Northern Coalfields Limited Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Northern Coalfields Limited - NCL Tender
Civil And Construction
Construction Material
Eprocure
Opening Date13 Feb 2025
Closing Date3 Mar 2025
Tender Amount₹ 2,55,49,082
Technical
Technical
Financial
Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender includes 'Class-I local supplier' and 'Class-II local supplier', with participation also open to 'Non-Local supplier' under specific conditions.
Technical Capacity
... View More
The required prior work experience for the bidder can be fulfilled in the following manner:
- Completion of a single work of similar nature costing not less than 80% of the estimated cost put to tender.
- Completion of two works of similar nature, each costing not less than 50% of the estimated cost put to tender.
- Completion of three works of similar nature, each costing not less than 40% of the estimated cost put to tender. The experience can be achieved by either the JV itself or any one partner matching the requirement, or through a combination of partners completing the required number of works. The proportionate value of experience in proportion to actual share of bidder in that joint venture firm/partnership firm will be considered against eligibility, else it shall be taken as 100%. The cost of previous completed works will be given a simple weightage of 5% per year to bring them to the current price level. The estimated cost put to tender is above Rs. 2.0 Crores for Joint Venture participation. Additionally, the bidder should meet the minimum local content requirement, which is either equal to or more than 50% (for Class-I Local Suppliers) or more than 20% but less than 50% (for Class-II Local Suppliers). If the estimated value of procurement is more than Rs. 10 crores, the bidder should submit a certificate from the statutory auditor or cost auditor of the company, giving the percentage of local content.
Costs
EMD
₹ 3,19,400Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_NCL_329004_1Tender No
NCL/CSR/HOD (CSR)/GM (Civil)/24-25/ETN-31 Dated 13.02.2025Tender Authority
Northern Coalfields Limited ViewPurchaser Address
-Website
http://http://nclcil.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
In cement mortar
20.5
1130
23179.35
... More
Brick work with FALG bricks of class designation 7.5 in foundation and plinth in:
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
64.7
5193
336038.86
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
18.67
8482
158366.41
... More
Centering and shuttering including strutting, propping etc. and removal of form for
-
-
-
... More
Suspended floors, roofs, landings, balconies and access platform
90.76
556
50535.17
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending,
placing in position and binding all complete upto plinth level.
-
-
-
... More
Cold twisted bars
1831.99
101
185488.99
... More
12 mm cement plaster finished with a floating coat of neat cement of mix :
-
-
-
... More
1:4 (1 cement: 4 fine sand)
434.8
281
122461.42
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of
approved steel primer all complete.
3670
104
382414
... More
Providing and applying white cement based putty of average thickness 1 mm, of
approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2448.99
94
230205.06
... More
Distempering with oil bound washable distemper of approved brand and
manufacture to give an even shade :
-
-
-
... More
New work (two or more coats) over and including water thinnable priming coat
with cement primer
2448.99
115
282491
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc.,
complete.
-
-
-
... More
Size of Tile 600x600 mm
697.9
1162
811518.12
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade :
-
-
-
... More
Two or more coats on new work
297.96
95
28514.77
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
552.58
384
212715.67
... More
Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by
the Engineer-in-Charge.
-
-
-
... More
18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark
Emperadore etc.
28.08
7448
209165.11
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
196.5
301
59323.35
... More
Construction of granular sub-base by providing well graded material like natural sand crushed gravel or crushed stone having CBR 30, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator or plant mix method at OMC, and compacting with vibratory rollers of 80 to 100 kN static weight to achieve the desired density, complete as per Clause 401 of Specification
47.88
1783
85384.88
... More
Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and
brackets, cutting and making good the walls wherever required:
-
-
-
... More
White glazed fire clay kitchen sink of size 600x450x 250 mm
12
2679
32148
... More
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
383
768
294297.2
... More
Sign board
2
4800
9600
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall
-
-
-
... More
25 mm nominal dia Pipes
60
324
19446
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base
support for tank.
500
8
4175
... More
Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the
walls and floors wherever required:
-
-
-
... More
White vitreous china dual purpose WC pan with white solid plastic seat and lid
with white vitreous china flushing cistern and C.P. flush bend.
2
8291
16582.1
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and
brackets, cutting and making good the walls wherever require:
-
-
-
... More
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P.
brass pillar taps
2
2726
5452.7
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming
to IS standards and weighing not less than 810 gms.
-
-
-
... More
15 mm nominal bore
14
673
9422.7
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of
approved make conforming to IS:8931.
-
-
-
... More
15 mm nominal bore
16
582
9320.8
... More
Concealed stop cock, 15 mm nominal bore, 108 mm long, weighing not less than
108 gms
16
159
2548
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of
approved quality conforming to IS:8931
-
-
-
... More
15mm nominal bore
2
534
1068.5
... More
Rajkiya High School Bhawan Chitaipur, Varanasi
-
-
-
... More
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
533.58
11
6002.78
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
1155.75
30
35019.23
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead
as per direction of Engineer-in-charge.
-
-
-
... More
In cement mortar
20.5
1130
23179.35
... More
Brick work with FALG bricks of class designation 7.5 in foundation and plinth in:
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
25.41
5193
131974.46
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
18.67
8482
158366.41
... More
Centering and shuttering including strutting, propping etc. and removal of form for
-
-
-
... More
Suspended floors, roofs, landings, balconies and access platform
90.76
556
50535.17
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending,
placing in position and binding all complete upto plinth level.
-
-
-
... More
Cold twisted bars
1026.85
101
103968.56
... More
12 mm cement plaster finished with a floating coat of neat cement of mix :
-
-
-
... More
1:4 (1 cement: 4 fine sand)
1257.75
281
354245.29
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of
approved steel primer all complete.
2276
104
237159.2
... More
Providing and applying white cement based putty of average thickness 1 mm, of
approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2028.25
94
190655.5
... More
Distempering with oil bound washable distemper of approved brand and
manufacture to give an even shade :
-
-
-
... More
New work (two or more coats) over and including water thinnable priming coat
with cement primer
2028.25
115
233958.64
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc.,
complete.
-
-
-
... More
Size of Tile 600x600 mm
686.4
1162
798145.92
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade :
-
-
-
... More
Two or more coats on new work
224.18
95
21454.03
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
533.58
384
205401.62
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
48.14
301
14533.47
... More
Construction of granular sub-base by providing well graded material like natural sand crushed gravel or crushed stone having CBR 30, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator or plant mix method at OMC, and compacting with vibratory rollers of 80 to 100 kN static weight to achieve the desired density, complete as per Clause 401 of Specification
20.06
1783
35773.2
... More
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
160.48
768
123312.83
... More
sign board
2
4800
9600
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base
support for tank.
2500
8
20875
... More
Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the
walls and floors wherever required:
-
-
-
... More
White vitreous china dual purpose WC pan with white solid plastic seat and lid
with white vitreous china flushing cistern and C.P. flush bend.
8
8291
66328.4
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and
brackets, cutting and making good the walls wherever require:
-
-
-
... More
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P.
brass pillar taps
2
2726
5452.7
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming
to IS standards and weighing not less than 810 gms.
-
-
-
... More
15 mm nominal bore
22
673
14807.1
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of
approved make conforming to IS:8931.
-
-
-
... More
15 mm nominal bore
8
582
4660.4
... More
Concealed stop cock, 15 mm nominal bore, 108 mm long, weighing not less than
108 gms
8
159
1274
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of
approved quality conforming to IS:8931
-
-
-
... More
15mm nominal bore
2
534
1068.5
... More
Rajkiya High School Thatara Sevapuri, Varanasi
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
-
-
-
... More
All kinds of soil
4.39
152
668.16
... More
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded
stone aggregate 20 mm nominal size derived from natural sources)
1.1
5402
5943.25
... More
Brick work with FALG bricks of class designation 7.5 in foundation and plinth in:
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
5.35
5193
27786.83
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
1.29
170
219.62
... More
1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3
graded stone aggregate 20 mm nominal size derived from natural sources)
0.22
6510
1432.26
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
-
-
-
... More
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natu- ral sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
0.84
8147
6843.9
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending,
placing in position and binding all complete upto plinth level.
-
-
-
... More
Cold twisted bars
103
101
10428.75
... More
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
-
-
-
... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate
20 mm nominal size).
101
122
12377.55
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and
face veneers on both faces of shutters.
-
-
-
... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary
screws
5.25
2569
13488.83
... More
12 mm cement plaster of mix :
-
-
-
... More
1:6 (1 cement: 6 fine sand)
52.3
215
11268.03
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry,
but excluding the cost of nosing of steps etc. complete.
-
-
-
... More
40 mm thick with 20 mm nominal size stone aggregate
3.38
427
1443.77
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or
shade, with necessary screws etc. complete :
-
-
-
... More
125 mm
9
50
457.65
... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and
screws etc. complete :
-
-
-
... More
300x16 mm
3
152
458.4
... More
Single rubber stopper
3
29
89.55
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade
complete.
9.83
845
8310.28
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc.,
complete.
-
-
-
... More
Size of Tile 600x600 mm
3.38
1162
3930.26
... More
Wall painting with plastic emulsion paint of approved brand and manufacture to
give an even shade:
-
-
-
... More
One or more coats on old work
21.15
65
1385.32
... More
Providing and applying white cement based putty of average thickness 1 mm, of
approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
25.84
94
2428.96
... More
Finishing walls with water proofing cement paint of required shade :
-
-
-
... More
New work (Two or more coats applied @ 3.84 kg/10 sqm)
25.84
71
1844.98
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade :
-
-
-
... More
Two or more coats on new work
12.02
95
1150.31
... More
Providing and fixing white vitreous china pedestal type water closet (European type
W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
-
-
-
... More
W.C. pan with ISI marked white solid plastic seat and lid
8
4387
35098.8
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.
2
1070
2141.4
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing
of joints etc. complete :
-
-
-
... More
100 mm diameter
5
292
1464
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting
and making good the walls etc. Internal work - Exposed on wall
-
-
-
... More
15 mm dia nominal bore
5
259
1298.25
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming
to IS standards and weighing not less than 810 gms.
-
-
-
... More
15 mm nominal bore
2
673
1346.1
... More
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P.
brass pillar taps
1
2726
2726.35
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
-
-
-
... More
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
13.4
1337
17919.82
... More
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
1937.79
11
21800.14
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
264.02
30
7999.81
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work
up to plinth level :
-
-
-
... More
1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded
stone aggregate 20 mm nominal size de rived from natural sources)
13.04
6434
83901.97
... More
Brick work with FALG bricks of class designation 7.5 in foundation and plinth in:
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
1.3
5193
6751.94
... More
Providing and applying white cement based putty of average thickness 1 mm, of
approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1937.79
94
182152.26
... More
Distempering with oil bound washable distemper of approved brand and
manufacture to give an even shade :
-
-
-
... More
New work (two or more coats) over and including water thinnable priming coat
with cement primer
1937.79
115
223524.08
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead
as per direction of Engineer-in-charge.
-
-
-
... More
In mud mortar
205.65
387
79586.55
... More
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded
stone aggregate 40 mm nominal size derived from natural sources)
22.17
4895
108523.26
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc.,
complete.
-
-
-
... More
Size of Tile 600x600 mm
200.75
1162
233432.1
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade :
-
-
-
... More
Two or more coats on new work
127.25
95
12177.83
... More
12 mm cement plaster of mix :
-
-
-
... More
1:6 (1 cement: 6 fine sand)
275.36
215
59326.31
... More
Finishing walls with water proofing cement paint of required shade :
-
-
-
... More
New work (Two or more coats applied @ 3.84 kg/10 sqm)
1937.79
71
138358.21
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting
and making good the walls etc. Internal work - Exposed on wall
-
-
-
... More
15 mm dia nominal bore
15
259
3894.75
... More
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P.
brass pillar taps
3
2726
8179.05
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base
support for tank.
1000
8
8350
... More
Orissa pattern W.C. pan of size 580x440 mm
2
2221
4443.6
... More
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures
complete.
-
-
-
... More
10 litre capacity - White
2
840
1681
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of
approved steel primer all complete.
4700
104
489740
... More
supplying and fixing of ceiling fan
15
3500
52500
... More
Construction of divyang toilet including all as per attached sor rate toilet+soak pit
1
128327
128327.96
... More
supplying and fixing informatory sign board i/c all complete
1
4800
4800
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as
directed, within a lead of 50 m.
-
-
-
... More
All kinds of soil.
193.1
206
39913.77
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
-
-
-
... More
All kinds of soil
2.7
152
410.94
... More
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded
stone aggregate 40 mm nominal size derived from natural sources)
1.01
4895
4944
... More
Brick work with FALG bricks of class designation 7.5 in foundation and plinth in:
-
-
-
... More
Cement mortar 1:4 (1 cement : 4 coarse sand)
4.73
5435
25709.44
... More
12 mm cement plaster of mix :
-
-
-
... More
1:4 (1 cement: 4 fine sand)
15.75
229
3612.26
... More
Construction of granular sub-base by providing well graded material like natural sand crushed gravel or crushed stone having CBR 30, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator or plant mix method at OMC, and compacting with vibratory rollers of 80 to 100 kN static weight to achieve the desired density, complete as per Clause 401 of Specification
67.78
1783
120872.75
... More
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
542
768
416472.8
... More
Rajkiya High School Belari, Varanasi
-
-
-
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
479.03
30
14514.61
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter
including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
-
-
-
... More
Of area 3 sq. metres and below
38.25
207
7931.14
... More
12 mm cement plaster of mix :
-
-
-
... More
1:4 (1 cement: 4 coarse sand)
479.03
229
109865.53
... More
Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved
steel primer
102.6
5034
516560.22
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
12
509
6111.6
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
... More
110 mm diameter
32
250
8011.2
... More
Bend 87.5°
-
-
-
... More
110 mm bend
12
114
1375.2
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall
etc. complete.
-
-
-
... More
110 mm
16
223
3575.2
... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated
five layer, 3 mm thick water proofing membrane, black finished reinforced with
glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @
0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89
kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane
shall be laid using butane torch and sealing all joints etc., and preparing the surface
complete. The vital physical and chemical parameters of the membrane shall be as
under : Joint strength in longitudinal and transverse direction at 23°C as 350/300
N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening
point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when
tested in accordance with ASTM, D - 5147. The laying of membrane shall be got
done through the authorised applicator of the manufacturer of membrane : 3 mm thick
268.97
435
117257.47
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry,
but excluding the cost of nosing of steps etc. complete.
-
-
-
... More
40 mm thick with 20 mm nominal size stone aggregate
36.15
427
15441.47
... More
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3
coarse sand), finished with a floating coat of neat cement.
-
-
-
... More
18 mm thick
36.15
430
15548.12
... More
Removing dry or oil bound distemper, water proofing cement paint and the like by
scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
2339.56
14
33923.62
... More
Providing and applying white cement based putty of average thickness 1 mm, of
approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2339.56
94
219918.64
... More
Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :
-
-
-
... More
Two coats
1796.39
100
180806.65
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone
additives of required shade:
-
-
-
... More
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including
priming coat of exterior primer applied @ 2.20 kg/10 sqm)
598.88
129
77435.18
... More
Painting with synthetic enamel paint of approved brand and manufacture of
required colour to give an even shade :
-
-
-
... More
Two or more coats on new work over an under coat of suitable shade with ordinary
paint of approved brand and manufacture
75.68
139
10542.22
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade :
-
-
-
... More
Two or more coats on new work
12
95
1148.4
... More
Lettering with black Japan paint of approved brand and manufacture
1500
3
5250
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
449.15
30
13609.24
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc.,
complete.
-
-
-
... More
Size of Tile 600x600 mm
370.93
1162
431322.06
... More
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry,
including rubbing and polishing complete with :
-
-
-
... More
Udaipur green marble
83.69
1696
141985.85
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement
mortar 1:4 (1 cement: 4 coarse sand).
-
-
-
... More
Light shade pigment using white cement
30.75
988
30394.84
... More
Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c
malba all complete as per directions of Engineer-in- Charge.
1
74
74.2
... More
Removing dry or oil bound distemper, water proofing cement paint and the like by
scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
95.25
14
1381.13
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
28.58
30
865.97
... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking
material within 50 metres lead.
-
-
-
... More
For thickness of tiles 10 mm to 25 mm
12.15
41
503.62
... More
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded
stone aggregate 40 mm nominal size derived from natural sources)
0.8
4895
3916.04
... More
Brick work with FALG bricks of class designation 7.5 in foundation and plinth in:
-
-
-
... More
Cement mortar 1:4 (1 cement : 4 coarse sand)
0.5
5435
2717.7
... More
12 mm cement plaster of mix :
-
-
-
... More
1:4 (1 cement: 4 coarse sand)
30.74
229
7050.22
... More
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
11.76
925
10878.59
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade
complete.
25.41
845
21481.61
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement
mortar 1:4 (1 cement: 4 coarse sand).
-
-
-
... More
Light shade pigment using white cement
5.4
988
5337.63
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and
face veneers on both faces of shutters.
-
-
-
... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary
screws
2.52
2569
6474.64
... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with
necessary screws etc. complete :
-
-
-
... More
125 mm
2
28
57.8
... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and
screws etc. complete :
-
-
-
... More
300x16 mm
2
152
305.6
... More
Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc.
wherever required :
-
-
-
... More
Single squatting plate with 5 litre P.V.C. automatic flushing cistern
1
5879
5879.4
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming
coat of approved steel primer.
9.87
8102
79972.66
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and
brackets, cutting and making good the walls wherever require:
-
-
-
... More
White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P.
brass pillar taps
1
2523
2523.1
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm
gap for thermal expansion.
-
-
-
... More
110 mm bend
2
114
229.2
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
... More
110 mm diameter
40
250
10014
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall
etc. complete.
-
-
-
... More
110 mm
3
223
670.35
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good
the walls etc.
-
-
-
... More
20 mm nominal dia Pipes
45
392
17680.5
... More
25 mm nominal dia Pipes
30
490
14712
... More
Providing and fixing uplasticised PVC connection pipe with brass unions :
-
-
-
... More
45 cm length
-
-
-
... More
15 mm nominal bore
2
73
147.9
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
1
177
177.7
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden
cleats with C.P. brass screws and washers complete.
1
1089
1089.55
... More
Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete
:
-
-
-
... More
100 mm dia
1
309
309.15
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of
approved make conforming to IS:8931.
-
-
-
... More
15 mm nominal bore
1
582
582.55
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to
IS:8931 :
-
-
-
... More
15 mm nominal bore
1
587
587.2
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming
to IS standards and weighing not less than 690 gms.
-
-
-
... More
15 mm nominal bore
1
667
667.25
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
50
509
25465
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III)
: 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less
than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
... More
With FALG bricks of class designation 7.5
1
9703
9703.35
... More
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc.
complete :
-
-
-
... More
For pipes 100 to 250 mm diameter
1
504
504.6
... More
Providing and applying white cement based putty of average thickness 1 mm, of
approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
92.25
94
8671.5
... More
Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :
-
-
-
... More
Two coats
24.2
100
2435.73
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone
additives of required shade:
-
-
-
... More
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including
priming coat of exterior primer applied @ 2.20 kg/10 sqm)
71.05
129
9186.77
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base
support for tank.
3000
8
25050
... More
water tank plateform
3
2500
7500
... More
Dismantling w c pan including c c floor and disposal of rubbish material at site upto 500mtr
8
2000
16000
... More
Removing dry or oil bound distemper, water proofing cement paint and the like by
scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
109.43
14
1586.74
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
32.83
30
994.75
... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking
material within 50 metres lead.
-
-
-
... More
For thickness of tiles 10 mm to 25 mm
111.72
41
4630.79
... More
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded
stone aggregate 40 mm nominal size derived from natural sources)
23.77
4895
116355.34
... More
12 mm cement plaster of mix :
-
-
-
... More
1:4 (1 cement: 4 coarse sand)
32.83
229
7529.56
... More
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
23.77
925
21988.44
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade
complete.
71.7
845
60615.18
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement
mortar 1:4 (1 cement: 4 coarse sand).
-
-
-
... More
Light shade pigment using white cement
2.63
988
2599.62
... More
Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved
steel primer
12.6
5034
63437.22
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
-
-
-
... More
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral
type foot rests
8
4596
36771.2
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and
brackets, cutting and making good the walls wherever require:
-
-
-
... More
White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P.
brass pillar taps
8
2523
20184.8
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm
gap for thermal expansion.
-
-
-
... More
Bend 87.5°
-
-
-
... More
110 mm bend
24
114
2750.4
... More
Single tee without door
-
-
-
... More
110x110x110 mm
30
165
4968
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
... More
110 mm diameter
80
250
20028
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall
etc. complete.
-
-
-
... More
110 mm
24
223
5362.8
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good
the walls etc.
-
-
-
... More
20 mm nominal dia Pipes
100
392
39290
... More
25 mm nominal dia Pipes
80
490
39232
... More
32 mm nominal dia Pipes
120
565
67878
... More
Providing and fixing uplasticised PVC connection pipe with brass unions :
-
-
-
... More
45 cm length
-
-
-
... More
15 mm nominal bore
18
73
1331.1
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
8
177
1421.6
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden
cleats with C.P. brass screws and washers complete.
8
1089
8716.4
... More
Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete
:
-
-
-
... More
100 mm dia
10
309
3091.5
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of
approved make conforming to IS:8931.
-
-
-
... More
15 mm nominal bore
8
582
4660.4
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to
IS:8931 :
-
-
-
... More
15 mm nominal bore
8
587
4697.6
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming
to IS standards and weighing not less than 690 gms.
-
-
-
... More
15 mm nominal bore
8
667
5338
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III)
: 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less
than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
... More
With FALG bricks of class designation 7.5
8
9703
77626.8
... More
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc.
complete :
-
-
-
... More
For pipes 100 to 250 mm diameter
2
504
1009.2
... More
Providing and applying white cement based putty of average thickness 1 mm, of
approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
109.43
94
10286.42
... More
Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :
-
-
-
... More
Two coats
79.46
100
7997.65
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone
additives of required shade:
-
-
-
... More
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including
priming coat of exterior primer applied @ 2.20 kg/10 sqm)
29.97
129
3875.12
... More
Earth work in cutting & filling i/c cartage 8.00 km levelling dressing and compaction complete
38.78
326
12642.28
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as
directed, within a lead of 50 m.
-
-
-
... More
All kinds of soil.
3.92
206
810.26
... More
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded
stone aggregate 40 mm nominal size derived from natural sources)
1.96
4895
9594.3
... More
Brick work with FALG bricks of class designation 7.5 in foundation and plinth in:
-
-
-
... More
Cement mortar 1:4 (1 cement : 4 coarse sand)
3.76
5435
20437.1
... More
Construction of granular sub-base by providing well graded material like natural sand crushed gravel or crushed stone having CBR 30, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator or plant mix method at OMC, and compacting with vibratory rollers of 80 to 100 kN static weight to achieve the desired density, complete as per Clause 401 of Specification
17.69
1783
31546.75
... More
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
176.86
768
135899.22
... More
1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded
stone aggregate 20 mm nominal size derived from natural sources)
3.76
6036
22695.92
... More
12 mm cement plaster finished with a floating coat of neat cement of mix :
-
-
-
... More
1:3 (1 cement: 3 fine sand)
9.81
295
2899.35
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
-
-
-
... More
All kinds of soil
54.38
152
8276.64
... More
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded
stone aggregate 40 mm nominal size derived from natural sources)
1.49
4895
7293.62
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work
up to plinth level :
-
-
-
... More
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3
graded stone aggregate 20 mm nominal size de rived from natural sources)
1.2
6908
8289.96
... More
Brick work with FALG bricks of class designation 7.5 in foundation and plinth in:
-
-
-
... More
Cement mortar 1:4 (1 cement : 4 coarse sand)
9.51
5435
51690.65
... More
15 mm cement plaster on rough side of single or half brick wall of mix:
-
-
-
... More
1:4 (1 cement: 4 coarse sand)
44.3
265
11746.14
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending,
placing in position and binding all complete upto plinth level.
-
-
-
... More
Mild steel and Medium Tensile steel bars
94.2
101
9537.75
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size) as per standard design :
-
-
-
... More
With 20x20 mm square bar
6
411
2467.2
... More
Providing and laying of pvc swr pipe
70
1110
77717.5
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III)
: 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less
than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
... More
With FALG bricks of class designation 7.5
12
9703
116440.2
... More
Supplying and stacking at site 90mm to 45mm size stone aggregate
12
9386
112636.2
... More
stone screening 11.2mm nominal size (Type B)
9
1652
14868.81
... More
Red Bajri
4.5
1150
5175.9
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground
level.
-
-
-
... More
300 mm dia
30
475
14278.5
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
... More
110 mm diameter
30
250
7510.5
... More
Supply and fixing of nylon jali around the sloted pipes complet as required
1
2500
2500
... More
Transport of boring tools other required equipments and instalation at site
1
5000
5000
... More
Rajkiya Balika Inter College Jhakhani
-
-
-
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
48.57
1337
64953.66
... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated
five layer, 3 mm thick water proofing membrane, black finished reinforced with
glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @
0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89
kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane
shall be laid using butane torch and sealing all joints etc., and preparing the surface
complete. The vital physical and chemical parameters of the membrane shall be as
under : Joint strength in longitudinal and transverse direction at 23°C as 350/300
N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening
point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when
tested in accordance with ASTM, D - 5147. The laying of membrane shall be got
done through the authorised applicator of the manufacturer of membrane : 3 mm thick
647.61
435
282325.58
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
388.57
30
11773.67
... More
12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand)
647.61
229
148529.35
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
647.61
94
60875.34
... More
Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer's specification One or more coats on old work
647.61
36
23670.15
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm diameter
66.5
250
16648.27
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5° 110 mm bend
38
114
4354.8
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm
45
223
10055.25
... More
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
1998.05
11
22478.06
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
936.45
30
28374.44
... More
12 mm cement plaster of mix :
-
-
-
... More
1:6 (1 cement: 6 coarse sand)
936.45
215
201758.15
... More
Providing and applying white cement based putty of average thickness 1 mm, of
approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2248.35
94
211344.9
... More
Distempering with oil bound washable distemper of approved brand and
manufacture to give an even shade :
-
-
-
... More
New work (two or more coats) over and including water thinnable priming coat
with cement primer
1311.91
115
151328.82
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone
additives of required shade:
-
-
-
... More
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including
priming coat of exterior primer applied @ 2.20 kg/10 sqm)
936.45
129
121082.99
... More
Painting with synthetic enamel paint of approved brand and manufacture of
required colour to give an even shade :
-
-
-
... More
Two or more coats on new work over an under coat of suitable shade with ordinary
paint of approved brand and manufacture
357.19
139
49756.57
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Float glass panes 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm).
108.81
1740
189416.45
... More
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 2nd class teak wood beading 62X19 mm
108.81
1152
125430.73
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter
including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
-
-
-
... More
Of area 3 sq. metres and below
20
207
4147
... More
Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved
steel primer
61.2
5034
308123.64
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
638.99
30
19361.4
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry,
but excluding the cost of nosing of steps etc. complete.
-
-
-
... More
40 mm thick with 20 mm nominal size stone aggregate
255.59
427
109175.27
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc.,
complete.
-
-
-
... More
Size of Tile 600x600 mm
638.99
1162
743017.57
... More
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry,
including rubbing and polishing complete with :
-
-
-
... More
Udaipur green marble
132.86
1696
225416.92
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
48.57
1337
64953.66
... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated
five layer, 3 mm thick water proofing membrane, black finished reinforced with
glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @
0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89
kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane
shall be laid using butane torch and sealing all joints etc., and preparing the surface
complete. The vital physical and chemical parameters of the membrane shall be as
under : Joint strength in longitudinal and transverse direction at 23°C as 350/300
N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening
point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when
tested in accordance with ASTM, D - 5147. The laying of membrane shall be got
done through the authorised applicator of the manufacturer of membrane : 3 mm thick
647.61
435
282325.58
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
388.57
30
11773.67
... More
12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand)
647.61
229
148529.35
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
647.61
94
60875.34
... More
Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer's specification One or more coats on old work
647.61
36
23670.15
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm diameter
66.5
250
16648.27
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5° 110 mm bend
38
114
4354.8
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm
45
223
10055.25
... More
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
1352.99
11
15221.14
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
417.86
30
12661.16
... More
12 mm cement plaster of mix :
-
-
-
... More
1:6 (1 cement: 6 coarse sand)
417.86
215
90027.94
... More
Providing and applying white cement based putty of average thickness 1 mm, of
approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1352.99
94
127181.06
... More
Distempering with oil bound washable distemper of approved brand and
manufacture to give an even shade :
-
-
-
... More
New work (two or more coats) over and including water thinnable priming coat
with cement primer
822.25
115
94846.54
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone
additives of required shade:
-
-
-
... More
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including
priming coat of exterior primer applied @ 2.20 kg/10 sqm)
530.74
129
68624.68
... More
Painting with synthetic enamel paint of approved brand and manufacture of
required colour to give an even shade :
-
-
-
... More
Two or more coats on new work over an under coat of suitable shade with ordinary
paint of approved brand and manufacture
154.34
139
21499.56
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Float glass panes 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm).
108.81
1740
189416.45
... More
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 2nd class teak wood beading 62X19 mm
108.81
1152
125430.73
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter
including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
-
-
-
... More
Of area 3 sq. metres and below
6
207
1244.1
... More
Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved
steel primer
15.12
5034
76124.66
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
371.88
30
11267.96
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry,
but excluding the cost of nosing of steps etc. complete.
-
-
-
... More
40 mm thick with 20 mm nominal size stone aggregate
148.75
427
63538.56
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc.,
complete.
-
-
-
... More
Size of Tile 500x500 mm
371.88
1091
405851.24
... More
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry,
including rubbing and polishing complete with :
-
-
-
... More
Udaipur green marble
11.08
1696
18798.88
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as
directed, within a lead of 50 m.
-
-
-
... More
All kinds of soil.
1.86
206
384.46
... More
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded
stone aggregate 40 mm nominal size derived from natural sources)
9.63
4895
47139.33
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
51.5
170
8767.88
... More
Brick work with FALG bricks of class designation 7.5 in superstructure above
plinth level up to floor V level in all shapes and sizes in :
-
-
-
... More
Cement mortar 1:4 (1 cement : 4 coarse sand)
10.53
6548
68950.97
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
15.44
8482
130968.26
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending,
placing in position and binding all complete upto plinth level.
-
-
-
... More
Mild steel and Medium Tensile steel bars
1804.06
101
182661.07
... More
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3
coarse sand), finished with a floating coat of neat cement.
-
-
-
... More
18 mm thick
12.13
430
5217.11
... More
12 mm cement plaster of mix :
-
-
-
... More
1:6 (1 cement: 6 coarse sand)
77.4
215
16675.83
... More
15 mm cement plaster on rough side of single or half brick wall of mix:
-
-
-
... More
1:6 (1 cement: 6 coarse sand)
166.44
248
41360.34
... More
12 mm cement plaster of mix :
-
-
-
... More
1:4 (1 cement: 4 coarse sand)
91.35
229
20951.12
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S.
15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.
-
-
-
... More
Size of Tile 600x600 mm
102.5
1195
122518.25
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry,
but excluding the cost of nosing of steps etc. complete.
-
-
-
... More
40 mm thick with 20 mm nominal size stone aggregate
20.88
427
8918.89
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of
approved steel primer all complete.
425.78
104
44366.28
... More
Providing and applying white cement based putty of average thickness 1 mm, of
approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
335.2
94
31508.8
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone
additives of required shade:
-
-
-
... More
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including
priming coat of exterior primer applied @ 2.20 kg/10 sqm)
77.4
129
10007.82
... More
Distempering with oil bound washable distemper of approved brand and
manufacture to give an even shade :
-
-
-
... More
New work (two or more coats) over and including water thinnable priming coat
with cement primer
257.8
115
29737.23
... More
Painting with synthetic enamel paint of approved brand and manufacture of
required colour to give an even shade :
-
-
-
... More
Two or more coats on new work over an under coat of suitable shade with ordinary
paint of approved brand and manufacture
40.43
139
5631.9
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
... More
110 mm diameter
12
250
3004.2
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using
2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer- in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer- in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
-
-
-
... More
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
103.94
1169
121516.25
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C.
projections.
5.3
45
243.54
... More
Centering and shuttering including strutting, propping etc. and removal of form for
-
-
-
... More
Suspended floors, roofs, landings, balconies and access platform
136
556
75724.8
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
-
-
-
... More
All kinds of soil
39.6
152
6027.12
... More
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded
stone aggregate 40 mm nominal size derived from natural sources)
13.2
4895
64614.66
... More
Brick work with FALG bricks of class designation 7.5 in foundation and plinth in:
-
-
-
... More
Cement mortar 1:4 (1 cement : 4 coarse sand)
30.36
5435
165018.74
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry,
but excluding the cost of nosing of steps etc. complete.
-
-
-
... More
40 mm thick with 20 mm nominal size stone aggregate
101.2
427
43227.58
... More
Construction of granular sub-base by providing well graded material like natural sand crushed gravel or crushed stone having CBR 30, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator or plant mix method at OMC, and compacting with vibratory rollers of 80 to 100 kN static weight to achieve the desired density, complete as per Clause 401 of Specification
44
1783
78465.64
... More
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
440
768
338096
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
1155
301
348694.5
... More
Electrical Part
-
-
-
... More
Wiring for light point / fan point / exhaust fan point / call bell point with 1.50 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable G I box and earthing the point with 1.50 sq. mm FRLS PVC insulated copper conductor single core etc. as required.
-
-
-
... More
Group A
154
607
93575.02
... More
Supplying and fixing of following modular switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required. modular base and cover plate for modular switches in recess etc. as required.
-
-
-
... More
5 / 6 Amp Switch
154
72
11092.62
... More
15 / 16 Amp Switch
19
111
2125.34
... More
3 pin 5 / 6 A socket outlet
22
94
2069.32
... More
6 pin 15 / 16 A socket outlet
19
148
2817.7
... More
Supplying and fixing metal box of following sizes (normal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.
-
-
-
... More
Supply and fixing of metal box150mm x 75mm x 60mm deep
22
139
3076.26
... More
Providing and laying of up to 35 sqmm cable laying including all comlete
150
466
70009.5
... More
Supplying and fixing 5 A to 32 A rating, 250 / 415 V, 10 Ka, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. required.
-
-
-
... More
Single pole
36
168
6071.04
... More
Supply and fixing following rating, double pole, 240 V,isolator in the existing MCB DR
-
-
-
... More
40 A
3
287
861.84
... More
Supplying and laying 6 SWG G.I wire at 0.50 meter below ground level for conductor earth electrode
15
37
559.2
... More
Supply, Installation, Testing and Commissioning of 1200 mm swee, BEE 5 star rated, ceiling fan with brush less direct current (BLDC) motor, class of insulation B 3 nos blades, 30 cm long down rod 2 nos canoies shacle kit safety rope
48
2025
97240.32
... More
Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required.
-
-
-
... More
2 x 45 sq. mm + 1 X 45 sq. mm earth wire
75
169
12711.75
... More
2 x 2.5sq. mm + 1 X 2.5sq. mm earth wire
375
141
53070
... More
Supply and fixing of LED tube light with batten suitable for upto 1x22 watt LED tube light fitting complete in all
56
782
43792
... More
Wiring for light point / fan point / exhaust fan point / call bell point with 1.50 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable G I box and earthing the point with 1.50 sq. mm FRLS PVC insulated copper conductor single core etc. as required.
-
-
-
... More
Group A
138
607
83852.94
... More
Supplying and fixing of following modular switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required. modular base and cover plate for modular switches in recess etc. as required.
-
-
-
... More
5 / 6 Amp Switch
138
72
9940.14
... More
15 / 16 Amp Switch
19
111
2125.34
... More
3 pin 5 / 6 A socket outlet
22
94
2086.92
... More
6 pin 15 / 16 A socket outlet
19
151
2870.9
... More
Supplying and fixing metal box of following sizes (normal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.
-
-
-
... More
Supply and fixing of metal box150mm x 75mm x 60mm deep
22
139
3076.26
... More
Providing and laying of up to 35 sqmm cable laying including all comlete
150
466
70009.5
... More
Supplying and fixing 5 A to 32 A rating, 250 / 415 V, 10 Ka, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. required.
-
-
-
... More
Single pole
36
168
6071.04
... More
Supply and fixing following rating, double pole, 240 V,isolator in the existing MCB DR
-
-
-
... More
40 A
3
287
861.84
... More
Supplying and laying 6 SWG G.I wire at 0.50 meter below ground level for conductor earth electrode
15
37
559.2
... More
Supply, Installation, Testing and Commissioning of 1200 mm swee, BEE 5 star rated, ceiling fan with brush less direct current (BLDC) motor, class of insulation B 3 nos blades, 30 cm long down rod 2 nos canoies shacle kit safety rope
32
2025
64826.88
... More
Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required.
-
-
-
... More
2 x 45 sq. mm + 1 X 45 sq. mm earth wire
75
169
12711.75
... More
2 x 2.5sq. mm + 1 X 2.5sq. mm earth wire
375
141
53070
... More
Supply and fixing of LED tube light with batten suitable for upto 1x22 watt LED tube light fitting complete in all
56
782
43792
... More
Wiring for light point / fan point / exhaust fan point / call bell point with 1.50 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable G I box and earthing the point with 1.50 sq. mm FRLS PVC insulated copper conductor single core etc. as required.
-
-
-
... More
Group C
50
838
41949
... More
Supplying and fixing suitable size G I box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
16
339
5437.28
... More
Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required.
-
-
-
... More
2 x 1.50 sq. mm + 1 X 1.50 sq. mm earth wire
120
123
14847.6
... More
2 x 2.5sq. mm + 1 X 2.5sq. mm earth wire
80
141
11321.6
... More
2 x 4.0 sq. mm + 1 X 4.0 sq. mm earth wire
180
169
30508.2
... More
2 x 6.0sq. mm + 1 X 6.0sq. mm earth wire
80
211
16880.8
... More
2 x 10.00 sq. mm + 1 X 6.00 sq. mm earth wire
40
277
11118.4
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess i/c cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
25mm
150
76
11440.5
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
36
289
10433.88
... More
Supplying and fixing of following size / modules, G I box along with modular base and cover plate for modular switches in recess etc. as required.
-
-
-
... More
6 Module (200 mm x 75 mm)
2
282
564.4
... More
8 Module (125 mm x 125 mm)
8
324
2596.56
... More
12 Module (200 mm x 150 mm)
12
367
4413.48
... More
Supplying and fixing suitable size G I box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
10
419
4194.9
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface / recess, complete with tinned copper bes bar, neutral bus bar, earth bar, din bar,interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
6 way, double door
3
1407
4222.89
... More
12 way, double door
4
1739
6959.32
... More
Supplying and fixing following way surface / recess mounting, horizontal call type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (But without MCB and incomer) as required.
-
-
-
... More
4 way (4 + 12), double door
1
2600
2600
... More
Supplying and fixing 5 A to 32 A rating, 250 / 415 V, 10 Ka, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. required.
-
-
-
... More
Single pole
44
168
7420.16
... More
Supply and fixing following rating, double pole, 240 V,isolator in the existing MCB DR
-
-
-
... More
63 Amp
5
326
1631.35
... More
Supply and fixing following rating, double pole, 415 V,isolator in the existing MCB DR
-
-
-
... More
63 Amp
2
711
1422.02
... More
supply and fixing of call bell /buzzer suitable for single phase 230 volt comp in all in respect
2
77
155.92
... More
Installation, testing and commissioning of ceiling fan, including wiring of the down rods of standard length (upto 30 cm) with 1.50 sq. mm, FRLS PVC insulated, copper conductor, single core cable including providing and fixing phenolic laminated sheet cover on the fan box etc.. as required.
36
172
6193.08
... More
Installation, of exhaust fan in the existing opening, including maing good the damage, connection, testing, commissioning etc as required
-
-
-
... More
Upto 450 mm sweep
4
307
1230.52
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.10 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
-
-
-
... More
Above 35.00 sq. mm and upto 95.00 sq. mm
90
286
25779.6
... More
Supply and laying of 25 mm x3 mm GI Strip from earth electrode directly in the ground as required complete in all resect
20
90
1800
... More
Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanised), Length up to 3000 mm, outer pipe dia 50 mm inner pipe dia 25 mm, terminal dia 12 mm, outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with hot dip galvanization upto 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity with 30 cm square C.I. frame with hinged cover and masonary housing, (from apron to switch board cost of 25 x 3 mm G I strip will be extra) . Make: C.P.R.I. Certified.
2
10040
20080
... More
Supply and fixing of 16 gauge M S drum with louvers duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect
4
810
3240
... More
Supply and fixing of LED Street Light fitting with mandatory driver set having die cast aluminium body and lences suitable for 75 Watt to 90 Watt, confirming to IP 65/66 protection having Company LOGO Engraved complete in all respects including labour.
25
1190
29750
... More
Supply and fixing of LED Street Light fitting with mandatory driver set having die cast aluminium body and lences suitable for 75 Watt to 90 Watt, confirming to IP 65/66 protection having Company LOGO Engraved complete in all respects including labour. Mid power LED with lences, 100 lm / Watt, PF 0.95, THD 10 % at full load, CRI 70, Potted driver set (not circulatory) cat AAA
1
8850
8850
... More
S/F of LED bulb 9 watt ISI
20
170
3400
... More
Supply and fixing of heavy duties exhaust fan 12'' dia ISI double ball bearing metalic Usha/ Crompton/Bajaj mae
4
2600
10400
... More
Supply and fixing of exhaust fan luvers 12'' dia
4
500
2000
... More
S/f of ceiling fan 48'' sweep single star rated Usha/ crompton/Baja mae
7
2150
15050
... More
Supply and fixing of extension board 3 pin pluge
6
550
3300
... More
Supply of Al Armoured cable 16 sqmmx 4 core (main pannel to computer lab)
90
301
27090
... More
Supply and fixing of copper lugs for MCB DB connection
1
2000
2000
... More
wire point of invertor point for fan light plug within 5 sqmm copper wire
72
132
9504
... More
S&F of Kit-Kat fuse 100 amp with ply wooden board and hole fasner with connection wit new trail link
1
4000
4000
... More
Supply laying of service cable 10x2 core weather proof
100
45
4500
... More
Wiring for light point / fan point / exhaust fan point / call bell point with 1.50 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable G I box and earthing the point with 1.50 sq. mm FRLS PVC insulated copper conductor single core etc. as required.
-
-
-
... More
Group C
120
838
100677.6
... More
Wiring of twin control light point with 1.50 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with 2 way Madular type swith suitable size Modular swith, modular plate,suitable GI box and earthing the point with 1.50 sq. mm FRLS PVC insulated copper conductor single core etc. as required.
1
895
895.76
... More
Supplying and fixing suitable size G I box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
34
127
4342.82
... More
Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required.
-
-
-
... More
2 x 1.50 sq. mm + 1 X 1.50 sq. mm earth wire
300
127
38319
... More
2 x 2.5sq. mm + 1 X 2.5sq. mm earth wire
150
141
21228
... More
2 x 4.0 sq. mm + 1 X 4.0 sq. mm earth wire
390
169
66101.1
... More
2 x 6.0sq. mm + 1 X 6.0sq. mm earth wire
100
211
21101
... More
2 x 10.00 sq. mm + 1 X 6.00 sq. mm earth wire
80
277
22236.8
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess i/c cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
25mm
250
76
19067.5
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
50
289
14491.5
... More
Supplying and fixing of following size / modules, G I box along with modular base and cover plate for modular switches in recess etc. as required.
-
-
-
... More
6 Module (200 mm x 75 mm)
5
282
1411
... More
8 Module (125 mm x 125 mm)
10
324
3245.7
... More
12 Module (200 mm x 150 mm)
12
367
4413.48
... More
Supplying and fixing suitable size G I box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
20
419
8389.8
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface / recess, complete with tinned copper bes bar, neutral bus bar, earth bar, din bar,interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
6 way, double door
1
1407
1407.63
... More
12 way, double door
4
1739
6959.32
... More
Supplying and fixing following way surface / recess mounting, horizontal call type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (But without MCB and incomer) as required.
-
-
-
... More
4 way (4 + 12), double door
2
4091
8182
... More
Supplying and fixing following way surface / recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (But without MCB and incomer) as required.
-
-
-
... More
4 way (4 + 12), double door
1
7512
7512
... More
Supplying and fixing 5 A to 32 A rating, 250 / 415 V, 10 Ka, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. required.
-
-
-
... More
Single pole
64
256
16384
... More
Supply and fixing following rating, double pole, 240 V,isolator in the existing MCB DR
-
-
-
... More
63 Amp
8
527
4216
... More
Supply and fixing following rating, double pole, 415 V,isolator in the existing MCB DR
-
-
-
... More
63 Amp
3
1034
3102
... More
supply and fixing of call bell /buzzer suitable for single phase 230 volt comp in all in respect
1
99
99
... More
Installation, testing and commissioning of ceiling fan, including wiring of the down rods of standard length (upto 30 cm) with 1.50 sq. mm, FRLS PVC insulated, copper conductor, single core cable including providing and fixing phenolic laminated sheet cover on the fan box etc.. as required.
60
339
20340
... More
Installation, of exhaust fan in the existing opening, including maing good the damage, connection, testing, commissioning etc as required
-
-
-
... More
Upto 450 mm sweep
3
450
1350
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.10 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
-
-
-
... More
Above 35.00 sq. mm and upto 95.00 sq. mm
90
405
36450
... More
S&F of 200 Am four pole change over switch on 50mm x 50mm x 6mm angle frame including the cost of labour T&P painting and other material required for proer completion of the work as per direction and satisfaction of engineer in charge
1
14040
14040
... More
Supply and laying of 25 mm x3 mm GI Strip from earth electrode directly in the ground as required complete in all resect
20
90
1800
... More
Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanised), Length up to 3000 mm, outer pipe dia 50 mm inner pipe dia 25 mm, terminal dia 12 mm, outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with hot dip galvanization upto 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity with 30 cm square C.I. frame with hinged cover and masonary housing, (from apron to switch board cost of 25 x 3 mm G I strip will be extra) . Make: C.P.R.I. Certified.
2
10040
20080
... More
Supply and fixing of 16 gauge M S drum with louvers duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect
3
810
2430
... More
Supply and fixing of LED Street Light fitting with mandatory driver set having die cast aluminium body and lences suitable for 75 Watt to 90 Watt, confirming to IP 65/66 protection having Company LOGO Engraved complete in all respects including labour.
70
1190
83300
... More
Supply and fixing of LED Street Light fitting with mandatory driver set having die cast aluminium body and lences suitable for 75 Watt to 90 Watt, confirming to IP 65/66 protection having Company LOGO Engraved complete in all respects including labour. Mid power LED with lences, 100 lm / Watt, PF 0.95, THD 10 % at full load, CRI 70, Potted driver set (not circulatory) cat AAA
2
8850
17700
... More
S/F of LED bulb 9 watt ISI
30
170
5100
... More
Supply and fixing of heavy duties exhaust fan 12'' dia ISI double ball bearing metalic Usha/ Crompton/Bajaj mae
3
2600
7800
... More
Supply and fixing of exhaust fan luvers 12'' dia
3
500
1500
... More
S/f of ceiling fan 48'' sweep single star rated Usha/ crompton/Baja mae
40
2150
86000
... More
Supply and fixing of extension board 3 pin pluge
6
550
3300
... More
S/F required lugs, gland etc
1
5000
5000
... More
Supply of Al Armoured cable 16 sqmmx 4 core (main pannel to computer lab)
90
301
27090
... More
Wiring point of invertor point for fan, light plug within 1.5 sqmm copper wire
80
132
10560
... More
Supply and fixing of MCCB 100 Amp
1
3880
3880
... More
S&F of Kit-Kat fuse 100 amp with ply wooden board and hole fasner with connection wit new trail link
1
4000
4000
... More
Total impact of GST for the purpose of CTC
1
3897317
3897317.73
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%