New Okhla Industrial Development Authority Tender

SITC of Outdoor Architectural 1200mm LED Non Integral Linear Wallwash luminaire with System wattage not more than 30W, System efficacy ≥45LPW, CCT RGBW (W=3000K) with 4in1 LED chip for uniform illumination ensuring every LED in Luminaire reproducing same color at all time, System lumen output should not be less than 1800lm(±10%) with all RGBW channels ON, Fixture should be compatible with DMX512 and able to reproduce 16Million Colors with 256Step Dimming, Fixture should be compatible with Non-Integral 24V DC CV Driver Placed in IP Rated Box , Single piece Housing made of Extruded Aluminium with Aluminium End caps ensuring optimum thermal management, Heat Resistant Clear tempered Glass with Secondary PMMA lens with Available Precise Beam angles 10°X30° . Ingress Protection ≥ IP66 with Impact Resistance ≥ IK05. Remote type Driver should be high efficiency isolated constant voltage driver with Protection Class 1. Fixture should have inbuilt 4 channel decoder. Total Surge protection of 6KV Internal & 20KV or More Additional SPD, No-load protection, Over voltage protection, & Short circuit protection, Life 60,000 B Hrs@L70, CRI80 (for While LED), THD10% , PF0.95, Voltage Range 140-270V AC, Operating Temp 0 to +50°C, Operating Humidity 10-90%, Fixture weight should not be more than 3KG (±5%) to avoid excessive load on facade structure. Fixture should come with min. 0.5Mtr. long loop in loop out cable with ≥IP66 connector, Light Engine PCB should be Metal Core PCB made of high grade Al 5052 with ≥70 micron copper thickness & 2 W/mk thermal conductivity for better life & thermal maintenance for light Engines. Manufacturer emblem/logo embossed into the Aluminium housing/End Caps to allow OEM identification & traceability till the life of the fixture. Suitable for mounting on surface using inbuilt mounting brackets with 180° tilt adjustment at site . Contractor should make necessary provisions for proper installation of

luminaires at site with exceptional workmanship considering all safety standards. Luminaire Dimensions for ref. L=1200mm, W=60mm(±5%), H=60mm(±5%) .Manufacturer should have BIS with R No. , LM79 from NABL Accredited Lab, TTC from NABL Accredited Lab, LM80, Photometric & illumination Code Diagram, Technical Data sheet soft copy for submission if requested by Engineer in-charge. Fixture should have Silver Grey/Black (As per selection by Engineer In-charge) Nano technology powder coating , Luminaire should comply with Performance & safety standards IEC 60598/ IEC60950 , IEC 60529, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015Make: Color Kinetics/LT/ Unilamp/Traxon/ Thorn/NERI/Jaquar ) Complete in all respects as per direction of E/I

SITC of Outdoor LED System wattage not more than 80W, System efficacy100LPW (±5%), CCT=3000Kfor uniform illumination ensuring every LED in Luminaire reproducing same color at all time. Fixture should have Integral Driver Fixture should be compatible for DMX512 .Housing should be extruded Aluminium alloy ensuring optimum thermal management , Fixture should be available in diffused optics wi (As per approved concept & Site requirement). Secondary Lens should be of PMMA material & covered with Heat Resistance Toughened Glass / PC cover, Ingress Protection should not be less than IP66, Impact Resistance should be IK08 or more. Total Inbuilt and Additional Surge protection of more than or equal to 6KV Internal + 20KV Additional SPD along with other necessary protections No Load protection, Over voltage protection, Short circuit protection. LED Life should be 50,000 B Hrs@L70 B10, , PF0.95, Operating voltage range 140-270V AC, Operating ambient Temp 0 to +50°C, Operating Humidity 10-90% Powder coating should be corrosion resistant Nano technology powder coating in Silver grey colour. Standard Power cable should have IP67 connector. Technical Data Sheet, Type test Certificate from In-House NABL accredited Lab should be submitted on request. Manufacturer/OEM emblem/logo should be embossed into the Aluminium housing to allow identification of OEM & traceability till the life of the fixture. Manufacturer/OEM should have complete manufacturing set up in India with In-house capability of Housing, PCB & Driver Manufacturing and In-House NABL Accredited LAB for Electrical & photometry testing. Luminaire should comply with Performance & safety standards IEC 60598/ IEC60950 , IEC 60529, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015 ( Make: Color Kinetics/LT/ Unilamp/Traxon/ Thorn/NERI/Jaquar ) Complete in all respects as per direction of E/I