New Okhla Industrial Development Authority Tender

CLIFF CORNER TABLE - Supplying & placing center table with an overall size 450mm X 450mm X 450mm. The top of the table shall be made up of 12mm thick toughened glass. The top profile shall be in square shape with round corner and the edges shall be in chamfer shape. The top shall be supported on MS chrome plated oval frame with cross-section area 40mm X 20mm with 1.6mm thick. The under structure shall consist of four legs made of MS chrome plated oval pipe having cross-section area 52mm X 26mm with 1.6mm thick. There shall be co-polymer polypropylene shoe provided at the bottom to avoid scratches on the floor. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. Make-Godrej, Steelcase, Herman-Miller, Geeken, Rockworth, Royalsafe, Viak, Featherlite

Providing and supplying a visitor chair with ergonomic design for user comfort & aesthetically appealing. The seat and back shall be made of hot pressed commercial plywood 15mm thick and 12mm thick padded with high resilience polyurethane foam 40mm thick having density 40kg/m³ in seat and 40mm thick having density 32kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The chair shall be supplied with cushion arm with leatherite covering top mounted on metal frame. The frame structure shall be supported by four legs made up of MS CRCA powder coated 50-60µ thick tubular pipe of size 40mm X 20mm with 1.6mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 490±10 mm(D) X 560±10 mm(W) and back size shall be 530±10 mm(W) X 420±10 mm(H) from seat. Overall height shall be = 860±10 mm, overall depth = 690±10 mm & overall width = 620±10 mm. Make-Godrej, Steelcase, Herman-Miller, Geeken, Rockworth, Royalsafe, Viak, Featherlite

Providing and supplying medium back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of 15mm thick hot pressed commercial plywood padded with high resilience moulded polyurethane foam 50mm thick having density 45kg/m³ in seat and 45mm thick having density 35Kg/m³ in back. The same shall be upholstered with fabric tapestry 1mm thick and 300 GSM. The back and base of chair shall be supplied with polypropylene/ABS moulded cover and the backrest shall be made by keeping the natural curvature of the spine with back support. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine and the armrest shall be used black integral polyurethane arm with metal insert completely joint with seat and back. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal should have five legged injection moulded in black 30% glass filled nylon having pitch circle Dia. 650±15 mm and fitted with 5 nos. twin wheel castors. The castors of the chairs should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 485±10 mm(W) X 450±10 mm(D) and back size shall be 480±10 mm(W) X 400±10 mm(H) from seat. Overall height shall be 810±10 mm. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. Make-Godrej, Steelcase, Herman-Miller, Geeken, Rockworth, Royalsafe, Viak, Featherlite