UP Cooperative Bank Limited Tender

Erection of single support on ST pole 11 mtr. Long including digging of pit in kachcha/pakka road/khadanja along with fitting of all accessories of H.T/LT Lines as per RESSPO schedule complete in all respect

Erection of Double pole on ST pole 11 mtr. Long including digging of pit in kachcha/pakka road/khadanja along with fitting of all accessories as per RESSPO schedule complete in all respect.

Grouting of S.T. pole as per RESSPO schedule

Erection of single support on PCC pole 8.5 mtr. Long including digging of pit in kachcha/pakka road/khadanja along with fitting of all accessories of H.T/LT Lines as per RESSPO schedule complete in all respect.

Fabrication of V type cross arm/T-channel.

Driving of MS earth rod in earth and joining through G.I. wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts.

Erection fixing og grounting of stay rod in cement, sand and brick ballast in ration 1:4:8 in block 600x600x300 mm with binding & fixing of stay insulator complete in all respect

Removal of old and used ACSR Rabbit counctor from 11 KV line and carrige the same from work site to store center Shahibad GZB.

Removing of all line acceseries from 11 KV line and dismantling of STP.including carrage the same from work site to J.E Store/Store center, sahibabad.

Carriage fo 3x70 sqmm 11 KV XLPE cable from Store Center, Shababad GZB to work site including safe loading and unloading at both ends.

Laying of 3x70 sqmm 11 KV XLPE cable inculding looping and hositng complete in all respect.

Providing and finxing of 3x70 sqmm 11 KV XLPE cable termination end kit.

Laying, sagging and binding of L.T. AB cable 3x95/3x120 sqmm. On pole in L.T line.

Fixing og Distribution box on poles with suitable clamps for Providing connections.

Providing and Fixing of piercing clamp

Laying sagging and sagging of ACSR Dog on pole for 11 KV line complete with binding and jumpering ect. As per RESSPO.

Dismantling of damaged single Support ST/PCC pole & carriage of damged pole from site to J.E. store including loading and unloading at both ends.

Safe loding and carriage of 10 KVA T/F from ESC from Cetral Store, Shaibabad/Sector 20, Noida/J.E Store. To site work and installation of 10 KVA T/F on pole, along with double earthing of

Dismantling of 1000 KVA T/F from old plinth and safe carriage to another place for shifting.

Construction of plinth sutiable for 1000 KVA T/F as per RESPO

Installation of 1000 KVA T/F at new plinth and Complete in all respect.

Construction of boundary wall in brick work with cement motrat 1:6 ( 1 cement: 6 coarse sand) for wore mesh in the size of 0.22mx0.60m ( 0.30m in earth, 0.30m above ground level) including plaster in cement mortar 1:4 and finishing with water proof cement paint.

Construction of boundary wall in brick work with cement motrat 1:6 ( 1 cement: 6 coarse sand) for wore mesh in the size of 0.22mx0.60m ( 0.30m in earth, 0.30m above ground level) including plaster in cement mortar 1:4 and finishing with water proof cement paint.

Fabrication and providing Wire mesh fencing frame s of size 1.5mt x 1.80 mt fabricated out of MS angle iron of size 40x40x5 mm having 2 Nos. legs of 45 Cm. long in each frame duly welded and fixed with wire mesh of size 75mm.25mm, 10 SWG within the frame, pressed under MS flat of size 25x5 mm inside the angle iron on all four sides with the help of approx. 20 Nos. bolts and nuts. Of 10 mm dia along with cross bracing of 25x5 mm MS flat on every frame, 45 Cm legs of frame will be grouted in 1:2:4 cement mortar with cement, coarse sand 20 mm gauge stone ballast in the size of 0.22x0.22x0.45 Mtrs. Every frame will be painted with one coat of red oxide and two coats of blue synthetic enamel paint of approved make after proper cleaning.

The above mentioned frame will be jointed with each other with 70 mm long MS flat of size 25x5mm by first class welding as per site requirement.

Fabrication an d providing of Wire mesh Fencin g frame for gate of size 1.5x180. Mts Fabricated as items No. 2 and fixing of gate frame at each S/S as per site requirement with grouted frame providing 3 Nos. 100 mm size heavy duty hinges duly welded and having suitable locking arrangement and proper painting mentioned as above.

Supply installation testing of earth electrode strip in pipe terminal type chemical earthing . proper hot deep galvanization dia 50 mm length 3 mtr down, strip size- 32 x 6 terminal connection hole dia 8mm .The cavity between the strip & pipes is filled with conductive mixture–for hermetically filling inside the cavity i.e between secondary conductor & primary conductor, Crestline compound is to be injected in the electrode assembly. it is a combination of high conductivity metal alloys, copper & aluminum power, conductive carbon/ cement and bonding material etc. the electrode should be sealed from both the ends. the outer pipe of the electrode should be zinc coated. the characteristics of this compound is highly conductive, non magnetic & non corrosive in G.I. supply of backfill compound each electrode should be supplied with bags of 25 k.g x 2 bfc compound (ground resistance enhancement powder 50kg asper CPRI test.