Northern Railway Tender

Commissioning of ISI marked single phase 230 V AC, 50 Hz, submersible pump set direct coupled with 2 HP motor. (Make- Kirlosker. Crompton Greeves, KSB, CRI, Shakti, Texmo)

"""Manufacturing, Supplying and fixing diagonal station name board 60x60 cm size made of 18 10 SWG M.S. sheet with porcelain vitreous enameled surface on both side with name of the station dully embossed lettering in three languages on face of board including clamping arrangement with all labour and material as a complete job"""

Supply, installation, testing and commissioning of Reducer socket 40x32 mm, Nipple 40x150 mm MS clamp, Nut, Bolt, washer, submersible cap along with fastener.

Supply and commissioning of steel rope suitable for above submersible pump set

Rebate for dismantling of existing steel structure in trusses,column,purlin made of angle flats,tee,channel,steel roof /G.I sheet Height guage, or other steel structure etc.All dismantled /released material 5 will be the property of contractor .Removing debries and other unused released material after dismantling structure and its disposal out side Railway land as per direction of engineer in charge with all labour & material as a complete job. Note - This includes the cost of dismantling staking,loading,leading and weighing of material on Dhramkata.

Rebate for dismantling of building work(i.e. brick work / stone work in lime/ cement , RCC, Cement Concrete, slab, flooring, wall, foundation/ platform wall or any type of wall / drain upto the required formation 4 level) as per direction of engineer in charge including all tools, plants, ladders, scaffolding, and other equipment required for dismantling, all lead, lift, ascent, descent, handling, rehandling , safety precaution, crossing of track or any other obstructions and removing the dismantled material out of railway premises ( except the rails which will be the property of railway. )

Supply, installation, testing and commissioning of 1.25 inches PVC pipe heavy duty attached with submersible pump

"Providing and fixing safety fencing with RCC post and GI barbed wire type II , IS : 278 line wire 2 nos 2.5mm dia each and point wire 2.5mm dia at 150mm centre to centre distance. The GI barbed wire shall be fixed to RCC post in three horizontal rows, at specified interval, and two diagonal. The RCC post shall be of 100mm x 100mm size at horizontal distance of 5m c/c with concrete mix of 1:1-1/2:3 ( 1 cement: 1-1/2 coarse sand: 3 stone chips of 20mm of nominal size. These RCC posts shall be painted with white and red band alternately at the distance of 300mm, as per approved drawing or as directed by engineer in charge. The height of RCC post shall be 1.5 metre above formation level and depth below formation level shall be 450mm with same size. This post shall be embedded in the concrete block of size 600mm x 600mm x 600 mm with concrete mix 1:3:6 ( 1 cement: 3 coarse sand: 6 stone chips of 40mm nominal size) as per approved plan for all heights and 22 depths including cost of shuttering , centering scaffolding, uncoiling, straightening, cutting, placing and keeping in position steel reinforcement including cost of binding wires, mechanical mixing and vibrating of concrete, curing of concrete for a specified period, use of admixtures, if required, rendering and finishing the exposed surfaces of concrete with carborandum stone, with all labour and material as a complete job as per specifications and conditions of contract (cement shall be arranged by the contractor and payment shall be made separately under relevant USOR-10 items). " "The cost of steel reinforcement is included in this item for which no extra payment shall be made to contractor. RCC post and barbed wire fencing shall be dismantled by the contractor at his own cost on completion of work and dismantled material i.e. barbed wire fencing is property of contractor. The fencing work shall be maintained during the currency of work after doubling is commissioned. Note:- 1. Maximum 80% payment will be made in on account bill after providing and fixing of fencing as described above. 2. Remaining 20% amount shall be released to the contractor after completion of work.

Peagraval / Coarse sand (Item Directory - Not Applicable)

"Manufacturing, Supplying and fixing station name board of size 2.44x0.90 mtr. fabricated out of 2SWG black iron sheet welded between the two angle iron size 40x40x5mm on either face of the sheet with three no. holes 12mm dia in each vertical portion of the frame for fixing to the post of size 125x75mm will be provided 9 for fixing board with post. The post shall be supplied with the board, with heel of any section welded to bottom of the post, Six nos. MS bolts and nuts 12x40mm will be provided for of board with the posts. in three languages as per desired pattern and height/size etc as a complete job including concrete work in fixing over platform. The post and frame shall be painted with one coat of primer and three coats of anamel paint of approved quality and shade. Station name board shall be painted with one coat of primer and three coats of golden yellow paint of approved quality on both sides & shade including lettering work."

"Manufacturing, supplying & fixing of prefabricated RCC coping stone of size 530mm x 1125mm x 100mm thick as per top face designed and approved by site Engineer with M- 30 grade RCC with 8 mm dia. tor 7 steel at 150mm c/c both ways and manufactured by vibro compaction process using jointless FRP/GRP steel moulds of required size, shape & design. The item includes cost of cement, reinforcement, transportation etc. as a complete job. (Note: Under layer of cement mortar to be laid as per site conditions & should be paid for separately)"

Boring of 4" diameter tube well

(b). 40 mm dia.

Supply, installation, testing and commissioning of 8 inches heavy duty PVC pipe wrapped with net

Supply, installation, testing and commissioning of D.O.L type air cooled AC/3 category heavy duty starter with overload relay conforming to IS 13947 (pt4)1993.Make of control Panel- M/s Mysore Electrical 19 Industries Ltd., M/s Associated Engineers, M/s Schneider Electric India Pvt. Ltd., M/s Bhartiya Cutler Hammer Ltd., M/s Siemens India Ltd., M/s Andrew Yule Co. Ltd, M/s G.E.C. Power Control India Pvt. Ltd., M/s Unilic United Electric Industries, M/s JSI Industries Ltd., M/s Havels India Ltd., M/s Controls & Switchgear Contractors Ltd. (Pump starter to be placed inside suitable metallic enclousre grouted near pump set or at suitable location depending upon the site)

Supplying, Laying and fixing PVC conduit pipes of following sizes for electrical wiring conforming to relevant IS specification including earthing with 14 SWG GI wire and provision of junction boxes of appropriate 1 size and requisite no. of ways (Max 4 ways) and also PVC bends including cost of material, binding and positioning and holding the conduit in RCC, cutting chases in brick wall and making good including provision of GI fish wire inside all conduits including all incidental work at all height/depth as per approved drawing or as directed by the Engineer in charge with all labour and material as a complete job. (a) 25 mm dia.

"Providing, hoisting & fixing in position M-30 grade reinforced cement concrete in Precast standard platform walls section as per standard drawing no. NRHQE (P) Plan no. P-209- MS/2014/R1 including RCC work as per approved mix design with coarse sand and stone aggregate of 20mm and down gauge in all work including setting in cement mortar 1:3 ( for height and depths including the cost of centring, shuttering, hoisting ,placing & fixing in position, compaction of concrete by electrical/mechanical vibrator, providing and using admixture in recommended proportion as per IS 456, IRC-112, IS-9103 & concrete bridge code applicable as per approved mix design with minimum cement content, maximum water cement ratio and slump as specified in special conditions if any produced by RMC plant/ automatic computerized/ electronic batching plant and placed 6 using concrete pump including designing of concrete mix, finishing the exposed surface of concrete, curing of concrete as required in IRC-112, including all lead by transit mixer (crossing of stream, nallahs, railway tracks, level crossings or any other obstruction such as traffic jam etc.), lift, pumping, ascend, descend, loading, unloading, handling, wastages if any, cost of all safety works and safety precautions with all labour, arrangements for cold weather and hot weather concreting as applicable, taxes and royality etc. " as a complete job as per specifications and directions of engineer in charge. Nothing extra will be paid on any account. The rate will also include cost of cement, admixture (plasticizer, super plasticizer, or retarder etc.) as per approved mix design. (Payment of reinforcement steel including cutting, straightening, hooking, bending, binding, placing keeping and maintaining in position including cost of binding wire will be arranged by contractor and payment will be made separately under relevant items). Work will be executed as per Indian Railway standard specifications applicable for RCC/PSC works.

"""Providing and fixing precast tactile 300x300x30 mm in yellow colour jointed with neat cement slurry mixed with pigment to make shade to tiles including cleaning etc complete on 20 mm thick bed of cement mortor 1:4 precast tactie 300x300x50 mm"