Saharanpur Development Authority Tender

M-150 Brick work 1:4 cement & four coarse sand in foundation and plinth including supply of all materials labour, Tools & plants etc. required for proper completion of the work. SI-305a

12 mm thick plaster with cement and coarse sand of 1.25 fineness modulus in 1:4 including neat cement floating coat over brick work minimum thickness not to be less then icm including suppy of all materials, labour, tools and plants etc. requried for proper completion on work. S.I.-584

Cement Concrete with 2cm, guage approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, tools & plants etc required for proper completion of the work. SI-279

Construction of un-reinforced dowel jointed at expansion and construction joint only plain Cement Concrete pavement thickness as per design over a prepared sub base in 1:1.5:3cement coarse and fine aggregates confirming to IS 383 maximum size of coarse aggregates not exceeding 25 mm mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weight batcher using approved mix design laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing) spreading by the concerete with shovels rackes compacted using needle, scred and plate vibrators and finshing in continuous operation including provision of contraction and expansion, construction joint as per norms, applying debonding strips primer, sealant, dowel bars, neer approaches to bridge/ culvert and construction joint, admixtures as approved, curing of concrete slabs for 14 days, curing compound (Where specified) including Cost of Polythene Sheet and Dowel bar and also including complete shifting of materials & Concrete etc complete work. thickness of c.c is less then 20 cm New item no. 9 (1) (Road work)

Dismentling brick work or stone work in line or cement motar including stacking of materials as directed by the engineer charge within a distance of 60 meter. as per S.I. 692

Disposal of Dismental material obtained from dismentling up to 5 km distance including loading, unloading and cartage complete in all respect as per diretion of engineer in charge.S.I.- 231a

Concrete with 4cm guage stone ballast. Finesand of 1.25 F.M. and cement in proportion of 1:5:10 including supply of all materials, labour, t&p etc. required for proper completion of the work complete in all respect. S.I. No-273/2016

R.C.C. work with cement, approved coarse sand & 2cm gauge approved stone girt in proportion of 1:1.5:3 in slab exluding supply of reinforcement and its bending, but including its fixing & binding the same with 24 B.W.G.G.I. binding wire & including necessary centering and shuttering etc. and supply of all material, labour, t&p etc. required for proper completion of the work including cost of binding wire (S.I. NO-284a)

Mild steel or Iron in plain work such as R.C.C. or RB work including bending for proper shape and including supply of steel & its wastage, bend, hooks and authorised overlapping shall be measured and including cost of binding wire.--------------(SI NO-504)