Northern Railway Tender

Annual maintenance charges for 5th year 1

GST @ 18 %

Supply, installation, commissioning and prove out of CNC Tandem Under Floor Wheel

GST @ 18%

Supply, installation, commissioning and prove out of CNC Tandem Under Floor Wheel

GST @ 18%

Supply, installation, commissioning and prove out of CNC Tandem Under Floor Wheel

GST @ 18 %

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zoneIII) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources).

All Works up to Plinth level Concrete of M25 grade with minimm cement content of 330 kg /cum

All Works up to Plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone- III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

All works above plinth level upto floor V level Concrete of M25 grade with minimm cement content of 330 kg /cum

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing & fixing two aluminum windows-Powder coated

12 mm cement plaster of mix : a) 1:6 (1 cement: 6 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix: a) 1:6 (1 cement: 6 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix: b) Providing & applying PoP putty of 2 mm thk

Distempering with oil bound washable distemper of approved brand and manufacture

Roofs of buildings and side cladding, gable end cladding etc all complete 1

GI Gutter 1

Rainwater Downtake 1

Boulder/Rubble Solling - 200 mm

Track work inside shed

Finishing walls with water proofing cement paint of required shade : a) New work (Two or more coats applied @ 3.84 kg/10 sqm).

Applying one coat of water thinnable cement primer of approved brand and

GST @ 18 %

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out

All Works up to Plinth level a) Concrete of M25 grade with minimum cement content of 330 kg /cum

All works above plinth level upto floor V level a) Concrete of M25 grade with minimum cement content of 330 kg /cum

Centering and shuttering including strutting, propping etc. and removal of form for : a) Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for : b) Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for : c) Columns, Pillars, Piers, Abutments, Posts and Struts

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: a) Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing & fixing two aluminum windows-Powder coated

12 mm cement plaster of mix : a) 1:6 (1 cement: 6 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : a) 1:6 (1 cement: 6 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : b) Providing & applying PoP putty of 2 mm thk

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : a) Water thinnable cement primer.

Finishing walls with water proofing cement paint of required shade : a) New work (Two or more coats applied @ 3.84 kg/10 sqm).

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings

Roofs of buildings and side cladding, gable end cladding etc all complete 1

GI Gutter 1

Rainwater Downtake 1

Boulder/Rubble Solling - 200 mm

Total Cost of Track work inside the Shed 1

Track work outside the Shed

GST @ 18 %

Supply, testing and commissioning of XLPE insulated PVC sheathed armoured underground aluminium cable of graded 1.1KV for working voltage upto 1100 volts conforming to IS

Supply, testing and commissioning of XLPE insulated PVC sheathed armoured underground aluminium cable of graded 1.1KV for working voltage upto 1100 volts conforming to IS

Supply, erection, testing & commissioning of 60 W, LED based Roadway Light Fitting complete with lamp including bracket suitable for mounting on the wall.

Supply, erection, testing & commissioning of 1200 mm sweep BLDC ceiling fan

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess or in pipe for connections etc. as required

Supply and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supplying & fixing 63A FP MCB

Supply, erection, testing & commissioning of Steel such as MS Channel, Flat, Angles

General Electrical works

GST @ 18 %

Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of following LT Panel, fabricated out of 14SWG CRCA sheet steel, power coated for load bearing member and 16SWG CRCA sheet steel for non-load bearing member, in cubicle compartmentalized modular construction complete with supporting rigid structure, interconnections, aluminium bus bar 1 strip with heat shrinkable colour coded, minimum current density of bus bar 1.0 A per Sq.mm,identification on all breakers & MCCB to indicate the area they serve. Degree of protection IP 42, earthing hinged doors with 2.5 sq. mm tinned braded copper wire, free standing floor mounted with removable Gland Plates on top & bottom of the panel, all mounting plates shall be GI sheets. Panels shall be treated with all anticorrosive process before powder coating as per specifications and final approved shade. Galvanised hardware with zinc passivation shall be provided for all distribution panels. Panels shall be suitable for 415V, 3 Phase, 4 Wire, 50 HZ Supply system. 2 SET OF -Incoming - 630 amps 4P MCCB 50 KA WITH micro processor based release, & complete in all respects WITH .i) 1 Nos. 0-500 Volts, 96 sq.mm voltmeter with protection 6A MCB and selector switch. ii) 1 Nos. 630 Amps, 96 sq.mm ammeter with630/5A CT's and selector switch. iii) 1 Set R Y B , ON/OFF/TRIP indicating lamps with protection 6A MCB 1 SET OF - Incoming - 630 amps 4P on load changeover switch 1 set of 800 Amps, 415 volts, 3 phase, 4 wire colour coded aluminium TPN bus bar, after taking all derating factors. 1 NOS - O/G -630 amps TPN MCCB 36 KA WITH THERMAL RELEASE , ON/OFF/TRIP indicating lamps & auxiliary contacts required for necessary (UFWL I/C) 4 NOS - O/G -125 amps TPN MCCB 36 KA WITH THERMAL RELEASE , ON/OFF/TRIP indicating lamps & auxiliary contacts required for necessary ( SHUNTER-CHARG-1, 63A PLUG SOCKET - 2 NOS, SPARE- 1NO) 6 NOS - O/G -63 amps TPN

Supply, erection, testing & commissioning of 60 W, LED based Roadway Light Fitting complete with lamp including bracket suitable for mounting on the wall.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess or in pipe for connections etc. as required

Supply and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supplying & fixing 63A FP MCB

Supply, erection, testing & commissioning of Steel such as MS Channel, Flat, Angles

General electrical Work (power Suppy Cable (3.5 core x 240 sqmm AI armoured))

GST @ 18 %