UP Jal Nigam Tender

Supply of silent type DG set, engine, alternator capable of developing 500 KVA at 415 ± 6%, 50Hz AC at.85 P.F. lagging and self exciting coupled with suitable BHP diesel engine through flexible coupling and mounted on common base plate complete with fuel tank inside the acousting system and inbuilt control panel 12 volt lead acide Battery with lead silencer manual control & AVM pads D.G. set shall be mounted in open sky resting ont the foundation as per the design. AND AS FOLLOWS

Supply of silent type DG set, engine, alternator capable of developing 500 KVA at 415 ± 6%, 50Hz AC at.85 P.F. lagging and self exciting coupled with suitable BHP diesel engine through flexible coupling and mounted on common base plate complete with fuel tank inside the acousting system and inbuilt control panel 12 volt lead acide Battery with lead silencer manual control & AVM pads D.G. set shall be mounted in open sky resting on the foundation as per the design * ACB 800A Amp,4Pole Electrically Operated Drawout Type, 50kA Microprocessor based with O/L, S/C & E/F Protection, 01 No, Multifunction Meter showing all Electrical Paramater CTR-/5A, 500V, 01 No, CT 1000/5A, Cl.1, Capsulated Bar Primary (Metering), 01 No, Phase Indicating Lights (Red, Yellow, Blue) 22.5f, 230V AC, 01 No, on/off/Trip Indicating Lights (Red, Green, Amber) 22.5f, 24V DC, 01 No, start/stop Push button, 01 No, Emergency Stop Push button, 01 No, on delay timer, 01 No, Auto/Manual selector switch, 01 No, Breaker ControlSwitch 25A 2Pole 2 Way Double Through Spring Return Type, 01 No, Battery Charger 230V AC/ 24V DC, 20A Automatic Trickle I Boost for DG Battery Charging, 01 No, DC Voltmeter Analog Type 0-30V DC, 01 No, DC Ammeter A nalog Type 0-30A DC, 01 No, Control MCB 6 Amp SP, 100kA, 01 No, MCB 25A DP, 10kA, 01 No, CT Terminals Disconnecting Type 10A, 01 No, Aux. Relays, 01 No, Aux. Terminals, 01 No, N/L 32A, 01 No , * Suitable AMF panel floor mounting type comprising of Ammeter/Voltmeter with selector switch, power factor meter, short circuit protection of main supply, Thermal overload protection, main supply voltage monitor short circuit protection relay, selector switch auto/manual/off, indicating lamps, push button start/stop/re-set etc. * Anti-Vibration mountings * Exhaust pipe, fuel line and fuel tank *Complete power wiring and earthing of D.G. set and AMF panel as per IER/PWD specification with necessary power and control cable, salt, charcoal, G.I earth electrodes, watering pipe, C.I. earth boxes and G.I. earth strip of adequate size . * Installation of DG set and Other Accessories including Commissioning and Testing .

Construction of Foundation of DG set and AMF Panel.