Public Works Department Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Public Works Department - PWD Tender
Eprocure
Opening Date21 Feb 2019
Closing Date26 Feb 2019
Tender Amount₹ 90,00,000
Costs
EMD
₹ 6,50,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_CEMBD_315981_1Bid Award Id
ViewTender No
563/E-TENDER-M.Circle/18-19 DATED 01-02-2019Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://uppwd.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 kms. from the site of work and including watering, dressing etc rate for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 255
124.28
-
480
... More
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm complete Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 7.5 liters/sqm (6) Treatment of soil under apron along external perimter 5 liters/sqm. (As per manufacturer's standard dilution) for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. cH No 8
975.57
-
115
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-200. including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 283(A)
4.04
-
7100
... More
R.C.C. work with cement approved coarse sand and 20 mm. but for the lighter beams i.e. having spans upto 6 m. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-200. including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No AR11
53.75
-
8188
... More
R.C.C. work with cement approved coarse sand and 20 mm. but in R.C.C. Raft foundation and footing guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-200. including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No AR11
61.09
-
6888
... More
R.C.C. work with cement approved coarse sand and 20 mm.in R.C.C. columns in1:1.5:3having strength not less than M 150. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-200. including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No S.I 289
58.3
-
8000
... More
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 504
165.61
-
5600
... More
M-150 brick work in 1:6 (one cement and six coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinthincluding bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 303+ 307A - NEW ITEM 1]
78.2
-
4500
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 13mm nominal size) including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 361 c
24.17
-
320
... More
Painting on D.P.C. with two coat of air blown bitumen 80/50 @ about 1.7 kg/sqm including cost of fuel if any including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No NEW ITEM-1
24.17
-
60
... More
M-150 brick work in 1:6 (one cement and six coarse sand sand of 2.25 fineness modulus) but in super-structure above plinth level up to floor two level ( up to two storeys ) mortar in including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 303+ 307A - NEW ITEM 1 + 309+310]
90.86
-
4970
... More
12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 fine sand. including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 586+596
209.04
-
143
... More
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1)1 cement : 6 fine sand including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 586
225.12
-
130
... More
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger, J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 649+650
209.04
-
72
... More
Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, tools and plant etc. required for proper completion of the work. (Three Coat)including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No660+661
225.12
-
66
... More
Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 1a+2+4c)
279.8
-
65
... More
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25 mm thick floor) including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 601A
35.04
-
220
... More
First Class Brick on edge floor laid dry joints sand filled including preparation of base to proper slope and its ramming and. including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 615
935.8
-
400
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes. including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. [DSR 10.16.3/1.04]
12445.44
-
107
... More
Providing high impact Polypropylene reinforced cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T.(DSR-12.8/1.04)
1567.32
-
353
... More
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.80 mm thick with zinc coating not less than 275 gm/m² including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. (DSR-12.7.1/1.04)
265.6
-
542
... More
Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gm/m² including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. DSR - 12.4.1/1.04
140
-
584
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. a) 160mm diameter including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T.
160
-
600
... More
M-150 brick work in 1:4 (one cement and six coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinthincluding construction mangers bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T.
70
-
4650
... More
Providing and laying in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) work,in foundation and floors. including proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 601A
160
-
220
... More
15 mm cement plaster in and finshed even and smooth. (1) 1 cement : 4 fine sand. including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. DSR 13.5.1/1.04
150
-
201
... More
Providing & fixing 25mm dia nominal bore (medium duty) G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T.
75
-
247
... More
Concealed pipe including painting with 15mm dia nominal boreanticorrosive bitumatic paint, cutting chases and making good the wall. including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T.
10
-
285
... More
Painting G.I. pipes and fittings 15mm dia nominal bore with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work.including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T.
10
-
9.5
... More
Painting G.I. pipes 25mm dia nominal bore. and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work. including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T.
75
-
15.5
... More
Providing and fixing 32mm dia nominal bore gun metal gate valve with wheel of approved quality. including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T.
2
-
500
... More
Providing and fixing 15 mm nominal bore brass stop cock of approved quality. including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T.
20
-
260
... More
Brick work in but in 1: 4cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work including necessary cutting and moulding of bricks as required and also including honey comb brick work thickness including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 307a+309+310A
2.13
-
5190
... More
R.C.C. work with but for SLAB cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in beams excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 284A
1.56
-
7650
... More
Mild steel or iron work of small sizes and sections Providing & fixing of door / windows grillsuch as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 502C
138.06
-
59
... More
Mild steel or iron in plain work Hold fast such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 502 a
4.8
-
55
... More
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 502 a.
11.35
-
5600
... More
15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand) including bending for proper completion of the work and including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No
12
-
5600
... More
12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 fine sand.including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 586+596
205.29
-
143
... More
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1)1 cement : 6 fine sand.including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 586
217.45
-
130
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 605
108.92
-
330
... More
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement 18 mm thick.including all meterial, T&P, labour & all taxes but excluding G.S.T. [DSR 11.6.1/1.04]
26.67
-
336
... More
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal sizelaid in onelayer neat cement (25 mm thick floor). including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 601A
34.93
-
220
... More
Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 1a+2+4c)
4.86
-
65
... More
Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, tools and plant etc. required for proper completion of the work. (Three Coat) including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 660+661
205.29
-
66
... More
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials including all meterial, T&P, labour & all taxes but excluding G.S.T SI No 649+650.
239.93
-
72
... More
Making grooves 10 to 12 X 12mm and upto 25 X 15 mm deep in plaster of the walls or in ceiling vertically or horizontally as required including all meterial, T&P, labour & all taxes but excluding G.S.T.New item 2
52.48
-
65
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters including all meterial, T&P, labour & all taxes but excluding G.S.T. S.I NO 520
15.3
-
1600
... More
Providing and fixing ball bearing for rollong shutters. including all meterial, T&P, labour & all taxes but excluding G.S.T. S.I NO 523
4
-
440
... More
Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc including all meterial, T&P, labour & all taxes but excluding G.S.T. (DSR-11.8)/1.04
7.2
-
35
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes including all meterial, T&P, labour & all taxes but excluding G.S.T. [DSR 10.16.3/1.04]
497.49
-
107
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. including all meterial, T&P, labour & all taxes but excluding G.S.T. (DSR 12.50)/1.04
121.65
-
529
... More
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.80 mm thick with zinc coating not less than 275 gm/m² including all meterial, T&P, labour & all taxes but excluding G.S.T. (DSR-12.7.1/1.04)
25.38
-
542
... More
Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gm/m² including all meterial, T&P, labour & all taxes but excluding G.S.T. DSR - 12.4.1/1.04
12.69
-
584
... More
Providing and fixing glass strips of 3 mm. thickness in joints of floor, and skirting at the time of laying floors flush with floor level including labour, tools plants etc. complete. (a) of 35 depth including all meterial, T&P, labour & all taxes but excluding G.S.T. S.I.No 631
381.22
-
20
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. a) 160mm diameter including all meterial, T&P, labour & all taxes but excluding G.S.T. M.R
10
-
600
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in slab excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also required for proper completion of the works Binding wire cost being inluded in the item. including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 284A
5.82
-
7650
... More
Supply & fixing 35mm thick Single leaf of flush doors commercial quality conforming to IS 2202 Part 1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied departmentally.including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 470ii
3.68
-
1400
... More
Mild steel or iron work Providing & fixing of door / windows grill. of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 502c
138.06
-
59
... More
Mild steel or iron work Z-Section windows (Openable) of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 502b
53.46
-
57
... More
Mild steel or iron work Angle iron door chaukhat 40*40*5 of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 502b
37.65
-
57
... More
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and and over lapping & hooks.including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 504
14.97
-
5600
... More
15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand) including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No D.D.R 13.5.181.04
6.99
-
201
... More
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1)1 cement : 6 fine sand. including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 586
112.44
-
130
... More
12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 fine sand.including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 586+596
54.62
-
143
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to ISjointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specifiedincluding all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 284A
22.21
-
950
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 605
18.72
-
330
... More
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement 18 mm thick.including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No D.S.R 11.6.1/1.04
4.06
-
336
... More
Supply and fixing 6 mm thick China glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. required for proper completion of the work. (Size of tiles upto 300x300mm).including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 628
12.82
-
900
... More
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal sizelaid in onelayer neat cement (25 mm thick floor).including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 601A
14.7
-
220
... More
Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 1a+2+4c
7.07
-
65
... More
.Painting two coat over priming coat but on new wood surface (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 284A including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 1b+2+4c
7.35
-
67
... More
Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, tools and plant etc. required for proper completion of the work. (Three Coat) including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 660+661
112.44
-
66
... More
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materialsincluding all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 649+650
54.62
-
72
... More
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (Ceiling) .including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 649+650
26.35
-
72
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes.including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No New item 3b
2.43
-
550
... More
Making grooves 10 to 12 X 12mm and upto 25 X 15 mm deep in plaster of the walls or in ceiling vertically or horizontally as required.including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No New item 2
53.37
-
65
... More
Providing and fixing glass strips of 3 mm. thickness in joints of floor, and skirting at the time of laying floors flush with floor level including labour, tools plants etc. complete. (a) of 35 depth including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 631
65.52
-
20
... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm.including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 9.62.2
2
-
150
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : (a) 200 mm x 10mm including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 9.63.2
2
-
50
... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No 9.66.1
4
-
25
... More
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.including all meterial, T&P, labour & all taxes but excluding G.S.T. SI No D.S.R 9.82/1.04
2
-
82
... More
Providing & fixing G.I. pipes 50mm nominal bore. complete with G.I. fittings including tenching and refilling etc. (external work) including all meterial, T&P, labour & all taxes but excluding G.S.T
85
-
342
... More
Providing & fixing G.I. pipes 32mm nominal bore. complete with G.I. fittings including tenching and refilling etc. (external work) including all meterial, T&P, labour & all taxes but excluding G.S.T
60
-
247
... More
Providing & fixing G.I. pipes 25mm nominal bore. complete with G.I. fittings including tenching and refilling etc. (external work) including all meterial, T&P, labour & all taxes but excluding G.S.T
35
-
205
... More
Providing & fixing sand of grading zone V or coaser grade alround the G.I. Pipes 50mm nominal bore. in external work.including all meterial, T&P, labour & all taxes but excluding G.S.T
85
-
74
... More
Providing & fixing sand of grading zone V or coaser grade alround the G.I. Pipes 32mm nominal bore. in external work.including all meterial, T&P, labour & all taxes but excluding G.S.T
60
-
71
... More
Providing & fixing sand of grading zone V or coaser grade alround the G.I. Pipes 25mm nominal bore. in external work.including all meterial, T&P, labour & all taxes but excluding G.S.T
35
-
69
... More
Providing and fixing 50mm nominal bore. gate valve (with cap complete with bolts, nuts, rubber insertion etc.including all meterial, T&P, labour & all taxes but excluding G.S.T
6
-
749
... More
Providing and fixing 32mm nominal bore. gate valve (with cap complete with bolts, nuts, rubber insertion etc.including all meterial, T&P, labour & all taxes but excluding G.S.T
2
-
500
... More
Providing and fixing 25mm nominal bore. gate valve (with cap complete with bolts, nuts, rubber insertion etc.including all meterial, T&P, labour & all taxes but excluding G.S.T
2
-
428
... More
Constructing masonry Chamber 30x30x50 cm, inside with 75 class With F.P.S. bricks designation brick work in cement mortar 1:4 (1 cement :4 coarse sand ) for stop cock, with C.I. surface box 100x100x75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :including all meterial, T&P, labour & all taxes but excluding G.S.T
3
-
1195
... More
Making connection of 25 to 40 mm dia nominal bore G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :including all meterial, T&P, labour & all taxes but excluding G.S.T
5
-
394
... More
Making connection of 50 to 80 mm dia nominal bore G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :including all meterial, T&P, labour & all taxes but excluding G.S.T
3
-
771
... More
Providing M.S. foot rest including fixing with 20 x 20 x 10 cm cement concete block 1:3:6 (1 cement : 3 coarse :6 graded aggregate of nominal size 20 mm ) as per standard with 20x20 mm sqm. bar.:including all meterial, T&P, labour & all taxes but excluding G.S.T
5
-
267
... More
Providing & fixing soil, wast and vent pipe.75 mm dia sand cost iron S&S pipe. :including all meterial, T&P, labour & all taxes but excluding G.S.T
2
-
712
... More
Providing & fixing sand cost iron terminal guard 75 mm dia. :including all meterial, T&P, labour & all taxes but excluding G.S.T
2
-
197
... More
Providing & fixing C.I. tee at the inlet & outlet of septic tank. :including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
600
... More
Providing & fixing 75 mm plane sand cost iron S&S bend of required degree. :including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
271
... More
Providing lead 75 mm caulked joints to sand cost iron/ cetrifugally cast (squn) irons pipes & fitting of dia. :including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
263
... More
Supply & fixing of medium quality R.C.C. Manhole cover with frame complete.HD.-20-Circular shape ,560 int. dia.:including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
1300
... More
M.D.-10- square shape ,450 int. dia. :including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
1079
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 :including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
20691
... More
Supply and burying of 40mm dia x 4.5 metres long G.I. pipe, vertically for earthing having 12mm dia. holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No.6 to 8SWG G.I.wire in G.I. pipe upto appron (and from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) upto switch board, 30cm. square C.I.box with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects.including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
4076
... More
Supply and fixing of flush/surface mounting distribution boards 8Way SPN Cat. A with additional metal door without MCB complete in all respects.including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
1900
... More
Supply and laying of aluminium conducter,10 sqmm 2 core PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. or as directed by the Engineer-Incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. including all meterial, T&P, labour & all taxes but excluding G.S.T
10
-
292
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
1
-
3492
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tappillar tap.including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
1817
... More
Providing and fixing soil, waste and vent pipes. flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.Felxible pipe 32mm dia including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
73
... More
Providing and fixing 100mm dia centrifugally cast iron S & S pipe. soil, waste and vent pipes. flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.Felxible pipe 32mm dia including all meterial, T&P, labour & all taxes but excluding G.S.T
5
-
921
... More
Providing and fixing 75mm dia centrifugally cast iron S & S pipe. soil, waste and vent pipes. flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.Felxible pipe 32mm dia including all meterial, T&P, labour & all taxes but excluding G.S.T
5
-
794
... More
Providing 100mm lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters. including all meterial, T&P, labour & all taxes but excluding G.S.T
2
-
309
... More
Providing 75mm lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters. including all meterial, T&P, labour & all taxes but excluding G.S.T
6
-
263
... More
Providing & fixing 100mm dia pipe. M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal Including cost of cutting holes & making good the walls etc. including all meterial, T&P, labour & all taxes but excluding G.S.T
2
-
167
... More
Providing & fixing 750mm dia pipe. M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal Including cost of cutting holes & making good the walls etc. including all meterial, T&P, labour & all taxes but excluding G.S.T
2
-
165
... More
Providing & fixing 100mm inlet & 75mm outlet. cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors. including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
1072
... More
Providing & fixing 100mm dia. cast iron coller. including all meterial, T&P, labour & all taxes but excluding G.S.T
2
-
361
... More
Providing & fixing 75mm dia. cast iron coller. including all meterial, T&P, labour & all taxes but excluding G.S.T
2
-
219
... More
Providing and fixing 100mm plain cast iron S & S sanitary bend including all meterial, T&P, labour & all taxes but excluding G.S.T.
1
-
334
... More
Providing and fixing 75mm plain cast iron S & S sanitary bend including all meterial, T&P, labour & all taxes but excluding G.S.T.
2
-
248
... More
Providing and fixing 100mm bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
384
... More
Providing and fixing 75mm bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
317
... More
Providing and fixing 100x100x100mm centrifugaly cast iron single equal plain junction of required degree. including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
575
... More
Providing and fixing 75X75X75mm centrifugaly cast iron single equal plain junction of required degree. including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
405
... More
Providing and fixing 110mm diameter on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. including all meterial, T&P, labour & all taxes but excluding G.S.T
4
-
236
... More
Making khurras 45x45 cm with 110mm average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete. including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
187
... More
Providing and fixing 110mm unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. including all meterial, T&P, labour & all taxes but excluding G.S.T
2
-
181
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
40
... More
Providing & fixing 25mm dia nominal bore (medium duty) G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc.(internal work) Exposed on wall including all meterial, T&P, labour & all taxes but excluding G.S.T
10
-
247
... More
15mm dia nominal bore Concealed pipe including painting with anticorrosive bitumatic paint, cutting chases and making good the wall. including all meterial, T&P, labour & all taxes but excluding G.S.T
10
-
285
... More
20mm dia nominal bore Concealed pipe including painting with anticorrosive bitumatic paint, cutting chases and making good the wall. including all meterial, T&P, labour & all taxes but excluding G.S.T
5
-
316
... More
Painting 15mm dia nominal bore G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work. including all meterial, T&P, labour & all taxes but excluding G.S.T
10
-
9
... More
Painting 20mm dia nominal bore G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work. including all meterial, T&P, labour & all taxes but excluding G.S.T
5
-
11
... More
Painting 25mm dia nominal bore G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work. including all meterial, T&P, labour & all taxes but excluding G.S.T
10
-
15
... More
Providing and fixing 15mm nominal bore 45 cm long unplasticised PVC connection pipe with brass unions. including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
67
... More
Providing & fixing 15mm nominal bore CP brass bib cock of approved quality conforming to IS 8931 including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
371
... More
Providing & fixing 15mm nominal bore C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
475
... More
Providing and fixing 20 mm dia nominal bore gun metal gate valve with wheel of approved quality. including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
396
... More
Providing and fixing 25 mm dia nominal bore gun metal gate valve with wheel of approved quality. including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
428
... More
Providing and fixing 20 mm nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
327
... More
Providing and fixing 25 mm nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete including all meterial, T&P, labour & all taxes but excluding G.S.T
2
-
331
... More
Excavating trenches Pipes 80mm to 300mm diameter. in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, including all meterial, T&P, labour & all taxes but excluding G.S.T
6
-
225
... More
Providing, laying 100mm diameter and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. including all meterial, T&P, labour & all taxes but excluding G.S.T
6
-
216
... More
Providing & laying 100mm diameter S.W. Pipe cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design. including all meterial, T&P, labour & all taxes but excluding G.S.T
6
-
622
... More
Providing and fixing square mouth S.W. Gully trap With Sewer bricks conforming to IS : 4885grade 'A' complete with C.I. grating brick masonry chamber with F.P.S. bricks of class designation 75 and water tight C.I. cover with frame of 300 x 300mm. size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg 150 x 100 mm. size P type as per standard design including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
1640
... More
Constructing For Sewer Line brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg).With FPS bricks of class designation 75 including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
8634
... More
Transportation of mini drilling Rig machine with camp equipage to site.including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
5000
... More
Drilling of 350mm dia bore hole with lowering of tubewell assembly including all meterial, T&P, labour & all taxes but excluding G.S.T.
50
-
500
... More
Supply and fixing of 200mm dia plain rigid PVC casing pipe (10 Kg./sqcm pressure rating) and accessories.including all meterial, T&P, labour & all taxes but excluding G.S.T
30
-
600
... More
Supply and fixing of 150mm dia plain rigid PVC casing pipe (10 Kg./sqcm pressure rating) and accessories including all meterial, T&P, labour & all taxes but excluding G.S.T.
30
-
550
... More
Supply and fixing of 150mm dia plain rigid PVC slotted pipe and accessories.including all meterial, T&P, labour & all taxes but excluding G.S.T
30
-
600
... More
Supply and fixing of nylon jali around the slotted pipes complete as required.including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
3000
... More
Providing and packing of coarse sand/pea gravel around the pipe.including all meterial, T&P, labour & all taxes but excluding G.S.T
1.5
-
2400
... More
Supply of 100mm dia Johnson screen. including all meterial, T&P, labour & all taxes but excluding G.S.T
1.5
-
900
... More
Supply & Installation of 2 H.P. Solar Submersible Pump with control panel, support wire etc. complete. including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
230000
... More
Providing 3 core 2.5 sqmm PVC insulated copper conductor submersible cable. (from pump panel to submersible pump) including all meterial, T&P, labour & all taxes but excluding G.S.T
50
-
200
... More
Providing and fixing 100mm dia G.I. Pipe complete with fitting and clamps including cutting and making good the wall etc. (from submersible pump to ground level) including all meterial, T&P, labour & all taxes but excluding G.S.T
20
-
600
... More
Providing and fixing 100mm dia. brass gate valve with CI wheel of approved quality. including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
850
... More
Supply and fixing of tube well accessories i.e. well cap, clips, clamps, etc. to complete the job in all respect.including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
2700
... More
Fixing, testing and commissioning for erection and lowering of submersible pump, 100mm dia GI column pipe, 3 core 2.5 sqmm submersible copper cable upto the control panel, supporting clamps, cable clips pressure gauge, connection line and all other accessories required for the proper completion of the work.including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
3500
... More
Testing and development of tube well.including all meterial, T&P, labour & all taxes but excluding G.S.T
1
-
4000
... More
COST OF 10 K.L.TANK ON TERRACE (DSR-18.48/1.04) including all meterial, T&P, labour & all taxes but excluding G.S.T
10000
-
6
... More
Supply and fixing of Brick solling complete the job in all respect.including all meterial, T&P, labour & all taxes but excluding G.S.T
765
-
400
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements