Uttar Pradesh Projects Corporation Limited Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Projects Corporation Limited - UPPCL Tender
Civil And Construction
Civil Works Others
Excavation
Eprocure
Opening Date17 Feb 2025
Closing Date22 Feb 2025
Tender Amount₹ 7,88,70,000
Technical
Technical
Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender is "A" & Above.
Technical Capacity
... View More
The required prior work experience for the bidder includes experience in similar works, specifically "Construction of Building Works". The definition of similar work considers the number of storeys in the building, with requirements such as completing balance construction work of one building up to five storeys, one building of five storeys, one building of eight storeys, and one building of ten storeys. The bidder should have completed similar works with a minimum value, which can be calculated based on the bidding capacity formula. The values and percentages of similar works completed are:
- 40% of the estimated cost for three similar completed works
- 50% of the estimated cost for two similar completed works
- 80% of the estimated cost for one similar completed work For specialized works such as Pile work, Aluminum work, Steel Structure Work, Metallic Roofing work, and Water proofing work, the bidder should have:
- Three similar works each costing not less than 40% of the cost of this job in tender
- Or two similar works each costing not less than 50% of the cost of this job in tender
- Or one similar work costing not less than 80% of the cost of this job in tender The total estimated cost of the work is Rs. 788.70 lac. The bidder should also have an average annual financial turnover during the last 5 years, with the previous financial year's turnover being at least 30% of the estimated cost. The bidder should not have incurred any loss in more than 2 years during the last 5 years. The bidding capacity of the contractor should be equal to or more than the work put to tender, calculated using the formula: Bidding Capacity = {[AxNx2.5]-B}, where A is the maximum turnover in construction works, N is the number of years prescribed for completion of work, and B is the value of existing commitments and ongoing works.
Costs
EMD
₹ 15,77,000Document Cost
₹ 17,700Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_UPPRC_1007275_1Tender No
64/UPPCL/GM-1/2024-25/E-TENDER Dated-11.02.2025Tender Authority
Uttar Pradesh Projects Corporation Limited ViewPurchaser Address
-Website
http://http://upprojects.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Providing edge moulding to granite stone in steps, including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge
12
342
4104
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge,(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.).
148.91
539
80311.63
... More
Providing and Fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cememt mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.
443.59
476
211548.07
... More
Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases.
6337.05
44
282949.28
... More
FOOD COURT
-
-
-
... More
Providing edge Sand Stone Moulding
137.2
128
17595.9
... More
Providing edge moulding to granite stone in steps, including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge
104.1
342
35602.2
... More
Providing and Fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cememt mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.
654.68
476
312217.85
... More
Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases.
9352.6
44
417593.72
... More
CARETAKER
-
-
-
... More
Providing and laying in Cement concrete 8:4:1 of not less than strength of stone ballast( 40 mm nominal size) 4 apprroved coarse sand :1 Cement and curing complete,including cost of form work in foundation and floors
5.13
4756
24400.74
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
278.4
108
30337.25
... More
Providing and laying in situ five course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0 mm thick of 3.00 Kg/ sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 5th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately).
89.62
371
33293.83
... More
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4)Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 5 liters/sqm (6) Treatment of soil apron along external perimeter 5 liter per SQM
63.12
199
12592.44
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer
249.3
129
32316.76
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 kg/10 sqm)
29.1
112
3263.27
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
11.76
2425
28525.29
... More
Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only
11.76
333
3925.02
... More
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
-
-
-
... More
Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)
8.27
5962
49313.35
... More
Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. Bansi Paharpur
11.27
18581
209408.43
... More
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Bansi Paharpur - exposed face fine dressed with rough backing . 30 mm thick
164.18
3418
561183.66
... More
Extra for pre finished nosing in treads of steps of sand stone slab
110.36
128
14153.67
... More
Providing edge moulding to 30mm thick granite stone in steps, including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge
6.4
342
2188.8
... More
Ornamantal Stone work for wall lining including pan patti design etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Bansi Paharpur - exposed face fine dressed with rough backing . 40 mm thick
24.55
8365
205377.94
... More
P/F Bansi Paharpur cladding as per approved sample over RCC Pillars in C M 1:3 as per approved design, patteren and drawing .finishing with flush pointing in white cement mixed with pigment to match the shade etc complete in all respect and as directed by engineer in charge
0.9
94793
85314.47
... More
Providing and laying rectified Glazed CERAMIC FLOOR TILES of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
43.45
1005
43669.86
... More
Providing and fixing Ist quality ceramic glazed WALL TILES conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
24.79
885
21947.83
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
7.22
1049
7575.95
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
-
-
-
... More
Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent
19.25
3129
60234.6
... More
Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.05 metre.
19.25
30
593.48
... More
Providing and Fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cememt mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.
564.84
498
281757.64
... More
Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases.
2419
30
74142.35
... More
ELECTRICAL WORK
-
-
-
... More
SUB-HEAD : INTERNAL WIRING
-
-
-
... More
Wiring for Light point / Fan point / Exhaust Fan point / Call Bell point with 1.5 sq.mm FRS PVC insulated copper conductor single core cable in surface / recessed steel. conduit , with modular switch ,modular plate ,suitable GI box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required. Group - C
38
1382
52550.96
... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C
12
820
9840.12
... More
Wiring for light / power plug point with FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit alongwith FRLS PVC insulated copper conductor single core cable for loop earthing as required. 2 X 1.5 sq.mm +1 X 1.5 sq.mm earth wire
360
245
88236
... More
Wiring for MCB controlled points with 2x2.5 sq. mm FRLS PVC insulated stranded copper conductor 1100 Volt grade wires in 25 mm dia steel conduit surface/concealed conduit including cost of providing saddles etc for surface conduiting and/or cost of cutting and filling chases for recessed conduiting and including the cost of running 1x 2.5 sq mm PVC insulated copper conductor wire for loop earthing etc. complete as per specifications and as required. (Cost of MCB included in the item for DB)
180
276
49784.4
... More
Wiring for light / power plug point with 2 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit alongwith 1 No. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
280
324
90876.8
... More
Wiring for light / power plug point with 2 x 6 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit along with 1 No. 6 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
40
441
17659.2
... More
Wiring for light / power plug point with 4 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit along with 2 No. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
20
496
9924
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
18
357
6435.72
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess ,including providing and fixing 6 pin 15 / 16 & 5 / 6 amps modular socket outlet and 15 / 16 amps modular switch, connection, etc.as required.
14
439
6149.36
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).( UPS) & TV SOCKET
4
506
2026.8
... More
Wiring for circuit / submain wiring along with earth wire with the following sizesof FRLS PVC insulated copper conductor ,single core cable in surface / recessed steel conduit as required.
-
-
-
... More
2 X 2.5 sq.mm +1 X 2.5 sq.mm earth wire
180
245
44118
... More
2 X 4 sq.mm +1 X 4 sq.mm earth wire
280
320
89826.8
... More
4 X 2.5 sq.mm +2 X 2.5 sq.mm earth wire
50
419
20987.5
... More
Supplying & fixing suitable size GI box wih modular plate and
cover in front on surface or in recess including providing and
fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
2
544
1089.84
... More
SUB-HEAD : ERRECTION OF FANS & LIGHT FIXTURES
-
-
-
... More
Supplying and fixing Circular C.I. Box for ceiling fan internal dia 140 mm, 73 mm height, toplid of 1.5mm thick MS sheet as required.
10
41
419
... More
Supplying and fixing two module stepped type electronic fan,regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
10
276
2765.8
... More
Installation, testing and commissioning of prewired flourescent fitting/compact flourescent fitting of all types complete with all accessories and tube etc directly on ceiling/wall including connections with 3x1.5 sq.mm FRLS PVC insulated copper conductor single core cable and earthing as required.
40
154
6176.4
... More
Installation, testing and commissioning of prewired fluorescent fitting /compact fluorescent fitting of all types,complete with all accessories and tube etc including supplying and fixing ball and socket arrangement, 2 nos down rods of 20mm dia x1.6mm thick steel conduit up to 30cm length, painting and wiring the down rod and connections with 3x1.5 sq.mm FRLS PVC insulated copper conductor , single core cable and earthing etc . as required .
-
-
-
... More
Installation, testing and commissioning of ceiling fans/bracket fan of all sizes including wiring the down rod .of standard length (up to 30 cm ) with 3x1.5 sq.mm FR PVC insulated copper conductor single core cable including providing and fixing phenolic laminated sheet cover on the fan box etc as required.
10
254
2541
... More
Installation of exhaust up to 450mm sweep & in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as required
4
492
1969.8
... More
SUB-HEAD : EARTHING
-
-
-
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
4
5600
22402.56
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
40
182
7315.6
... More
SUB-HEAD : DISTRIBUTION BOARD
-
-
-
... More
Supplying and fixing following way prewired triple pole and neutral, sheet steel for 415 volts on surface/recess complete with loose wire box,terminal connector for all incoming and outgoing circuits,duly prewired with suitable size FRLS PVC insulated copper conductor upto terminal blocks,tinned copper busbar,neutral link, earth bar,din bar,detachable gland plate, interconnections, powder painted including earthing etc. as required. (But without MCB / RCCB / Isolator)
-
-
-
... More
8 way (4 + 24), Double door
2
4472
8945.12
... More
single pole
24
191
4605.12
... More
PLUMBING WORK
-
-
-
... More
SUB HEAD-A (SANITARY INSTALLATIONS)
-
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid
1
6350
6350.75
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
1
1849
1849.56
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm
1
4849
4849.77
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
7
401
2807
... More
Providing and fixing toilet paper holder : C.P. brass
1
561
561.18
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
1
1122
1122.75
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore
1
573
573.05
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
1
243
243.79
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineerin- charge.
2
722
1445.1
... More
Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore
7
78
551.95
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
1
77
77.82
... More
Providing and fixing CP brass shower set comprising of CP brass wall mixer, 115mm long bend, wall flange, spout, shower arm, shower rose complete including cutting and making good the wall etc. (Make:Jaquar Cat No.mixer- CON-273KNUPR, Arm-SHA-455L600, Rose-OHS-35495) For VIP Suite
1
11996
11996.6
... More
Supplying of wall mounting type towel rail 600mm long with CP brass screws (Make: Jaquar Model No. AQN-7711) For VIP Suite
1
2326
2326.11
... More
Providing and fixing Grab bar of 600mm long including accessories and fittings complete to the wall etc. (Jaquar Make:-AHS-1507) For Handicap Toilet
1
2199
2199.01
... More
SUB HEAD-B (SOIL, WASTE & VENT PIPES)
-
-
-
... More
Providing and fixing soil, waste and vent pipes :
-
-
-
... More
Hubless centrifugally cast (spun) iron pipes epoxy a) 100 mm dia coated inside & outside IS:15905
36
816
29392.56
... More
Hubless centrifugally cast (spun) iron pipes epoxy b) 75 mm diameter coated inside & outside IS:15905
8
673
5386.32
... More
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : For 100 mm dia pipe
5
253
1266.8
... More
Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 a) 100 mm dia
6
396
2376.3
... More
Providing and fixing plain bend of required degree. Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 a) 100 mm dia
18
256
4625.28
... More
Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe 100 mm dia SS 304 grade coupling with EPDM rubber gasket
84
301
25341.12
... More
Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905
3
596
1790.07
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 40 mm dia nominal bore
1.5
566
850.37
... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 40 mm dia nominal bore
1.5
566
850.37
... More
SUB HEAD-C (RAIN WATER PIPES)
-
-
-
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
2
208
416.5
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter
12
263
3162.24
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
... More
110 mm bend
9
104
944.82
... More
Shoe ( Plain) 110 mm bend
9
92
828.54
... More
SUB HEAD-D (WATER SUPPLY INTERNAL)
-
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal outer dia Pipes
6
280
1682.28
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
20 mm nominal outer dia Pipes
18
375
6756.84
... More
25 mm nominal outer dia Pipes
6
437
2627.88
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore
3
434
1303.77
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore
1
324
324.02
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
-
-
-
... More
20 mm dia nominal bore
22
305
6717.48
... More
25 mm dia nominal bore
22
385
8474.84
... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :
-
-
-
... More
20 mm diameter pipe
22
10
221.98
... More
25 mm diameter pipe
22
12
281.82
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
-
-
-
... More
20mm dia nominal bore
4
242
968.6
... More
25mm dia nominal bore
4
306
1226.84
... More
32mm dia nominal bore
4
341
1365.92
... More
40mm dia nominal bore
4
440
1763.24
... More
50mm dia nominal bore
4
575
2300.88
... More
GAZEBO
-
-
-
... More
Earth work in excavtion by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift as directed by Engineer-in-charge. All kinds of soil
29.16
123
3614.09
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
36.3
489
17755.06
... More
Providing and laying in Cement concrete 8:4:1 of not less than strength of stone ballast( 40 mm nominal size) 4 apprroved coarse sand :1 Cement and curing complete,including cost of form work in foundation and floors
8.07
4756
38384.79
... More
R.c.c. work with cement approved coarse sand and 2 cm. (3/4") guage approved stone ballast in the proportion 1:1.5:3,(1cement :1.5corse sand 3 grit) in foundation and footing excluding supply of reinforcement and its fixing and bending but including its fixing and binding the same necessary with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works.
-
-
-
... More
Same as item above but for footing
5.81
6316
36697.06
... More
Same as item above but for column
3.88
7578
29402.91
... More
Same as item above but for lighter beam
3.69
8033
29644.43
... More
Same as item above but for Slab
7.34
8033
58967.5
... More
Class 150 brick work in 1:6 cement and coarse sand of 2.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work.
17.1
4980
85159.54
... More
Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in anover all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
22.4
7530
168686.11
... More
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4)Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 5 liters/sqm (6) Treatment of soil apron along external perimeter 5 liter per SQM.
60.5
199
12069.75
... More
Providing and laying in situ five course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0 mm thick of 3.00 Kg/ sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 5th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately).
49.48
371
18381.82
... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick
17.6
375
6604.75
... More
12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)
19.8
242
4798.13
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
80.3
108
8749.49
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer
80.3
129
10409.29
... More
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :
-
-
-
... More
Bansi Paharpur - exposed face fine dressed with rough backing 30 mm thick
50.58
3418
172887.5
... More
Providing edge Sand Stone Moulding
134.4
128
17236.8
... More
Ornamantal Stone work for wall lining including pan patti design etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Bansi Paharpur - exposed face fine dressed with rough backing 40 mm thick
22.59
8365
188981.16
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent
60.5
3129
189308.74
... More
P/F Bansi Paharpur cladding as per approved sample over RCC Pillars in C M 1:3 as per approved design, patteren and drawing .finishing with flush pointing in white cement mixed with pigment to match the shade etc complete in all respect and as directed by engineer in charge
3.14
94793
297652.69
... More
Ornamantal Stone work for Arch design as per approved design with adhesive of pigment matching the stone shade :complete all carving work as per design and directed by engineer in charge Bansi Paharpur 40 mm thick
42
8365
351359.4
... More
Providing and Fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cememt mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.
405.88
498
202462.63
... More
Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases.
1738.22
30
53276.44
... More
ELECTRICAL WORK
-
-
-
... More
SUB-HEAD : INTERNAL WIRING
-
-
-
... More
Wiring for Light point / Fan point / Exhaust Fan point / Call Bell point with 1.5 sq.mm FRS PVC insulated copper conductor single core cable in surface / recessed steel. conduit , with modular switch ,modular plate ,suitable GI box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required. Group - C
6
1382
8297.52
... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C
18
820
14760.18
... More
Wiring for MCB controlled points with 2x2.5 sq. mm FRLS PVC insulated stranded copper conductor 1100 Volt grade wires in 25 mm dia steel conduit surface/concealed conduit including cost of providing saddles etc for surface conduiting and/or cost of cutting and filling chases for recessed conduiting and including the cost of running 1x 2.5 sq mm PVC insulated copper conductor wire for loop earthing etc. complete as per specifications and as required. (Cost of MCB included in the item for DB)
70
245
17157
... More
2 X 2.5 sq.mm +1 X 2.5 sq.mm earth wire
50
276
13829
... More
SUB-HEAD : ERRECTION OF FANS & LIGHT FIXTURES
-
-
-
... More
Supplying and fixing Circular C.I. Box for ceiling fan internal dia 140 mm, 73 mm height, toplid of 1.5mm thick MS sheet as required.
6
41
251.4
... More
Supplying and fixing two module stepped type electronic fan,regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
4
276
1106.32
... More
Installation, testing and commissioning of prewired flourescent fitting/compact flourescent fitting of all types complete with all accessories and tube etc directly on ceiling/wall including connections with 3x1.5 sq.mm FRLS PVC insulated copper conductor single core cable and earthing as required.
20
154
3088.2
... More
Installation, testing and commissioning of ceiling fans/bracket fan of all sizes including wiring the down rod .of standard length (up to 30 cm ) with 3x1.5 sq.mm FR PVC insulated copper conductor single core cable including providing and fixing phenolic laminated sheet cover on the fan box etc as required.
4
254
1016.4
... More
Earthing with G.I. earth pipe 4.5 metre long, 40 mm diaincluding accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/ coke and salt as required.
3
5138
15414.51
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
45
52
2361.15
... More
SUB-HEAD : DISTRIBUTION BOARD
-
-
-
... More
Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator
-
-
-
... More
6 way , Double door
3
1653
4960.53
... More
single pole
12
191
2302.56
... More
MEDITATION HALL
-
-
-
... More
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4)Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 5 liters/sqm (6) Treatment of soil apron along external perimeter 5 liter per SQM.
398.8
199
79559.6
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1743.08
108
189943.43
... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick
305.86
375
114778.96
... More
Providing and laying in situ five course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0 mm thick of 3.00 Kg/ sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 5th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately).
398.8
371
148152.34
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer
1589.59
129
206058.29
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
153.49
112
17212.59
... More
Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC from profile with homogenous fine cellular structure having smooth ouer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitalbe dia & length anchor fastener as per manufacture specification and irection of engineer in charge.
186.8
485
90781.06
... More
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
-
-
-
... More
Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)
46.4
5962
276679.49
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
46.76
2425
113409.86
... More
Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only
46.76
333
15604.95
... More
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Bansi Paharpur - exposed face fine dressed with rough backing . 30 mm thick
38.2
3418
130571.42
... More
Providing edge Sand Stone Moulding
418.2
128
53634.15
... More
Ornamantal Stone work for wall lining including pan patti design etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Bansi Paharpur - exposed face fine dressed with rough backing . 40 mm thick
45.37
8365
379551.81
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
84.76
1084
91939.17
... More
Providing and laying rectified Glazed CEREMIC FLOOR TILES of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
8.53
1005
8573.16
... More
Providing edge moulding to 30mm thick Granite stone in steps, including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge
32.55
342
11132.1
... More
Providing and Fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cememt mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.
3295.86
498
1644074.84
... More
Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases.
14115.04
30
432625.98
... More
ELECRTICAL WORK
-
-
-
... More
SUB-HEAD : INTERNAL WIRING
-
-
-
... More
Wiring for light / power plug point with FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit alongwith FRLS PVC insulated copper conductor single core cable for loop earthing as required. 2 X 1.5 sq.mm +1 X 1.5 sq.mm earth wire
20
245
4902
... More
Wiring for light / power plug point with 2 x 6 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit along with 1 No. 6 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
20.8
441
9182.78
... More
Wiring for light / power plug point with 4 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit along with 2 No. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
20
496
9924
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
1
357
357.54
... More
Wiring for circuit / submain wiring along with earth wire with the following sizesof FRLS PVC insulated copper conductor ,single core cable in surface / recessed steel conduit as required.
-
-
-
... More
2 X 2.5 sq.mm +1 X 2.5 sq.mm earth wire
270
245
66177
... More
2 X 4 sq.mm +1 X 4 sq.mm earth wire
220
320
70578.2
... More
4 X 2.5 sq.mm +2 X 2.5 sq.mm earth wire
30
419
12592.5
... More
4 X 10 sq.mm +2X 6 sq.mm earth wire
10
873
8739.8
... More
Supplying and fixing of following sizes of steel conduit along,with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
25 mm
5
191
959.4
... More
32 mm
5
244
1221.75
... More
40 mm
5
352
1761.45
... More
50 mm
5
437
2188.7
... More
SUB-HEAD : DISTRIBUTION BOARD
-
-
-
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4 + 24), Double door
1
7619
7619.18
... More
Supplying and fixing 5 amps. to 32 amps. rating, 240/415 V,10 KA,`C' series, Miniature circuit breaker (MCB) suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. single pole
32
191
6140.16
... More
Supplying, fixing, connecting, testing and commissioning of following rating, ISI marked (IS 8828) 240 / 415 volts, 10 KA, Miniature Circuit Breaker (MCB) of single / double / three / four poles in the existing MCB DB or in existing MS enclosure complete in all respects. 40 Amp. 3P MCB
1
920
920.45
... More
SUB-HEAD : SERVICES: TELEPHONE/TV/DATA
-
-
-
... More
Supplying, drawing, of 0.5sqm (4 pair) FR PVC insulated copper conductor, unarmoured telephone cable in existing surface/ recessed steel /PVC conduit as required
20
40
809.6
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 2 Pair telephone cord outlet (RJ-11)
1
334
334.3
... More
Supplying and fixing of following sizes of steel conduit along,with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 25 mm
50
191
9594
... More
PLUMBING WORK
-
-
-
... More
SUB HEAD-A (SANITARY INSTALLATIONS)
-
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
7
401
2807
... More
Providing and fixing toilet paper holder : C.P. brass
2
561
1122.36
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
2
243
487.58
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineerin- charge.
9
722
6502.95
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
3
77
233.46
... More
Providing and fixing CP brass shower set comprising of CP brass wall mixer, 115mm long bend, wall flange, spout, shower arm, shower rose complete including cutting and making good the wall etc. (Make:Jaquar Cat No.mixer- CON-273KNUPR, Arm-SHA-455L600, Rose-OHS-35495) For VIP Suite
3
11996
35989.8
... More
Supplying of wall mounting type towel rail 600mm long with CP brass screws (Make: Jaquar Model No. AQN-7711) For VIP Suite
2
2326
4652.22
... More
SUB HEAD-B (SOIL, WASTE & VENT PIPES)
-
-
-
... More
Providing and fixing soil, waste and vent pipes :
-
-
-
... More
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : For 100 mm dia pipe
5
253
1266.8
... More
Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe SS 304 grade coupling with EPDM rubber gasket 100 mm dia.
54
301
16290.72
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 40 mm dia nominal bore
12
566
6802.92
... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 40 mm dia nominal bore
12
17
211.56
... More
SUB HEAD-D (WATER SUPPLY INTERNAL)
-
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 32 mm nominal outer dia Pipes
8
362
2897.76
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32 mm nominal outer dia Pipes
10
516
5162.2
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
... More
32 mm nominal bore
4
481
1926.04
... More
40 mm nominal bore
1
576
576.82
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore
1
324
324.02
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
-
-
-
... More
20 mm dia nominal bore
10
305
3053.4
... More
25 mm dia nominal bore
10
385
3852.2
... More
32 mm dia nominal bore
4
465
1862.92
... More
40 mm dia nominal bore
15
566
8503.65
... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :
-
-
-
... More
20 mm diameter pipe
10
10
100.9
... More
25 mm diameter pipe
10
12
128.1
... More
32 mm diameter pipe
4
15
62
... More
40 mm diameter pipe
15
17
264.45
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
-
-
-
... More
20mm dia nominal bore
4
242
968.6
... More
25mm dia nominal bore
4
306
1226.84
... More
32mm dia nominal bore
4
341
1365.92
... More
40mm dia nominal bore
4
440
1763.24
... More
50mm dia nominal bore
4
575
2300.88
... More
INNER ROAD & PARKING
-
-
-
... More
Earth work in excavtion by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift as directed by Engineer-in-charge. All kinds of soil
48.87
123
6057.44
... More
Providing and laying in Cement concrete 8:4:1 of not less than strength of stone ballast( 40 mm nominal size) 4 apprroved coarse sand :1 Cement and curing complete,including cost of form work in foundation and floors
8.15
4756
38765.31
... More
Providing and laying Cement concrete 1:2:4 (1cement :2 coarse sand :4 graded stone ballast 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation.
29.11
5432
158142.69
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
355.86
152
54393.2
... More
Providing and fixing 100X100X100 MM Granite cobble (mix colour granite cobble as/detail) in approved finish for paving laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete as per direction of engineer-in-charge.
367.39
3040
1116865.6
... More
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
4.87
678
3305.27
... More
Providing and laying 30 mm thick, Khareda stone flooring over the paved & band area, laid over 20 mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including making groove, grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.
312.02
2299
717333.98
... More
Providing and laying 40 mm thick (Not less than) coping, khareda stone in treads of steps,toe wall & planters coping laid on 15-20 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
541.73
3146
1704502.42
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
2.45
7064
17308.29
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 kg/10 sqm)
50.26
112
5636.16
... More
R.c.c. work with cement approved coarse sand and 2 cm. (3/4") guage approved stone ballast in the proportion 1:1.5:3,(1cement :1.5corse sand 3 grit) in foundation and footing excluding supply of reinforcement and its fixing and bending but including its fixing and binding the same necessary with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Same as but for column
2.36
7578
17884.25
... More
FOOD COURT AREA
-
-
-
... More
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density .
138.73
731
101415.79
... More
Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
97.66
5724
559068.34
... More
Providing and laying Cement concrete 1:2:4 (1cement :2 coarse sand :4 graded stone ballast 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation.
90.95
5432
494094.06
... More
Providing and laying 30 mm thick, Khareda stone flooring over the paved & band area, laid over 20 mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including making groove, grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.
37.48
2299
86166.52
... More
Providing and laying 40 mm thick (Not less than) coping, khareda stone in treads of steps,toe wall & planters coping laid on 15-20 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
163.15
3146
513335.16
... More
Extra for pre finished nosing in sand stone slab
3195.56
128
409830.57
... More
Class 150 brick work in 1:6 cement and coarse sand of 2.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work.
20.33
4980
101245.23
... More
Providing edge moulding to 30mm thick Granite stone in steps, including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge
156.8
342
53625.6
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent
98.32
3129
307650.16
... More
OAT, STAGE & PATHWAY
-
-
-
... More
Extra for pre finished nosing in sand stone slab
2552.55
128
327364.54
... More
BOUNDARY WALL SIDE
-
-
-
... More
Earth work in excavtion by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift as directed by Engineer-in-charge.
14.91
123
1847.45
... More
Boring with hydraulic piling ring with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cape in M-25 cement concrete to carry a safe working load not less than specified excluing the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of pile to be embedded in pile cap etc all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap.) 300 mm Dia Piles
690
2140
1476986.4
... More
Providing and laying in cement concrete 1:4:8(1 cement :4 Coarse sand :8 graded Stone ballast 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.
1.8
4756
8566.42
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement ::1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size).
45.21
8033
363164.31
... More
As in item 3 above but in R.C.C. columns in 1:1.5:3 having strength not less than M-20.
19.98
7578
151409.84
... More
As in item 3 above but in R.C.C. footing in 1:1.5:3 having strength not less than M-20.
1.8
6316
11369.14
... More
Mild steel or iron in plain work such as reinforced concrete or reinforfced, brick work (when not including in anover all rates) wrought to required shape as necessary included bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
89.93
7530
677244.62
... More
Brick work in Foundation in 1:6 including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than 12 cms.
6.67
4980
33222.18
... More
Brick work in super structure in 1:6 super structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than 12 cms.
163.37
6524
1065925.56
... More
12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 4 fine sand
1313.55
242
318312.57
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 kg/10 sqm)
6334.77
112
710381
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
6334.77
108
690236.43
... More
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
1699.2
67
115324.7
... More
Providing and fixing 12 mm thick fire and water proof Polycorbonate sheet with 40x40x2 mm thick stainless steel grade of 304 square pipe and 25x12.50x2 mm thick stainless steel grade of 304 rectangular pipe beading, fixing with 10mm dia, 100 mm long anchor fastener , 1/8 no self steel screw of size 40 mm long, joint welding steel polish etc. complete as per requirement of proper completion of work and as per direction of Engineer in charge
32.4
19836
642686.4
... More
MISCELLANEOUS ITEMS
-
-
-
... More
Excavation in foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches or into the plinth and removal & disposal surplus earth as directed by the engineer I/C within a lead of 30 m.from foundation trenches.
2620.2
123
324747.71
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
51.03
489
24959.79
... More
Supplying and spreading 75mm thick bed of loose stone over 50mm thick bed of stone aggregate over Geotextile fabric
-
-
-
... More
River Pebbles size of 20mm to 50 mm dia
440.04
475
209020.9
... More
Grey Stone aggregates of nominal size 12-25mm
440.04
332
146314.63
... More
Crushed Red Stone aggregates of nominal size 12-25mm
440.04
427
188118.81
... More
Crushed White marble grit stone of nominal size 12-25mm
440.04
380
167216.72
... More
Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment,matching the stone shade, jali slab without any chamfers etc.
168.29
10425
1754614.4
... More
Providing and laying Cement concrete 1:2:4 (1cement :2 coarse sand :4 graded stone ballast 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation.
31.91
5432
173332.22
... More
Providing and laying Cement concrete 1:4:8 (1cement :4 coarse sand :8 graded stone ballast 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation.
33.86
4756
161035.39
... More
Class 150 brick work in 1:6 cement and coarse sand of 2.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work.
119.71
4980
596186.49
... More
R.c.c. work with cement approved coarse sand and 2 cm. (3/4") guage approved stone ballast in the proportion 1:1.5:3,(1cement :1.5corse sand 3 grit) in foundation and footing excluding supply of reinforcement and its fixing and bending but including its fixing and binding the same necessary with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. but for Slab (1:1.5:3)
39.88
8033
320408.85
... More
Providing and laying 30 mm thick, Khareda stone flooring over the paved & band area, laid over 20 mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including making groove, grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.
162.84
2299
374369.16
... More
Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in anover all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
31.31
7530
235768.96
... More
Providing and laying 40 mm thick (Not less than) coping, khareda stone in treads of steps,toe wall & planters coping laid on 15-20 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
11.32
3146
35604.66
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
1.83
7064
12921.17
... More
Extra for pre finished nosing in sand stone slab
40.83
128
5236.45
... More
BENCHES
25
9025
225625
... More
SEATING (FOOD COURT)
10
23750
237500
... More
SIGNAGES
-
-
-
... More
MAP SIGNAGE
1
47500
47500
... More
WAY FINDING SIIGNAGE
8
47500
380000
... More
ROCKERY
80
6650
532000
... More
OUTDOOR DUSTBIN WITH STAND
20
7433
148675
... More
LANDSCAPE
-
-
-
... More
Earth work in excavtion by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift as directed by Engineer-in-charge.
-
-
-
... More
All kinds of soil Extra for levelling & neatly dressing of disposed soil completely as directed by Engineer-in-charge
30423.45
188
5747293.94
... More
ART WORK
-
-
-
... More
Ram van gaman – leaving from Ayodhya Standing human sculpture – 6 nos – Ht. : 4’-00”
Walking human sculpture – 3 nos – Ht. : 7’-00”
1
1425000
1425000
... More
Ram van gaman – Ram, Sita & Laxman at forest Walking human sculpture – 3 nos – Ht. : 7’-00”
1
475000
475000
... More
Stay at Chitrakoot forest – Huts and lifestyle at forest Standing human sculpture – 1 nos – Ht. : 7’-00”
Sitting human sculpture – 3 nos – Ht. : 3’-00”
1
570000
570000
... More
INTERNAL & EXTERNAL ELECTRICAL WORK
-
-
-
... More
Wiring for Light point / Fan point / Exhaust Fan point / Call Bell point with 1.5 sq.mm FRS PVC insulated copper conductor single core cable in surface / recessed steel. conduit , with modular switch ,modular plate ,suitable GI box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required. Group - C
2
1382
2765.84
... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C
4
820
3280.04
... More
Wiring for MCB controlled points with 2x2.5 sq. mm FRLS PVC insulated stranded copper conductor 1100 Volt grade wires in 25 mm dia steel conduit surface/concealed conduit including cost of providing saddles etc for surface conduiting and/or cost of cutting and filling chases for recessed conduiting and including the cost of running 1x 2.5 sq mm PVC insulated copper conductor wire for loop earthing etc. complete as per specifications and as required. (Cost of MCB included in the item for DB)
110
276
30423.8
... More
Wiring for light / power plug point with 2 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit alongwith 1 No. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
30
332
9961.5
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess ,including providing and fixing 6 pin 15 / 16 & 5 / 6 amps modular socket outlet and 15 / 16 amps modular switch, connection, etc.as required.
2
439
878.48
... More
Wiring for circuit / submain wiring along with earth wire with the following sizesof FRLS PVC insulated copper conductor ,single core cable in surface / recessed steel conduit as required. 2 X 2.5 sq.mm +1 X 2.5 sq.mm earth wire
12
245
2941.2
... More
SUB-HEAD : ERRECTION OF FANS & LIGHT FIXTURES
-
-
-
... More
Installation, testing and commissioning of prewired flourescent fitting/compact flourescent fitting of all types complete with all accessories and tube etc directly on ceiling/wall including connections with 3x1.5 sq.mm FRLS PVC insulated copper conductor single core cable and earthing as required.
18
154
2779.38
... More
Installation of exhaust up to 450mm sweep & in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as required
2
492
984.9
... More
SUB-HEAD : EARTHING
-
-
-
... More
Earthing with G.I. earth pipe 4.5 metre long, 40 mm diaincluding accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/ coke and salt as required.
7
5138
35967.19
... More
SUB-HEAD : LIGHTNING PROTECTION
-
-
-
... More
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc complete as required.
1
388
388.27
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
160
94
15110.4
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)
25
147
3691.5
... More
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required
2
90
181.4
... More
Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.
25
146
3654
... More
SUB-HEAD : DISTRIBUTION BOARD
-
-
-
... More
Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator 6 way , Double door
3
1653
4960.53
... More
Supplying and fixing 5 amps. to 32 amps. rating, 240/415 V,10 KA,`C' series, Miniature circuit breaker (MCB) suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. single pole
12
191
2302.56
... More
SUB-HEAD : L.T CABLES
-
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required
-
-
-
... More
Upto 35 sq. mm
3357
290
973798.56
... More
Above 35 sq. mm and upto 95 sq. mm
900
303
273213
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC /HUME/ METAL pipe as required
-
-
-
... More
Upto 35 sq. mm
350
27
9705.5
... More
Above 35 sq. mm and upto 95 sq. mm
49
42
2093.28
... More
Above 95 sq. mm and upto 185 sq. mm
2
57
115.44
... More
Supplying and making end termination of following sizes with brass compression gland including providing and crimping solderless plugs/ferrules of sizes PVC insulated PVC sheathed aluminum conductor armoured cable 1.1 KV grade.
-
-
-
... More
3½ X 185 sq. mm (57mm)
2
655
1311.72
... More
3½ X 70 sq. mm (38mm)
4
350
1403.16
... More
4 X 25 sq. mm (28mm)
4
236
944.44
... More
4 X 16 sq. mm (28mm)
12
231
2779.32
... More
4 X 10 sq. mm (25mm)
6
201
1209.78
... More
2 X 10 sq. mm /4x6mm (19mm)/4x6sqmm
2
180
361.28
... More
2 X 6 sq. mm /4x6mm (19mm)/2x6sqmm
15
180
2709.6
... More
Wiring for circuit / submain wiring along with earth wire with the following sizesof FRLS PVC insulated copper conductor ,single core cable in surface / recessed medium class PVC conduit as required. 3 x 2.5 sq. mm
600
206
123678
... More
Supplying and making indoor cable end jointing with cast resin compound, including lugs and other jointing materials, for ollowing size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required 3C x 120sq.mm (indoor)
5
1988
9942.8
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required Upto 120 sq. mm
30
393
11805.3
... More
SUB-HEAD : SERVICES: TELEPHONE/TV/DATA
-
-
-
... More
Supplying, drawing, of 0.5sqm (4 pair) FR PVC insulated copper conductor, unarmoured telephone cable in existing surface/ recessed steel /PVC conduit as required
95
40
3845.6
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
80
35
2818.4
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
2 Pair telephone cord outlet (RJ-11)
4
334
1337.2
... More
TV antenna socket outlet
3
334
1002.9
... More
Supplying and fixing of following sizes of steel conduit along,with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 25 mm
100
191
19188
... More
SUB-HEAD : SUPPLY OF FANS & LIGHT FIXTURES
-
-
-
... More
Supply, testing of following type led Compact light fixtures, on wall/ Ceiling including all fixing accessories, etc complete as required. The led shall be complete with Low loss copper driver all prewired upto the terminal block. All fixtures shall be supplied with lamps.
-
-
-
... More
1 x 22w led -box type fixture make Philips - cat no- BN021C LED22 PSU -CW-ER
6
902
5412.3
... More
1x 10W led bulk head fixture - Philips - cat no-WT202W LED6S NW PSU SA2 PC
12
1570
18848.76
... More
Supply of heavy duty type exhaust fans of following size sweep with gravity louvers shutters including all accessories/installation materials required make HAVELS/USHA./POLYCAB 305 mm sweep 900 rpm
2
3412
6825.96
... More
SUB-HEAD : DISTRIBUTION BOARD
-
-
-
... More
Supplying and fixing following rating, four / two pole, 415 / 240 volts, Residual Current Device (RCBO) having earth leakage, over load and short circuit protection at the incomer of existing Distribution Boards or in seperate enclosure, having a sensivity current of 30/100 mA complete with connections, testing and commissioning etc. as required : 40/32 Amp DP RCBO (100 mA)
3
4448
13345.44
... More
SUB-HEAD : L.T CABLES
-
-
-
... More
Supplying of following 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification as required.
-
-
-
... More
3.5 core 185sq. mm
180
1347
242487
... More
3.5 core 70sq. mm
1205
584
704334.55
... More
4 core 25sq. mm.
230
182
42076.2
... More
4 core 16sq. mm.
1850
155
288452
... More
4 core 10sq. mm.
490
117
57432.9
... More
4 core 6sq. mm.
20
197
3946.8
... More
2 core 6sq. mm.
2010
197
396653.4
... More
SUB-HEAD : SERVICES : TELEPHONE/TV/DATA
-
-
-
... More
Providing, fixing, connecting and testing of following pair solderless telephonetag block, with powder coated box (Krone make ) of required size box with hinged lockable cover and clamps for dressing of wires etc as required.( hensel make ) 10Pairs
2
2864
5728.38
... More
Providing, laying, connecting, testing & commissioning of multi-core telephone Armoured cables of conductor size 0.5 mm. PVC insulated & PVC sheathed with G.I strip armouring,genrallay confg. to ITD specifications S/WS-113C & S/WS-114.Armouring & Outer sheath conforming to IS:554 (part-1) to be laid in existing conduit/pipe/cable tray as required complete in all respects. 10 pair
375
175
65655
... More
2No. cable termination BOX to receive 11 kV XLPE cable 3 core 120sq mm.
1
788238
788238.75
... More
Supply & Erracetion factory fabricated & wired metal clad dust and vermirproof floor mounting M.S channel base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with therml magnatics release)Swithes Complete and instrumentchamber etc. completeinall respects. The instrumentchamber shall be separate and shall comprise of flush type digitalmeteringsystem for phase to phase voltage and singlephase voltage, current and other parameters(K V A, P.F, K W etc) in each phase with touch type selector switches for different reading, instrumentfuses,currenttranformer etc.The panel board shall have suitable capacityelectrolyite alumininumbusbars as per IS8623 or above istulated with heat shrinksleeving and mounted on non hygroscopisupports suchas CMC/BMC supports with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitablecable end boxes, compressionglands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-charge. All out goings of 100Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of1.6mm/2mm.Cubicletype switch board shall be of cat A & B Only.
-
-
-
... More
Incoming
-
-
-
... More
100 Amp MCCB-2 Nos
-
-
-
... More
Outgoning
-
-
-
... More
63 Amp. MCCB-1 No & 32 Amp. MCCB-2 Nos
-
-
-
... More
Cat. B Pannel Cubicle Type
3
104445
313337.55
... More
Incoming
-
-
-
... More
200 Amp. MCCB-1 No & 32 Amp. MCCB-2 Nos
-
-
-
... More
Outgoning
-
-
-
... More
63 Amp. MCCB-3 No
-
-
-
... More
Cat. B Pannel Cubicle Type
2
119415
238830
... More
Incoming
-
-
-
... More
400 Amp. MCCB-1 Nos
-
-
-
... More
Outgoning
-
-
-
... More
200 Amp. MCCB-1 No & 100 Amp. MCCB-2 Nos & 63 Amp. MCCB-1 No
-
-
-
... More
Cat. B Pannel Cubicle Type
1
184718
184718.95
... More
Package Substation
-
-
-
... More
Package substation will have the following equipments:
-
-
-
... More
Transformer:-
-
-
-
... More
3 No. 32 Amp, 25KA, TP with neutral liink MCCB complete with thermal magnetic release having overcurrent, short circuit protection
1
2009287
2009287.27
... More
SUB-HEAD : H.T.CABLE, CONTROL CABLE
-
-
-
... More
Supplying of 3 core undernoted size of Aluminium conductor XLPE 11 KV (E) cable per Technical specifications as required. 3C x 120 sq.mm
60
1053
63207.6
... More
Sub head : ---External & Landscape Lightings
-
-
-
... More
SITC of adjustable street light luminaire 3000K Housing and front frame made of pressure die-cast aluminium featuring high strength and anti corrosion. The front frame of the luminaire should be hinged for easy open and ease of maintenance. Should have provision for NEMA socket on the top for future upgradation. Suitable for mounting on to Ø60 pipe at -15° to +°15 lateral (side entry) and vertical (top mount). Led compartment should be covered with Clear tempered glass. High quality light transmittance lens must be used. should have minimum dimension of 738 x 289 x 114 mm. Power consumption should be between 120-125W at steady state full intensity luminaire, the luminous flux of the luminaire is upto 14400 lm for 4000K Distribution- Asymetrical Batwing street light optics T-III/T-IV. The ingress protection is IP65/66 or higher and impact resistance of IK08. This luminaire contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire 60,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency 85%, power factor 0.9, THD 10%, Surge protection 6KV.Driver operating voltage of 100-277Vac.Adequate heat sink with proper thermal management shall be provided. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory will be submitted post the issuance of LOA to the successful bidder and before the supply of material. Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA/CITIZEN. CE & BIS Certified. Make: K-Lite/Unilamp/ACDC/Thorn/Vulkan
12
30685
368220
... More
SITC of pole with 9 mtr height, Made of Hot rolled steel flat x 3mm thick. All pole sections are welded using Submerged arc welding technique by certified welders by using automatic machine with pricised welding. Built-in control box with cast aluminium service door and safety rope. Die cast aluminium door is contoured to the shape of the pole with silicone rubber gasket. The control gear tray is prewired with MCB, terminal connectors for loop-in / loop-out arrangement. The foundation bolt holes in the base plate are designed to be elongated for fine adjustments / alignment of the pole during installation. Base plate made of steel grade E250 & foundation bolt of grade 4.6 . The pole shall be Power Coated/PU Coated/ Galvanised. The Pole shall be provided with Graphite grey / Anthracite grey / Black as standard colour options.
12
17100
205200
... More
SITC of decorative post top light made up Spun aluminium top cover Ø400 mm of 1.6mm thickness, die cast aluminium decorative knob on top, Mild steel ( Sand Blasting with zinc primer supporting arm integrated with die-cast aluminium base suitable for mounting Ø76mm OD pipe. SS fasteners. Luminaire should be given Acid treatment & then coated with pure polyester powder coating for long lasting paint. Should have minimum Dimension of Ø400 x 807mm, Clear acrylic diffuser with controlled downward light emission. Lamp at fixed position. Power consumption should be between 40W to 50W at steady state full intensity luminaire, the minimum luminous flux of the luminaire should be 3400 lm for 3000K with 360° symetric distribution. The ingress protection is IP65 and impact resistance of IK06. The luminaire should be integrated with high power module with CRI≥80, SDCM≤3. This luminaire contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire 56,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency 88%, power factor 0.96, THD 10%, Surge protection 6KV. The driver input voltage 240Vac at 50-60Hz, operating voltage of 100-277Vac.Adequate heat sink with proper thermal management shall be provided. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory will be submitted post the issuance of LOA to the successful bidder and before the supply of material. Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA/CITIZEN. CE & BIS Certified. Make: K-Lite/Unilamp/ACDC/Thorn/Vulkan
34
23085
784890
... More
SITC of pole with 4.2 mtr height, Made of Steel x 3mm thick. All pole sections are welded using Submerged arc welding technique by certified welders by using automatic machine with pricised welding. Built-in control box with cast aluminium service door and safety rope. Die cast aluminium door is contoured to the shape of the pole with silicone rubber gasket. The control gear tray is prewired with MCB, terminal connectors for loop-in / loop-out arrangement. The foundation bolt holes in the base plate are designed to be elongated for fine adjustments / alignment of the pole during installation. Base plate made of steel grade E250 & foundation bolt of grade 4.6 . The pole shall be Power Coated/PU Coated/ Galvanised. The Pole shall be provided with Graphite grey / Anthracite grey / Black as standard colour options.
36
14250
513000
... More
SITC of decorative post top light made up Spun aluminium top cover Ø400 mm of 1.6mm thickness, die cast aluminium decorative knob on top, Mild steel ( Sand Blasting with zinc primer supporting arm integrated with die-cast aluminium base suitable for mounting Ø76mm OD pipe. SS fasteners. Luminaire should be given Acid treatment & then coated with pure polyester powder coating for long lasting paint. Should have minimum Dimension of Ø400 x 807mm, Clear acrylic diffuser with controlled downward light emission. Lamp at fixed position. Power consumption should be between 30W to 35W at steady state full intensity luminaire, the minimum luminous flux of the luminaire should be 3400 lm for 3000K with 360° symetric distribution. The ingress protection is IP65 and impact resistance of IK06. The luminaire should be integrated with high power module with CRI≥80, SDCM≤3. This luminaire contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire 56,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency 88%, power factor 0.96, THD 10%, Surge protection 6KV. The driver input voltage 240Vac at 50-60Hz, operating voltage of 100-277Vac.Adequate heat sink with proper thermal management shall be provided. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory will be submitted post the issuance of LOA to the successful bidder and before the supply of material. Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA/CITIZEN. CE & BIS Certified. Make: K-Lite/Unilamp/ACDC/Thorn/Vulkan.
77
19617
1510547.5
... More
SITC of pole with 4.2 mtr height, Made of Steel x 3mm thick. All pole sections are welded using Submerged arc welding technique by certified welders by using automatic machine with pricised welding. Built-in control box with cast aluminium service door and safety rope. Die cast aluminium door is contoured to the shape of the pole with silicone rubber gasket. The control gear tray is prewired with MCB, terminal connectors for loop-in / loop-out arrangement. The foundation bolt holes in the base plate are designed to be elongated for fine adjustments / alignment of the pole during installation. Base plate made of steel grade E250 & foundation bolt of grade 4.6 . The pole shall be Power Coated/PU Coated/ Galvanised. The Pole shall be provided with Graphite grey / Anthracite grey / Black as standard colour options.
77
14250
1097250
... More
Supply installation testing & commissioning of bollard light made up of Extruded aluminum bottom pipe (grade 6063 with test certificate) Ø166 x 3mm thickness & die-cast aluminum top cover, SS fasteners. Pre treated silicone gaskets. Die-cast aluminum mounting plate Ø167 x 4mm thick with 4 elongated holes 20 x 14 to suit M12 bolts at PCD 110 with pure polyester powder coating. This mounting plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. Hot dip galvanized foundation bolt. Should have minimum Dimension of Ø166 x 975mm, Clear polycarbonate diffuser with controlled downward light emission. Lamp at fixed position. Power consumption should be between 14W to 16W at steady state full intensity luminaire, the minimum luminous flux of the luminaire should be 900 lm for 3000K with 360° symmetric distribution. This luminaire contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire 60,000 hours at 40°C. Operating ambient temperature range is from -15°C o +50°C. Driver efficiency 87%, power factor 0.95, THD 8.2%, Surge protection 3KV. The ingress protection is IP65 and impact resistance of IK08. The driver input voltage 240Vac at 50-60Hz, operating voltage of 100-277Vac. Adequate heat sink with proper thermal management shall be provided. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory will be submitted post the issuance of LOA to the successful bidder and before the supply of material. Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA/CITIZEN. CE & BIS Certified. Make: K-Lite/Unilamp/Targetti.
16
16482
263720
... More
SITC of Static White 3000K Spike mounted compact spot light designed to provide directional light. Beam angle 15° / 25° / 40°. Luminaire made of pressure die cast aluminium alloy of high corrosion resistance and non corrosive A2 stainless steel fasteners. Clear toughened glass of 4mm thickness. Hybrid optics with lens & mirror finish pure aluminium reflector combination for higher efficiency, lower optical losses with optimum glare suppression.Power consumption should be between 12W to 14W at steady state full intensity luminaire should have minimum luminous flux of 1087 Lm. Color rendering index CRI ≥ 80 and power factor of complete luminaire ≥ 0.90, at white colour. Swivel range of 0° - 90°. Single cable entrance M10 cable gland. Protection class IP66. Mechanical resistance IK06. Pure polyester powder coated graphite grey / anthracite grey / jet black. Available colour temperature 3000K / 4000K, Colour rendering index (CRI)80. SDCM-3 MacAdam. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Luminaire dimension : 113mm length x 73mm Dia x 451mm height.Adequate heat sink with proper thermal management shall be provided. Operating Temperature : -10°C to +50°C, Operating Humidity : 10%-90%. THD should be less than 10%.. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory will be submitted post the issuance of LOA to the successful bidder and before the supply of material. Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA//CITIZEN. CE & BIS Certified. Make: K-Lite/Unilamp/ACDC.
2
6982
13965
... More
SITC of Static White 3000K Spike mounted compact spot light designed to provide directional light. Beam angle 15° / 25° / 40°. Luminaire made of pressure die cast aluminium alloy of high corrosion resistance and non corrosive A2 stainless steel fasteners. Clear toughened glass of 4mm thickness. Hybrid optics with lens & mirror finish pure aluminium reflector combination for higher efficiency, lower optical losses with optimum glare suppression.Power consumption should be between 18W to 20W at steady state full intensity luminaire should have minimum luminous flux of 1760 Lm. Color rendering index CRI ≥ 80 and power factor of complete luminaire ≥ 0.90, at white colour. Swivel range of 0° - 90°. Single cable entrance M10 cable gland. Protection class IP66. Mechanical resistance IK06. Pure polyester powder coated graphite grey / anthracite grey / jet black. Available colour temperature 3000K / 4000K, Colour rendering index (CRI)80. SDCM-3 MacAdam. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Luminaire dimension : 160mm length x 100mm Dia x 494mm height.Adequate heat sink with proper thermal management shall be provided. Operating Temperature : -10°C to +50°C, Operating Humidity : 10%-90%. THD should be less than 10%.. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory will be submitted post the issuance of LOA to the successful bidder and before the supply of material. Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA//CITIZEN. CE & BIS Certified. Make: K-Lite/Unilamp/ACDC.
32
10592
338960
... More
SITC of Static White 3000K Spike mounted compact spot light designed to provide directional light. Beam angle 15° / 25° / 40°. Luminaire made of pressure die cast aluminium alloy of high corrosion resistance and non corrosive A2 stainless steel fasteners. Clear toughened glass of 4mm thickness. Hybrid optics with lens & mirror finish pure aluminium reflector combination for higher efficiency, lower optical losses with optimum glare suppression.Power consumption should be between 18W to 20W at steady state full intensity luminaire should have minimum luminous flux of 1760 Lm. Color rendering index CRI ≥ 80 and power factor of complete luminaire ≥ 0.90, at white colour. Swivel range of 0° - 90°. Single cable entrance M10 cable gland. Protection class IP66. Mechanical resistance IK06. Pure polyester powder coated graphite grey / anthracite grey / jet black. Available colour temperature 3000K / 4000K, Colour rendering index (CRI)80. SDCM-3 MacAdam. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Luminaire dimension : 160mm length x 100mm Dia x 154mm height.Adequate heat sink with proper thermal management shall be provided. Operating Temperature : -10°C to +50°C, Operating Humidity : 10%-90%. THD should be less than 10%.. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory will be submitted post the issuance of LOA to the successful bidder and before the supply of material. Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA//CITIZEN. CE & BIS Certified. Make: K-Lite/Unilamp/ACDC.
50
10592
529625
... More
SITC of Static White 3000K surface mounted compact spot light designed to provide directional light. Beam angle 15° / 25° / 40°. Luminaire made of pressure die cast aluminium alloy of high corrosion resistance and non corrosive A2 stainless steel fasteners. Clear toughened glass of 4mm thickness. Hybrid optics with lens & mirror finish pure aluminium reflector combination for higher efficiency, lower optical losses with optimum glare suppression.Power consumption should be between 12W to 14W at steady state full intensity luminaire should have minimum luminous flux of 1087 Lm. Color rendering index CRI ≥ 80 and power factor of complete luminaire ≥ 0.90, at white colour. Swivel range of 0° - 90°. Single cable entrance M10 cable gland. Protection class IP66. Mechanical resistance IK06. Pure polyester powder coated graphite grey / anthracite grey / jet black. Available colour temperature 3000K / 4000K, Colour rendering index (CRI)80. SDCM-3 MacAdam. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Luminaire dimension : 113mm length x 73mm Dia x 117mm height.Adequate heat sink with proper thermal management shall be provided. Operating Temperature : -10°C to +50°C, Operating Humidity : 10%-90%. THD should be less than 10%.. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory will be submitted post the issuance of LOA to the successful bidder and before the supply of material. Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA//CITIZEN. CE & BIS Certified. Make: K-Lite/Unilamp/ACDC.
53
10592
561402.5
... More
SITC of Static White 3000K 20W In-ground with in built honey comb louvre symmetrical luminaire made up of die-casting with Ø157 x 220mm,the Ø173 front ring should be made up of stainless steel 316 grade front ring with silicone black gasket and toughened clear glass diffuser. The luminous flux of the luminaire is upto 375 lm for 3000K BEAM - 15°/25°/40. The ingress protection is IP67 and impact resistance of IK08. The luminaire is integrated with high power CITIZEN COB with CRI≥80, SDCM≤3, L70/ B10 @ 60000 Hrs. The integral constant current driver comes with the power factor greater than or equal to 0.9, total harmonic distortion less than 15% with operating efficiency greater than 80% and a surge protection of 2KV. The driver input voltage 240Vac at 50-60Hz, operating voltage of 100-277Vac and operating temperature of -20˚ ~ +40˚C.Adequate heat sink with proper thermal management shall be provided. Operating Humidity : 10%-90%. THD should be less than 10%. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory will be submitted post the issuance of LOA to the successful bidder and before the supply of material. Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA/CITIZEN. CE & BIS Certified. Make: K-Lite/Unilamp/Linea Light/ Thorn/ACDC.
16
25650
410400
... More
SITC of Static White 3000K 12W to 14W In-ground with in built honey comb louvre symmetrical luminaire made up of die-casting with Ø157 x 220mm,the Ø173 front ring should be made up of stainless steel 316 grade front ring with silicone black gasket and toughened clear glass diffuser. The luminous flux of the luminaire is upto 375 lm for 3000K BEAM - 15°/25°/40. The ingress protection is IP67 and impact resistance of IK08. The luminaire is integrated with high power CITIZEN COB with CRI≥80, SDCM≤3, L70/ B10 @ 60000 Hrs. The integral constant current driver comes with the power factor greater than or equal to 0.9, total harmonic distortion less than 15% with operating efficiency greater than 80% and a surge protection of 2KV. The driver input voltage 240Vac at 50-60Hz, operating voltage of 100-277Vac and operating temperature of -20˚ ~ +40˚C.Adequate heat sink with proper thermal management shall be provided. Operating Humidity : 10%-90%. THD should be less than 10%. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory will be submitted post the issuance of LOA to the successful bidder and before the supply of material. Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA/CITIZEN. CE & BIS Certified. Make: K-Lite/Unilamp/Linea Light/ Thorn/ACDC.
12
25175
302100
... More
SITC of Static White 3000K 25W to 30W In-ground with in built honey comb louvre symmetrical luminaire made up of die-casting with Ø157 x 220mm,the Ø173 front ring should be made up of stainless steel 316 grade front ring with silicone black gasket and toughened clear glass diffuser. The luminous flux of the luminaire is upto 375 lm for 3000K BEAM - 15°/25°/40. The ingress protection is IP67 and impact resistance of IK08. The luminaire is integrated with high power CITIZEN COB with CRI≥80, SDCM≤3, L70/ B10 @ 60000 Hrs. The integral constant current driver comes with the power factor greater than or equal to 0.9, total harmonic distortion less than 15% with operating efficiency greater than 80% and a surge protection of 2KV. The driver input voltage 240Vac at 50-60Hz, operating voltage of 100-277Vac and operating temperature of -20˚ ~ +40˚C.Adequate heat sink with proper thermal management shall be provided. Operating Humidity : 10%-90%. THD should be less than 10%. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory will be submitted post the issuance of LOA to the successful bidder and before the supply of material. Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA/CITIZEN. CE & BIS Certified. Make: K-Lite/Unilamp/Linea Light/ Thorn/ACDC.
23
37240
856520
... More
SITC of Static White 3000K, Should be rectangular compact and robust wall recessed luminaires for illuminating walls and stairs. Must be forward asymmetrical light distribution. Luminaire made of pressure die cast aluminium alloy of high corrosion resistance and non corrosive A2 stainless steel fasteners. ABS plastic installation housing for preparing the recess opening in wall / stairs. Clear acrylic diffuser. Single cable entrance via M10 cable gland. Protection class at least IP65 or higher. Mechanical resistance IK09. Pure polyester powder coated graphite grey / anthracite grey / jet black.Power consumption should be between 10W to 12W at steady state full intensity luminaire should have minimum luminous flux of 600 Lm, should be available in different colour temperature 3000K / 4000K / 5700K, Colour rendering index (CRI)80. SDCM-3 MacAdam. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Luminaire dimension : 255mm length x 87mm width x 76mm height. Luminaire installation in a recessed opening cut-out dimension : 240mm length x 83mm width x 70mm height. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory will be submitted post the issuance of LOA to the successful bidder and before the supply of material. Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA/CITIZEN. CE & BIS Certified. Make: K-Lite/Unilamp/Linea Light /ACDC/Thorn.
136
5985
813960
... More
SITC of Static White 3000K, Should be rectangular compact and robust wall recessed luminaires for illuminating walls and stairs. Must be forward asymmetrical light distribution. Luminaire made of pressure die cast aluminium alloy of high corrosion resistance and non corrosive A2 stainless steel fasteners. ABS plastic installation housing for preparing the recess opening in wall / stairs. Clear acrylic diffuser. Single cable entrance via M10 cable gland. Protection class at least IP65 or higher. Mechanical resistance IK09. Pure polyester powder coated graphite grey / anthracite grey / jet black.Power consumption should be between 10W to 12W at steady state full intensity luminaire should have minimum luminous flux of 600 Lm, should be available in different colour temperature 3000K / 4000K / 5700K, Colour rendering index (CRI)80. SDCM-3 MacAdam. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Luminaire dimension : 255mm length x 87mm width x 76mm height. Luminaire installation in a recessed opening cut-out dimension : 240mm length x 83mm width x 70mm height. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory will be submitted post the issuance of LOA to the successful bidder and before the supply of material. Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA/CITIZEN. CE & BIS Certified. Make: K-Lite/Unilamp/Linea Light /ACDC/Thorn
108
5985
646380
... More
SITC of Static White 3000K surface mounted compact flood light designed to provide directional light. Beam angle 10° / 15° / 30°/60°. Luminaire made of Aluminum housing and non corrosive stainless steel fasteners. Tempered glass cover.Power consumption should be between 150W to 95W at steady state full intensity luminaire should have minimum luminous flux of 12000 Lm. Color rendering index CRI ≥ 80 and power factor of complete luminaire ≥ 0.90, at white colour. Swivel range of 0° - 90°. Single cable entrance cable gland. Protection class IP66. Mechanical resistance IK08. Pure polyester powder coated graphite grey / anthracite grey / jet black. Available colour temperature 3000K / 3000K, Colour rendering index (CRI)80. SDCM-3 MacAdam. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Luminaire dimension : 426mm length x 348mm Dia x 327mm height.Adequate heat sink with proper thermal management shall be provided. Operating Temperature : -20°C to +50°C, THD should be less than 20%.. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory will be submitted post the issuance of LOA to the successful bidder and before the supply of material. Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA//CITIZEN. CE & BIS Certified. Make: Traxon/Unilamp/Griven/Vulkan
11
118750
1306250
... More
SITC of Static White 3000K surface mounted compact flood light designed to provide directional light. Beam angle 10° / 15° / 30°/60°. Luminaire made of Aluminum housing and non corrosive stainless steel fasteners. Tempered glass cover.Power consumption should be between 90W to 95W at steady state full intensity luminaire should have minimum luminous flux of 7200 Lm. Color rendering index CRI ≥ 80 and power factor of complete luminaire ≥ 0.90, at white colour. Swivel range of 0° - 90°. Single cable entrance cable gland. Protection class IP66. Mechanical resistance IK08. Pure polyester powder coated graphite grey / anthracite grey / jet black. Available colour temperature 3000K / 3000K, Colour rendering index (CRI)80. SDCM-3 MacAdam. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Luminaire dimension : 349mm length x 275mm Dia x 322mm height.Adequate heat sink with proper thermal management shall be provided. Operating Temperature : -20°C to +50°C, THD should be less than 20%.. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory will be submitted post the issuance of LOA to the successful bidder and before the supply of material. Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA//CITIZEN. CE & BIS Certified. Make: Traxon/Unilamp/Griven/Vulkan
16
79800
1276800
... More
SITC of Static White 3000K Spike mounted compact spot light designed to provide directional light. Beam angle 15° / 25° / 40°. Luminaire made of pressure die cast aluminium alloy of high corrosion resistance and non corrosive A2 stainless steel fasteners. Clear toughened glass of 4mm thickness. Hybrid optics with lens & mirror finish pure aluminium reflector combination for higher efficiency, lower optical losses with optimum glare suppression.Power consumption should be between 12W to 14W at steady state full intensity luminaire should have minimum luminous flux of 1087 Lm. Color rendering index CRI ≥ 80 and power factor of complete luminaire ≥ 0.90, at white colour. Swivel range of 0° - 90°. Single cable entrance M10 cable gland. Protection class IP66. Mechanical resistance IK06. Pure polyester powder coated graphite grey / anthracite grey / jet black. Available colour temperature 3000K / 4000K, Colour rendering index (CRI)80. SDCM-3 MacAdam. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Luminaire dimension : 113mm length x 73mm Dia x 451mm height.Adequate heat sink with proper thermal management shall be provided. Operating Temperature : -10°C to +50°C, Operating Humidity : 10%-90%. THD should be less than 10%.. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory will be submitted post the issuance of LOA to the successful bidder and before the supply of material. Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA//CITIZEN. CE & BIS Certified. Make: K-Lite/Unilamp/ACDC
3
6982
20947.5
... More
"SITC of flexible LED strip with Aluminium profile without resin; 12W/m at 3000K colour temperature with 120° beam angle light distribution; operating on 24V DC; CRI 80; IP65 rating ; remote LED driver on/off.
MAKE : K Lite/ Linea Light / Lamp.
725
1520
1102000
... More
SITC of Static White 3000K Suspended light . Beam angle Symmetrical. Luminaire made of cold rolled close anneal (CRCA) Opal High Transmission Mounting : Suitable for mounting to internally threaded pipe of designation :M30 . .Power consumption should be between 30W at steady state full intensity Source should have minimum luminous flux of 4500 Lm. Color rendering index CRI ≥ 80 and power factor of complete luminaire ≥ 0.90, at white colour. Protection class IP54. Pure polyester powder coated graphite grey / anthracite grey / jet black. Available colour temperature 3000K / 4000K, Colour rendering index (CRI)80. SDCM-3 MacAdam. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Luminaire dimension : 200Dia x 300mm height.Adequate heat sink with proper thermal management shall be provided. Operating Temperature : -10°C to +50°C, Operating Humidity : 10%-90%. THD should be less than 10%.. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory will be submitted post the issuance of LOA to the successful bidder and before the supply of material. Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA//CITIZEN. CE & BIS Certified. Make: K-Lite/Unilamp/Vulkan/Thorn.
5
14915
74575
... More
Supply installation testing & commisioning of Static White 3000K facade flood light luminaire made up : Die-Cast Aluminium cover should have minimum Dimension of 235 x 250 x 40mm, Power consumption should be between 50W to 60W at steady state full intensity luminaire, the luminous flux of the luminaire is upto 4399 lm for 3000K BEAM - 120. The ingress protection is IP65 and impact resistance of IK06. The luminaire is integrated with high power module with CRI≥80, SDCM≤3. The luminaire should contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire L70B10 84,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency 90%, Power factor 0.95, THD 7.8%, Surge protection 6KV. The driver input voltage 240Vac at 50-60Hz, operating voltage of 100-277Vac.Adequate heat sink with proper thermal management shall be provided. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory will be submitted post the issuance of LOA to the successful bidder and before the supply of material. Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA/CITIZEN. CE & BIS Certified. Make: K-Lite/Unilamp/Linea LIght/Thorn.
17
3752
63792.5
... More
SCHEDULE OF QUANTITES FOR SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF D.G SETS FOR - NISHANT RAJ PARK
-
-
-
... More
Back up-power of -DG-Set
-
-
-
... More
Supply of silent type DG sets of
-
-
-
... More
Supply, installation ,testing , commisoning of of 125KVA SILENT Diesel Generator set radiator cooled type suitable for of 415V, 3 phase 4 wire, 0.8 pf. (lagging) 50c/s A.C supply complete with engine (1500 RPM) and alternator DG Set controller with accessories including residential type silencer,and SS bellow for DG set and fuel service tank (internal) 290 liters capacity, battery and battery charger with all associated accessories, including standard set of tools and anti-vibration mounting pads, MCCB. Regulator through inbuilt AVR, digital governing + protective function. DG Must have these Equipment & Functio
1
1113039
1113039.08
... More
Supply installation ,testing , commisoning of 990 Litre fuel tank made of MS plate 3 mm thickness with provision of manhole, in/out sockets, drain out plugs including supply/return pipe etc. as required at site.
1
87526
87526.29
... More
Supplying and fixing of under noted 'B' class M.S. pipe for D.G. exhaust complete with bends, elbow, flanges etc. as required.
-
-
-
... More
100 mm dia pipe-4.85 mm thickness
10
2381
23814.1
... More
Supply installation ,testing , commisoning of 50mm thick compressed mineral wool insulation for D.G. exhaust pipe with 26 gauge aluminium sheet cladding etc. as required for the under mentioned dia pipe.
-
-
-
... More
100 mm dia pipe-4.85 mm thickness
10
917
9171.3
... More
Residential silencer for 12/KVA D.G set insulation
1
7417
7417.4
... More
SEWERAGE SYSTEM
-
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
-
-
-
... More
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.
13.5
245
3319.52
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 250 mm dia. R.C.C. pipe
13.5
628
8481.92
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of RCC pipes including bed concrete as per standard design 250 mm dia. R.C.C. pipe
13.5
710
9585.68
... More
1.68 m deep with SFRC Cover and frame (heavy duty HD 20 grade designation) 560 mm internal diameter conform ing to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 ce ment : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :
-
-
-
... More
With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
1
17248
17248.7
... More
Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m :
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
6885
13771.52
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
7
386
2706.34
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150 x 100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
9
1909
17182.44
... More
STORM WATER SYSTEM
-
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.
358
245
88028.62
... More
Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 metre).
-
-
-
... More
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.
18
312
5625.9
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
725.33
136
99269.07
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
... More
250 mm dia. R.C.C. pipe
810
628
508914.9
... More
300 mm dia. R.C.C. pipe
13
694
9025.51
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of hume . pipes including bed concrete as per standard design :
-
-
-
... More
250 mm dia. hume pipe
810
710
575140.5
... More
300 mm dia. hume . pipe
13
819
10650.77
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
26
8917
231843.04
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
6162
24649.36
... More
Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :
-
-
-
... More
0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) :
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
21
8885
186589.83
... More
Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
11
5300
58310.67
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
228
386
88149.36
... More
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
25
4160
104002.5
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
420
1054
442772.4
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction
of Engineer-in-charge.
420
1074
451113.6
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in charge.
315
1074
338335.2
... More
WATER SUPPLY SYSTEM
-
-
-
... More
Providing and fixing G.I. pipes complete with G.I. fittings including, trenching and refilling etc.
-
-
-
... More
external works
-
-
-
... More
25 mm dia nominal bore
95
326
31027.95
... More
32 mm dia nominal bore
115
377
43384.9
... More
40 mm dia nominal bore
140
430
60320.4
... More
50 mm dia nominal bore
15
532
7982.55
... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :
-
-
-
... More
25 mm dia nominal bore
95
12
1216.95
... More
32 mm dia nominal bore
115
15
1782.5
... More
40 mm dia nominal bore
140
17
2468.2
... More
50 mm dia nominal bore
15
21
319.5
... More
Providing and filling sand of grading zone V or coarser grade all-round the G.I. pipes in external work.
-
-
-
... More
25 mm dia nominal bore
95
112
10659.95
... More
32 mm dia nominal bore
115
115
13241.1
... More
40 mm dia nominal bore
140
116
16325.4
... More
50 mm dia nominal bore
15
120
1814.55
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality
-
-
-
... More
(screwed end) :
-
-
-
... More
25mm nominal bore
7
434
3042.13
... More
32mm nominal bore
2
481
963.02
... More
40mm nominal bore
1
576
576.82
... More
50mm nominal bore
-
-
-
... More
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
10
7584
75846.7
... More
WATER SUPPLY PUMPS & EQUIPMENTS WORK
-
-
-
... More
Domestic/Flushing Water Pump (Hydropneumatic System With Variable Speed Pumps)
-
-
-
... More
Providing, fixing and testing of skid mounted variables frequency drive hydropneumatic system with variable speed system comprising of :-
-
-
-
... More
Vertical, inline multistage centrifugal pumping set with stainless steel SS-304 stage casing and SS-304 impellers with stainless steel SS-316L shaft as per IEC standards and GJL250 cast i.ron suction & discharge casing, connected to TEFC ventilated induction motor of 2 pole, 2900rpm, suitable for 400/440 Volts, 3 phase, 50 Hz A.C. supply.
-
-
-
... More
Pressure vessel of non corrosive FRP composite construction lined with NSF and/or FDA listed material, like high density polyethylene with fully replaceable polyurethane. Air cell burst pressure of minimum of 5 times the vessel operating pressure and cycle tested for 2,50,000 cycles.
-
-
-
... More
No. and capacity of Pressure Vessel – 01 Nos. x 200 Ltrs
-
-
-
... More
Control Panel with programmable logic controller (PLC) for cyclic operation of pumps. Pump working sequence should change after every operation.Contractor overload relays and MCBs should confirm to IEC 898 – 1995/ specifications. Blinking indications for pumps start, trip, low level trip, health supply should be provided in the panel along with the ammeter & voltmeter. Control panel should also consist of cooling fan. Main incomer MCB, Outgoing MCBs, Single phase preventors complete with auto manual swiches, dry run protection arrangements,Voltmeter/Ameter, Indication lights, Controller for dry run protection.
-
-
-
... More
Pressure transmitting relay bellow type fitted with micro switch and having maximum pressure and differential scale should confirming BS-6134 standards and IP55 protection class.
-
-
-
... More
GI heavy class(IS:1239) Suction and delivery header with brass Ball valves with plastic coated handle(tested to 20kg/sqcm), Hot Pressed brass OT-58 with stainless steel ball and P.T.F.E seal and O-Ring. Brass NRVs (Test pressure =20 Kg/sqcm) to be used should be with Springs and O-Ring arrangement.
-
-
-
... More
Complete set system to be mounted on a common base frame and shall follow following duty(Skid shall be powder coated ).
-
-
-
... More
Domestic Water Pumps (Set of Two Pumps One Working + One Standby)
-
-
-
... More
Capacity : app. 50 lpm
-
-
-
... More
Head : app. 55 m
1
261250
261250
... More
Flushing Water Pumps(Set of Two Pumps one Working + One Standby)
-
-
-
... More
Capacity : app. 50 lpm
-
-
-
... More
Head : app. 55 m
1
261250
261250
... More
Filter Feed Pump
-
-
-
... More
Providing, fixing and testing of skid mounted Fixed drive filter feed pumping system comprising of :-
-
-
-
... More
Horizontal centrifugal pumping set with stainless steel SS-304 stage casing and SS-304 impellers with stainless steel SS-316L shaft as per IEC standards and GJL250 cast i.ron suction & discharge casing, connected to TEFC ventilated induction motor of 2 pole, 2900rpm, suitable for 400/440 Volts, 3 phase, 50 Hz A.C. supply.
-
-
-
... More
Control Panele for cyclic operation of pumps. Pump working sequence should change after every operation.Contractor overload relays and MCBs should confirm to IEC 898 – 1995/ specifications. Blinking indications for pumps start, trip, low level trip, health supply should be provided in the panel along with the ammeter & voltmeter. Control panel should also consist of cooling fan. Main incomer MCB, Outgoing MCBs, Single phase preventors complete with auto manual swiches, dry run protection arrangements,Voltmeter/Ameter, Indication lights, Controller for dry run protection.
-
-
-
... More
GI heavy class(IS:1239) Suction and delivery header with brass Ball valves with plastic coated handle(tested to 20kg/sqcm), Hot Pressed brass OT-58 with stainless steel ball and P.T.F.E seal and O-Ring. Brass NRVs (Test pressure =20 Kg/sqcm) to be used should be with Springs and O-Ring arrangement.
-
-
-
... More
Complete set system to be mounted on a common base frame and shall follow following duty(Skid shall be powder coated ).
-
-
-
... More
Filter Feed Pumps (Set of Two Pumps One Working + One Standby)
-
-
-
... More
Capacity : app. 50 lpm
-
-
-
... More
Head : app. 30 m
1
223250
223250
... More
Providing and fixing horizontal centrifugal pumping set with stainless steel SS-304 stage casing and SS-304 impellers with stainless steel SS-316L shaft as per IEC standards and GJL250 cast i.ron suction & discharge casing, connected to TEFC ventilated induction motor of 2 pole, 2900rpm, suitable for 400/440 Volts, 3 phase, 50 Hz A.C. supply. Including control panel with startters, single phase preventor, Amperemeter, Voltmeter, incomer and outgoing MCBs, Copper bus bar, interconnecting wiring, dry run protection, GI suction and delivery pipe, vales, NRVs complete in all respects. (Set of two pumps Cap=400 LPM, Head=10 Meter One working+one standby)
1
147250
147250
... More
Pressure Filter (Domestic Water)
-
-
-
... More
Discharge : 3600 lph
-
-
-
... More
Suggested dia app. : 1000 mm
1
156750
156750
... More
Activated carbon Filter (Domestic Water)
-
-
-
... More
Discharge : 3600 lph
-
-
-
... More
Suggested dia app. : 1000 mm
1
156750
156750
... More
Water Softener
-
-
-
... More
Providing and fixing ‘Cation’ ION exchange water softener fabricated from minimum 8mm thick M.S. plate on shell and 10mm thick M.S. plate on dished ends complete with initial charge of filter media and ION exchange resins, face piping accessories, piping testing and commissioning complete with resins of approved quality and make and brine tank of required capacity. (Bidder must indicate type and quantity of resin used and quantity of salt required per regeneration).
-
-
-
... More
Minimum expected rate of flow: 3600 lph
-
-
-
... More
Total soft water to be produced between two regeneration: app. 66 Cu.m
-
-
-
... More
Expected raw water hardness : app. 500 ppm
-
-
-
... More
Expected treated water hardness: less than 100 ppm
-
-
-
... More
Total soft water to be produced between two regeneration: app. 10 Cu.m
1
204250
204250
... More
Providing and fixing M.S salt saturator, internally rubber lined as per requirement and externally painted with suitable anti-corrosive paint, with all required accessories for holding and supplying salt for softener complete in all respects, with electrically operated stirrer and of capacity 200 litres.
1
16625
16625
... More
Design, Fabrication, assembling, wiring, supply, installation, testing and commissioning of motor control centre fabricated out of 14 gauge CRCA sheet steel. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coats of red oxide primer and final approved shade of powder coated paint. 2 Nos. earthing terminals shall be provided for 3 phase, 4 wire, 50 Hz supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel before fabrication. Quoted rates shall be inclusive of cables (from this panel to panel of Hydropneumatic system and filter feed pumps and flushing water pumps in accordance to specification) with earthing from panel to earthing pit.
-
-
-
... More
Panel shall be supplied with P&I based online MIMIC display with LED's at all specific drive /operation to enable Visual Display of Complete pumps activity on Panel front.
-
-
-
... More
For domestic water hydro pumps, raw water pump, auto chemical doser and sump pumps etc. in plant room.
-
-
-
... More
Two incoming main isolation 100A TPN MCCB (35ka).
-
-
-
... More
32A TPN MCB outgoing for domestic RO/Soft water transfer pump-3 Nos
-
-
-
... More
32 A TPN MCB outgoing for Softener/filter feed pumps - 1 No.
-
-
-
... More
32 A TP MCB of for each sump pumps - 4 Nos.
-
-
-
... More
Panel type voltmeter 150mm with rotary selector switch for reading voltage between phases.
-
-
-
... More
Panel type Ammeter 150mm with rotary selector switch for reading currents between phases.
-
-
-
... More
Neon phases indicating lights on the incoming mains.
-
-
-
... More
All internal wiring colour coded from incoming mains to various switchgear, starter, meter, indicating lamp and bus bar. All the cable entry to the panel shall be from the top.
-
-
-
... More
(All for above from item (a) to (i) complete set). (The shop drawing to be prepared and approved before fabrication)
1
204725
204725
... More
Providing and fixing motor pump controller cum water level indicating panel in powder coated sheet metal box in 16 gauges M.S including the following:
-
-
-
... More
Electronic water level controller working on magnetic type sensing probes with necessary length of armored cable up to control panel froM UG tank and OH tank.
-
-
-
... More
Electronic minimum 4-level indicator with magnetic type sensing probes and necessary length of armored cable upto control panel.
-
-
-
... More
Arrangement of alternate switching mechanism for operational and standby pumps.
-
-
-
... More
For Water level indicators with following details:
-
-
-
... More
Underground tanks
-
-
-
... More
Minimum 4 level Multi level indicators with magnetic type sensor probes complete. (Each UGT/OHT)
6
13775
82650
... More
Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
-
-
-
... More
80mm dia
45
1140
51300
... More
100mm dia
30
1472
44175
... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.
-
-
-
... More
80mm dia
2
4275
8550
... More
100mm dia
2
6127
12255
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
-
-
-
... More
80mm dia nominal bore.
4
4599
18399.6
... More
100mm dia nominal bore.
4
6131
24525.2
... More
Supplying and installing following size of perforated painted with powder coating M.S. cable trays Cross Member with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.
-
-
-
... More
150 mm width X 50 mm depth X 1.6 mm thickness
30
771
23142
... More
300 mm width X 50 mm depth X 1.6 mm thickness
45
1126
50701.5
... More
Providing and fixing M.S. structural work fabricated from standard section e.g. M.S rounds, angles, channels, plates including cutting to size, drilling, welding fixing and welding to insert plates in RCC structural members or through dash fasteners as per site conditions as directed by Engineer-in-charge including cutting and making good the walls, ceilings and floors (for pipe supports, clamps etc.)
80
142
11400
... More
Submersible pumps
-
-
-
... More
Providing, fixing and testing of Submersible single stage single entry pumps with C.I.body and C.I. two vane enclosed type impeller connected to TEFC submersible motor for 415 volts, 3 phase, 50 cycles including MCC panel with level controllers, auto control, sequential change over facility with one proper working at low level & two proper working at high level with an audible alarm including all interconnectivity cables, MCB, copper bus bar, with both pumps connected to common outlet header including valves, non return valves, lifting chains etc. complete in all respect
-
-
-
... More
(one working+One Standby)
-
-
-
... More
(Solid handiling capacity 12mm)
-
-
-
... More
Capacity - 225 lpm (Each)
-
-
-
... More
Head - 12 m
-
-
-
... More
HP (Approx) - 1.0 HP
1
14725
14725
... More
IRRIGATION
-
-
-
... More
Piping Network
-
-
-
... More
Providing, laying & jointing in position uPVC pipe conforming to IS:4985 :2000 and suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc. jointing as per manufacturers' instruction, including earth work in excavation and refilling (Earth work includes 450mm of soil cover over the pipe and width of 300mm). Capton/Dinesh/Supreme
-
-
-
... More
90 mm OD/10kg/cm2
150
575
86346
... More
63 mm OD/6kg/cm2
157
387
60798.25
... More
50mm OD/6kg/cm2
513.15
334
171864.2
... More
40 mm OD/6kg/cm2
2004.4
304
609979.01
... More
Sprinkler & Accessories
-
-
-
... More
Providing & Fixing of Super Pro Gear Driven Pop up ( For Large Lawn) with ABS Riser having 3/4" inlet, Flow Shut Off, 5" Riser height, Radius reduction upto 75%, Patented arc set degree markings, Arc memory clutch with position recall, Time proven patented reversing mechanism. It has rubber cover which seals out dirt and increase product durability, and having optical check valve. It is capable of delivering 0.03 - 0.6 lps with dia of coverage from 2.44 - 14.6 m at 2.0 - 5bar.K-Rain USA/Rainspa, Italy/HIT USA
200
1293
258754
... More
Providing & Fixing of 3/4''Swing Joint. The swing Joint shall be used as a flexible swing joint assembly for 3/4" inlet sprinklers. The pipe shall be flexible black tubing constructed of linear low density polyethylene material. The tubing shall have a wall thickness of 0.090". It shall shall have an inside diameter of 0.490". The fitting shall be constructed of UV-resistant,thermoplastic material. The Swing aJoint shall have an operating pressure rating of 5.5 bar at 430.Harit/Aqua/K-Rain
200
124
24958
... More
Providing & Fixing of PP Service Saddle of 3/4" and1/2". Harit/Aqua/Rainson
5
124
623.95
... More
Valves & Accessories
-
-
-
... More
Providing & Fixing of Valve box 20" Rectangular Valve Box with cover. The valve boxes shall be high strength, high density polyethylene constructed material. It should be UV stabilizer with anti oxidants, resistant to moisture. K-Rain/HIT/Rainspa
23
3220
74067.82
... More
Providing & Fixing of Valve box 6" Round Valve Box with cover. The valve boxes shall be high strength, high density polyethylene constructed material. It should be UV stabilizer with anti oxidants, resistant to moisture. K-Rain/HIT/Rainspa
15
462
6943.8
... More
Providing & Fixing of a double acting plastic Air release valve 2" made of high strength plastic with fiber glass reinforced . The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 10 Bars and testing pressure shall be 16 Bars. Harit/Aqua/Armas
5
726
3634.95
... More
Automation Unit
-
-
-
... More
Providing & Fixing of 3" BSP Solenoid Made Nylon Glass Filled with flow control which shall be normally closed 24 VAC 50/60 cycle solenoid actuated angle pattern design. The valve pressure rating shall not be less than 12 bar. The valve body shall be constructed of high-impact, weather-resistant Nylon Glass Filled with heavy duty diaphragm and stainless steel screws, fasteners and components. The valve shall have manual open/close control (internal bleed) for manual opening and closing of valve without electrically energizing the solenoid, manual bleed can be removed for " tamper proof" operation. The valve shall operate with minimum 24 VAC at 12.0 bar. The valve must open or close in less than 1 minute at 10.5 bar, and less than 30 seconds at 0.7 bar. The valve construction shall provide for all internal parts to be removable from the top of the valve without disturbing the valve installation. K-Rain USA/Rainspa, Italy/HIT USA
15
11947
179211.9
... More
Providing & Fixing of Site Master Controller with two wire Decoder Based technology( 99 Station) having six programs with six start times per program with run time per station 0-10 hrs and irrigation water budget by program 0-250%, capable of running two program simultaneously with two nos. of maximum valves plus master valve running simultaneously and should have rain sensor capability.K-Rain USA/Rainspa, Italy/HIT
1
163926
163926.53
... More
Providing & Fixing of Site Master one station Decoder (Receiver) .K-Rain
USA/Rainspa, Italy/HIT USA
15
12228
183426.45
... More
Providing & Fixing of Surge Protection unit. K-Rain USA/Rainspa, Italy/HIT USA
5
6545
32726.7
... More
Providing & Fixing Earthing rod of copper 2 meter length for surge protection unit. K-
Rain USA/Rainspa, Italy/HIT USA
5
7272
36361.65
... More
Providing & Fixing of DBR Connectors. It shall be pre filled, low voltage, dry splice, Direct Bury, water proof wire connector that protect electrical connection from corrosion and moisture. Each splice Kit contains Two wire nuts, water proof, Gel- filled housing and 1 dual splice organizer. K-Rain USA/Rainspa, Italy/HIT USA
90
218
19636.2
... More
Providing & Fixing of Pump Start Relay. Pla/Siemens/ Havels
1
1013
1013.6
... More
Providing & Fixing of enclosure for electrical equipment duly powder coated with complying to IP 55.
1
467
467.75
... More
Providing & Fixing of 2.5 mm2 double core copper conductor cable 24 volt. Empire/Finolex/Plaza
341.75
36
12381.6
... More
Providing & Fixing of Conduit Pipe 20mm dia for laying of electric wires. AKG/Supreme/Finolex
341.75
25
8803.48
... More
HORTICULTURE
-
-
-
... More
Clearing grass and removal of the rubbish up to a distance of 50m outside the periphery of the area cleared.
16650.84
4
82421.66
... More
Trenching in ordinary soil up to a depth of cm including removal and stacking of serviceable materials and then disposing of surplus soil , by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/ and manure before and after flooding trench with water (excluding cost of imported earth , slude or manure).
16650.84
61
1031020.01
... More
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately).
5442.95
176
961605.98
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 part of stacked volume of earth after reduction by 20% :1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately)
-
-
-
... More
Holes 120 cm dia , and 120 cm deep
485
265
129000.3
... More
Holes 60 cm dia , and 60 cm deep
2300
34
79764
... More
Supplying and stacking of Good earth at site including royalty and carriage with all lead and lifts, (earth measured in stacks will be reduced by 20% for payment).
1003
408
409976.25
... More
Supplying and stacking of cow dung manure/cattle manure at site including cost and carriage with all lead and lifts, (manure measured in stacks will be reduced by 8% of payment)
1040.12
196
204081.95
... More
Supplying and spreading of fertilizer & pesticides at site of work
-
-
-
... More
DAP
300
38
11400
... More
Mixing earth and sludge or manure in proportion specified or directed.
140.6
28
4074.59
... More
Spreading of sludge,dump manure or/ and good earth in required thickness (cost of sludge dump manure or/ and good earth to be paid separately)
23510.24
41
975674.96
... More
Rough dressing the trenched ground including breaking of clods.
23510.24
1
27977.19
... More
Flooding the ground with water including making Kiaries and dismantelling the same
23510.24
1
39027
... More
Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.
23510.24
3
91219.73
... More
Fine dressing the ground
23510.24
2
68885
... More
Grassing with selection no-1, grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing including supplying good earth if needed (the good earth shall be paid for separately)
16650.84
38
632731.92
... More
With grass Turf
3500
10
36890
... More
Providing and display of (NISHAD RAJ PARK) following plant details as per given below.All supplied plants are
-
-
-
... More
Varieties of Trees with their specifications
-
-
-
... More
TREE (Stem height to be considered for height)
-
-
-
... More
Artocarpus altilis having height of 150-180cm stright & sturdy branches big poly bag well developed.
8
570
4560
... More
Alstonia scholaris having height of 150-180cm stright & sturdy branches big poly bag well developed.
8
332
2660
... More
Terminalia mantaly having height of 120-150cm stright & sturdy branches big poly bag well developed.
8
1900
15200
... More
Bombax malabarica having height of 150-180cm stright & sturdy branches big poly bag well developed.
2
570
1140
... More
Butea monosperma having height of 150-180cm stright & sturdy branches big poly bag well developed.
8
855
6840
... More
Bauhinia purpurea having height of 150-180cm stright & sturdy branches big poly bag well developed.
8
475
3800
... More
Cassia fistula having height of 150-180cm stright & sturdy branches big poly bag well developed.
28
570
15960
... More
Casuarina junghuhniana having height of 150-180cm stright & sturdy branches big poly bag well developed.
28
570
15960
... More
Cassia siamea having height of 150-180cm stright & sturdy branches big poly bag well developed.
33
570
18810
... More
Chorisia speciosa having height of 150-180cm stright & sturdy branches big poly bag well developed.
8
522
4180
... More
Dalbergia latifolia having height of 150-180cm stright & sturdy branches big poly bag well developed.
8
712
5700
... More
Diospyros melanoxylon having height of 150-180cm stright & sturdy branches big poly bag well developed.
8
522
4180
... More
Erythrina crista-galli having height of 150-180 cm stright & sturdy branches big poly bag well developed.
58
807
46835
... More
Ficus benghalensis having height of 150-180cm stright & sturdy branches big poly bag well developed.
25
332
8312.5
... More
Ficus infectoria having height of 150-180cm stright & sturdy branches big poly bag well developed.
20
570
11400
... More
Ficus Religiosa having height of 150-180cm stright & sturdy branches big poly bag well developed.
5
332
1662.5
... More
Holarrhena antidysenterica having height of 150-180cm stright & sturdy branches big poly bag well developed.
30
475
14250
... More
Holoptelea integrifolia having height of 150-180cm stright & sturdy branches big poly bag well developed.
6
475
2850
... More
Jacaranda mimosaefolia having height of 150-180cm stright & sturdy branches big poly bag well developed.
20
475
9500
... More
Michelia champaca having height of 150-180cm stright & sturdy branches big poly bag well developed.
25
712
17812.5
... More
Mimusops elengi having height of 150-180cm stright & sturdy branches big poly bag well developed.
25
475
11875
... More
Pterospermum acerifolium having height of 150-180cm stright & sturdy branches big poly bag well developed.
25
475
11875
... More
Plumeria acutifoliya multi branched in height 150-180cm in gunny bags
16
475
7600
... More
Plumeria alba multi branched in height150-180cm in gunny bags
16
475
7600
... More
Prosopis cineraria having height of 150-180cm stright & sturdy branches big poly bag well developed.
10
522
5225
... More
Peltophorum ferrugineum having height of 150-180cm stright & sturdy branches big poly bag well developed.
10
570
5700
... More
Plumeria pixi multi branched in height 150-180cm in gunny bags
10
475
4750
... More
Plumeria rubra multi branched in height 150-180cm in gunny bags
10
475
4750
... More
Saraca asoca having height of 150-180cm stright & sturdy branches big poly bag well developed.
7
712
4987.5
... More
Schleichera oleosa having height of 150-180cm stright & sturdy branches big poly bag well developed.
7
475
3325
... More
Shorea robusta having height of 150-180cm stright & sturdy branches big poly bag well developed.
2
475
950
... More
Tabebuia argentea having height of 150-180cm stright & sturdy branches big poly bag well developed.
8
570
4560
... More
Terminalia arjuna having height of 150-180cm stright & sturdy branches big poly bag well developed.
2
1140
2280
... More
Terminalia mantaly having height of 150-180cm stright & sturdy branches big poly bag well developed.
70
1425
99750
... More
Tabebuia rosea having height of 150-180cm stright & sturdy branches big poly bag well developed.
7
570
3990
... More
Trewia nudiflora
5
475
2375
... More
Manilkara hexandra
5
475
2375
... More
Tamarix dioca
5
712
3562.5
... More
Cordia gharaf
5
427
2137.5
... More
Cordia dichotoma
5
475
2375
... More
Sapindus mukorossi
5
427
2137.5
... More
Feronia limonia
5
475
2375
... More
having height of 150-180cm stright & sturdy branches big poly bag well developed.
5
2375
11875
... More
having height of 150-180cm stright & sturdy branches big poly bag well developed.
12
3325
39900
... More
having height of 150-180cm stright & sturdy branches big poly bag well developed.
25
570
14250
... More
having height of 150-180cm stright & sturdy branches big poly bag well developed.
5
380
1900
... More
having height of 150-180cm stright & sturdy branches big poly bag well developed.
20
1900
38000
... More
Lagerstremia having height of 150-180cm stright & sturdy branches big poly bag well developed.
30
655
19665
... More
having height of 150-180cm stright & sturdy branches big poly bag well developed.
55
950
52250
... More
having height of 150-180cm stright & sturdy branches big poly bag well developed.
5
532
2660
... More
Pencil pine having height of 150-180cm stright & sturdy branches big poly bag well developed.
40
950
38000
... More
FRUIT TREES
-
-
-
... More
Artocarpus heterophyllus having height of 280-300 cm stright & sturdy branches big poly bag well developed.
5
1900
9500
... More
Mangifera indica having height of 150-180cm stright & sturdy branches big poly bag well developed.
5
570
2850
... More
Phyllanthus emblica having height of 280-300cm stright & sturdy branches big poly bag well developed.
4
1425
5700
... More
Madhuca longifolia having height of 280-300cm stright & sturdy branches big poly bag well developed.
2
1425
2850
... More
Syzygium cumini having height of 280-300cm stright & sturdy branches big poly bag well developed.
3
665
1995
... More
Ziziphus mauritiana having height of 150-180cm stright & sturdy branches big poly bag well developed.
4
617
2470
... More
Carissa carandas (karaunda) having height of 150-180cm stright & sturdy branches big poly bag well developed.
3
427
1282.5
... More
Ficus carica (Fig) having height of 150-180cm stright & sturdy branches big poly bag well developed.
4
475
1900
... More
Syzygium cumini (Jamun) having height of 150-180cm stright & sturdy branches big poly bag well developed.
4
427
1710
... More
Grewia asiatica (Phalsa) having height of 150-180cm stright & sturdy branches big poly bag well developed.
4
617
2470
... More
Prunus domestica (Plum) having height of 150-180cm stright & sturdy branches big poly bag well developed.
4
475
1900
... More
Punica grantum (Anar) having height of 150-180cm stright & sturdy branches big poly bag well developed.
4
427
1710
... More
Prunus persica (Peach) having height of 150-180cm stright & sturdy branches big poly bag well developed.
4
522
2090
... More
PALM ( Stem height to be considered for height)
-
-
-
... More
Bismarckia Nobilis having height of 150-180cm trunk with 6-7 leaves well developed in big container pot bond condition.
13
4275
55575
... More
Fishtail palm having height of 150-180cm trunk with 6-7 leaves well developed in big container pot bond condition.
25
950
23750
... More
Foxtail palm having height of 280-300cm trunk with 60-70 leves well developed in big container pot bond condition.
20
2090
41800
... More
Roystonea regia having height of 280-300cm trunk with 6-7 leaves well developed in big container pot bond condition.
20
2850
57000
... More
Ravenala madagascariensis having height of 150-180 cm with 6-7 leaves well developed in big container pot bond condition.
5
2375
11875
... More
Washingtonia filifera (palm) having height of 150-180cm trunk with 6-7 leaves well developed in big container pot bond condition.
15
2375
35625
... More
Shrubs plant
-
-
-
... More
Buddha belly golden(B bel) ht of plants 150-180 cm in polybag size of 20 cm well developed.
120
190
22800
... More
Conocarpus of height 80-90 cm in big size polybag well developed.
120
142
17100
... More
Cassia alata of height 80-90 cm in big size polybag well developed.
120
142
17100
... More
Cassia biflora of height 80-90 cm in big size polybag well developed.
120
114
13680
... More
Cycas circinalis having trunk ht of 45-60 cm with 75-90 disease free fresh leaves in big size polybag well developed.
120
1045
125400
... More
Calliandra haematocephala of height 80-90 cm in big size polybag well developed.
70
95
6650
... More
Caesalpinia pulcherrima ht of plants 90-120 cm in big size polybag well developed.
120
114
13680
... More
Ficus long topiary multi ball topiary well branched (bushy) of height 120-135 cm in big size polybag well developed.
156
570
88920
... More
Casuarina topiary multi ball topiary well branched (bushy) of height 120-135 cm in big size polybag well developed.
120
712
85500
... More
Ficus benjamina ht of plants 120-150 cm in big size polybag well developed.
120
142
17100
... More
Giant bamboo ht of plants120-150 cm in polybag size of 20 cm well developed.
145
950
137750
... More
Golden Bamboo ht of plants120-150 cm in polybag size of 20 cm well developed.
120
142
17100
... More
Nerium oleander dwarf ht of plants 90-100 cm in big size polybag well developed.
120
57
6840
... More
Phoenix roebelenii having trunk of 60-75 cm with 45 leaves in big size gunnybag well developed.
120
712
85500
... More
Raphis excelsa ht of plants 50-60 cm with 6-8 suckers in big size gunnybag well developed.
120
380
45600
... More
Tecoma Gaudi chaudi ht of plants 80-90 cm in big size gunnybag well developed.
120
114
13680
... More
Yucca sylvestrix well branched (bushy) of height 50-60 cm in poly bag of 30 cm size gunnybag well developed.
120
114
13680
... More
Ficus topiary well branched (bushy) of height 50-60 cm in poly bag of 30 cm size gunnybag well developed
4
47500
190000
... More
Wet land Shrubs
-
-
-
... More
Phyllanthus reticulatus
50
760
38000
... More
Lawsonia inermis
25
570
14250
... More
Punica granatum
25
760
19000
... More
Dichrostachys cinneria
25
760
19000
... More
Urena lobata
25
760
19000
... More
Ipomea carnea
35
712
24937.5
... More
Tecoma stans
25
760
19000
... More
Carissa spinarum
25
712
17812.5
... More
Wet land Grasses
-
-
-
... More
Typha
25
712
17812.5
... More
Phragmites
25
807
20187.5
... More
Saccharum munja
25
855
21375
... More
Saccharum spontaneum
25
855
21375
... More
Vetiver
25
855
21375
... More
Bamboo
25
1045
26125
... More
Desmostachya bipinnata
25
855
21375
... More
Polygonum spp.
25
807
20187.5
... More
Cyperus alternifolius
25
855
21375
... More
Thalia dealbata
25
807
20187.5
... More
Canna
25
855
21375
... More
Tamarindus indica
25
807
20187.5
... More
Butterfly garden species
-
-
-
... More
Aristolochia spp
2
665
1330
... More
Citrus sp
2
427
855
... More
Mimosa pudica
2
142
285
... More
Vitex negundo
2
95
190
... More
Senna occidentalis
2
114
228
... More
Cadaba fruticosa
2
114
228
... More
Capparis separia
2
237
475
... More
Capparis decidua
2
142
285
... More
Ziziphus nummularia
8
237
1900
... More
Clerodendrum inerme
8
28
228
... More
Plumbago zeylanica
8
57
456
... More
Amaranthus
8
28
228
... More
Lantana indica
8
47
380
... More
Ixora
8
76
608
... More
Jatropha integerrima
8
57
456
... More
Acacia nilotica
8
66
532
... More
Tridax procumbens
8
47
380
... More
Asclepias curassavica
8
66
532
... More
Calotropis gigantea
8
57
456
... More
Vallaris solanacea
8
80
646
... More
Nerium oleander
8
57
456
... More
Passiflora spp
8
95
760
... More
Barleria prionitis
8
66
532
... More
Castor plant
8
95
760
... More
Crotolaria
7
71
498.75
... More
Ground cover plants
-
-
-
... More
Adenium well developed of height 15-20 cm in poly bag. (11 Nos./sqmt)
120
1757
210900
... More
Asparagus densiflorus well developed of height 15-20 cm in poly bag. (24 Nos./sqmt)
120
570
68400
... More
Alternanthera red well developed of height 15-20 cm in poly bag. (24Nos./sqmt)
120
380
45600
... More
buxes well developed of height 15-20 cm in poly bag. (24 Nos./sqmt)
120
427
51300
... More
Alpinia speciosa variegata ht of plants 30-45 cm in poly bag. (11 Nos./sqmt)
120
570
68400
... More
Dianella green developed of height 20-25 cm in polybag (24 Nos./sqmt)
120
522
62700
... More
Dracaena victoria ht of plants 30-45 cm in poly bag. (11 Nos./sqmt)
120
1092
131100
... More
Dracaena tricolour ht of plants 30-45 cm in poly bag . (11 Nos./sqmt)
120
760
91200
... More
Canna dwarf ht of plants 30-45 cm in poly bag . (11 Nos./sqmt)
120
855
102600
... More
Ficus longisland well developed of height 30-40 cm in poly bag of size 20 cm. (11 Nos./sqmt)
120
475
57000
... More
Ficus reginald well developed of height 30-40 cm in poly bag of size 20 cm. (11 Nos./sqmt)
120
760
91200
... More
Galphimia glauca ht of plants 30-45 cm in polybag (11 Nos./sqmt)
65.81
807
53141.58
... More
Hymenocallis lily ht of plants 30-45 cm in polybag (11 Nos./sqmt)
120
570
68400
... More
Clerodendron inerme well developed of height 15- 30 cm in big poly bag (24 Nos./sqmt)
120
380
45600
... More
Lantana Sellowiana of height 30-45 cm in polybag. (11Nos./sqmt)
120
475
57000
... More
Nerium olender dwarf of height 30-45 cm in polybag. (11Nos./sqmt)
120
427
51300
... More
Ophiopogon black well developed of height 15-20 cm in polybag (24 Nos./sqmt)
120
380
45600
... More
Ophiopogon variegated well developed of height 15-20 cm in polybag (24 Nos./sqmt)
120
570
68400
... More
Ophiopogon white well developed of height 15-20 cm in polybag (24 Nos./sqmt)
120
617
74100
... More
Philodendron selloum of height 30-45 cm in in polybag (11 Nos./sqmt)
120
1045
125400
... More
Pandnus dwarf of height 30-45 cm in in polybag (11 Nos./sqmt)
120
855
102600
... More
Syngonium white butterfly of height 15-30 cm in polybag. 24 Nos./sqmt)
120
570
68400
... More
Spathiphyllum of height 15-30 cm in polybag. (11 Nos./sqmt)
120
1140
136800
... More
Strelitzia of height 15-30 cm in polybag. (11 Nos./sqmt)
120
1425
171000
... More
Red cordyline well developed of height 15-30 cm in polybag (11 Nos./sqmt)
65.81
665
43763.65
... More
Rhoeo well developed of height 15-30 cm in polybag (11 Nos./sqmt)
120
665
79800
... More
Russelia well develope of height 15-30 cm in polybag (24 Nos./sqmt)
120
570
68400
... More
Red Fountain grass well develope of height 15-30 cm in polybag (11 Nos./sqmt)
120
475
57000
... More
Tecoma capensis of height 30-45 cm ingunnybag well developed.(11 Nos./sqmt)
120
570
68400
... More
Tabernaemontana coronaria dwarf ht of plants 50-60 cm bushy in big size gunnybag well developed. (11 Nos./sqmt)
120
427
51300
... More
Purpal Fountain grass well develope of height 15-30 cm in polybag (24 Nos./sqmt)
120
475
57000
... More
White Fountain grass well develope of height 15-30 cm in polybag (24 Nos./sqmt)
120
570
68400
... More
Wedelia well developed of height 15-20 cm in polybag (24 Nos./sqmt)
110
380
41800
... More
Spider lily well developed of height 20-25 cm in polybag. (11 Nos./sqmt)
120
475
57000
... More
Zephyranthes lily well developed of height 20-25 cm in polybag. (11 Nos./sqmt)
120
522
62700
... More
Crinum menehune well developed of height 15-20 cm in polybag. (24 Nos./sqmt)
120
71
8550
... More
Leucophylum well developed of height 30-45 cm in polybag.
120
427
51300
... More
Ganic mycoplasma well developed of height 15-20 cm in polybag. (24 Nos./sqmt)
120
142
17100
... More
Preneorniq well developed of height 15-20 cm in polybag. (24 Nos./sqmt)
120
332
39900
... More
Schefflera arboricola 'variegata' well developed of height 15-20 cm in polybag. (24 Nos./sqmt)
120
142
17100
... More
Murraya Exotiea 'variegata' well developed of height 15-20 cm in polybag. (24 Nos./sqmt)
120
570
68400
... More
Pleomeie reflesa 'variegated' well developed of height 15-20 cm in polybag. (24 Nos./sqmt)
120
71
8550
... More
Dwalt Murraya well developed of height 15-20 cm in polybag. (24 Nos./sqmt)
120
237
28500
... More
Equisetum well developed of height 15-20 cm in polybag. (24 Nos./sqmt)
120
71
8550
... More
FLOWERING PLANT (375.00 sqm.)
-
-
-
... More
Portulaca hybrid plug seedling well developed of height 10-15 cm in polybag .
125
285
35625
... More
Vinca hybrid dwarf plug seedling well developed of height 10-15 cm in polybag.
125
285
35625
... More
Verbena hybrid plug seedling well developed of height 10-15 cm in polybag.
125
285
35625
... More
WINTER FLOWERING
-
-
-
... More
Calendula hybrid plug seedling well developed of height 10-15 cm in polybag.
125
285
35625
... More
Petunia hybridaplug seedling well developed of height 10-15 cm in polybag.
125
285
35625
... More
Salvia hybridplug seedling well developed of height 10-15 cm in polybag.
125
285
35625
... More
Plantation of Trees & shrubs plant at site i/c watering and removal of unsaverieable material's as per direction of officer in charge (excluding cost of plant & water )
150
19
2850
... More
Plantation of Ground Covers plant at site i/c watering and removal of unsaverieable material's as per direction of officer in charge (excluding cost of plant & water )
150
114
17100
... More
SURVELLIANCE
-
-
-
... More
WBC0ECLNM36T2
3
25000
75000
... More
36 CHANNEL NVR H.265 VIDEO
-
-
-
... More
COMPRESSION 2 SATA UPTO 16TB
-
-
-
... More
AND SUPPORT UPTO 12M
-
-
-
... More
RESOLUTION 5M IP CAMERA AT 25
-
-
-
... More
FPS
-
-
-
... More
WBC0ECLIB2R3FME
30
3500
105000
... More
1080P RESOLUTION CMOS IP BULLET
-
-
-
... More
CAMERA WITH BUILT IN FIXED LENS
-
-
-
... More
3.6MM IR 25 MTR 12 V POE
-
-
-
... More
WBC0ECLIB5R4VMX
12
9500
114000
... More
5 MP IP Bullet Motorized 2.7 to 13.5
-
-
-
... More
mm with 40 Mtrs IR Sony
-
-
-
... More
image Sensor
-
-
-
... More
WBT0ECAT6G305B
30
6500
195000
... More
CAT6 24 AWG SOLID BARE COPPER
-
-
-
... More
305 METER LENGTH OUR TYPE OF B
-
-
-
... More
SINGLEMODEFIBER
5000
20
100000
... More
OPTICAL FIBRE SINGLE MODE
-
-
-
... More
WBC0E1816POE
12
25999
311988
... More
WBOX 16 PORT POE + 2 Uplink
-
-
-
... More
Switch
-
-
-
... More
MEDIACONVERTOR
12
4500
54000
... More
MEDIA CONVERTOR ETTHERNET TO
-
-
-
... More
OPTICAL FIBRE
-
-
-
... More
WBC0ECLID2R12022
12
35000
420000
... More
2 MP 22X IP PTZ WITHOUT ADAPTER
-
-
-
... More
ACCESSORIES
34
10000
340000
... More
ACCESORIES CREWS STANDS BOXES
-
-
-
... More
CONNECTORS CONDUIT PIPES
-
-
-
... More
INSTALLATIONIPCAM
-
-
-
... More
INSTALLATION OF IP BASED
100
2000
200000
... More
CAMERA
-
-
-
... More
WBC0ECLIB5R3FM
15
5500
82500
... More
5 MP RESOLUTION CMOS IP BULLET
-
-
-
... More
CAMERA WITH BUILT IN FIXED LENS
-
-
-
... More
3.6MM DWDR SUPPORT SD CARD
-
-
-
... More
SUPPORT IR 30 MTR 12 V POE
-
-
-
... More
GST Extra as applicable
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements