Rural Engineering Department Tender

Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base with 43 grade cement or any other type as per Cluse 1501.2.2 M30(Grade) (1:1½:3) coarse and fine aggregates conforming to IS 383 maximum size of coarse aggregate not exceeding 25mm, mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips primer, sealant, admixtures as approved, curing concrete slabs for 14 days, curing compound (Where specified) and water finishing to lines and grade as per drawing and Technical specification

Supply of 80mm thick I shaped mechanically compressed inter locking cement concrete pavers block manufactured by high pressure & controlled vibration machine having plan dimension 200x(160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The compressive strength of concrete paver blocks shall not be less than30 MPa & by weight 4.5 Kg/no. Including cost of all material, labour, T&P etc. required for proper completion of work as directed by Engineer-In-Charge

Supply and Fixing of Informatory Sign Board including Painting & Lettering etc. as per given specification complete work at site.