Rural Engineering Department Tender

Same as in item no. 1 but for 5 amp plug point with piano type switch & socket etc. 141©

Same as in item no.1 but for call bell with piano type switch or socket etc.142©

Supply & fixing of power plug with 15 amp 250 volts flush type switch & 3 pin 15 amp 250 volts flush type socket in suitable M.S. box of 175 mm * 100mm * 50 mm size with bakelite sheet cover 3 mm thick fixed with brass machine screws & washer1139

Supply & fixing of Sheet Steel Enclosure Surface/ Flush Mounting fitted With 20/32 Amp. 2Pin and earth metal clad scraping earth plug and socket complete in all respects as per direction and satisfaction of engineer-in-charge. 1031

Supply and wiring of submain with two no. 2.5 sq. mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty PVC conduit concealed in the wall with one No. 1.5 sq. mm. FRlSH PVC insulated 1100 V grade multistrand single core copper conductor ar earth continuity wire drawn inside the conduit. complete in all respect.(1307(c)

Supply and wiring of submain 2 number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. 221(c)

Supply and wiring of submain in PVC insulated 1100 V grade single core copper conductor cable in heavy duty PVC conduit partly laid in slab along with reinforcement before concreting with copper earth continuity wire etc. complete in all respect. 4 X 10 sqmm 278(c)

Supply and wiring of submain 4 number 16 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 32mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 10 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. 4x16 sqmm 279(b)

Supply and laying of heavy duty PVC conduit complete with bend and other accessories as required and 14 S.W.G. fish steel wire etc. in slab alongwith reinforcement before concreting and plastering complete in all respects. 20 mm dia. conduit 281(a)

25 mm dia. conduit 282(a)

Supply fixing and concealing of 20mm dia. 16 SWG (1.5 mm) thick rigid steel conduit pipe in the wall including cutting of brick work, laying of conduit and fixing it with M.S. hooks and then plastering with cement sand mortar finished to level with matching colour wash including cost of proper threading of the conduit & providing necessary socket, bends and chuck nuts and as directed by the Engineer in charge with the supply of all material labour and T & P required for proper completion of work. ( for Telephone) SI 148

S/F of surface / flush mounting TPN Distribution board with additional matel door without MCB complete in all respects as directed at site by Engineer-in-charge. 4 ways TPN CAT A 1026(a)

6 ways TPN CAT B 1027

Supply & fixing of 6/10/16/20/25/32 amp. SP MCB (10 KA) CAT B 1002

Supply and fixing of 4 pole Isolator. 63 Amp 4 Pole(Cat A) (1007 b)

100 Amp 4 Pole(Cat A) 1007©

S/F of 63 AMP four pole change over switch on 40x40x6 mm angle iron frame, including the cost of labour ,T&P ,painting and other material required for proper completion of work . 377

S/F of LED tube light with batten suitable for up to 1X22 watt LED tube light fitting including tube on suraface complete in all respect. CAT-AAA a) 1x22 Watt. (1413)

Supply and fixing of batten/ angle holder complete in all respect. 405

Supply anf fixing of recess / Surface /Pendent mounting round 12 to 15 Watt LED Down Lighter having Powder Coated die cast aluminium housing with heat sink diffuser / Reflector and driver set complete in all respect. ( Mirror Light)Category AA (1402)

Supply and fixing of recess/surface mounting round 24 watt to 32 watt LED Down Lighter having powder coated die cast aluminium housing with extended heat sink , diffuser / reflector and driver set completed in all respect.(ceiling light) Cat AA)1404

S/F of water tight oblong 10 Watt LED bulkhead luminaire with driver set confirming to IP 65 and above Protection.complete in all respect. CAT -AAA Category AA(1417)

Erection and testing of ceiling fan and regulator etc excluding supply of down rod, complete in all respect. (1115)

Supply and fixing of electronic Fan Regulator 120-280V, ISI marked , on the existing switch board including making connections, required material , labour T&P etc. for proper completion of work .(1203(a)

S/F of hexagonal fan box with hexagonal side of approx. 80 mm.in length fabricated from 16 SWG M.S. sheet incorporating with 10 mm. dia. M.S. round bar duly bent for supporting fan hanger duly painted with red oxide and screwing arrangement(1149)

Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts nuts and washers etc complete in all respects.(1120)

Supply and fixing of 16 gauge MS drum duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect.(1122)

Supply and burying of 600mm x 600 mmx6mm Copper plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and one earthing leads of one No. 8 SWG copper.wire in 15mm dia G.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and Copper wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects.(705)

Supply & fixing of one number 8 SWG G.I. wire in 15mm dia G.I. Pipe of earthing, laid in ground or in wall duly conceale including the cost of cement, sand, labour, T&P other material required for proper completion of the work (S.I. No. 721)a) Same as PS 721 but with one number 8 SWG copper wire. (722)

S/F of door chime on Polished M.D.F.E.G. board including making connections etc. complete in all respects.(1102)

S/F of danger board fabricated from 10 gauge M.S. sheet as per E/I rules. (1109)

S/F of shock treatment chart ( prescribed under I.E.rules ) duly framed with glass and supported from back with hard board or soft board with supply of all material labour T & P etc for proper completion of work.(1134)

Supply and laying of 1800 mm x 900 mm x 20 mm thick chequered rubber matting of tested quality.(1136)

Supply and erection of factory fabricated and wired metal clad dust and vermin proof mounting panel TPN switch board complete with HRC tube heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respect. The instrument chamber shall be separate and shall complete of flush type ammeter, volt meter, selector switches for ammeter and volt meter, instrument fuses, current transformer etc.The board shall have suitable capacity electrotype aluminum bus bars as per IS 8623 insulates with heat shrink sleeving and mounted on non-hygroscopic support such as CMC / DMC support with detachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable and boxes, reverse entery boxes in case of pedestal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer - in - Charge. All outgoing switches of 100Amp. and above will be provided with ampere meter current transformers and selector switches and instrument fuses etc.The switches board shall be fabricates with CRCA sheet with minimum thickness of 1.6/2mm.cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only. Incoming 200 Amp TPN 1 No,Outgoing 100 Amp TPN-2 No (802(a)(iii)

Supply of AC 230/250 volts, 50 HZ ceiling fan with standard down rod, blades, 2 nos. caps etc. complete (Make : Bajaj / Crompton / Havells) 1400 mm sweep (only for estimate purpose) NS

Supply of AC 230/250 volts, 50 HZ exhaust fans including providing nuts, bolts, mounting frame and other accessories etc. complete (Make : Bajaj / Crompton / Havells) 300 mm sweep 900 rpm (only for estimate purpose)

Supply of 12 to 15 watt LED Bulb for Batten /Angle holder.Make: Phillips / Polycab NS

Providing & fixing of 3 Pin telephone outlet complete in all respect on existing board with connections as required. (only for estimate purpose)NAS

Providing, drawing, connecting and testing of telephone wire 2 pair 0.51 sqmm. tinned copper conductor PVC insulated in existing conduit from telephone outlet box to the junction box/tag block. (only for estimate purpose) NS

Providing and fixing connecting and testing of telephone tag block in MS box with hinged and lockable cover duly painted over primer as required. (only for estimate purpose) 10 /20 Pair NS