Uttar Pradesh Housing And Development Board Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Housing And Development Board - UPAVP Tender
Eprocure
Opening Date12 Jun 2021
Closing Date22 Jun 2021
Tender AmountRefer Documents
Costs
EMD
₹ 3,60,000Document Cost
₹ 1,770Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_UPHDB_594120_1Bid Award Id
ViewTender No
1070/M-15A/79 Dt 08-06-2021(Sr No-1)Tender Authority
Uttar Pradesh Housing And Development Board ViewPurchaser Address
-Website
http://https://upavp.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Sand filling in plinth under floors including supply of necessary quantity of sand from a distence not exceeding 8 kms . Form the site of work and including watering, dressing etc.rate to include cost of all materials labour T&P etc. required for proper approvel completion of the work
4.91
-
500
... More
Providing and laying Cement concrete in the proportion of (brick ballast : coarse sand : cement) 8:4:1 in foundations and under floors,including supply of all matarials labour tools & plants etc. required for proper completion of the work brick 40mm nominal size.
11.44
-
3250
... More
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4)Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 7.5 liters/sqm (6) Treatment of soil under apron along external perimter 5 liters/sqm. (As per manufacturer's standard dilution)
42.42
-
120
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-200.
2.68
-
7150
... More
As in item no. above but No-7 for slabs (Using 1:1.5:3 Mix concrete)
7.22
-
7700
... More
Class M-150 brick work in 1:6 cement and coarse sand of 1.50 to 2.00 fineness modulus mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work.
26.9
-
3900
... More
40mm thick damp proof course of approved cement and coarse sand in the proportion of 1:2 with and including water proofing materials as ordered by the Engineer in change in the proportion as specified by the manufacurer including supply of all materials labour and T&P etc. required for proper completion of the work and including proper curing & shuttering as necessary.
8.42
-
301.52
... More
Painting on D.P.C with two coat of blow bitumen 80/50 or 85/25 @ about 1.7 KG/ SQM including cost of fule.
8.42
-
160
... More
Same as in item no-9 above but in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall not more than 1 brick thick.
17.07
-
4370
... More
Same as in item no-12 above but in 1:3 cement and coarse sand mortar in superstructure for wall thickness 115MM & below, brick work.
6.13
-
5420
... More
Mild steel (Tor steel or plain ) in plain work such as reinforced concrete or reinforced, brick including bending for proper shape and including supply of steal its wastage bend hooks and authorised over lapping shall be measured .
8.83
-
6100
... More
15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)
16.28
-
170
... More
12 mm cement plaster in single coat on fair side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 coarse sand (F.M. 1.50 to 1.75)
23.08
-
140
... More
12mm cement plaster in single coat on rough side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1)1 cement : 6 coarse sand (F. M.1.50 to 1.75)
143.16
-
155
... More
Supply and Fixing of 6mm thick china glazed tiles of first qualitty in flooring or in skirting or dado laid with 1:3 cement and approved course sand mortar finishing with white cement slurry jointing and polishing complete including supply of all materials ,labour and T&P etc. required for proper completion of the work.(A) Ground Floor (Tile Size-300x300)
32.72
-
950
... More
Supply and Fixingh 6mm thick china glazed tiles of first qualitty in flooring or in skirting or dado laid with 1:3 cement and approved course send morter finishing with white cement slurry jointing and polishing complete including supply of all materials ,labour and T&P etc. required for proper completion of the work.
140.97
-
950
... More
Laying of 25mm thick kota stone of size 45 x 45 cm and above flooring over previously prepared base with 2 cm thick 1:3 and cement and coarse sand mortar including fillibng of joints with cement mixed pigments required for matching the shade floor as per the direction of E/I including cutting, polishing with wax polish including supply of all materials, labour, T& P, etc.required for proper complition of work. But in dado with 25mm thick stone.
5.47
-
970
... More
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25 mm thick floor) including material labour T&P etc for proper completion of the work.
29.55
-
230
... More
supply & fixing of commercial quality ply wood board flush door shutters of 32 mm thick conforming to IS code 2202 part 1 (1983) including flixing of wooden cleats &stops and including flixing and adjustment of hings bilts lochs handles springs outher fittings but excluding their supply and including painting with two coats of black japan on all iran fitting if necessary. (SI No-470(i) 32mm thick
19.53
-
1350
... More
Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. Providing & fixing of hold fast for chaukhats of doors and windows.
62.4
-
61
... More
Providing & fixing of door / windows grill.
120.6
-
64
... More
Providing & fixing of Z-Section steel windows
150.75
-
61
... More
Providing & fixing of Angle Iron of size (35X35X5 mm )
179.1
-
62
... More
Construction of drain along with apron as per prescribed drawing as per direction of E.I.
32.84
-
519
... More
Finishing wall with two coat of water proofing cement paint of approved make such as super snowcem, Durrocem Robiacem , Guttucem supercem quality & of required shade on undercorated wall surface (two coat ) over & including one coat white cement primer to given an even shade after thoroughly brushing the surface to powderd materials including curing & cost of all material.
23.08
-
73
... More
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacturer such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials.
73.34
-
79
... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm
12
-
150
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250X10 MM
12
-
55
... More
Providing and fixing 200X10 MM
12
-
50
... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm
24
-
25
... More
Applying primer coat over new steal and outher metail surface after paint includingh prepairing the surface by thoughly cleaning oil grease dirt and other foreign matter and scoured with wire bruhes fine steal /wood scrappers sand and knotting includingh cost off all and supply of all materials ,labour and T&P etc. required for proper compoletion of the workabout but every subsequent cost after first coat on steel surface above but every subseqent coat after first coat on wood or steel surface.
17.75
-
70
... More
Same as item 34 above but on new wood surface.
39.06
-
72
... More
Providing an laying "brick coba " 120mm thick laid with M150 class brick bat coba 7.50 cm thick with gap of 15mm to each other over 20mm thick base of cement mortar 1:4 cement and course sand mixed with aerelic cement concrete water proffing compound filled gaps of coba & top of coba morter mixed with water proofingh compound in 1:4 cement and course sand morter finished wal parapet shall be nono lythic plaster wall upto 30 cm higher and junction and corner by brick ballast cement and course sand masonary coba with top finished plaster mixed with acetic water proofing sompound @ 2% by weight & includingh S/o all materrial labour T&P etc. copmletion for proper completiom of the work.
43.7
-
1000
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :4.0 mm thick glass panes
6.03
-
780.81
... More
FOR PLUMBING WORKS
-
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
6
-
4698.81
... More
Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standerd pattern including cutting & making good the walls wherever required. a)White Vitreous China Flat back wash Basin size 550x400 mm with single 15 mm C.P. brass pillar tap.
4
-
2175.81
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern
2
-
6654.31
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia
12
-
76.01
... More
Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
2
-
1112.02
... More
CP Brass fittings - Providing and fixing unplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore
12
-
71.94
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 ( a) 15 mm nominal bore
6
-
363.1
... More
Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931 (a) 15 mm nominal bore
18
-
461.08
... More
Providing and fixing soil, waste and vent pipes : 100 mm dia. Centrifugally cast (spun) iron socketed pipe as per IS: 3989
20
-
946.61
... More
Providing and fixing plain bend of required degree with access door - 100 mm Sand cast iron S&S as per IS-3989
5
-
400.11
... More
Providing and fixing 75 mm Sand cast iron S&S as per IS-3989
5
-
333.46
... More
Providing and fixing plain bend of required degree 100 mm Sand cast iron S&S as per IS-3989
5
-
338.66
... More
Providing and fixing 75 mm Sand cast iron S&S as per IS-3989
5
-
251.13
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 75 mm outlet Sand cast iron S&S as per IS-3989
5
-
1368.91
... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: 100 mm
5
-
417.27
... More
Same as above item No 53 but for 75 mm
5
-
353.53
... More
Providing & fixing cast iron coller. 100 mm sand cast iron S & S as per IS - 3989
5
-
354.87
... More
Same as above item No-55 but for 75 mm sand cast iron S & S as per IS - 3989
5
-
222.14
... More
Providing and fixing centrifugaly cast iron single equal plain junction of required degree.75x75x75mm
5
-
407.7
... More
Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size) around C.I Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground) 100 mm dia
35
-
708.09
... More
Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion.110 mm
25
-
264.39
... More
Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. Bend 87.5 degree 110 mm Bend
5
-
112.54
... More
Providing and fixing for Shoe (Plain) 110 mm Shoe
5
-
98.63
... More
Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
5
-
250.3
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
2
-
211.52
... More
Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc. (internal work).Internal work-Exposed on wall 15mm dia nominal bore
60
-
246.92
... More
Same as above but for 20mm dia nominal bore
40
-
298.23
... More
Same as above but for 25mm dia nominal bore
20
-
379.61
... More
Painting GI pipes and fittings with SYNTHETIC enamel paint over a ready mixed priming coat, both of approved quality for new work.-15mm dia nominal bore
60
-
13.17
... More
Same as above but for 20mm dia nominal bore
40
-
15.73
... More
Same as above but for 25mm dia nominal bore
20
-
20.54
... More
Providing and fixing GI Union in GI pipes including cutting and threading the pipe and making long screws etc. complete (new work).-15mm dia nominal bore
20
-
204.32
... More
Same as above but for 20mm dia nominal bore
15
-
226.34
... More
Same as above but for 25mm dia nominal bore
10
-
294.76
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end ) 25 mm nominal bore
2
-
430.88
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931:15mm nominal bore
1
-
525.44
... More
Providing and fixing brass stop cock of approved quality.20 mm nominal bore
1
-
282.93
... More
Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank.[Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license]. 1000 liters capcity
1000
-
7.63
... More
Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within a lead of 50m. All kinds of soil Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm.
60
-
193.27
... More
Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. 100mm diameter
60
-
274.79
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) all round S.W. pipes including bed concrete as per standard design - 100mm dia SW pipe
60
-
708.09
... More
Providing and fixing square-mouth S.W. gully trap grade‘A’ complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 150 x 100 mm size P type With Sewer bricks conforming to IS : 4885
4
-
2012
... More
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). With FPS bricks of class designation 75 (i) For Sewer Line
4
-
9451.41
... More
Supplying & Fixing of CP soap tray fixed to the wall with PVC rubber plug with CP brass screws.
4
-
800
... More
Providing & fixing 60x2cm. C.P. brass towelrail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screw.PARRYWARE C9948
4
-
900
... More
FOR ELECTRICAL WORKS - PUBLIC TOILET
-
-
-
... More
Wiring points for light with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects.
12
-
610
... More
Same as item No.(85) but for fan and light duty exhaust fan.
6
-
671
... More
Supply and wiring of submain in PVC insulated 1100 V grade single core copper conductor cable in heavy duty PVC conduit partly laid in slab along with reinforcement before concreting with copper earth continuity wire etc. complete in all 2 X 10 sqm
60
-
272
... More
Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects.
6
-
195
... More
Supply & fixing of single wall light bracket made of brass on matching polished MDFEG board brass including connection etc. as required. CAT-AAA
8
-
1650
... More
Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work.480x480x200 mm. size
2
-
525
... More
Supply and fixing of 240 volts 'L' series miniature circuit breaker 9 K.A / 10 K.A.in existing MCB, DB complete with connections as required. 5 - 32 amps.CAT-A
2
-
260
... More
Supply fixing and making connection of following DPMCBS complete in all respects as per direction and satisfaction of engineer-in-charge. 32 Amp. 2 Pole MCB (10 KA) (Legrand Lexic ) CAT-A
2
-
740
... More
Supply and fixing of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required 300mm sweep.
6
-
2500
... More
SEPTIC TANK WITH SOAK PIT
-
-
-
... More
Excavation in Foundation in ordinary soil (Loam clay, or sand) including lift upto 1.5 metre (5 fts.) and lead upto 30m (100 fts) & including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 m. (100 fts) from the foundation trenches. (Rate is including Royality).
61.06
-
100
... More
Providing and laying Cement concrete 1:5:10 (1 cement : 5coarse sand : 10 graded brick ballast 40 mm nominal size) including supply of all materials.labour and T&P etc. required for proper completion of the work and curing complete. also including cost of formwork in foundation
2.77
-
3100
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit in the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-200. As in item no. 3 above but for slabs (Using 1:1.5:3 Mix concrete)
2.19
-
7700
... More
M-150 brick work in 1:4 (one cement and four coarse sand sand of 1.50 to 2.00 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work.
14.27
-
4650
... More
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
1.46
-
6100
... More
15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 4 Coarse sand
60.96
-
276.43
... More
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25 mm thick floor).
10
-
230
... More
Providing and fixing soil, waste and vent pipes : 75mm diameter : Sand cast iron S&S pipe as per IS: 1729
2
-
800.18
... More
Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design:(With 20x20mm square bar)
22
-
365.92
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 as per direction of E/I.
1
-
21909.09
... More
M.S. GATE
-
-
-
... More
Excavation in foundations in ordinary soil (Loam clay or sand) including lift upto 1.5 m (5 fts.) and lead upto 30 mt. (100 fts.) & including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-Incharges upto a distance of 30mt. (100 fts) from the foundation trenches.
10.94
-
100
... More
Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) including supply of all materials, labour T & P rtc required for proper completion of the work and curing complete also including cost of formwork in foundation & floors.
0.73
-
3250
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in raft foundation and footing excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item.
1.44
-
6759
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in columns excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item.
1.45
-
8050
... More
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and and over lapping & hooks.
5.1
-
6100
... More
12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 coarse sand
10.08
-
155
... More
Finishing walls with water-proofing on cement paint of approved make such as super snowcem, durrocem, robiacem, guttucem supercem quality and of required shade on undecorated wall surfaces (three coat) over one and including one coat white cement primer to give an even shade after thoroughly brushing the surface to powdered materials including curing and cost of all materials.
10.08
-
53
... More
Mild steel or iron work in heavy sizes such as trusses built up gates, door frames, record racks, roof work gates etc. wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing.
1555.2
-
65
... More
Painting or varnishing work in small areas or new wood steel work with one coat upto one square metre of ready mixed priming paint and one coat of approed superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should fonfirm the ISI no. 103-1950 (M.S. works)
21.6
-
70
... More
DHARMSHALA
-
-
-
... More
Earth work Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 m and including filling watering and ramming of exacavated earth into the trenches or into the space betbeen the building and the side of foundation trenches.
63.53
-
100
... More
Sand filling in plinth under floors including supply of necessary qualitity of sand from a distence not exceeding 8 kms . Form the site of work and including watering, dressing etc.Rate to include cost of all materials labour T&P etc. required for proper completion of the work
10.31
-
500
... More
Providing and laying Cement concrete 8:4:1(coarse sand :brick ballast : cement) in foundations and under floors,including supply of all matarials labour tools &plants etc. required for proper completion of the work.brick agregate 40mm nominal size.
15.7
-
3250
... More
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4)Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 7.5 liters/sqm (6) Treatment of soil under apron along external perimter 5 liters/sqm. (As per manufacturer's standard dilution)
78
-
120
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-200.
1.16
-
7150
... More
As in item no. 120 above but for slabs (Using 1:1.5:3 Mix concrete)
13.09
-
7700
... More
As in item no. 120 above but for beam (Using 1:1.5:3 Mix concrete)
1.55
-
8159
... More
Class M-150 brick work in 1:6 cement and sand of 1.25 fineness modulus mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work.
31.06
-
3900
... More
40mm thick damp course of cement and sand in approved course 1:2 with and including water proofingh materials as ordered by the Engineer in change in the proportion as specified by the manufacurer including supply of all materials labour and T&P etc. required for proper completion of the work and includingh proper curing & shuttering as necessary.
8.72
-
301.52
... More
Painting on D.P.C with two coat of blow bitumen 80/50 or 85/25 @ about 1.7 KG/ SQM including cost of fule.
8.72
-
160
... More
Same as in item no.123 above but in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall not more than 1-1/2 brick thick for extra laboure to above item.
22.8
-
4370
... More
Same as in item no.126 but in 1:4 cement and coarse sand mortar in superstructure for wall thickness 115MM & below brick work.
4.45
-
5420
... More
Mild steel(Toe steel or plain ) in plain work such as reinforced concrete or reinforced, brick including bending for proper space and including supply of steal its wastage bend hooks and authorised over lapping shall be measured .
14.69
-
6100
... More
15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)
12.08
-
170
... More
12 mm cement plaster in single coat on fair side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 coarse sand
101.33
-
140
... More
12mm cement plaster in single coat on rough side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1)1 cement : 6 coarse sand.
238.91
-
155
... More
10 mm ceiling plaster in 1:3 (1 cement :3 coarse sand) Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25 mm thick floor).
26.16
-
230
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate
73.74
-
350
... More
2 cm (3/4") thick cement plaster in dado or skirting in 1:2 consisting of one part of cement and two part of of approved coarse sand laid in panels , finished with 3mm (1/8") floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials labour and T & P etc. required for proper complition of works.
9.24
-
220
... More
Providing and fixing glass strips in joints of terrazo/ cement concrete floors. (a) 40 mm wide and 4 mm thick
110.61
-
22
... More
supply & fixing of commercial quality ply wood board flush door shutters conforming to IS including flixing of wooden cleats &stops and including flixing and adjustment of hings bilts lochs handles springs outher fittings but excluding their supply and includingh painting with two coats of black japan on all iran fitting if necessary screw to be supplied departmentaly. 35mm thick (b) For double leaf
5.04
-
1520
... More
Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. -(a) Providing & fixing of hold fast for chaukhats of doors and windows.
21.6
-
61
... More
Providing & fixing of door / windows grill.
244.8
-
64
... More
Providing & fixing of Z-Section steel windows
306
-
61
... More
Providing & fixing of Angle Iron (35X35X5 mm)
61.2
-
62
... More
Construction of drain along with apron as per prescribed drawing as per direction of E.I.
43.6
-
519
... More
Finishing walls with water-proofing on cement paint of approved make such as super snowcem,durrocem, robiacem, guttucem supercem quality and of required shade on undecorated wall surfaces (two coat) overone and including one coat white cement primer to give an even shade after thoroughly brushing the surface to powdered materials including curing and cost of all materials.TWO COAT
238.91
-
73
... More
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials.
182.14
-
79
... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm
2
-
150
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : -250X10 MM
2
-
55
... More
Providing and fixing 200X10 MM
2
-
50
... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm
4
-
25
... More
Applying primer coat over new steal and outher metail surface after paint includingh prepairing the surface by thoughly cleaning oil grease dirt and other foreign matter and scoured with wire bruhes fine steal /wood scrappers sand and knotting includingh cost off all and supply of all materials ,labour and T&P etc. required for proper compoletion of the workabout but every subsequent cost after first coat on steel surface above but every subseqent coat after first coat on wood or steel surface.
17.28
-
70
... More
Same as item 148 above but on new wood surface.
10.08
-
72
... More
Providing an laying "brick coba " 12mm thick laid with M150 class brick bat coba 7.50 cm thick with gap of 15mm to each other over 20mm thick base of cement mortar 1:4 cement and course sand mixed with aerelic cement concrete water proffing compound filled gaps of coba & top of coba morter mixed with water proofingh compound in 1:4 cement and course sand morter finished wal parapet shall be nono lythic plaster wall upto 30 cm higher and junction and corner by brick ballast cement and course sand masonary coba with top finished plaster mixed with acetic water proofing sompound @ 2% by weight & includingh S/o all materrial labour T&P etc. copmletion for proper completiom of the work.
80.23
-
1000
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :4.0 mm thick glass panes
12.24
-
780.51
... More
FOR ELECTRICAL WORKS - DHARAMSHALA
-
-
-
... More
Wiring points for light with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects.
10
-
610
... More
Same as item No.153 but for fan and light duty exhaust fan.
8
-
671
... More
Supply and erection of AC 1200mm Sweep, 230/250 Volts, 50 Hz ceilling fan with regulater standar down rod, blades including connection etc. complete as required
8
-
1800
... More
Supply and wiring of submain in PVC insulated 1100 V grade single core copper conductor cable in heavy duty PVC conduit partly laid in slab along with reinforcement before concreting with copper earth continuity wire etc. complete in all 2 X 10 sqm
120
-
272
... More
Supply & fixing of single wall light bracket made of brass on matching polished MDFEG board brass including connection etc. as required. CAT-AAA
5
-
1650
... More
Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work.480x480x200 mm. size
2
-
525
... More
Supply and fixing of 240 volts 'L' series miniature circuit breaker 9 K.A / 10 K.A.in existing MCB, DB complete with connections as required. 5 - 32 amps.CAT-A
2
-
260
... More
Supply fixing and making connection of following DPMCBS complete in all respects as per direction and satisfaction of engineer-in-charge. 32 Amp. 2 Pole MCB (10 KA) (Legrand Lexic ) CAT-A
2
-
740
... More
Vitrified flooring
-
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete
82.8
-
1110
... More
LED street light fitting
-
-
-
... More
Supply and fixing of 7 mt. G.I. Octagonal Pole of approved make (top dia 70mm, bottom dia 130mm and base plate 12mm thick) having 3mm thickness with single arm bracket (1 Mtr. length) on R.C.C. foundation including the cost of foundation, foundation bolts, excavation & back filling and required T & P complete in all respect. [Deduct cost of Rs. 1000.00 for 1000mm long simple Bracket]
4
-
16500
... More
S/F of 1500mm long sword type single arm decorative bracket suitable for 7 Mt. long galvanized pole including decorative balls and domes. [Bajaj make or its equivalent]
8
-
4500
... More
Supply and burying of safe earthing electrode T-19 (Hot Dip Galvanized) length upto 2000 mm, outer G.I. Pipe 50 mm, Inner Pipe 25, terminal dia 12mm, outer G.I. pipe of 16SWG and inner G.I. pipe of 12 SWG with Hot Dip Galvanized up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive and conductive property with 50 Kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged over & masonry husing from electrode terminal to switch board cost of 25 x 3 G.I. strip will be extra.
4
-
6450
... More
Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size.25 sqmm 3.5 core
60
-
373
... More
Supply and fixing of LED street light fitting having dia cast aluminium body and diffuser with driver set suitable for 80-90 watt confirming to IP 65 protection complete in all respects. (CAT - AAA)
8
-
8850
... More
S/F of Mica Junction Plate with MCB and connection pin
4
-
2500
... More
S/Laying of 63/90 mm P.V.C. Pipe etc. complete in all respect.
200
-
200
... More
Supply & fixing of plain type aluminium lug to the cable leeds included with tape and making connection etc.
32
-
27
... More
Supply & laying of 1.5 mm x 2 core copper cable Under pole.
40
-
82
... More
Construction of boring with 2.0 H.P Submersible Pump Set,
-
-
-
... More
Transportation Charges of drilling equipment including assembly and other material as required.
1
-
12000
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. 150mm dia
100
-
444.01
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. (I) 110 mm nominal size dia
60
-
520.32
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. (I) 110 mm nominal size dia.
40
-
564.61
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.
3
-
1149.72
... More
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
12
-
743.28
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of : 110 mm dia
1
-
164.37
... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 110 mm clamp.
1
-
1221.44
... More
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 110 mm dia.
1
-
197.13
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 65 mm dia nominal bore
67
-
620.56
... More
PUMPING SET KSB make submersible pump set suitable for installation in bore well of min 110 mm inner dia preferably more and having under noted specifications.[2.0 H.P.}
1
-
25000
... More
Supply and fixing of finolex of copper cable ISI marked submersible cable of size 4 sq mm
100
-
155.15
... More
External Boundary Wall
-
-
-
... More
Excavation of foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches. As per
15.45
-
100
... More
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.
2.36
-
5250
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in Beams excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-200.
1.27
-
8159
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in Footing excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-200.
3.2
-
6759
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in Column excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-200.
2.99
-
8050
... More
Class M-150 brick work in 1:6 cement coarse sand (of 1.50 to 2.00 )fineness modulus) mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work.
3.39
-
3900
... More
Brick work in super-structure above plinth level up to floor two level (up to two storeys) including necessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall 230mm thick to (1:6 cement & coarse sand).
17.51
-
4370
... More
Mild steel or iron work in plain work such as reinforced cement concrete (when not included in over all rate) wrought to required shape as necessary including bending for proper completion of work, supply of steel, all labour etc. required and including wastage bend, hooks and authorised over lapping shall be measured.
13.2
-
6100
... More
15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 coarse sand
63.01
-
155
... More
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1)1 cement : 6 coarse sand.
70.26
-
140
... More
Finising walls with water proof cement paint of approved make and on new work with 2 coat to give an even shade including supply of all materials labour and tools and plants etc. required for proper completon of the work.Including one coat white cement primer to give and even shade after throughly after brushing the surface to.
133.26
-
53
... More
12 w led light on 5.0mtr 25 kva DG set and RCC bench
-
-
-
... More
Providing & Installation of 12 W LED STREET LIGHT ON 5.0 METER POLE (SPV Module-12v / 75 Watt, battery- 12volt/75AH, with 5 mtr pole and all acessories.
10
-
30000
... More
providing and Installation of 25 kva D.G. set nd all acessories complete as per direction of E/I
1
-
275000
... More
providing and fixing of RCC bench and all acessories as per direction of E/I
10
-
15000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements