Public Works Department Tender

S/F of DP MCB (6-32) AMP CAT-A complete in all respect.

S/B of safe Earthing Electrod T -39 ( Hot dip galvanized), Length up to 3000 mm, outer pipe 76 mm × 38 mm terminal Dia 12mm, Galvanized upto 100 micron filled with crystalline conducitive mixture (CCM) having anti corrosive & conductiv property with 50 Kgs activated soil (BFC) capable of redcing the soile resistive with good mixtre of retaining capacity.Along with 30 Cm squre C.I. frame with hinged covere & misonry housing (From electrod terminal to switch board, cost of 25x3 GI Strip will be extra)Make as approvedin UP PWD & CPRI Certified. complete in all respect.

S/F of 25 mm x 3 mm G.I. strip from earth electrode directly in the ground as requried complete in all respects.

S/L of 25 Sq mm 3½ core Aluminium conductor PVC insulated armoured sheathed cables 1100 volt grade complete in all respects.

S/L of 16 Sq mm 4 core Aluminium conductor PVC insulated armoured sheathed cables 1100 volt grade complete in all respects.

S/L of 10 Sq mm 4 core Aluminium conductor PVC insulated armoured sheathed cables 1100 volt grade complete in all respects.

S/F of 25 Sq mm 3½ core brass nickle plated compression gland for PVC insulated armoured served sheathed cable complete in all respects.

S/F of 16 Sq mm 4 core brass nickle plated compression gland for PVC insulated armoured served sheathed cable complete in all respects.

S/F of 10 Sq mm 4 core brass nickle plated compression gland for PVC insulated armoured served sheathed cable complete in all respects.

S/F of 25 Sq mm plane of pin type lug for armoured served sheathed cable complete in all respects.

S/F of 16 Sq mm plane of pin type lug for armoured served sheathed cable complete in all respects.

S/F of 10 Sq mm plane of pin type lug for armoured served sheathed cable complete in all respects.

SITC of 25 KVA , 11/ 0.433KV, outdoor type copper wound transformer with cable end box on both side, cooling - ONAN, temprature rise oil / winding-50/55 C, vector grupe Dyn11, off load tap +/- 7.5% , 6 steps @ 2.5% , No load losses and full load losses - as per IS as per direction of engineer in charge .(Make ARIVA,Cromption grives, ABB) complete in all respects.

S/L of 35 sq mm x 3 core, 11 kV grade XLPE Insulated PVC bedded, galvanised flat steel strip armoured cable conforming to IS 7098 9part - II with latest amendmennts at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks side and on top put acrous. The armouring shell be properly connected with earth conductor by clamps etc. Complete in all respect.

S/F of Steel tubular pole 9 meter long designated 410 SP-32 in 1:3: 6 cement concrete foundation including excavation back filling etc. complete in all respect.(H pole for Transformer).

S/F of 35 Sq mm. heat shrink Cable End joint kit complete in all respects. (TS No. -192/CE(E/M)-47/20-21 Dt. 12.03.2021)

S/F double walled corrugated 63mm dia, 6kgf/Sqcm HDPE pipe at a depth of 1mt. Below ground lavel complete excavation and back filling complete in all respect (TS No. -192/CE(E/M)-47/20-21 Dt. 12.03.2021)

S/B of 40mm dia × 4.5 meters long GI Pipe veatically for earthing having 12mm dia holes spaced 75mm a part drilled up to 2 Mt. From the bottem complete complete in all respect.

S/W of 2C × 2.5Sq mm Cu conductor filexible wire in existing pole complete in all respect.

Supply and erection of factory fabricated & wired matel clade dust & vermin proof floor mounting M.S. chanel basewith bottam & top cable entreis electrical control panel TPN MCCB,s (Four pole 36 KA with thermal magnatic release)switches complete with 100 Amp. incoming MCCB & 03 no 32 AMP outgoing MCCB & instrument chamber etc. Complete in all respects. The instrument chamber shall seprate & shall comprisr of flush type A meter, voltmeter,selector switch for the A meter & voltmeter, instrument fuse,C.T. etc. The board shall have 100 A electrolitc aluminium bus bar as per IS 8623 insulated with heat shrink sleeve & mounted on non hygroscopic support as CMC/DMC support with deteachable side covers and shall be complete with extension on the sides. The shall be complete with sutable cable end box, reverse entery box in case of padestal type,cable sokets,compression gland and indicating lamp on incoming etc. The job including the grounting of the board as per direction of Engineer in charge. All outing switches of 100 Amp. and above will be provided with amper meter CT and selector switch & instrument fuse etc, The switch boarb shall be fabricated with CRCA sheet with minimum thicknees of 1.6 mm/2 mm cubicle type switch boad shall be of cat A & B only complete in all respects.

S/E of stay set at least 3.5 meters away from the pole complete with G.I 19 mm x 1.80 meter long stay rod, 30cm x 30 cm x 6.3 mm anchor plate,thimble stay clamps, stay insulator,19mm x 600 mm double screw tightener ,7/4 mm G.I. stay wire etc. in 1:3:6 cement concrete complete in all respects.

Painting of the electric pole with 1 coat primer and 2 coat alu. paint complete in all respects.

S/F of anticlmbing device complete in all respects.

S/E of D clamp of 38mm ×6mm flat iron wall / roof type service bracket with bolts, nuts etc completee in all respect.

L/C numbering of poles letter writing with paint radium strip/taping size 2"×3" completee in all respect. TS NO. 52/CE (E/M)-47/18-19 Dt.15.11.2019

L/C for cutting / moulding of the road for cable pasing of required size pipe complete in all respects. TS NO. 52/CE (E/M)-47/18-19 Dt.15.11.2019

S/F of 100 mm dia midium class GI Pipe completee in all respect. TS NO. 52/CE (E/M)-47/18-19 Dt.15.11.2019

S/F of 600 mm long cross arm of 50mm × 50mm ×6mm MS iron with necessary clamps, olts nuts etc on pole completee in all respect.

S/F of 40 Amp 4 way heavy duty cadmium plated copper conector with end plate complete in all respects.