Northern Railway Tender

RCC

Supplying Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars

Extra over item 051010 & 051020 for brick work in superstructure beyond plinth level upto floor two level :

Structural steel work welded in built up sections, trusses and framed work, girders, stagings, racks, etc including cutting, bending, straightening, hoisting, fixing in position, including applying a priming coat of approved steel primer, complete - upto 6m height above GL In RSJ, tees, angles and channels

Structural steel work welded in built up sections, trusses and framed work, girders, stagings, racks, etc including cutting, bending, straightening, hoisting, fixing in position, including applying a priming coat of approved steel primer, complete - upto 6m height above GL In flats, plates , round or square bars

Providing and laying plain cement concrete flooring of specified thickness with mix design concrete over firm, well prepared and well compacted bed including provision of designed expansion joint & finishing manually or mechanical trowel ling & vacuum dewatering complete. Expansion joint to be paid for separately. M-30

Finishing Masonry

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work Each of 1121250 2000.00 1.06 2120.00 28.21 2718.05

Lettering with "Synthetic Enamel" paint (two coats) of approved brand and manufacture

Providing and fixing medium grade G.I. pipes complete with G.I. fittings including trenching and refilling etc. External Work 100 mm dia. nominal bore

Providing and laying non-pressure NP3 class (medium duty ) R.C.C. pipes including bends etc with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement: 2fine sand) including testing of joints etc. complete up to 800mm dia. 300mm dia. R.C.C. pipe

Bridge Works Miscellaneous

Road & PF Works

Placement of precast RCC box segments with the help of road crane adequate capacity at desired 19 location carefully by lifting and placing method during traffic and power block with all labour and material tools and plants machineries and preparation of surface as directed by Engineer - in- charge including filling of joints with by epoxy and sand including cost of all incidental material, labour tools and plants epoxy material and sand and machinery required for this work with all lead, lift, ascend, descend, crossing of track, nallah and obstructions as a complete job.

RCC of grade M-30/M-35/M-40 or any other design mix casting as per approved drawing with coarse sand and graded Stone aggregate of 20mm MSA in all component of RCC box, Precast slab under box for all height or depth including of submission and getting approval of design mix including provision of masonry staging, centering, shuttering de- shuttering weight batching, cutting strenghtening, hooking, bending, binding and reinforcement including the cost of binding material wire, admixture ( as per condition of contract ) rate shall also be inclusive of mechanical 20 compaction of concrete , mechanical mixing of concrete curing of concrete as per codal provision including the cost of dewatering , bailing out of water lowering the water table whenever required including provision of facia work as per direction of Engineer - in- charge including the finishing the exposed concrete with carborandom stone painting the exposed concrete with cement paint 03 coats providing and fixing PVC conduit pipes fuction boxes of required size etc.including all transporting leading, lifting ascends , descends , loading, unloading, handling, re-handling crossing the stream , nallahs, railway track , L-Xing cetc.or any other obstruction cost of all safety precautions all labour and material as a complete job. NOTE:- Cement and Steel reinforcement will be arranged by contractor and payment shall be made separately under relevant items of SSOR 2010.

Item rate for removing existing ballast , ballast cushion from track and stacking at site, putting and 22 packing same after screening in track after completion of the work , or as directed by engineer-in-charge , including all labour, materials, tools, plants, all leading, loading, unloading, lifting, screening, incidental works etc., complete with manual & mechanical method. The rate shall be complete item rate, so nothing extra shall be paid to affect this item hat socver the case may be.

Complete item rate for making Arrangement of light to work in night hours as and when requires with generator of 600 VA including all necessary lighting , cable, fuel, operator, transporting of all men and machines all taxes etc, So nothing extra will be paid except the accepted rates whatsoever the case may be. Payment shall be made for actual working hours of generator.

Item rate for providing and fixing 150 GSM Polythene tube sheeting of virgin ( superior) quality for wrapping around the LHS box & base slab segment joints with all labour & material including leading to site with all taxes etc. So noting extra shall be paid to affect item whatsoever the case may be.

Complete item rate for preparing completion plan of work done by the Contractor, on latest version of Auto CAD software to the prepared to the scale as per approved plan or as specified in IRWW by showing all the details of work done by the Contractor . Prints shall be submitted on tracing paper of gateway or equivalent make,90-100 micron thick 26 along with Two sets of CD, Containing the soft copy of all drawing prepared by Contractor. Rate shall be inclusive of all labour, material, Taxes etc. So nothing extra will be paid except the accepted rate. Note:- 1. Drawing shall be prepared in the size as per requirement of the site to suit the proper scale and payment shall be made in running Mtr. With Width varies from min. 297mm To max. 914mm 2. Drawing shall be containing all the details of existing building / shed, land scapping work, washing line with Track etc. The same must be submitted along with final bill.

Item rate for manufacturing, supplying and fixing of boards in size as required at site, made out of 2 mm thick Aluminium alloy sheet conforming to IS:- 736 in size and shape etc. as per annexure 8/4 of para 807 and 808 of 27 IRPWM with back support of angle iron of 25x25x3 mm. The entire face of the wood shall be covered with yellow high intensity retro reflective encapsulated type sheeting with heat lamp vacuum applicator machine. The world W/L or W shall be cut out of black scotchal film & provided on base sheet with HLVA process. NOTE:- any type of board like speed indicator board , LC board, W, W/L board etc. will be required under this item. Board shall be fixed by CC 1:3:6 of 20x20x40 cm foundation on firm ground.