Northern Railway Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Northern Railway - NR Tender
Electrical and Electronics
Electrical Works
Ireps
Opening Date28 Feb 2025
Closing Date1 Apr 2025
Tender Amount₹ 6,53,66,959.66
Costs
EMD
₹ 4,76,800Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Provision Of Ibs In Prayag Area (pfm-swe & Swe-mem) Of Lucknow Division Of Northern Railway.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
106-Sig-Tender-26-2024-25-LUCKNOW-NR-DIVISION-S AND T/NORTHERN RLYTender No
106-Sig-Tender-26-2024-25Tender Authority
Northern Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Design and preparation of wiring diagram for IBS on the basis of approved interlocking plan, typical circuit diagram and as per Railway practice and latest rules prescribed by the Railway and obtaining approval of the competent authority. Preparation of locking tables and dog charts if 04 required to suit colour light signalling plan and obtaining the approval of the competent authority. Drawing shall be supplied as per following:- (i) Supply of 6 copies of completion set of superior quality paper, laminated, properly bound in steel clip jaw file with cushioned cover. (ii) Software backup of complete set in the form of Pen drive.(iii) The complete set of tracings.(iv) Design through CAD.(v) Drawing in A-3 size paper & plans in bigger size (6 sets).
2
43877
87755.62
... More
Supply, writing and fixing of description boards made of ply 6mm thick with white sunmica glued over its surface and 1"x1" wooden button fitted all around on the rear and having aluminium angle size of 25.4mmx25.4mmx3.15mm on all four sides as per instruction of Engineer at site. All the materials to be supplied by contractor. Inspection by Consignee for supply portion
-
-
5
... More
Supply of CLS Signal post 3.6 Metre and ladder 3.5 M with bases ( 140mm dia, tubular) and platform confirming to IRS:S-6-81 and Drg. No 2011/M and for the ladder RDSO Drg. No. SA- 23153(adv)or latest Inspection: Consignee
12
18293
219525.6
... More
Supply of colour light signal unit 3/4-Aspect complete without lamp holder, lamp, lense and signal transformer as per IRS:S-26/64 & RDSO Drg. No. SA-23002 A/M(Adv) or latest with hand cuff lock 2 No. Inspection: Consignee
12
19990
239883.96
... More
Casting, concreting and curing of foundation of main signal as per Drg. No. NR/S&T/Con / 2.1/97 or latest. All material such as Anchor bolts cement, sand, aggregate to be supplied by the contractor.
8
9398
75188
... More
Fixing of 3/4-aspect of colour light signal CLS surface base, bolting on the foundation. Erection of CLS post with signal unit on the top or on an offset bracket and fitting ladder and guard to the post at the top Concreting ladder base and embedded into the ground with supporting bracket in the middle. Blanking of the ladder for a distance of1 feet between the height6'9"and 7'9"from the rail level by MS angle and MS sheet 0.6mmthick wherever required. This includes provision of wooden 09 (Sal) cross arm 1Mx1M for CLS unit prior to the commissioning, fixing of AC /DC lit LED Signal unit and hood on CLS unit, wiring the CLS unit and fixing the signal. Elevation and distance of foundation from track shall be in accordance with schedule of dimension for Indian Railway published by Government of India &approved Drawings. All items for the above work except items mentioned in Annx B-2 shall be supplied by the contractor including following items. (i) U bolt for offset bracket. (ii) Wooden cross arm1Mx1M (iii) MS sheet and MS angle for blanking of ladder (iv) Wire mesh guard, U-lock for unit , nuts and bolts etc. for the following. (v)Supply and fixing of Signal Number Plate (Retro refractive type) with complete fittings as per standard railway practice.
8
4407
35258.08
... More
Fabrication, Supply and fixing of retroreflective P/G/C/IB markers with complete fittings 10 as per approved Drg. No. NR/S&T/CON/6.2/97. All material required for the job such as MS sheet, MS angle, Nut and bolts, paint and painting materials will be supplied by the Contractor. The P and G markers shall be as per Drg. No. S 23456 (Adv) & SA 23477 (Adv) respectively. Inspection by- Consignee for supply portion.
20
918
18374.2
... More
Casting, concreting, curing of foundations of size (400mmx300mm) at surface and 1000mm deep and erection of retroreflective SLB/BSLB/SB/ calling on boards/Goods Warning 11 Board/Passenger Warning Board as per Drg. No. NR/S&T/CON/7.4/97 or latest & provisions of SEM. It includes supply of retroreflective SLB/BSLB/SB/ calling on boards/Goods Warning Board/Passenger Warning Board. The SLB/BSLB shall be as per approved Drg. No.SA-2373 or latest. Calling on board should be as per DRG NO: NR/S&T/D&D/01/2022 or latest. Inspection by : Consignee for supply portion
10
11218
112182.1
... More
Provision of protective screen on Signals when they fall within two meter from live 12 conductor by expanding metal size 20mmX60mm (strand 3.25mm wide and 1.6mm thick) as per instructions at site by Engineer Incharge. This includes supply of all materials including earth electrode and earthing arrangement. Inspection by- Consignee
6
7337
44023.14
... More
Supply of Relays - Miniature, Plug-in Type, M to C, DC Neutral Line, Non AC Immunised Relay, Style QN1, 24 V DC, 8F-8B Contact, Code ABCDF/ABCDE Spec: BRS:930 ; IRS S 34 ; IRS S 23, STR: SIQ 0420 Ver.1or latest. Inspection : RDSO
375
3965
1487163.75
... More
Supply of Relays - Miniature, Plug-in type, M to C, DC Neutral Line Relay, 24V DC 1000 Ohm , ACI Style- QNA1K, 6F-6B Contact, Code CDEKY/CDEKY Spec: BRS:931A & STs/E/Relays/UEA/PI dtd 30.05.97 Annex II & IRS:S-23@44"38<44@ STR: SIQ 0420 Ver.1 or latest. Inspection : RDSO
45
6502
292599.45
... More
Supply of Relays - Miniature, Plug-in Type, M to C, DC Neutral Line AC Immunized Relay, Style QNA1, 24 V DC, 8F-8B Contact, Code ABDGH/ABDFH Spec: BRS:931A ; IRS S 34 ; IRS S 23 ;IRS S 60-78 , STR: SIQ 0420 Ver.1 or latest. Inspection : RDSO
90
4458
401224.5
... More
Supply of Reays - Miniature, Plug in Type, M to C, Tractive Armature, AC Immunized, DC Biased Contactor Relay, Style QBCA1,2HF-4B Contact, 24 V DC, Code BCEJK Spec: BRS:943 ; IRS S 34 ; IRS S 23 ;IRS S 60-78, STR: SIQ 0420 Ver.1 or latest. Inspection:- RDSO
-
-
16
... More
Supply of Relays -Miniature, Plug-in Type, M to C, DC Neutral Line Magnetically Latched Relay, Style QL1, 24 V DC, 11F-4B Contact, Code ABDEG Spec: BRS:935A ; IRS S 34 ; IRS S 23, STR: SIQ 0420 Ver.1 or latest. Inspection:- RDSO
210
5994
1258765.2
... More
Supply of Relays- Miniature, Plug-in type, Tractive Armature, M to C, Universal AC lamp 18 proving relay, Style QECX, 4F-4B Contact, for 110 V AC LED Signal Lamp Code ABDHK Spec: BRS:941A,STS/E/RELAYS/AC LIT LED SIGNAL/09-2002 Amdt1, IRS S-23 & 34, STR: SIQ 0420 Ver.1 or latest. Inspection-RDSO
45
4515
203182.2
... More
Wiring of relays in relay room/relay huts as per approved wiring diagrams. All material required will be supplied by contractor including indoor cables and wires of 1x1, 1x0.6, 3/.029, 16/0.2, 19 40x0.6, 40x1, 60x0.6, 60x1 dia. of copper conductor as per NR practice conforming to latest IRS S76/89 (Amd.3) or latest available specifications .This also includes soldering, dressing, bunching, lacing, fixing of relay bases etc. and provision of LED indication box of vital relays in relay room if required and provision of potential free contacts of all relays on tag block for data logger as per instruction of site Engineer.
505
543
274659.4
... More
Fabrication, supply and fixing of relay racks of size 2200mmx690mm (as per approved Drg. No.NR/S&T/CON/4.3/97A) made of angle iron size 45mmx45mmx6mm along with outer frame made of angle iron size65mmx65mmx8mm, fitted with M.S. squares bars duly galvanized, 20 descriptions strips to accommodate Plug-in-type relays/groups/Point contractor units/ECRs/HMUs. All fixing material like antilting device, hylam sheets if required, bolts &nuts, washers, insulators, shoe, angle irons, flats, L-bolts, Catenary wires and cement concrete etc. will be supplied by the contractor. This includes cleaning, priming by red oxide, painting & description etc. with ISI mark paints. On site inspection by Site Engineer
11
19572
215300.91
... More
Fabrication, supply and fixing of cable termination board of size 2200mmx900mm as per Drg. No. NR/S&T/CON/ 4.1 /97-A made of angle iron of size 45mmx45mm x 6mm along with outer frame made of angle iron of size65mmx65mm x 8mm duly fitted with Bakelite sheet of size6mm thick. This also includes fixing of ARA terminals & fuse bases. supply of negative copper bus bar. Supply and fixing of hard wood of size70cmx 25cmx 4cm in the back for jamming of cables. 21 Scaffolding /cable carrier made of angle iron of size 35mmX35mm X 6mm and flat of size 25mm X 5mm to be fabricated and supplied as per instructions of site Engineer. Separation between two flats will be250mm or lessas per site requirements. All materials required for scaffolding/ cable carrier to be supplied by the contractor. All the fixing materials like bolts, nuts, washers, Insulators, shoe, angle irons, flats, L-bolts, cement, sand and concretes etc. will be supplied by the contractor. This includes cleaning, priming by red oxide, painting & writing of description etc. with ISI mark paints of Asian /Burger//Nerolac or similar make. with IS specfication-15489:2004. On site inspection by Site Engineer
11
22775
250531.82
... More
Fabrication, supply and fixing of scaffolding/ cable carrier of angle iron of size 35mmx 35mm x 5mm and flat of size 25mmx3mm as per instructions of Engineer at site. The space between 22 two flats shall be 25cm or less as per site requirements . All material required for scaffolding / cable carrier to be supplied by contractor. All fixing material like bolts nuts, washers, insulators, sand , cement & concrete etc, will be supplied by the contractor. This also includes insulating flat strips, cleaning, priming by red oxide, painting by ISI mark paint and writing of description of relays by ISI mark paints. Inspection-Consignee for supply portion
100
575
57516
... More
Supply of electric fuse complete with fuse block (base) for Railway signalling non 23 deteriorating type low voltage fuse assembly 2Amp/4Amp/16Amp. to suit Specn. No. IRS: S-78/2006 or latest and fuse block made of PBT/Polycarbonate as per IRS:S-75/2006 (Rev.2 & Amd.2) and drg no. 23748 (IRS), Alt-4 or latest. Fuse block shall be suitable for round head type fuses. Inspection : RDSO for both Fuse and Fuse block.
600
192
115278
... More
Supply of terminal block M-6 (ARA terminals) Block 25mm centre small M-6terminal made of PBT as per IRS spec. No.IRS-S-75/2006(Rev.2) or latest & IRS drawing No.SA-23741/A (Alt. 4) or latest. Inspection: RDSO
18000
74
1335420
... More
Termination of all the cores of all type of outdoor cables after its laying on both end. 25 This also includes preparation of test report for core to core and core to earth on prescribed proforma for each core of the cable separately. This also includes dressing and lacing of cables on both ends. Proforma for testing and material for lacing to be supplied by the contractor.
4500
12
56655
... More
Supply of 4 conductor dis-connect terminal block for test and measurement 0.8 sq.mm-2.5 sq.mm centre marking with test slot for test plug 2mm/0.079IN and 2.3mm/0.091IN carreir rail DIN 35 front entry cage clamp connection Grey wago or similar as RDSO/SPN/189/2004 Rev. 3.0 or latest. Material to be supplied from RDSO approvedfirm. Inspection : RDSO
-
-
26
... More
Supply of End and Intermediate Plate 2.5mm/0.098 in Thick Wago or similar as per RDSO/SPN/189/2004 Rev. 3.0 or latest. Inspection : Consignee
2400
19
46176
... More
Supply of screw less end stop 10mm/0.394 in wide carrier rail DIN 35 Grey Wago or similar as per RDSO/SPN/189/2004 Rev. 3.0 or latest. Inspection : Consignee
120
16
1940.4
... More
Supply of Steel carrier Rail 35x7.5mm/0.039 in thick unslotted, yellow with Chrome Wago or similar as per RDSO/SPN/189/2004 Rev. 3.0 or latest. Inspection : Consignee
240
152
36518.4
... More
Excavating and refilling of trench to the level of ground with rammed earth asper Drg. 30 No.(NR/S&T/Con/1.1/97A) so as not to form a drain 0.3 Mtrs wide & 1mtr deep on both side of the station alongside the track. It shall conform to the safe distance as per signalling and cable plan in all type of soil, it also includes clearence of roots of trees and bushes.
61000
50
3092090
... More
Excavating and refilling of trench 0.3 Mtr. Wide and 0.8Mtr. Deep on pitched/Stone/bricks paved surface, road crossing/platform etc.to suit Railway electrified area and restoring the surface to its original conditions.
600
141
84606
... More
Supply and laying of 2nd class bricks in the trench and laying as per Drg. No. (NR/S&T/Con./1.1/97A) and as per instruction of the site Engineer
401600
6
2666624
... More
Supply & fixing of Medium class GI pipes 100 mm dia (4.5 mm thickness) as per IS 33 1239 ( Part 1 ) : 2004 with coupling on culverts bridges as per Drg. No. NR/S&T/CON/1.4/97 or latest) or at any other locations as decided by Site Engineer. It includes supply of all material required for fixing arrangement. Contractor will also supply flexible/corrugated HDPE pipe at the end of GI pipe to protect the cables from sharp edges and sudden bends. Inspection: RITES for supply portion
1300
1180
1534299
... More
Supply & installation of HDPE Double Walled Corrugated (DWC) Pipe as per RDSO Specification No. RDSO/SPN/204/2011 Ver. 1.1 With Amndt-1 ( outer dia 120 mm 6m st. length with 34 one coupler for every 6m length). This include brick work and other arrangements required to secure the pipe as per specifications, drawings and stipulations of tender documents and as per approved cable route plan including road crossing/platform/track crossing and for bridges and culverts etc. Inspection by- Consignee for supply portion.
450
551
248197.5
... More
Boring and trenchless cabling along with supply and insertion of DWC self lubricated pipes as per RDSO Spec no. RDSO/SPN/204/2011 Ver 1.1 or latest of 120 mm nominal dia in the bore at the depth of 1.4 meter to 2.1 meter from formation level (level of earth below ballast) as per drawing and as directed by Engineer Incharge by trenchless technology for laying of signalling /telecom/power cable under track /culvert etc. cable laying covered separately. Inspection-RITES for Supply of DWC/HDPE pipe. The following required coupling arrangement should also be supplied: 1. Suitable snap fit couplers with rubber O ring, 2. Spacers, 3. Tees. 4. Bend. 5. End Cap(1 no. =6mtr 35 ,Straight pipe). (A) Thecost shall include horizontal boring through any intermediate obstruction, either natural or man made or any boundary etc. (B) The rate is inclusive of all the materials equipment and labour required for during trenchless horizontal boring under the railway track. Nothing extra shall be admissible on any account than the rate quoted above. (C) The Pipe is to be laid under railway track/road /culvert. All necessary arrangement are to be provide and all precautions are to be end is not deviated from the horizontal level line by more than 250mm in horizontal and vertical direction. (D) The rate shall be inclusive of direction and protection of under ground utilities encountered during boring. (E) The payment for boring shall be made only when DWC/HDPE pipe are laid in the bore.
1000
1488
1488330
... More
HDD boring and trenchless of 120 mm bore dia without HDPE pipe for laying of Signalling/Telecom/Power cable under Track/Road/Culvert etc. Cable laying is covered separately.
1800
961
1730628
... More
Laying of signalling/Telecom/power cables of different sizes as per attached guidelines (Drg. No.(NR/S&T/Con/1.1/97A1) or latest on signalling cable laying and as per cable route plan approved by Railways through trenches, RCC pipe, DWC pipe, GI pipe etc and meggering of cable before and after its laying of all type of outdoor cables. Contractor have to transport cable from any store of LKO division to site carefully. Meggering to be done for eachdrum separately. Meggering sheets to be supplied and filled up by contractor and submitted to Railways, as per instructions by Consignee.
-
-
37
... More
Laying of HDPE duct in the trenches including in HDD/Manual Boring and supply pulling of Nylon rope through is at different places as per direction of Engineer Incharge/Site Engineer. It 38 includes Supply of HDPE duct outer dia 40mm & inner dia 33mm as per TEC Gr No. G/CDS-08/02 Nov /2004 with latest amendment with end cap to be provided along with the drum at both ends. (RDSO Spec No. RDSO/SPN/TC/45/2013 Rev.2.0) with latest amendments. Inspection by- RITES for supply portion 39
75
77416
5806260
... More
Blowing/Drawing of OFC/Power cable into HDPE pipe.
75
11003
825287.25
... More
Supply, Installation, wiring, testing and commissioning of SPT (Half Duplex) at IBS Location and adjacent stations. Each set shall comprise one no. of signal post telephone SPT) master unit (Which shall be installed on IBS post) along with one no. of slave unit to be installed in SM's office 40 suitable for working on 24V DC and suitable for 25KV RE area as per instruction of site In-charge, ACES make or similar. Note: The contractor shall ensure that there is no interference in communication between the master and slave unit owing to power hump due to RE Induction. Cable from IB signal unit to the cable termination Board in SM's Room/Relay Room will be provided by Railway. Inspection : Consignee for supply portion.
12
13503
162044.64
... More
Supply, Installation, testing & commissioning of Earth Leakage Detector (8 Channel) as 41 per RDSO Spec No. RDSO/SPN/256/2002 or latest. It should be installed in 19'' rack of standard size. (Required cables/wires will be supplied by Railways) Any other miscellaneous materials like clamps, fixing accessories etc shall be supplied by the contractor. Inspection - RDSO for supply portion
3
188511
565535.19
... More
Supply of single apparatus case steel RE with 'E' type locks and key ward No 42 & handle as per Drg No. RE/S&T/ALD/SK/219/82 & 221/82 with Alt.B . Inspection by- RITES.
80
28007
2240584
... More
Supply of apparatus case steel RE half with 'E' type locks and key ward No 42 & handle as per Drg No. RE/S&T/ALD/SK/220/82 & 221/82 with Alt.B. Inspection by- Consignee
12
21647
259770
... More
Casting, concreting and curing of foundation and erection of apparatus case single as 44 per Drg. No.NR/S&T/Con./2.7/97. A layer of 3mm of Bitumin compound has to be provided between foundation and location box to prevent ingress of water in the base of location box. All material such as cement, sand, aggregate & anchor bolts shall be supplied by the contractor. Contractor is required to execute all type of repair work of foundation if required during inserting the cable for termination.
64
7476
478524.8
... More
Preparation of App. Case single involving wiring of relays: Preparation & fixing of bakelite hylum sheet 910x800x6mm and bakelite shelf 900x450x25mm duly fixed by angle iron piece of different size inside all the app. Cases. Hylum board shall be fixed on an angle iron frame of 25mmx25mmx3mm. Angle iron frame will be fixed in location boxes secured by nuts and bolts. This includes fixing of fuses, ARA terminal, Q series relays and other type relays on square bars fixing and jamming of cables with 2 inch thick salwood plank provided at the bottom. This will include opening, 45 pasting and jamming armour of each cable in the hole drilled separately for each cable through the salwood plank and all cable entry points on location boxes, location huts, JBs relay room/battery room to be closed with suitable masonry Works covered with sand and plastering. Wiring description for terminal drawing of circuits, inside app. Case. Painting from out side as well inside with red oxide and aluminum paint is covered separately. Size of lettering will be 100mm or as per instructions of Engineer at site. All materials including Bakelite shelf, hylum board, salwood plank, wire and wiring material, non deteriorating type HRC fuses with bases, catenary wires, nuts and bolts and other items shall be supplied by the contractor and shall be as per the RDSO specn.(as applicable). Relays, ARA terminals only shall be supplied by the Railways.
76
7720
586723.8
... More
Casting, concreting and curing of foundation and erection of half app. cases of size (670mmx760mm) and 650mm deep as per Drg.No.NR/S&T/CON/2.8/97. A layer of 3 mm of bitumen 46 compound has to be provided between foundation and location box to prevent ingress of water in the base of location box. All material such ascement, coarse sand, aggregate and anchor bolt shall be supplied by contractor. App. Case half will be supplied by Railway. Contractor is required to execute all type of repair Works of foundations if required during inserting the cable for termination.
12
6549
78588.96
... More
Preparation of App. Case half not involving wiring of relays: Preparation & fixing of bakelite hylum sheet 910x800x6mm and Backelite shelf 900x450x25mm duly fixed by angle iron piece of different size inside all the app. Cases. Hylum board shall be fixed on an angle iron frame of 25mmx25mmx3mm. Angle iron frame will be fixed in location boxes secured by nuts and bolts.This includes fixing of fuses, ARA terminal, fixing and jamming of cables with 2 inch thick salwood plank 47 provided at the bottom. This will include opening, pasting and jamming armour of each cable in thehole drilled separately for each cable through the salwood plank and all cable entry points on location boxes, location huts, JBs relay room/battery room to be closed with suitable masonry Works covered with sand and plastering. Wiring description for terminal drawing of circuits, inside app. Case. Painting from out side as well inside with red oxide and aluminum paint is covered separately. Size of lettering will be 100mm or as per instructions of Engineer at site. All materials including Backelite shelf, hylum board, salwood plank, wire and wiring material, non deteriorating type HRC fuses with bases, catenary wires, nuts and bolts and other items shall be supplied by the contractor and shall be as per the RDSO specn.(as applicable). ARA terminals only shall be supplied by the Railways.
12
4106
49272
... More
Supply and installation of earth electrodes as per std. practice. The item includes digging of pit in earth, 3 Mtrs. deep and fixing earth electrode pipe. Casting of cement concrete enclosure sas per drg. No.(NR/S&T/CON/6.4/97) or latest. The soil treatment shall be done as per std. practice. The item includes provision of mild steel flat of size35mm x 6mm (as per IRSEM) and nut 48 bolted connection of MS flat with earth electrode. The other end of mild steel flat to be connected to block instrument, cable sheath of power equipment, signal base, apparatus case, CT rack / relay racks, other equipments asper the instruction of Engr. at site & IRSEM. Earth connection Signal & location boxes to be done Drg.No. 19-D6 of IRSEM App II or latest. Complete materials such as earth electrodes asper Drg. No. (NR/S&T/CON/6.3/97)or latest , cement, wiring material, nut bolt for connection & mild steel flat of size minimum 35mm x6mm or 210 sqm as per SEM etc. to be supplied by the contractor. Inspection by - Consignee for supply of earth electrode.
104
3712
386134.32
... More
Supply, installation & commissioning of maintenance free earth suitable kit as per RDSO specification RDSO/SPN/197/2008 and Drg No. SDO/RDSO/E&6/002 dated 19.09.2008 or latest with latest amendments. Earthing kit consisting :- 1. Earthing electrode of 17.0 mm dia 3m long- 01 No. 2. Main equi-potential Earth Busbar (MEEB) (300mm x 25mm X 6mm minim.) - 01 No. 3. Sub equi- potential Earth Busbar (SEEB) (150mm X 25mm X 6mm minim.) 01No. 4. Earth Enhancing compound- 30-35 Kg (minimum) 5. Multi-strand single core PVC insulated copper cable 10 Sq. mm as per IS:694 used to connect individual equipment to SEEB Minim. 10 mtrs or as per site requirement or as per Purchaser Railway 6. Multi-strand single core PVC insulated copper cable 16 Sq. mm as per IS:694 used to connect SEEB to MEEB Minim. 10 mtrs or as per site requirement or as per Purchaser Railway 7. Multi-strand single core PVC insulated copper cable 16 Sq. mm as per IS:694 used to connect SPD to MEEB Minim. 10 mtrs or as per site requirement or as per Purchaser Railway 8. Multi-strand Single core PVC insulated copper cable 35 sq mm as per IS:694 (Duplicated) used to connect MEEB to main 49 earth electrode Minim. 10 mtrs or as per site requirement or as per Purchaser Railway 9. Copper tape or solid copper round conductor of 25x2 mm or 8 mm dia used to connect Main earth pit to other earth pit in case of loop earth as per site requirement. 10. Copper strip of size 200mm X 25mm X 6mm to be exothermically welded to earth electrode - 1 No. 11. Exothermic Weld Material & Mould as per site requirement. This includes:- Provision of earth connection from MEEB/SEEB to S&T equipment i.e. cable sheath, apparatus case, BPAC, Axle counter, IPS, Data logger etc. with PVC earth wire of Size 16/10 Sq mm. through copper lugs of suitable size. PVC earth wire for connection of MEEB/SEEB to equipment shall be supplied by railway, Note: At certain locations, it may not be possible to achieve earth resistance of less than 1.0 ohm with one earth electrode/pit due to soil resistivity. In such cases, provision of loop earth consisting of more than one earth pit shall be done for interconnection of two earth pits copper tape of size 25 X 2 Sq. mm shall be provided by the contractor. The number of pits required shall be decided based on the resistance achieved for the earth pits already installed. The procedure mentioned above for one earth pit shall be repeated for other earth pits. The other earth so installed for the purpose of loop earthing arrangement shall be counted as separate earth. Supply by RDSO approved
118
24545
2896387.88
... More
Cleaning, scraping, painting and lettering of all newly installed and existing gears by the contractor for IBS. This includes supply of all painting materials and marking of all the ckt 50 particulars near terminal on terminal board/in apparatus case/Jn. boxes and fuse nos, relay and equipments nomenclatures as per approved terminal chart and provisions of SEM. All paints (ISI marked) with IS specification No.IS:15489:2004 Asian /Burger/Nerolac or similar make. shall be approved by Railway Engr. and painting materials to be supplied by the contractor.
2
23064
46128.76
... More
Supply, fixing and wiring of Type I and Type II Fuse Auto Changeover System (FACS main system) as per RDSO/SPN/209/2012 Rev. 2.0 with latest amendments. TYPE-I: 32 nos. of external Non Deteriorating Type or 'G' type fuses from 0.6 Amp to 4 Amp capacities which are in signalling circuits. System shall have 8 cards with monitoring arrangement of 4 fuses in one card. Installation , wiring, Testing and commissioning of Fuse Alarm System and wiring of potential free contact to datalogger, it consists of fixing of modules of fuse alarm system on existing relay rack, wiring from existing fuses to modules, module to datalogger, soldering, lacing etc. working to be executed without affecting the functioning of the existing circuits/gears and the work shall be supplied by the contractor. Inspection by-Consignee for supply portion.
-
-
51
... More
Supply & installation of Optical Fiber cable Joint enclosure as per 52 RDSO/SPN/TC/68/2014. Amdt. 1 or with latest amendment and splicing of optical Fiber cables (24 Fibers) and testing. This includes provision of joint pit (RCC/pre fabricated) as detail in the technical specification and as advised by engineer at site. Inspection :Consignee for supply item.
32
13199
422378.24
... More
Supply of VF Tapping & Termination Transformers 2T/1120:470 Ohm as per IRS-TC- 76/2021 or latest amendments (round type). Inspection by Consignee
96
2654
254867.52
... More
Supply of OFC jumper (Patch card) 10mtr. long with FC/PC & SC or suitable connector at both end as per IRS:TC-81/2000 with latest amendment. Inspection - Consignee
60
692
41544.6
... More
Supply, installation, commissioning of fault locator for short circuit detection in the fire alaram loop required as per UL listed solution & RDSO/SPN/217/2021. Ver 3.0 or latest. Inspection - Consignee for supply portion
18
5759
103677.84
... More
Supply, installation, commissioning Heat and Smoke Multi sensor detector with 56 automatically adjusts sensitivity levels without the need for operator intervention or programming sensitivity increase with heat varying and floating sensitivity from 0.5 to 4%/Ft and shall be plug in type facility and address through switch. The base should also be supplied as per RDSO/SPN/217/2021. Ver 3.0 or latest. Inspection - Consignee for supply portion
24
5949
142777.44
... More
Supply, installation, commissioning of analogue addressable UL listed Fire alram 57 Control Panel with 80 character display with battery charger and battery , backup for 24 Hr normal operation and 15 Min alaram operation addressable power supply and alphnumaric keypad for installation for the FAS panel and 1000 event recording facility without GSM interface module as per RDSO/SPN/217/2021. Ver 3.0 or latest. Inspection - RDSO for supply portion
3
564768
1694304.63
... More
Supply, installation, commissioning of analogue type Linear Heat Sensing (LHS) cable 58 which is self restorable after the fire event as long as its temperature does not exceed specified resettable temperature limit of 120 degree celsius it shall have an activation temperature of 70 degree celsius as per RDSO/SPN/217/2021. Ver 3.0 or latest. Inspection - RDSO for supply portion
300
1757
527268
... More
Supply, installation, commissioning of GUI software to monitor health of detector and 59 other devices along with control panel. The software shall be accessible over TCP/IP. It shall also be able to indicate in the device whenever the detector or the device would require to be serviced as per RDSO/SPN/217/2021. Ver 3.0 or latest. Inspection - RDSO for supply portion
3
176893
530680.77
... More
Supply, installation, commissioning of GSM interface module suitable to interface with the control panel as per RDSO/SPN/217/2021. Ver 3.0 or latest. Inspection - Consignee for supply portion
3
25901
77705.7
... More
Supply, installation, commissioning of UL listed glass break manual call point as per RDSO/SPN/217/2021. Ver 3.0 or latest. Inspection - Consignee for supply portion
6
5708
34249.74
... More
Supply, installation, commissioning of audio visual alarm unit as per RDSO/SPN/217/2021. Ver 3.0 or latest. Inspection - Consignee for supply portion
6
11289
67734.18
... More
Supply, installation, commissioning of Linear Heat Sensing interface module as per RDSO/SPN/217/2021. Ver 3.0 or latest. Inspection - Consignee for supply portion
3
146318
438956.04
... More
Supply, installation, commissioning of end of Line box for linear Heat Sensing cable as per RDSO/SPN/217/2021. Ver 3.0 or latest. Inspection - Consignee for supply portion
6
5173
31039.5
... More
Supply, installation, commissioning of circuit integrity cable 2 core 1.5 Sq.mm as per RDSO/SPN/217/2021. Ver 3.0 or latest. Inspection - Consignee for supply portion
-
-
65
... More
Supply & fixing of ISI marked Carbon di Oxide (BC) type fire extinguisher of 4.5 Kg 66 capacity to IS : 2878 from seamless cylinder confirming to IS : 7285 with IS marked control value confirming to IS : 3224 high pressure 1 mtr. Long discharge hose and horn complete with initial gas charged with carrying handle and wall mounting bracket, Fire Extinguisher to be kept as per HQ letter no 256-Sig/0/40/Fire/FDSS as required by site Engg. Inspection -Consignee for supply item
12
11015
132191.52
... More
Supply of 200 way tag blocks conforming to drg no. SA-24751 or latest and as per IRS:S77/2006 (Rev.1) or latest with latest Corr/Rev./Amdt. Inspection by Consignee
15
1618
24279.9
... More
Fixing, wiring & soldering of 200 way tag blocks, conforming to drg No .SA-24751 or latest and as per IRS:S-77/2006 (Rev.1) or latest with latest Corr/Rev./Amdt., on cable termination rack/relay rack/block rack/HV rack as per Drg.No.NR/S&T/CON/4.3/97A.
15
189
2848.95
... More
Supply & installation of Fibre Distribution Management system (FDMS)/LIU for 24 Fiber 69 complete with all accessories with patch cord & pigtail as per TEC Spec. GR/FDM/01/02April'2007 or latest. This include supply of installation accessories as per technicals pecification. Inspection: Consignee for supply portion
4
6420
25682
... More
Fabrication, supply and fixing of concrete cable marker as per RDSO drg. No. SDO/Cable Laying/020,dt.31.10.11 or as per SEM or latest drawing given by engineer The marker shall be fixed at various places of cable routeas per instruction of Eng. at site.
1220
1365
1666166.2
... More
Loading, Leading & unloading of materials from store to another store as per instruction of consignee. All the material to be transported carefully without damage. Contractor have to do proper stacking of material and prepare list of material.
63500
5
356870
... More
Supply of Optical Time Domain Reflectometer for 1310/1550 nm fiber with resolution 72 of 60 Cms, dynamic Range of 314/29 dB with all accessories confirming to TEC Specification No. TEC Specification No.G/OTD/02-03 March 2009.Make EXFO Model MAX 720C , AQ-7270+735022.Make Yokogawa Electric Co Ltd Japan or Similar/reputed make. Inspection : Consignee
2
142271
284543.78
... More
Single fiber fusion splicer similar to fujikura 80C with standard accessories :ACADAPTER /BATTERY Charger ADC181PC, AC Power Cord ACC-XX: 1PC spare electrode Elect2- 20:1 pair carrying caseCC-30:1PC USB cable USB-01: 1PCSleeve loader SL01:1 PC dispenserAP-01: 1 PC 73 screwdriver SC-01 1PC,Instruction Manual: 1 PC Quick reference Guide 1PC warning& cautions:1 PC ; BATTERY RACK BRT-09, Battery charger cord DCC-18: 1 PC High precision Fiber cleaver CT-06: 1 PC, 3 in-1 Stripper : 1PC & Protection sleeves:25nos. ( A demo shall be arranged along with supply) as per TEC Specification g/osm/01-03 April 2005 Model S-177A.Make FURUKAWA ELECTRIC COJapan. Type approved or Similar/better. Visual Inspection by RITES against test certificate & guarantee certifcate of OEM.
2
258698
517396.36
... More
Supply of Tool Kit consisting of Optical power meter (Fiber shot 9990V), Multimeter 74 (Fluke101 or similar), Ethernet Crimping Tool (Standard Make) Console cable(Cisco=RJ45 DB9),Wrist ripper (StandardMake), Universal Spanner Set (Taparia), Screw Driver Set (Taparia-7Pieces set), Cutting plier (Taparia), Wire Stripper, Industrial grade USB to Serial cable with all accessories or Similar. Inspection : Consignee
2
20847
41694.96
... More
Supply of cable/wire indoor copper conductor single/multi core plain annealed high 75 conductivity PVC insulated unarmoured as per Spec. no. IRS-S/76/89 (Amd. 3) or latest amendment of the following sizes:- (i) Wire 1*1mm/16*0.2mm Inspection by Consignee (to be procured From RDSO Approved Source only)
14
8574
120039.5
... More
Concreting unscheduled items in concrete of 1:3:6 ratio in cement, coarse sand and aggregate 25mm at different places in the yard and plastering top in fine plaster of 1:4 cement sand 76 ratio. It also includes the excavation of earth as required at site and as per instruction of site incharge. The volume in cubic metres shall include the volume occupied by any CI foundation, trestle, MS angle or flat or GI pipe required to be embedded in the casting. Cement coarse sand and aggregate 25mm are to be supplied by the contractor.
30
3810
114303
... More
Earth work for excavation and refilling around location boxes and signals etc. where necessary including 50M lead and 1.5M lift. The lead is to be measured from centre of gravity of location to the centre of filling and lift from main ground level. The earth work should be well rammed including breaking of clods, levelling and dressing etc. as per instruction of Engineer at site.
-
-
77
... More
Brick work with well burnt bricks in foundations and plinths with cement and sand (ordinary) mixture of 1:4 ratio. All material is to be supplied by the contractor. (Inspection: Engg representative.)
30
2644
79333.2
... More
Engaging mechanical excavators like JCB or other machineries for regarding and leveling the formation, Dismantling any infringing structures, clearing and removing debris etc., with all lead and lifts etc., complete and as per the instruction of railway representative at site.
24
1097
26342.16
... More
Supply of furniture of Godrej or similar reputed make as per approval of engineer consisting of the following: 1. Executive revolving bearing series low back floating chair with normal 80 arms cushioned Chair : 1No.2. Executive Table size 72x36x30" with 3 drawers one side, lockers cabinet on other side : 1 No. 3. Visitor chair seat & back cushion with high density Foam with plastic PVC handle capsul type Flat pipeduly Painted black : 3Nos.4. One Steel Almirah of size48"x30"x17" with lock and handle arrangement for record keeping at station. Inspection :Consignee
3
53219
159658.56
... More
Supply of Indoor cable 60x1mm indoor copper conductor 60 core plain annealed high conductivity PVC insulated unarmoured as per Spec. no. IRS-S/76/89 (Amd 3) or latest amendment. Inspection by Consignee (From RDSO Approved Source only).
1
451365
451365.55
... More
Supply of wiring materials as per IS Spec. No. 2465/1984 with latest Amend. and IS 82 694/2010 or latest Copper wire, PVC insulated sizes as under. (a) Power wire 1*6 Sq. mm (RED & BLACK colour 50% each). Material to be procure from RDSO approve firm. Test parameters are as per (IRS)/76/89 (Amdnt.3). Inspection- Consignee
1.5
58034
87052.01
... More
Supply of wiring materials as per IS Spec. No.2465/1984 with latest amendment and 83 IS694/2010 or latest Copper wire, PVC insulated sizes as under. (a) Power wire 1*16 Sq. mm (RED & BLACK colour 50% each). Material to be procurefrom RDSO approve firm. Test parameters are as per (IRS)/76/89(Amdnt.3). Inspection-Consignee
0.6
-
101378.05
... More
Supply of 3 phase Manual changeover switch 63Amps/100Amps. Siemens/Havells or similar Iron Clad switch. Inspection by- Consignee.
6
6318
37911.12
... More
Supply ,installation , wiring, testing ,validation , commissiong of 512 port digital input and 32 port analog input datalogger with built in network internal modem and power supply as per 85 RDSO Specification No. IRS : S99/2006 (Amend-3) or latest amendments or as per latest specification. This also includes Protocol convertor for data logger .This includes wiring of all the functions terminated at terminal strip in RR/RH to Data logger. Necessary wiring material and strip connectors to be supplied by the contractor.Pre- Commissioning Checklist to be done as per RDSO norms by OEM. Inspection by RDSO FOR SUPPLY PORTION.
3
806161
2418484.44
... More
Supply & laying of RCC Duct Size- 290mm* 260mm* 700mm as per RDSO drg No. SDO/S&T/RCC duct/1025 or latest amdt. Inspection by RITES for supply item.
2000
905
1810000
... More
Supply and provision of straight through joints with the help of thermoshrink jointing ( 87 TSF) kit as per specifications, drawings and stipulations of tender documents and as per approved cable route plan at various locations for 06 quad/04 Quad cable. Jointing kit to be supplied as per RDSO Specification IRS:TC 77-2012 (Amdt-3) or latest amendments. Inspection: Consignee for supply portion
15
7862
117941.7
... More
Supply of Road Measuring Cycle of reputed make, made of Aluminium with 05 digit counter, foldable with bag. Inspection: Consignee
20
4624
92484.2
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%