Municipal Corporation Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Municipal Corporation Tender
Civil And Construction
Building Construction
Eprocure
Opening Date17 Feb 2025
Closing Date11 Mar 2025
Tender Amount₹ 8,17,50,000
Technical
Technical
Bid Capacity
... View More
Bid Capacity = (A*N*2.0 - B) Where:
A = Maximum value of civil engineering works executed in any one year during the last Three years
B = Value of existing commitments and on-going works to be completed during the next 18 months
N = Number of years prescribed for completion of work for which Bid is invited up to place of decimals. The value of B can be related to the formula: 9 = (3 x 7 x #), where # is not defined. However, the exact formula for bid capacity is not clearly defined, but the requirements can be summarized as follows: - Average Annual Turnover = Total Turnover for 3 years / 3 ≥ Rs. 5 Crore
- Liquid Assets/Credit Facilities ≥ Rs. 5 Crore The bid capacity should be equal to or more than the total bid value.
Technical Capacity
... View More
The bidder should have a minimum of 3 years' experience in similar works, which can be demonstrated by completing one similar work of not less than Rs. 655 Lakh, or two similar works of not less than Rs. 490 Lakh, or three similar works of not less than Rs. 330 Lakh. For specific areas, the required experience is as follows:
* Pile Work: Two similar works each costing not less than 40% of the cost of this job in tender, or one similar work costing not less than 60% of the cost of this job in tender.
* Water Proofing work: The bidder should have completed similar work costing not less than 60% of the cost of the current job in the tender. Alternatively, three similar works each costing not less than 30% of the cost of this job in tender, or two similar works each costing not less than 40% of the cost of this job in tender, or one similar work costing not less than 60% of the cost of this job in tender.
* UPVC Window work: Three similar works each costing not less than 30% of the cost of the current job in the tender, or two similar works each costing not less than 40% of the cost of the current job in the tender, or one similar work costing not less than 60% of the cost of the current job in the tender. No specific percentage of similar works completed is mentioned for the general experience requirement. However, for specific areas like Pile Work, Water Proofing work, and UPVC Window work, the percentages of the cost of the current job in the tender are specified.
Costs
EMD
₹ 16,35,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_NNAMC_1007470_1Tender No
Zone office khuldabadTender Authority
Municipal Corporation ViewPurchaser Address
-Website
http://etender.up.nic.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
93.32
5006
467236.44
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. Concrete of M25 grade with minimum cement content of 330 kg /cum For Lintel Band
4.77
7247
34570.07
... More
As in item 4 above but for slabs in M-25
259.48
7247
1880553.8
... More
As in item 4 but for the lighter beams in M-25
165.98
7247
1202922.46
... More
As in item 4 but for the Footing in M-25
180.03
6985
1257688
... More
As in item 4 but for the Column in M-25
90.51
7247
655961.63
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more.
924.33
7926
7327140.8
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc
5942.25
175
1041006.44
... More
Centering and shuttering including strutting, propping etc. and removal of form for
1
1
1
... More
Foundations, footings, bases of columns, etc. for mass
concrete
208.79
288
60179.59
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
814.05
706
575171.5
... More
Suspended floors, roofs, landings, balconies and access
platform with water proof ply 12 mm thick
1771.94
755
1339363.38
... More
Lintels, beams, plinth beams, girders, bressumers and
cantilevers with water proof ply 12 mm thick
1274.65
618
788795.8
... More
Diluting and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
631.15
227
143830.72
... More
Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand)
53.74
4626
248651.5
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
333.1
6692
2229396.08
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement :3 coarse sand)
1248.64
845
1055871.84
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
116.55
1758
204964.57
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood
2.91
85642
249219.44
... More
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 2nd class teak wood beading 62X19 mm.
245.22
961
235812.69
... More
Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws 30 mm thick shutters Second class teak wood.
117.81
3306
389535.35
... More
Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete.
234.9
3673
862860.4
... More
Providing and fixing bright finished brass each butt each with necessary screws etc. complete
1
1
1
... More
125x85x5.5mm(heavy type)
61
197
12044.92
... More
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :
1
1
1
... More
250x10 mm
61
324
19799.14
... More
Providing and fixing bright finished brass door latch with necessary screws etc. complete.
1
1
1
... More
300x16x5 mm
61
236
14445.84
... More
Providing and fixing bright finished brass handles with screws etc. complete.
1
1
1
... More
125 mm
122
188
23013.81
... More
Providing and fixing bright finished brass hangging type floor door stoper with necessary screws etc. compelte.
61
89
5454.18
... More
15 MM THICK PLINTH PLASTER
1
1
1
... More
(1)1 cement : 4 coarse sand
52.85
302
15995.08
... More
15mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
1551.88
302
469655.14
... More
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
3808.33
252
961918.46
... More
6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.
2378.67
291
693472.1
... More
Making grooves 10 to 12 mm widex 8mm deep in plaster of the wallor in ceiling vertically or horizontally as required.
1209.61
57
69702.57
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
123.27
451
55648.64
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than .08% and conforming to IS:15622 of approved makes in all colors and shades laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand ) jointing with grey cement slurry @3.3kg/ sqm including grouting the joints with cement and matching pigments etc. completet
1
1
1
... More
Size of tile 600x600mm
1722.61
1141
1966851.55
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,
mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.50 sqm
108.94
3775
411268.16
... More
Providing and fixing Ist quality ceremic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in all colors shades except burundy , bottle green, black of any soze as approved by engoneer in charge in skirting , risers of steps, daddos, over 12mm thick bed of cement mortar 1:3 (1 ccement :3 coarse sand ) and jointing with grey cement slurry @3.3kg/ sqm including grouting the joints with cement and matching pigments etc. complete
193.95
931
180750.39
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
7791.74
114
893687.25
... More
Finishing walls with textured exterior paint of required
shade : New work (Two or more coats applied @
3.28 ltr/ 10 sqm) over and including priming
coat of exterior primer applied @ 2.20 kg/ 10
sqm
1604.73
164
263730.96
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacture's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work
442.56
177
78636.83
... More
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work
6187.01
133
824225.74
... More
French spirit polishing: Two or more coats on works including a coat of wood filler.
373.14
327
122387.59
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with
water proofing compound conforming to IS : 2645 and
approved by Engineer-in-charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
With average thickness of 120 mm and minimum
thickness at khurra as 65 mm.
1047.53
1238
1297031.74
... More
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.10 x 60 mm
228
101
23067.39
... More
Cinder filling in Sunkan portion.
58.05
2000
116100
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
131.17
453
59489.76
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc
1
1
1
... More
For fixed portion :21.1.1.2 Powder coated aluminium (minimum
thickness of powder coating 50 micron)
3053.7
390
1191588.86
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
1
1
1
... More
Powder coated aluminium (minimum
thickness of powder coating 50 micron)
3523.5
466
1643081.16
... More
Blinds: Providing & fixing of Rollar Blinds including all necessary Fiitings , T&P all complete in direction of engineer in charge. (Make Macc / Hunterdouglous/Vista)
243.54
1614
393219.68
... More
Providing & Fixing of (Armstrong / USG Boral / Hunterdouglous) Soft Fibre Acoustical Suspended Ceiling System with Optra Beveled Tegular Edge Tiles With Armstrong Suprafine 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Colour Black, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600x600x15mm, suitable for Green Building application, with Recycled content of 66% GW & 74% RW. The tile shall be laid on Armstrong Suprafine 32 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm & pull out strength of 100Kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong make. INSTALLATION: To comprise main runner spaced at 1200mm securely fixed to the structural soffit using Armstrong suspension system (specifications below) at 1200mm maximum. The First/Last Armstrong suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum. Installation to be carried out by Armstrong Trained Installation team & Installation should be carried out as per Armstrong recommended procedure. ARMSTRONG SUSPENSION SYSTEM accessories manufactured and supplied by Armstrong World Industries consisting of M6 Anchor Fasteners with hanger hole, pre Straightened Hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum pull strength of 110 kgs. (Adjustable hook clips of 0.7mm thick, galvanized spring steel can also be used for installation purpose as an additional accessory. The adjustable clip also consists of a 4 mm aquiline wire to be used with the main runner).
913.61
3540
3234179.4
... More
False Ceiling:-2: Providing & fixing of Gypsum False Ceiling with Murga jali & support of sal wood frame including Gypsum and required boards with putty, punning & required plaster of paris given an smooth surface including T&P etc. all complete in directin of engineer in charge.
609.07
3180
1936842.6
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with
necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
2420
567
1373867.88
... More
Cost of Internal Electrification
1
4870883
4870883.02
... More
Cost of Plumbing Work
1
1764129
1764129.51
... More
Cost of fire fighting system
1
3416019
3416019.36
... More
Providing & Fixing of Geeken 3 Seater Waiting Chair with Cushion Model Magnum-3 (Make Geeken/ Featherlite/ Godrej)
10
25750
257500
... More
Providing & Fixing of Geeken Reception Table Model-1 (Make Geeken/ Featherlite/ Godrej)
1
65000
65000
... More
Providing & Fixing of Geeken Mid Back Revolving Chair Model GM-231 (Make Geeken/ Featherlite/ Godrej)
2
12900
25800
... More
BIRTH/ DEATH GRIEVENCE
1
1
1
... More
Providing & Fixing of Geeken Executive Table Mode) Classic-8 (1650x1900x750mm) (Make Geeken/ Featherlite/ Godrej)
2
45900
91800
... More
Providing & Fixing of Geeken Executive High Back Chair.Model GM-230 (Make Geeken/ Featherlite/ Godrej)
2
13200
26400
... More
Providing & Fixing of Geeken Visitor Chair Model GV-604 (Make Geeken/ Featherlite/ Godrej)
4
9750
39000
... More
Providing & Fixing of Geeken Two Seater Sofa Model Lexia (Make Geeken/ Featherlite/ Godrej)
3
33600
100800
... More
Providing & Fixing of Geeken Steel Almirah Plain GMS-41 (Make Geeken/ Featherlite/ Godrej)
1
29600
29600
... More
CLERK ROOM
1
1
1
... More
Providing & Fixing of Geeken Executive Taale Model Classic-8 (1650x1900x750mm) (Make Geeken/ Featherlite/ Godrej)
1
45900
45900
... More
Providing & Fixing of Geeken Executive High Back Chair Model GM-230 (Make Geeken/ Featherlite/ Godrej)
1
13200
13200
... More
Providing & Fixing of Geeken Visitor Chair Model GV-604 (Make Geeken/ Featherlite/ Godrej)
2
9750
19500
... More
Providing & Fixing of Geeken Penta Modular Workstation Model MAX (1500x1500mm) with Partition Panel Height 1200mm, One no. 3 Drawer Pedestal and One no. side storage (Make Geeken/ Featherlite/ Godrej)
7
57350
401450
... More
Providing & Fixing of Geeken Mid Back Revolving Chair Model GM-231 (Make Geeken/ Featherlite/ Godrej)
7
12900
90300
... More
Providing & Fixing of Geeken Wooden Storage Model-11 (900x450x1200mm) (Make Geeken/ Featherlite/ Godrej)
2
14850
29700
... More
SUPERINTENDEMT ROOM
1
1
1
... More
Providing & Fixing of Geeken Executive Table Model ExcIusive-2 (220Dmm L x 19S0mm W x 750mm H (Make Geeken/ Featherlite/ Godrej)
1
67500
67500
... More
Providing & Fixing of Geeken Executive High Back Chair Model GP-101 (Make Geeken/ Featherlite/ Godrej)
1
25500
25500
... More
Providing & Fixing of Geeken Visïtor Chair Model GP-11OA (Make Geeken/ Featherlite/ Godrej)
3
14000
42000
... More
Providing & Fixing of Geeken Storage Cabinet Model Storage-12 (Make Geeken/ Featherlite/ Godrej)
1
43000
43000
... More
Providing & Fixing of Geeken Sofa ModeIZAP-3 (Three Seater Sofa (Make Geeken/ Featherlite/ Godrej)
1
46200
46200
... More
Providing & Fixing of Geeken Center Table Model Emerald (1200x60omm) (Make Geeken/ Featherlite/ Godrej)
1
22200
22200
... More
Providing & Fixing of Geeken Wooden Storage Model-11 (900x450xI2D0mmI (Make Geeken/ Featherlite/ Godrej)
1
14850
14850
... More
REVENUE INSPECTOR ROOM
1
1
1
... More
Providing & Fixing of Geeken Executive Table Model Exclusive-2 (2200mm L x 1950mm W x 750mm H (Make Geeken/ Featherlite/ Godrej)
1
67500
67500
... More
Providing & Fixing of Geeken Executive High Back Chair Model GP-101 (Make Geeken/ Featherlite/ Godrej)
1
25500
25500
... More
Providing & Fixing of Geeken Visitor Chair Modef GP-110A (Make Geeken/ Featherlite/ Godrej)
3
14000
42000
... More
Providing & Fixing of Geeken Storage Cabinet Model Storage-12 (Make Geeken/ Featherlite/ Godrej)
1
43000
43000
... More
Providing & Fixing of Geeken Sofa Model ZAP-3 (Three Seater Sofa) (Make Geeken/ Featherlite/ Godrej)
1
46200
46200
... More
Providing & Fixing of Geeken Center Table Model Emerald (1200x600mm) (Make Geeken/ Featherlite/ Godrej)
1
22200
22200
... More
Providing & Fixing of Geeken \fiIaoden Storage Model-U (900x4SOx1200mm) (Make Geeken/ Featherlite/ Godrej)
1
14850
14850
... More
FOOD INSPECTOR ROOM (03 NOS.)
1
1
1
... More
Providing & Fixing of Geeken Executive Table ModeICIassic-8 (1800x2000x750mm) (Make Geeken/ Featherlite/ Godrej)
3
47150
141450
... More
Providing & Fixing of Geeken Executive High BackChair ModeIGP-109 (Make Geeken/ Featherlite/ Godrej)
3
17700
53100
... More
Providing & Fixing of Geeken VisitorChair ModeIGV-604 (Make Geeken/ Featherlite/ Godrej)
6
9750
58500
... More
Providing & Fixing of Geeken Back Storage Unit Model Storage-9 (1500x450x750mm) (Make Geeken/ Featherlite/ Godrej)
3
26800
80400
... More
DISCUSSION HALL
1
1
1
... More
Providing & Fixing of Geeken Conference Tabte Model-16 t2100x900mm) (Make Geeken/ Featherlite/ Godrej)
1
30000
30000
... More
Providing & Fixing of Geeken Conference Room chair Model GP-114 (Make Geeken/ Featherlite/ Godrej)
8
16400
131200
... More
STORES
1
1
1
... More
Providing & Fixing of Geeken Steel Almirah Ptain GMS-41 (Make Geeken/ Featherlite/ Godrej)
20
29600
592000
... More
SECOND FLOOR
1
1
1
... More
CONFERENCE HALL
1
1
1
... More
Providing & Fixing of Geeken Conference Table Mode)-5 (4200x1500mm) (Make Geeken/ Featherlite/ Godrej)
1
91700
91700
... More
Providing & Fixing of Geeken Conference Room chair Model GP-113 (Make Geeken/ Featherlite/ Godrej)
18
17450
314100
... More
Providing & Fixing of Geeken Conference Room Fixed Chair Model GP-115 (Make Geeken/ Featherlite/ Godrej)
16
12550
200800
... More
OFFICE STAFF
1
1
1
... More
Providing & Fixing of Geeken Recta Modular Workstation Model MAX (1200x600mm) with Partition Panel Height 1200mm, One no. 3 Drawer Pedestal. (Make Geeken/ Featherlite/ Godrej)
25
41400
1035000
... More
Providing & Fixing of Geeken Ibid Back Revolving Chair Model GM-231 (Make Geeken/ Featherlite/ Godrej)
25
12900
322500
... More
ROOM (03 NOS.)
1
1
1
... More
Providing & Fixing of Geeken Executive Table Model Classic 8 (180Ox2000x750mm) (Make Geeken/ Featherlite/ Godrej)
3
47150
141450
... More
Providing & Fixing of Geeken Executive High Back Cheir Model GP-109 (Make Geeken/ Featherlite/ Godrej)
3
17700
53100
... More
Providing & Fixing of Geeken Visitor Chair Model GV-604 (Make Geeken/ Featherlite/ Godrej)
6
9750
58500
... More
Providing & Fixing of Geeken Back Storage Unit Model Storage-9 (1500x450x750mm) (Make Geeken/ Featherlite/ Godrej)
3
26800
80400
... More
STORES / RECORD ROOM
1
1
1
... More
Providing & Fixing of Geeken Steel Almirah Plain GMS-41 (Make Geeken/ Featherlite/ Godrej)
16
29600
473600
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge.All kinds of soil
222.39
130
29014.03
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
23.05
5006
115393.18
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum
12.42
7247
90037.64
... More
All works upto plinth level, Concrete of M25 grade with minimum cement content of 330 kg /cum, As in item 6 above but 1:1.5:3 for Footing
18.41
6985
128630.82
... More
All works upto plinth level, Concrete of M25 grade with minimum cement content of 330 kg /cum, As in item 6 above but 1:1.5:3 for Column
11.35
7247
82236.54
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more.
51.35
7926
407059.3
... More
First Class M-150 brick work in 1:6 cement and coarse sand mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work.
53.61
5242
281044.84
... More
M-150 brick work in 1:6 cement and Coarse sand mortar in superstructure including supply of all material, labour and tools and plants etc required for proper completion of work for walls of 230 mm thick
50.67
6692
339118.27
... More
12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand)
640.74
252
161841.06
... More
Steel work in built up tubular (round, square or rectangular hollow tubes
etc.) trusses etc., including cutting, hoisting, fixing in position and
applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete. Hot finished seamless type tubes
4491
151
681137.62
... More
Providing and applying white cement based putty of average thickness
1 mm, of approved brand and manufacturer, over the plastered wall
surface to prepare the surface even and smooth complete.
640.74
114
73491.33
... More
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
640.74
164
105303.83
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
399.2
125
50085.43
... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
137.11
541
74214.04
... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
80.78
288
23284.39
... More
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
190.36
706
134497.93
... More
DISMENTLING WORK
1
1
1
... More
Dismantling Reinforced cement concrete or Reinforced Brick work, including stacking of materials as directed by Engineer-in-charge with in a distance of 50m.
14.4
2610
37586.43
... More
PROPOSAL WORK
1
1
1
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.
28.55
130
3725.23
... More
Sand Filling in plinth and under floor including supply of necessary quantity of sand from a necessary quantity of sand from a distance not exceeding 8Kms. From the site of work and including watering, dressing etc. labour & T& P etc. required for proper completion of the work. saplings of girth upto 30 cms. measured at a height of 1m above...
19.99
144
2879.44
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-all work up to plinth level. 1:4:8 (1 Cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size)
2.71
5006
13588.51
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works Upto plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum
7.31
6985
51039.65
... More
All works Above plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum, As in item 3 above but in Column with approved stone ballast.(Using 1:1.5:3 Mix concrete)
8.04
5733
46114.82
... More
All works Above plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum, As in item 3 but for the lighter beams i.e. having spans more than 6 m. (Using 1:1.5:3 Mix concrete)
4.47
5884
26316.98
... More
Brick work with class 150 bricks in foundation and plinth in Cement Coarse sand ( 1 Cement : 4 Coarse sand) including supply of all materials, labour, T & P and curing etc. required for proper completion of the work
0.67
5242
3491.31
... More
Brick work with class 150 bricks in Super Structure in Cement Coarse sand ( 1 Cement : 4 Coarse sand) including supply of all materials, labour, T & P and curing etc. required for proper completion of the work
3.44
6692
22991.36
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
29.94
7926
237366.44
... More
Providing and fixing Cast iron Gate including moulding, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary Cast iron nuts and bolts complete, with suitable arrangement as per approval of Engineer-in-charge,
2538
200
507600
... More
Providing and fixing bolts including nuts and washers complete
50
38
1911
... More
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
99.83
252
25215.13
... More
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture
52.2
125
6549.25
... More
Wall lining butch work upto 10m height with Dholpur stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width, including embedding every tenth layer and bottom most layer in masonry or concrete after making necessary chases
of size 75x75 mm and by providing layer of 75 mm thick strips i/c 12 mm thick bed of cement mortar 1:3 (1 Cement : 3 coarse sand) i/c ruled pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in-charge.
86.81
2304
200025.16
... More
Supplying & Laying Moulding & Carveying in sand stone by mannualil/ Machenically etc all complete of direction engineer in charge.
12.04
1545
18616.09
... More
Supplying , Testing, Installation, & Commisning Lamp Post Size of lamp 280mm width & 590 mm Height cast iron made with cast iron bracket & Stainless steel screw, corrosion and UV RAy resistant coating, sand blasted glass diffuser with LED light including Wire & Cable with Conduit etc all complete of direction engineer in charge. . (Make -Twinklelites /Havells / Orbis/ Neri)
2
15000
30000
... More
Supplying , Testing, Installation, & Commisning Lamp Post Size of lamp 280mm width & 590 mm Height cast iron made Grout in above Column & Stainless steel screw, corrosion and UV RAy resistant coating, sand blasted glass diffuser with LED light including Wire & Cable with Conduit etc all complete of direction engineer in charge. (Make -Twinklelites /Havells / Orbis/ Neri)
2
10000
20000
... More
Supplying , Testing, Installation, & Commisning Consealed LED Wall Light Traditional type including Wire & Cable with Conduit etc all complete of direction engineer in charge. . (Make -Twinklelites /Havells / Orbis/ Neri)
2
5000
10000
... More
SL no 142 to 162 is One gate estimate 2 gate X 1265016
1
1265016
1265016
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil
193.17
130
25201.63
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
128.78
5006
644783.14
... More
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush
etc. complete as per specifications and directions of Engineer-in charge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum.
Excess/less cement used as per design mix is payable/ recoverable
separately)
185.26
7220
1337639.65
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more.
72.71
7926
576393.97
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall
be measured for payment). (Precast C.C. kerb stone shall be approved
by Engineer-in-charge).
7.92
7436
58862.77
... More
First Class M-150 brick work in 1:6 cement and coarse sand mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work.
7.92
5242
41494.43
... More
Trenching in ordinary soil up to required depth including removal and stacking of serviceable materials and then disposing of as directed and spreading earth & neatly levelling, breaking clods etc. and making the trenched area with designed mounds, paths and sitting spaces etc. to proper levels by filling with earth or earth mixed with manure and properly watering complete work in required topography as per drawing & specifications.
312.37
75
23493.59
... More
Supplying and stacking of good earth at site including royalty but including carriage 1km (earth measusred in stacks will be reduced by 20% for payment).
83.3
496
41359.95
... More
Supplying and stacking at site dump manure from approved source,including carriage up to 1 km (manure measured in stacks will be reduced by8% for payment)
11.5
308
3541.28
... More
Mixing earth and manure in specified proportion or as directed.
94.79
35
3336.54
... More
Rough dressing the trenched ground including breaking the clods.
260.31
1
376.02
... More
Fine dressing the ground
260.31
3
927.51
... More
Spreading of mixed good earth and manure in specified proportions as above and in required thickness.
94.79
50
4778.88
... More
Uprooting weeds from the trenched area after 10 to 15 days after flooding with water including disposal of uprooted vegetation.
520.62
4
2456.65
... More
Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge
520.62
84
43868.74
... More
Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.
104.12
439
45758.86
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
104.12
674
70245.14
... More
Providing and displaying of Araucaria cookie having ht. 60 cm to 75 cm, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 20 cm size of Earthen pot/Plastic pot. & as per direction of the officer-in-charge.
5
181
908.11
... More
Providing and displaying of Araucaria cookie having ht. 75 cm to 90 cm, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
5
207
1036.43
... More
Providing and displaying of Areca Palm having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
5
152
760.05
... More
Providing and displaying of Croton Petra Bangalore (Specimen ) variety having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh & healthy foliage approximately 60-65 leaves in 30 cm size of Earthen pot/ Plastic pot & as per direction of the officer-in-charge.
10
518
5182.38
... More
Providing and displaying of Dieffenbachia Mosaic having ht. 30cm to 45 cmwith 10-12 leaves, well developed, fresh and healthy in 25 cm size of Earthen pot/Plastic pot. & as per direction of the officer-in-charge.
2
76
152.06
... More
Providing and displaying of Dracaena Song of India (three in one), having ht. 30 cm and above, multibranched,well developed with fresh and healthy leaves in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
4
108
434.31
... More
Providing and displaying of Dracaena warneckii having ht. 30 cm to 45 cm. with good colour foliage, well developed, fresh and healthy in 20 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
5
54
271.57
... More
Providing and displaying of Livistona palm having ht. 60 cm to 75 cm, well developed with 8 to 10 leaves, fresh & healthy foliage in 30 cm size of Earthen pot/Plastic pot. as per direction of the officer-in-charge.
5
207
1036.43
... More
Providing and displaying of Money Broad Leaves mounted on moss stick 90 cm ht., 3 to 4 s in each pot, well developed with full of fresh & healthy leaves in size of 25 cm Top dia x 18 cm Bottom dia x 25 cm Perpendicular height Earthen pot/Plastic pot. & as per direction of the officer-in-charge.
10
177
1776.74
... More
Providing and displaying of Philodendron emerald red colour mounted on moss stick 90 cm ht., having 3 s placed at equal distance, well developed with full of fresh & healthy leaves in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
10
363
3632.44
... More
Providing and displaying of Phoenix palm having ht. 75 cm to 90 cm with 10 to 15 or more leaves, well developed, fresh and healthy in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
5
207
1036.43
... More
Providing and displaying of Raphis palm having ht. 75 cm to 90 cm with 12 to 15 equal suckers, well developed, full of fresh & healthy leaves from bottom to top in 25 cm size Earthen pot/Plastic pot & as per direction of the officer-in-charge..
5
310
1554.76
... More
Providing and displaying of Schefflera Varieged, mounted on moss stick 90 cm ht., 3 to 4 s placed in each pot at equal distance, well developed with full of fresh & healthy bright leaves from bottom to top in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
5
271
1357.35
... More
Providing and Displaying of Spathiphyllum (peace lily), having 15 cm to 25 cm ht. blooming stag with fresh & healthy foliage well developed in 15 cm of Earthen pot/plastic pot as per direction of officer-in-charge.
5
88
444.18
... More
Providing and Displaying Antirrhinum Hybrid dwarf variety, specimen (8-10) with fresh & healthy foliage in full bloom well developed in 35 cm Earthen Tray/Challi Pot and as per direction of the officer-in-charge.
5
518
2591.19
... More
Providing and Displaying Cyclamen hybrid variety specimen 5-6 in a pot, fresh & healthy in full bloom well developed in 35 cm Earthen Tray/ Nand. as per direction of the officer-in-charge.
5
777
3889.08
... More
Providing and Displaying Marigold jaffri orange/yellow/Russet colour well developed with fresh & healthy foliage with 40 to 50 flowers in bloomspecimen plant 60 to 75 cm ht in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
5
145
725.62
... More
Providing and Displaying Pansy Hybrid Sakata in different colour specimen 6-8 in a pot with fresh & healthy foliage in full bloom well developed in 35 cm Earthen Tray/ Nand as per direction of the officer-in-charge.
5
310
1554.76
... More
Providing and Displaying Poinsettia dwarf multi head, having upto 30 cm ht., with 3 to 4 branches with fully different colored top with fresh & healthy foliage well developed in 20 cm Earthen Pot/Plastic Pot and as per directionof the officer-in-charge.
5
248
1243.71
... More
Providing and Displaying Star of Bethlehem (Chinchi - Rinchi), 5 to 6 plant in each Pot full bloom, with fresh and healthy foliage flower in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
5
331
1658.29
... More
Providing and Displaying Portulaca hybrid in different colour with bloom well developed fresh & healthy in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
5
82
414.57
... More
Providing and Displaying Sunflower hybrid well developed 15 to 20 cm ht. with fresh & healthy foliage at blooming stage in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
5
31
157.93
... More
Providing and Displaying Creeper Rose variety 3 to 4 healthy branch 60 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge.
2
73
146.09
... More
Providing and Displaying Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 Earthen Pot, as per direction of the officer-in-charge.
2
145
290.25
... More
Providing and Displaying Bamboo Buddha vally variety with umbrella shape having 120 to 135 ht. with fresh & healthy foliage well developed in 40 cm Cement pot multy branch, bushy as per direction of the officer-in-charge.
10
987
9870.75
... More
Providing and Displaying Bamboo Buddha Valley with fresh & healthy 5 to 6 suckers 1.80 m to 2.10m ht umbrella type well developed in 50 cm Cement Pot as per direction of the officer-in-charge.
10
1381
13819.05
... More
Providing and Displaying Bismarckia Palm 115 to 180 cm ht., well developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot as per direction of the officer-in-charge. .
10
1865
18655.72
... More
Providing and Displaying Cycus cirsnallis well developed with fresh & healthy 35 to 40 lush green leaves in 40 cm Cement Pot as per direction of the officer-in-charge.
10
1875
18754.43
... More
Providing and Displaying Cycus revoluta in 35 cm challi, specimen , having 30 to 40 with fresh and healthy, leaves having 25cm to 30cm circumfrance of base stem well developed as per direction of the officer-in-charge.
10
1140
11400.96
... More
Providing and Displaying Cycus revoluta specimen , having 45 to 50 fresh and healthy, leaves having 30cm to 35cm circumfrance of base stem well developed in 40 cm challi, as per direction of the officer-in-charge.
10
1480
14806.13
... More
Providing and Displaying Ficus black vivion piller topiary (sylinder type) well developed with fresh & healthy 180 to 210 cm ht in 40 cm Cement Pot as per direction of the officer-in-charge.
10
1974
19741.5
... More
Providing and Displaying Ficus Nuda topiary well developed with fresh & healthy 5 to 6 big ball specific size and shape 180to 210cm ht in 40 cm Cement Pot as per direction of the officer-in-charge.
10
2497
24973
... More
Providing and Displaying Ficus Retusa topiary well developed with fresh & healthy 5 to 6 big ball specific size and shape 180 to 210cm ht in 40 cm Cement Pot as per direction of the officer-in-charge.
10
2072
20728.58
... More
Providing and Displaying Ficus reginold piller type Topiary well developed with fresh & healthy 210 to 240 cm ht in 40 cm Cement Pot as per direction of the officer-in-charge.
10
2368
23689.8
... More
Providing and Displaying Ficus reginold Topiary well developed with fresh & healthy 6 to 7 big ball specific size 210 to 240 cm ht in 45 cm Cement Pot as per direction of the officer-in-charge.
10
1969
19692.39
... More
Providing and Displaying Foxtail palm well developed with fresh & healthy foliage of ht. 210 to 240 cm in big 40 cm Cement Pot as per direction of the officer-in-charge.
10
1140
11400.96
... More
Providing and Displaying Latania Rubra Palm well developed with fresh & healthy foliage 150 to 180 cm ht. with 6 to 7 leaves in big 35 cm Cement Pot as per direction of the officer-in-charge.
5
987
4935.38
... More
Providing and Displaying Mascarena palm well developed with fresh & healthy foliage leaves 150 to 180 cm ht in 35 cm Cement Pot as per direction of the officer-in-charge.
10
1776
17767.35
... More
Providing and stacking of Bottle palm of ht. 150-180 cm bottom girth 20-25 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge.
10
173
1733.4
... More
Providing and stacking of Bottle palm of ht. 270-300 cm bottom girth 40-50cm well developed in big HDPE bags as per diection of the officer-in-charge.
10
529
5296.5
... More
Providing and stacking of Ficus benjamina (green) of height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags as per direction of the officer-in-charge.
5
173
866.7
... More
Providing and stacking of Ficus bengalensis krishna of height 75-90 cm., multibranched in earthen pots of size 30 cm as per direction of the officer-in-charge
5
115
577.8
... More
Providing and stacking of Ficus nuda of height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags as per direction of the officer-in-charge.
5
182
914.85
... More
Providing and stacking of Fishtail palm of ht. 150-180 cm bottom girth 15- 20 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge.
5
192
963
... More
Providing and stacking of Fishtail palm of ht. 270-300 cm bottom girth 40- 50 cm well developed in big size HDPE bags as per direction of the officer-in-charge.
5
529
2648.25
... More
Providing and stacking of Foxtail palm of ht. 240-270 cm bottom girth 35- 40 cm well developed in big size HDPE bags as per direction of the officer-in-charge.
5
625
3129.75
... More
Providing and stacking of Magnolia grandiflora of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.
5
365
1829.7
... More
Providing and stacking of Mimusops elengi (Maulsri) of height 180-195cm., well developed with thick stem in big in big size HDPE bag as per direction of the officer-in-charge.
5
120
601.88
... More
Providing and stacking of Phoenix sylvestris Roxb. (Wild date palm/khajur) of height 150-165 cm. in Big HDPE Bag as per direction of the officer-in-charge.
5
625
3129.75
... More
Providing and stacking of Plumeria acutifolia of height 120-135 cm. with 2- 3 branches in HDPE bag of size 30 cm as per direction of the officer-in-charge.
5
105
529.65
... More
Providing and stacking of Plumeria alba dwarf dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.
5
722
3611.25
... More
Providing and stacking of Plumeria rubra of height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.
5
385
1926
... More
Providing and stacking of Polyalthia pendula (Ashok Pendula) of height 180-195 cm. in gunny bag of size 30 cm as per direction of the officer-in-charge.
5
96
481.5
... More
Providing and stacking of Saraca indica (Sita Ashok) of height 105-120 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
5
77
385.2
... More
Providing and stacking of Eugenia jambolana (Jamun) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
5
72
361.13
... More
Providing and stacking of Tabebuia sp. of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge.
2
81
163.71
... More
Providing and stacking of Tamarindus indica (Imli) of height 120-150 cm. in big polybags of size 25 cm as per direction of the officer-in-charge.
2
77
154.08
... More
Providing and stacking of Tecoma argentea of height 120-135 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.
2
77
154.08
... More
Providing and stacking of Tectona grandis (Teak) of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge.
5
105
529.65
... More
Providing and stacking of Washingtonia filifea palm stem ht. 90-105 cm with 6-7 healthy leaves lush green leaves well developed in big size HDPE Bags as per direction of the officer-in-charge.
2
385
770.4
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil
318.09
130
41498.43
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
9.32
5006
46649.79
... More
Providing and laying in position speccific grade of reincorced cement concrete excluding the cost of centering and shuttering - All work up to plinth level : 1:1.5:3(1 Cement : 1.5coarse sand:3 graded stone aggregate derived from natural sources
11.25
6648
74797.05
... More
Reinfoced Cement Concrete work in walls (of any thickness ) including ,pillasters buttresses plinth and string courses 1:1.5:3(1 Cement : 1.5coarse sand:3 graded stone aggregate derived from natural sources
15.94
7976
127132.13
... More
Reinfoced Cement Concrete work in beams, suspended floor 1:1.5:3(1 Cement : 1.5coarse sand:3 graded stone aggregate derived from natural sources
11.18
8456
94565.29
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more.
33.64
7926
266682.09
... More
Centring &shuttering of walls (any thickness) including attaches pillasters , buttresses,plinth and string courses
127.5
619
78952.78
... More
Providing and fixing in position pre cast RCC Main hole cover of required shape and approved quality
1
1
1
... More
Rectangular shape 600x450mm internal dimesnions
2
1056
2113.35
... More
Providing and laying in position speccific grade of reincorced cement concrete excluding the cost of centering and shuttering - All work up to plinth level : 1:1.5:3(1 Cement : 1.5coarse sand:3 graded stone aggregate derived from natural sources
5.06
6648
33658.67
... More
Reinfoced Cement Concrete work in walls (of any thickness ) including ,pillasters buttresses plinth and string courses 1:1.5:3(1 Cement : 1.5coarse sand:3 graded stone aggregate derived from natural sources
8.59
7976
68551.64
... More
Reinfoced Cement Concrete work in beams, suspended floor 1:1.5:3(1 Cement : 1.5coarse sand:3 graded stone aggregate derived from natural sources
5
8456
42240.43
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more.
16.22
7926
128577.59
... More
Centring &shuttering of walls (any thickness) including attaches pillasters , buttresses,plinth and string courses
68.75
619
42572.58
... More
Providing and fixing in position pre cast RCC Main hole cover of required shape and approved quality
1
1
1
... More
Rectangular shape 600x450mm internal dimesnions
2
1056
2113.35
... More
Earth work in excavation in foundation in ordinary soil (loam, clay or sand) including lift up to 1.5 m. & lead of 30 m. including filling, watering and ramming of excavated earth dressing of sides and ramming of bottoms filling of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth in 200 mm th. layers and getting out (removal of) the excavated surplus soil and disposal of surplus excavated soil as directed by engineer-in-charge up to a distance of 30 m from foundation trenches
15.23
130
1986.68
... More
Sand filling in layers up to 200 mm th. under floors including cost of sand, dressing watering, ramming each layer for proper consolidation complete with all leads & lifts etc.
1.6
514
823.79
... More
Clearing of jungle including uprooting of rank vegetation, grass, bush, wood tree and sapling of girth up to 30 cm. Measured at a height of 1 m. abopve GL and removal of rubbish upto a distance of 50 m. outside periphery of the area cleared.
19.89
12
257.32
... More
Providing and laying in cement concrete 1:4:8 (1 cement :4 Coarse sand :8 graded Stone aggregate 40 mm nominal size) and curing complete,including cost of form-work,in foundation and floors.
2.72
5006
13632.57
... More
Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
1
1
1
... More
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
19.89
227
4533.03
... More
Reinforced Cement Concrete with approved coarse sand and 2 cm. gauge approved stone ballast in the proportion 1 :1.5 : 3 (1 Cement : 1.5 Coarse sand : 3 graded Stone agg. 20 mm. nominal size) in footings and foundations excluding supply of reinforcement and its bending the same with 24 B W G I binding wire and including necessary centring shuttering etc. and also including supply of all materials, labour, T & P and curing etc. required for proper completion of the work - strength of concrete shall not be than M - 200.
0.78
6648
5174.76
... More
Reinforced Cement Concrete with approved coarse sand and 2 cm. gauge approved stone ballast in the proportion 1 :1.5 : 3 (1 Cement : 1.5 Coarse sand : 3 graded Stone agg. 20 mm. nominal size) in lintels of doors and windows excluding supply of reinforcement and its bending the same with 24 B W G I binding wire and including necessary centring shuttering etc. and also including supply of all materials, labour, T & P and curing etc. required for proper completion of the work - strength of concrete shall not be than M - 200.
0.28
7976
2230.71
... More
Reinforced Cement Concrete with approved coarse sand and 2 cm. gauge approved stone ballast in the proportion 1 :1.5 : 3 (1 Cement : 1.5 Coarse sand : 3 graded Stone agg. 20 mm. nominal size) in slab excluding supply of reinforcement and its bending the same with 24 B W G I binding wire and including necessary centring shuttering etc. and also including supply of all materials, labour, T & P and curing etc. required for proper completion of the work - strength of concrete shall not be than M - 200.
3.58
6648
23832.03
... More
Mild steel or iron work in plain work such as reinforcement for R.C.C.or R B work wrought to required shape as necessary including bending, binding and placing in position for proper completion of work and also including supply of steel and its wastage. Bend hooks and authorised over lapping shall be measured (8 mm to 32 mm TMT bars).
8.19
7926
64901.14
... More
Brick work with class 150 bricks in foundation and plinth in Cement coarse sand of 1.25 fineness modulus mortar 1 : 4( 1 Cement : 4 Coarse sand) including supply of all materials, labour, T & P and curing etc. required for proper completion of the work
5.84
5242
30600.84
... More
Brick work with class 150 bricks in superstructure above plinth level including necessary cutting and moulding of bricks as required and also including honey comb brick work in Cement Coarse sand mortar 1 : 4 in thickness of wall more than 120 mm including supply of all materials, labour, T & P and curing etc. required for proper completion of the work
11.19
6692
74905.3
... More
Half brick masonry work with class 150 bricks in Cement Fine sand of 1.25 fineness modulus mortar 1 : 4 ( 1 Cement : 4 coarse sand ) in superstructure above plinth level in wall trhickness 120 mm and below including supply of all materials, labour, T & P and curing etc. required for proper completion of the work
7.61
825
6289.11
... More
Providing and laying damp proof course 2.5 cm. thick with Cement concrete 1:1.5:3 (1 Cement :1.5 Coarse sand : 3 graded Stone aggregate 10 mm. nominal size) and curing complete including supply of approved quaity water proofing compound (in ratio as specified by manufacturers), all materials, labour, T & P etc. required for proper completion of the work
3.56
301
1075.85
... More
Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
3.56
107
382.71
... More
12 mm. Cement plaster 1 : 3 (1 Cement : 3 coarse sand ) in single coat on fair face of single or half brick wall for interior plastering including internal rounded angles, champhers and or rounded angles not exceeding 80 mm in girth and finished even and smooth and curing . No extra for mixing any additive
58.76
252
14841.76
... More
12 mm. av. th. cement plaster 1 : 3 ( 1 Cement : 3 coarse sand ) on rough side of single or half brick wall for interior plastering including internal rounded angles, champhers and or rounded angles not exceeding 80 mm in girth and finished even and smooth and curing .
63.64
252
16074.49
... More
12mm. th. Cement mortar 1 : 3 ( 1 Cement : 3 coarse sand ) plaster over ceilings and other RCC surfaces and including curing for interior plastering including internal rounded angles, champhers and or rounded angles not exceeding 80 mm in girth and finished even and smooth.
22
252
5556.82
... More
Making Grooves 10-12 mm wide x 8 mm deep in plaster - wall / ceilings vertically or horzontally and curing all complete as required per direction of engineer-in-charge as per approved pattern / specifications
16
19
317.52
... More
Add for plaster drip course/ groove in plastered surface or moulding to
R.C.C. projections.
3.62
57
208.6
... More
20 mm. thick.Cement plaster in two coats - backing coat 17 mm and finishing coat 2 mm th. overskirting with Cement mortar 1 : 2 ( 1 Cement : 2 Coarse sand ) finished with a floating coat of neat cement mixed with marble dust in standard ratio 1:5 on single or half brick wall for interior plastering including intrenal roundd angles, champhers and finished even and smooth and curing etc.
14.4
342
4932.67
... More
Providing and fixing 32 mm. thick flush door commercial quality conforming to IS 2202 part I (1983) including fixing of wooden cleats and stoppers, fixing and adjustment of hinges, bolts, locks, handles, springs, fittings with necessary screws but excluding supply of fittings all complete - single leaf both faces commercial ply .
2.52
1758
4431.67
... More
M S or iron work of small sizes and sections such as holding down bolts , hold fasts, tierods, gratings etc. (when not included in over all rates) wrought to required form including supply of steel and its wastage including cost of bolts and nuts if reuired for completion of work including fabrication of holes in door chaukhats and nosing :-
1
1
1
... More
(a) Fabrication of Angle iron door Chaukhats - 35 x 35 x 5 mm with hold fasts etc. all complete
15.6
98
1533
... More
(b) Fabrication of grill in windows, vents and railing etc. all complete
54.72
98
5377.31
... More
Providing and fixing side hung / top hung Z-section steel Ventilators of standard steel sections , joints welded with lugs 16x3.15 mm.10 cm. long all complete.(openable/ Fixed)
85.5
98
8402.04
... More
Finishing walls with textured exterior paint of approved shade as required all complete - new work (two or more coats applied @ 3.28 ltrs./ 10 sqm. over and including base coat of water proofing cement paint applied @ 2.20 kg / 10 sqm.) and curing all complete finish as directed by engineer-in-charge.
63.64
164
10459.06
... More
White washing with lime on undecorated wall surface (new work) (two or more coats) to give an even shade including thoroughly brooming to remove all dirt, dust, mortar drops and other foreign matter all complete finish.
22
6
137.45
... More
Painting two or more coats over priming coat including one priming coat on wood work surfaces up to 100 mm width or girth or small articles not exceedibg 0.10 sqm in area with superior synthetic enamel paint of approved brand and manufacture in any shade such as Luxol-3 Hi-gloss apcolite superlac, Dulux specified brushing on new work to give an even shade including thoroughly brooming to remove all dirt, dust, mortar drops and other foreign matter, sand papering and scraping including all materials, labour and T & P etc. as directed by engineer- in -charge complete finish.
5.67
70
397.99
... More
Painting two or more coats over priming coat including one priming coat on steel and other metal surfaces up to 100 mm width or girth or small articles not exceedibg 0.10 sqm in area with superior synthetic enamel paint of approved brand and manufacture in any shade such as Luxol-3 Hi-gloss apcolite superlac, Dulux specified brushing on new work to give an even shade including thoroughly brooming to remove all dirt, dust, mortar drops and other foreign matter, sand papering and scraping including all materials, labour and T & P etc. as directed by engineer- in -charge complete finish.
5.23
70
366.83
... More
Fixing panes of glass 4.8 to 5.7 mm th. with Atul or equivalent I S I marked quality glass, putty, brads and spring of approved make including supply of all approved materials, labour and T & P etc. as directed by engineer- in -charge all complete
1.8
496
893.02
... More
Fixing of steel / wooden Doors, vents, windows frames, window steel grills etc in position
1
1
1
... More
(a) door
1
58
58.8
... More
(b) Windows
1
51
51.45
... More
© Ventilator
2
29
58.8
... More
Providing and laying integral cement based water roofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing Compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height
including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed jointless cement mortar of mix 1:4 (1 cement :4 coarse
sand) admixed with water proofing compound conforming to IS : 2645
and approved by Engineer-in-charge including laying glass fibre cloth of
approved quality in top layer of plaster and finally finishing the surface with
trowel with neat cement slurry and making pattern of 300x300 mm square
3 mm deep. e) The whole terrace so finished shall be flooded with water for
a minimum period of two weeks for curing and for final test. All above
25.24
731
18458.6
... More
Providing and making Khurra 450 x 450 mm with av. min. th. of 50 mm C C 1:2:4 (1cement: 2 coarse sand : 4 graded stone aggregate of size 10 mm & down nominal size ) over P V C sheet 1m x1 m x400 micron, finished wiyh 12 mm th. Cement mortar 1 : 3 ( 1 Cement : 3 Coarse sand ) and a coat of neat cement rounding the rdges and making & finishing the outlet as per specifications all complete
1
33
33.08
... More
Making plinth protection (Apron) 50 mm th. of cement concrete 1: 3 ; 6 (1Cement : 3 Coarse sand : 6 graded Stone agg. 20 mm. nominal size) laid to required slope as required over 75 mm bed of dry brick ballast 40 mm nominal size well rammed including grouting with fine sand, consolidation and finishing the top smooth all complete as per approved specifications.
13.1
318
4170.69
... More
Plain C C floor 40 mm th. with fixing of glass strips in 1: 2 : 4 (1Cement : 2 Coarse sand : 4 graded Stone agg. 12.5 mm. and below) laid in one layer to required slope and finished with a floating coat of neat cement slurry mixed with marble dust in standard ratio 1:5 all complete when floors are polished including supply of extra cement, chapra batti, carborandom stone, all other materials, labour, T & P and machines etc. as required for proper completion of work.
16
380
6080
... More
Providing glass strips 5 mm th. x 35 mm depth with uniform and straight edges as approved by engineer-in-charge.
48
10
480
... More
Providing 6 mm. thick. bearing plaster over walls with Cement mortar 1 : 3 ( 1 Cement : 3 fine sand) finished with a floating coat of neat cement including a thick coat of lime wash all complete as per specifications
3.89
136
530.4
... More
M S or iron work of heavy sizes such as Steel Girders MB300 or as per design, wrought to required form including drilling holes, revetting or welding where necessary and also including supply of steel girder, plates, bolts, nuts, wastage etc.and its hoisting & proper fixing as required for proper completion of work hoisting and fixing Steel girder including making opening as required as per specxifications
1
1
1
... More
supply of girder
184.4
58
10787.4
... More
Labour cost for cartage, fabrication, hoisting, placing and fixing in position
184.4
15
2766
... More
Electrical Work
88175
1
88175
... More
Tube Well
1189200
1
1189200
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil
292.74
130
38191.59
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
35.7
5006
178743.47
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement
content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. Concrete of M25 grade with minimum cement content of 330 kg /cum All works above plinth level upto floor V level
68.04
7358
500661.61
... More
As in item 3above but for slabs
31.05
7358
228476.53
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars
104.49
7926
828300.32
... More
Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
540
619
334388.25
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
1
1
1
... More
All kinds of soil
70
130
9132.38
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in
1
1
1
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
25
6692
167321.83
... More
CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT
1
1
1
... More
12 mm cement plaster finished with a floating coat of neat cement of mix :
1
1
1
... More
1:4 (1 cement: 4 fine sand)
100
312
31277.93
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
1
1
1
... More
RCC (1cement : 1.5 corase sand :3 stone aggregate)
3.5
8456
29597.9
... More
FORM WORK
1
1
1
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
1
1
1
... More
Suspended floors, roofs, landings, balconies and access platform
20
681
13630.57
... More
STEEL REINFORCEMENT
1
1
1
... More
Steel reinforcement for R.C.C. work including straightening, cutting,
bending, placing in position and binding all complete upto plinth level.
1
1
1
... More
Hot rolled deformed bars
180
79
14268.55
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.
1
1
1
... More
All types of soil
1
1
1
... More
300mm dia
60
520
31211.77
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.
1
1
1
... More
150 mm nominal size dia
60
583
34982.33
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
3
1109
3329.11
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
3
1130
3391.84
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge
3
1130
3391.84
... More
Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
2.5
1488
3720.02
... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.
1
1
1
... More
150 mm clamp
2
1484
2968
... More
Providing and fixing Bail plug/ Bottom plug of required dia to the
bottom of pipe assembly of tubewell as per IS:2800 (part I).
1
1
1
... More
150mm dia
1
236
236.67
... More
Providing, fixing in position of ISI marked UV stabilized UPVC pipes for venting , Type-B as per IS : 13592 suitable for rubber ring joints for vertical pipes and solvent cement joints for horizontal pipes, including all neccessary specials and fittings (Make : Finalex/ Astral / Ashirwad)
1
1
1
... More
75 mm dia (Wall Thickness - 3.2 to 3.8 mm)
15
271
4079.25
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and
frame of required shape and approved quality
1
1
1
... More
Rectangular shape 600x450 mm internal dimensions
5
1056
5283.36
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS:10910, on 12 mm dia. Steel bar conforming to IS:1786, having minimum cross section as 23mm x 25 mm and overall minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded leg having 2 mm tread on top surface by ribbing or chequering besides necessary and adequated anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per spaecifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
30
406
12209.09
... More
TOTAL FOR ONE DESILTING TANK & RWH PIT
SIZE: (5X1.75X2.5) & (2X1.75X3.5) m
1
370032
370032.44
... More
COST OF SOLAR PV ROOF TOP PLANT
15
42982
644742
... More
CCTV CAMERA SYSTEM
1950
154
300982.5
... More
IP BASED EBAX SYSTEM
1950
426
831285
... More
LIFT OF 20 PASSENGERS (C.P.W.D.P.A.R. 2023/2.3.1)
1
1899975
1899975
... More
AIR CONDITION HVAC SYSTEM
130
42982
5587764
... More
Supply & Fixing of’ 5mtr long Antique designed pole with cast aluminium/iron base with galvanized steel pipe and decorative top painted with primer then painted with dull finished polyurethane paint fitted with MCB and connector with decorative bracket single arm for mounting of 1nos drop down lantern with body made out of spun aluminium and fitted with poly carbonate diffuser in 110W with built in surge protector and lumn output110lmn/watt. Design as per Architect in charge. (Make - Twinklelite/ wipro/ K Lite/ Luster)
15
50000
750000
... More
Supplying Testing & Installation of Led Flood Light Luminaire 50W Philips Make Model - BVP 140 Led 50 CW PSU WH/ Wipro/ Luster etc all complete of direction of engineer in charge.
20
5000
100000
... More
Supplying Testing & Installation of Led Flood Light Luminaire 100WV Philips Make Model- BVP 142 Led 100 CW PSU WH / Wipro/ Luster etc all complete of direction of engineer in charge.
25
9500
237500
... More
Supplying Testing & Installation of Garden Spike Light 12W WW Make Philips/ Wipro/ Luster etc all complete of direction of engineer in charge.
20
2450
49000
... More
Supply and fixing of decorative 16 Watt LED bollard luminaire with driver set confirming to IP 65 protection complete in all respect.
10
15000
150000
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required
10
11414
114144.63
... More
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
50
42
2103.4
... More
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brassn nut bolt & spring washer spaced at 50mm)
250
801
200441.86
... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.
1
1
1
... More
6.00 Sqmm 4 Core
300
297
89100
... More
25.00 Sqmm 3.5 Core
50
373
18650
... More
70.00 Sqmm 3.5 Core
25
613
15325
... More
Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides.
1
1
1
... More
The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only Incoming
200 Amp. TPN-1 No Outgoing 100 Amp. TPN-1 No and 63 Amp. TPN-3 Nos. Cat. B. Cubicle Type
1
80900
80900
... More
Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.40 A TPN
1
29300
29300
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting,jointing etc. in the existing trench, complete as required.
1
1
1
... More
63 mm dia (OD-63 mm & ID-51 mm nominal)
300
104
31427.3
... More
90 mm dia (OD-90 mm & ID-76 mm nominal)
50
140
7011.34
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%