North Central Railway Tender

- Modification to existing drawings for stns. provided with Level Crossing gate MACLS such as circuit diagram, cable route plan, cable core chart, power supply diagram, Signal lamp/LED card, battery history card etc. interconnection drawing with Relay Room and Equipment room etc. 1 Locking table and dog chart on the basis of approved signaling plan. Square sheet, modification/ preparation of cable termination chart in Relay Room and Apparatus Cases, Apparatus cases Wiring Plan, Cable Insulation chart, Earth resistance chart, circuit route termination chart, equipment disposition plan, Fuse analysis chart, terminal analysis and contact analysis plans, Station Working Rule Diagram (SWRD), SWR etc. It shall include existing system/drawing which is functional at station. (Inspection By Consignee)

Fixing, wiring, testing and commissioning of Electrical Point Machine on the Wooden/PRC sleepers at points as per standard practice and as per section of rails used. Item includes fixing switch extension bracket, providing insulation for switch extension bracket, fixing ground connection, adjusting opening of the switches and adjusting the point machine with crank handle.The item also includes : (i)Complete material for installation like ground-connections, switch extension brackets, point insulation material, I pipes, wiring materials, various fixing nuts & bolts including castle nuts, spring washers (ii) All smithy & fitting works required at site for complete installation. (iii) 2 Installation of gauge tie plate & providing insulation for gauge tie plate (Insulation in William Stretcher Bar will be provided by Railways). (iv) Wiring inside the point machine, insertion and termination of tail cable in point machine and junction boxes / location box /cable hut as per extent practice on NCR and the instruction of Railway Engineer at site. (v) Supply and fixing of bend pipes with welded frame for cable entry to machine (vi) Supply and filling of industrial grade/good quality lubricant/grease/oil for smooth opertion of point machine Note ; The ground connections shall be suitable to the Point Machines as specified by Engineer-in-charge and shall be suitable to the point lay out i.e. 60 Kg. / 52 Kg / 90R as per yard layout. Electrical Point Machine and M-6 / Screw less terminals will be supplied by Railways / covered in Schedule separately.(Inspection By Consignee)

Supply of stretcher bar insulation complete set consisting of the following:- Plate-T 10367-1 No., Bush T- 10368- 3 Nos. and washer-T- 10371 -6 Nos.(Inspection By Consignee).