outdoor type weather-proof box with IP 54 or better. All fixtures shall be wired with Electronic ballast.
-
-
-
... More
2x28W Surface mounted fixtures complete with choke, starter, T5 lamps etc.(Wipro catalogue no.WIF 20228/equivalent) (M.R. ITEM NO. 24)
48
99600
2075
... More
2x28/36W Surface mounted flame proof type fixtures complete with choke, starter, T5 lamps etc.(Crompton Greaves-EXTL240/equivalent) (M.R. ITEM NO. 29)
2
36296
18148
... More
2x18W surface type compact fluorescent fixtures complete with choke, starter, tube etc.(Wipro catalogue no.WVP 45218/equivalent) (M.R. ITEM NO. 30)
4
8972
2243
... More
2x28W recessed mounted fixtures complete with choke, starter, T5 lamps etc.(Wipro catalogue no.WVF 58228/equivalent) (M.R. ITEM NO. 31)
10
32110
3211
... More
2x28W outdoor type wall mounted fixtures complete with all accessories as required.(Philips HGS-120 or Equivalent) (M.R. ITEM NO. 33)
5
11570
2314
... More
250W Metal halide flood light including 1 X 250W Metal halide lamp, control gear box etc. complete with all accessories.(Wipro- WFZ 42250 or Equivalent) (M.R. ITEM NO. 32)
2
19302
9651
... More
CEILING / WALL BRACKETS/ EXHAUST FANS
-
-
-
... More
Supply, Installation, testing and commissioning of 1200mm dia sweep ceiling fan with standard down rod. (M.R. ITEM NO. 34)
9
19188
2132
... More
Supply, Installation, testing and commissioning of Oscillating type wall fan 400mm dia. (M.R. ITEM NO. 35)
2
4396
2198
... More
Supply, Installation, testing and commissioning of 300mm dia heavy duty 900 RPM exhaust fan complete with louvered shutters. (M.R. ITEM NO. 36)
10
32310
3231
... More
POINT WIRING
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
... More
Group C [DSR(E&M)-2016/1.10.3/P-2]
Note:-Telephone, computer wiring are not in the scope of electrical works.
92
69644
757
... More
SUB-MAIN WIRING
-
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
... More
2x2.5 Sqmm + 1x2.5 Sqmm earth wire [DSR(E&M)-2016/1.14.2/P-3]
50
6850
137
... More
2x4 Sqmm + 1x4 Sqmm earth wire [DSR(E&M)-2016/1.14.3/P-3]
300
50400
168
... More
2x6 Sqmm + 1x6 Sqmm earth wire [DSR(E&M)-2016/1.14.4/P-3]
100
22700
227
... More
4x16 Sqmm + 2x6 Sqmm earth wire [DSR(E&M)-2016/1.14.11/P-3]
100
73300
733
... More
EARTHING SYSTEM
-
-
-
... More
Supply, Installation, testing and commissioning of earthing system
-
-
-
... More
GI PLATE EARTHING FOR TRANSFORMERS BODY AND HT PANELS
-
-
-
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. [(DSR(E&M)-2016/5.4/P-27)]
8
34616
4327
... More
CU PLATE EARTHING FOR TRANSFORMERS NEUTRALS
-
-
-
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. [DSR(E&M)-2016/5.6/P-27]
4
33156
8289
... More
PIPE EARTHING FOR LIGHTNING ARRESTER LPDB,BUILDING EARTHING )
-
-
-
... More
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. [DSR(E&M)-2016/5.2/P-27]
16
58752
3672
... More
ELECTRONIC EARTHING FOR INSTRUMENTATION SYSTEM
-
-
-
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. (but without charcoal/ coke and salt) as required. [DSR(E&M)-2016/5.3/P-27]
4
14332
3583
... More
Supply,fixing and terminating of following conductors with PVC sleeves and wires in trenches including providing sand cushioning, brick protection etc. or laying on surface with GI clamps, bolts and nuts etc.
-
-
-
... More
40 x 10 mm GI strip (M.R. ITEM NO. 20)
300
76200
254
... More
32 x 6 mm Copper strip (DSR 6.13 (2016))
80
85360
1067
... More
25 x 5 mm GI strip (DSR 5.9 (2016))
50
4250
85
... More
25 x 5 mm braided copper tape (DSR 5.14 (2016))
75
52350
698
... More
25 x 6 mm GI strip (DSR 5.9 (2016))
50
4250
85
... More
CABLE TRAYS
-
-
-
... More
Fabrication /Supply and Installation of Cable trays with accessories such as coupling plates, bends, tees, reducers, coupling nut-bolts etc. of following width. The cost of installation shall include connection, bolting, cutting, etc.The supporting steel for cable trays shall be painted type and Cable trays, accessories and covers shall be painted with one shop coat of red oxide zinc chromate primer and two site coats of aluminium alkyd paint.
-
-
-
... More
Ladder type trays– Prefabricated 2.5mm G.I.(Hot Dip Galvanised),75mm flange height
-
-
-
... More
600 mm width (M.R. ITEM NO. 12)
200
152200
761
... More
450 mm width (M.R. ITEM NO. 13)
100
60700
607
... More
Perforated type trays– Prefabricated 2.5mm G.I.(Hot Dip Galvanised),75mm flange height .
-
-
-
... More
300 mm width (DSR 4.1.4 (2016))
100
52600
526
... More
150 mm width (DSR 4.1.2 (2016))
50
19650
393
... More
100 mm width (DSR 4.1.1(2016))
50
17400
348
... More
Cable tray covers: Cable tray Covers shall be of GI sheet of 1.6 mm thick with clip fix clamps
-
-
-
... More
Cover for 150mm wide tray (M.R. ITEM NO. 18)
50
15100
302
... More
Cover for 100mm wide tray (M.R. ITEM NO. 19)
50
12350
247
... More
LIGHTNING PROTECTION SYSTEM
-
-
-
... More
Supplying, fixing & commissioning vertical air terminating fixtures with spikes mounted on 25mm dia GI pipe of atleast 2000mm length with base plate, bonding of earth strips etc. DSR 6.2 (2016))
1
304
304
... More
Air Termination System
-
-
-
... More
Supply & laying of 20 x 3 mm GI Strip as ring conductor. (DSR 6.7 (2016))
250
16500
66
... More
Down conductors
-
-
-
... More
Supply & laying of 20 x 3 mm GI Strip as ring conductor. (DSR 6.8 (2016))
50
5000
100
... More
Testing Joints & earth termination system
-
-
-
... More
Providing test links with enclouser (DSR 6.12 (2016))
3
219
73
... More
Earth pits G.I. pipe earthing complete as per specifications. (Ordinary type) (DSR 5.2 (2016))
3
11016
3672
... More
Iditification plate of earthing pit with associated work (MR Item No.-38)
3
408
136
... More
MISCELLANEOUS ITEMS
-
-
-
... More
Earth work in excavation in ordinary soil in all type of foundation trenches including dressing of the side and ramming of bottom. Lifts upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. All kinds of soil. (MORTH/A.R./GNIDA)
-
-
-
... More
Depth from 0.0 to 1.5 M below G.L.
500
80225
160.45
... More
Supplying, fixing, testing & commissioning heavy duty PVC pipe with all necessary conduit accessories etc. of the following sizes
-
-
-
... More
100mm dia conduit (MR Item No-3)
20
5800
290
... More
300mm dia conduit (MR Item No-4)
20
53520
2676
... More
Supply & Laying of double wall corrugated ( DWC) pipes of following dia hume pipe/HDPE Pipes for crossing the cables under the roads and paved areas & underground cable protection as per IS 14930 Part II. With necessary connecting socket/couplings, tees of some material at required depth up to 900 mm below road ground surface. backfilling of with light ramming is included in the scope.
-
-
-
... More
120mm dia dwc (Analysis of rates-52)
100
112600
1126
... More
Supply & Installation of following Items:-
-
-
-
... More
33 kV Danger Caution Boards (Danger Notice Plates) as per IS 2551 & IS 8923 (DSR 2.22 (2016))
2
326
163
... More
11 kV Danger Caution Boards (Danger Notice Plates) as per IS 2551 & IS 8923 (DSR 2.22 (2016))
2
326
163
... More
HV insulating mats confirming to IS 15652-2006. The mats should have been type tested by CPRI or another third party lab of equivalent stature. The mats shall be moisture proof, fire retardant and resistant to acids, alkalies & transformer oil.
2
10898
5449
... More
First Aid box (MR Item No-05)
1
340
340
... More
Shock treatment chart (MR Item No-39)
1
444
444
... More
Sub-Station Automation System
-
-
-
... More
Supply, assembling, installation, commissioning and testing of SCADA gateway and system at sub-station level complete with 1 No. data concentrator in a panel, 1 No. ethernet switch, GPS clock, FOTE equipment 1 No. laptop, 1 No. Desktop for local HMI, 1 NO. UPS (5 KVA), Radio modem and all other accessories as reqiured. (MR Item No-41)
1
5273007
5273007
... More
Optical Fiber Cable
-
-
-
... More
Supply, Installation, testing and commissioning of Optical Fiber Cable armoured of following sizes to be buried in ground / laid in trays, installation of cable markers. Miscellaneous items such as clamp, cleat cable tags etc. are included in the scope.
-
-
-
... More
6 core, multi mode armoured optical fiber cable (for sub station local/data concentrator) (MR Item No-43)
150
7950
53
... More
12 core, single mode armoured optical fiber cable (from sub station to LDC) (MR Item No-43)
5000
1025000
205
... More
Part-B : (Structural Part)
-
-
-
... More
Earth work
-
-
-
... More
Earth work in excavation in ordinary soil in all type of foundation trenches including dressing of the side and ramming of bottom. Lifts upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. All kinds of soil. (MORTH/A.R./GNIDA)
-
-
-
... More
Depth from 0.0 to 1.5 M below G.L.
1227.34
196926
160.45
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m. (AR/GNIDA)
579.42
45890
79.2
... More
Carriage/disposal of earth/material by mechanical transport including loading, unloading and stacking. (AR/GNIDA). Earth:
-
-
-
... More
Lead upto 2.0 Km.
647.92
45645
70.45
... More
Concrete Work
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size). (DSR-16/4.1.8/P-88)
119.22
533885
4478.15
... More
1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size). (DSR-16/4.1.8/P-88)
20
89563
4478.15
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. “(Note:- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).
-
-
-
... More
All works upto plinth level. (DSR-16/5.33.1/P-102)
407.12
2624478
6446.45
... More
All works above plinth level upto floor V level. (DSR-16/5.33.2/P-102)
334.84
2427606
7250.05
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) (DSR-16/4.10/P-90)
45
11839
263.1
... More
Reinforcement steel work/Steel Ebmeements
-
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more./Cold twisted bars. (DSR-16/5.22.6/P-100)
46000
2603600
56.6
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
... More
Cold twisted bars (DSR-16/5.22A.3/P-99)
55000
3113000
56.6
... More
Providing and fixing bolts including nuts and washers complete. (DSR-16/10.20/P-185)
3938.76
379105
96.25
... More
Form work
-
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete. (DSR-16/5.9.1/P-98)
790.2
153259
193.95
... More
Suspended floors, roofs, landings, balconies and access platform (DSR-16/5.9.3/P-98)
3686.19
1556678
422.3
... More
Steel work
-
-
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (DSR-16/10.2/P-182)
9399.44
635402
67.6
... More
Brick work/Concrete block masonry
-
-
-
... More
Brick work with bricks of class designation 150 in foundation and plinth in:
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR-16/6.1.2/P-111)
101
479916
4751.65
... More
Brick work with bricks of class designation 150 in superstructure above plinth level upto floor V level in all shapes and sizes in:
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR-16/6.4.2/P-111)
298
1663689
5582.85
... More
Half brick masonry with bricks of class designation 150 in superstructure above plinth level upto floor V level.
-
-
-
... More
Cement mortar 1:4 (1 cement : 4 coarse sand). (DSR-16/6.13.2/P-112)
34
23262
684.2
... More
Finishing work (Plaster)
-
-
-
... More
12mm cement plaster of mix: 1:6 (1 cement : 6 fine sand) (DSR-16/13.1.2/P-227)
1440
230904
160.35
... More
6mm cement plaster of mix: 1:3 (1 cement : 3 fine sand) (DSR-16/13.16.1/P-228)
670.4
96403
143.8
... More
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). (DSR-16/13.11/P-228)
456
116530
255.55
... More
Wall Finishing
-
-
-
... More
White washing with lime to give an even shade: New work (three or more coats) (DSR-16/13.37.1/P-230)
128.8
2221
17.25
... More
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work. (DSR-16/13.60.1/P-232)
808.8
68303
84.45
... More
Finishing walls with water proofing cement paint of required shade : New work (two or more coats applied @ 3.84 Kg/10 Sqm.) (DSR-16/13.44.1/P-230)
147.2
8655
58.8
... More
Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade :
Two or more coats on new work. (DSR-16/13.64.1/P-233)
491.2
42169
85.85
... More
Wall Dado
-
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR-16/11.36/P-196)
158.4
117976
744.8
... More
Wall Skirting
-
-
-
... More
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.
-
-
-
... More
18mm thick. (DSR-16/11.6.1/P-191)
123.7
43301
350.05
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).
-
-
-
... More
Size of tile 500x500mm (DSR-16/11.47.1/P-198)
189.9
210722
1109.65
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
-
-
-
... More
Granite work. (DSR-16/8.3.2/P-128)
19.2
4717
245.7
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. (DSR-16/11.27/P-195)
32
39622
1238.2
... More
Floor finish
-
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.
-
-
-
... More
Size of tile 1000x1000mm (DSR-16/11.41.4/P-197)
180
370413
2057.85
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete. (DSR-16/11.37/P-196)
49.5
34073
688.35
... More
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge.
-
-
-
... More
In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand). Acid and alkali resistant tile (DSR-16/11.21.1.1/P-194)
413.1
443400
1073.35
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. (DSR-16/11.27/P-195)
67.5
83578
1238.2
... More
Ceiling finish
-
-
-
... More
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work. (DSR-16/13.60.1/P-232)
156.8
13241
84.45
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer. (DSR-16/13.41.1/P-225)
309.6
29009
93.7
... More
External finish
-
-
-
... More
Finishing walls with Acrylic Smooth exterior paint of required shade :
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). (DSR-16/13.46.1/P-231)
456
43798
96.05
... More
Plinth Protection
-
-
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. (DSR-16/4.17/P-90)
72
32425
450.35
... More
Terracing
-
-
-
... More
Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) 78, solar reflection 0.70 and initial emittance 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. (DSR-16/12.55/P-219)
383.25
440737
1150
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
-
-
-
... More
In 75x75mm deep chase (DSR-16/12.21.1/P-211)
76.5
11704
153
... More
Door shutters
-
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
-
-
-
... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. (DSR-16/9.20.1/P-148)
55.8
138883
2488.95
... More
Door Frames
-
-
-
... More
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:
-
-
-
... More
Profile C - Fixing with adjustable lugs with split end tail to each jamb (DSR-16/10.14.2.1/P-183-184)
212
77072
363.55
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.
-
-
-
... More
80x1.25mm M.S. laths with 1.25mm thick top cover. (DSR-16/10.6.1/P-182)
10
23161
2316.1
... More
Aluminium windows Doors
-
-
-
... More
Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. (DSR-16/21.10/P-376)
194
616182
3176.2
... More
Sanitary Fixtures
-
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
-
-
-
... More
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. (DSR-16/17.1.1/P-292)
2
6988
3494.2
... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
-
-
-
... More
W.C. pan with ISI marked white solid plastic seat and lid. (DSR-16/17.3.1/P-292)
6
27562
4593.75
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
-
-
-
... More
White vitreous China wash basin size 630x450 mm with a single 15mm C.P. brass pillar taps. (DSR-16/17.7.2/P-293)
8
16164
2020.6
... More
Providing and fixing toilet paper holder: C.P. brass (DSR-16/17.34.1/P-297)
8
3082
385.35
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
-
-
-
... More
One urinal basin with 5 litre white P.V.C. automatic flushing cistern. (DSR-16/17.4.1/P-292)
4
13976
3494.15
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15mm nominal bore (DSR-16/18.50.1/P-334)
2
1110
555.3
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931 : 15mm nominal bore (DSR-16/18.53.1/P-334)
14
6659
475.7
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (DSR-16/18.48/P-334)
-
-
-
... More
Circular tank. (DSR-16/18.48.1/P-334)
3000
21750
7.25
... More
Providing and fixing soil, waste and vent pipes:
-
-
-
... More
100mm dia: Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989. (DSR-16/17.35.1.2/P-297)
62
57142
921.65
... More
75mm diameter: Centrifugally cast (spun) iron socketed pipe as per IS: 3989. (DSR-16/17.35.2.2/P-297)
78.75
62570
794.55
... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter :
-
-
-
... More
100mm (DSR-16/17.58.1/P-304)
40
12398
309.95
... More
75mm (DSR-16/17.58.2/P-304)
50
13180
263.6
... More
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
-
-
-
... More
100x100x100 mm: Sand cast iron S&S as per IS - 3989 (DSR-16/17.43.1.2/P-300)
8
4984
623
... More
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
-
-
-
... More
75x75x75 mm: Sand cast iron S&S as per IS - 3989 (DSR-16/17.43.2.2/P-300)
12
5668
472.35
... More
Providing and fixing terminal guard:
-
-
-
... More
100 mm: Sand cast iron S&S as per IS - 3989 (DSR-16/17.56.1.2/P-303)
5
1328
265.6
... More
75 mm: Sand cast iron S&S as per IS - 3989 (DSR-16/17.56.2.2/P-303)
5
1328
265.6
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
-
-
-
... More
100 mm inlet and 75 mm outlet: Sand cast iron S&S as per IS: 3989 (DSR-16/17.60.2.1/P-304)
14
15019
1072.8
... More
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :
-
-
-
... More
For 100mm dia pipe (DSR-16/17.37.1/P-298)
40
6694
167.35
... More
For 75mm dia pipe (DSR-16/17.37.2/P-298)
50
8252
165.05
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
... More
With brick of class designation-150 (DSR-16/19.7.1.1/P-356)
5
43170
8634.1
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
-
-
-
... More
15 mm nominal outer dia Pipes (DSR-16/18.7.1/P-325)
72
10292
142.95
... More
20 mm nominal outer dia Pipes (DSR-16/18.7.2/P-325)
72
12956
179.95
... More
25 mm nominal outer dia Pipes (DSR-16/18.7.3/P-325)
90
19458
216.2
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
... More
150 mm dia R.C.C. pipe (DSR-16/19.6.2/P-355)
45
16051
356.7
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :
-
-
-
... More
150 mm diameter S.W. pipe (DSR-16/19.2.2/P-354)
8.15
6209
761.85
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931: 15mm nominal bore (DSR-16/18.49.1/P-334)
8
2973
371.7
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. (DSR-16/17.71/P-306)
6
827
137.85
... More
Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
... More
Kitchen sink with drain board:
-
-
-
... More
510x1040mm bowl depth 178mm (DSR-16/17.10.1.4/P-294-295)
2
7428
3714.25
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
-
-
-
... More
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. (DSR-16/17.73.2/P-306)
6
2536
422.7
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (DSR-16/17.31/P-297)
8
6543
817.95
... More
Miscellaneous Building works
-
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
-
-
-
... More
Granite of any colour and shade. Area of slab over 0.50 Sqm. (DSR-16/8.2.2.2/P-128)
6.1
18991
3113.3
... More
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
-
-
-
... More
Made of G.I. wire of dia 4 mm. (DSR-16/16.70.1/P-278)
67.64
37993
561.7
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
... More
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (DSR-16/10.25.2/P-185)
125
10743
85.95
... More
Water proofing work on Terrace
-
-
-
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
-
-
-
... More
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
-
-
-
... More
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
-
-
-
... More
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge.
-
-
-
... More
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
-
-
-
... More
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
-
-
-
... More
With average thickness of 120mm and minimum thickness at khurra as 65mm. (DSR-16/22.7.1/P-382-383)
365.75
378423
1034.65
... More
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:
-
-
-
... More
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.
-
-
-
... More
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.
-
-
-
... More
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.
-
-
-
... More
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/ sqm). (DSR 16/22.3/P-381)
24
12141
505.9
... More
Sunken Area Filling
-
-
-
... More
Provided and filling on Sunken areas with broken light weight concrete block bats of approximately six hundred kg per Cum dencity laid, consolidated, finished smooth with 50 mm to 60 mm thick PCC and including finishing and grouting the tope layer with water proof cement mortar of required thickness (mkt)
10.8
2970
275
... More
Anti termite treatment
-
-
-
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
-
-
-
... More
Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. (DSR-16/2.35.1.1/P-80-81)
574
9643
16.8
... More
Add labour cess @ 1% on all above items
62754917.15
627549
0.01
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements