UP Jal Nigam Tender

4(B) 185 sqmm 3.5 core

Supplying and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge 7(A) 70 Sq.mm

7(B) 120 Sq.mm

Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB’s (Four Pole 36 KA with thermal magnatic release) Switches complete and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA, P.F, KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic aluminum busbars as per IS8623 or above insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB’s shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. CUBICAL PANEL BOARD (MCCB TYPE) (A) MAIN L.T.PANEL Incoming : one (1) No.400Amp. TPN-1No. Metering : One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch. One (1) No. (0-400A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc. One (1) Set of Phase Indication Lamp. Bus Bar : One (1) No.400 A, TPN aluminimum bus bar of suitable length. Outgoing : Phase indication lamps on each outgoing to be provided. 200 Amp. MCCB- 2 No. 100 Amp. MCCB- 1 No. 63 Amp. MCCB- 1 No. OR outgoing as per site requirment(AS/SLD)

(A) MAIN L.T.PANEL Incoming : one (1) No.400Amp. TPN-1No. Metering : One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch. One (1) No. (0-400A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc. One (1) Set of Phase Indication Lamp. Bus Bar : One (1) No.400 A, TPN aluminimum bus bar of suitable length. Outgoing : Phase indication lamps on each outgoing to be provided. 200 Amp. MCCB- 2 No. 100 Amp. MCCB- 1 No. 63 Amp. MCCB- 1 No. OR outgoing as per site requirment(AS/SLD)

Supply and fixing 400 AMP four pole Moulded case type on load change over switch with enclosure(also suitable for panel mounting with extra cost of bus bar) including the cost of labour, T & P , painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge.-

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and refilling etc as required.

Point wiring for SP MCB controlled light points with 2 x 1.5 sq.mm FR PVC insulated stranded copper conductor wire in surface / recessed medium class PVC conduit, along with 1 No. 1.5 sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Supply and erection of AC 1200mm Sweep, 230/250 Volts, 50 Hz ceilling fan with standard down rod, blades including connection etc. complete as required -Make: Usha Cat No.SONATA MAX

Supply of AC 230/250 Volts, 50 Hz 55 w 1280 rpm Wall Fan including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required.-400 mm sweep.-Make: USHA Cat No. MIST AIR ULTRA

Supply and erection of Recess mounted maintained type EXIT LED light with in built battery pack for three hours duration, complete in all respects