Military Engineer Services Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date4 Mar 2025
Closing Date25 Apr 2025
Tender Amount₹ 11,07,68,000
Technical
Technical
Financial
Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender is Class "S" and above for MES enlisted contractors. For contractors not enlisted with MES, they should meet the enlistment criteria of "S" Class MES contractor.
Bid Capacity
... View More
The bid capacity required to bid can be determined based on the class of the contractor and the specific requirements for that class. The requirements include: - Minimum solvent or financially sound amounts for each class: - „E‟: Solvent up to Rs 10.00 lakh or financially sound for engagement up to Rs 25.00 lakh - „SS‟: Solvent up to Rs 8.00 crore or financially sound for engagement up to Rs 40.00 crore - 'S': Solvent up to Rs 4.00 crore or financially sound for engagement up to Rs 15.00 crore - „A‟: Solvent up to Rs 2.00 crore or financially sound for engagement up to Rs 7.50 crore - „B‟: Solvent up to Rs 100.00 lakh or financially sound for engagement up to Rs 3.00 crore - „C‟: Solvent up to Rs 40.00 lakh or financially sound for engagement up to Rs 100.00 lakh - „D‟: Solvent up to Rs 20.00 lakh or financially sound for engagement up to Rs 50.00 lakh - Minimum working capital for each class: - „E‟: Rs 5.00 lakh - „SS‟: Not less than Rs 75.00 lakh - 'S': Not less than Rs 50.00 lakh - „A‟: Not less than Rs 30.00 lakh - „B‟: Not less than Rs 12.00 lakh - „C‟: Not less than Rs 10.00 lakh - „D‟: Not less than Rs 7.50 lakh - Past experience of completed works for each class: - „E‟: Three works of Rs 7.50 lakh each or two works of Rs 10.00 lakh each, or one work of Rs 20.00 lakh - „SS‟: Two works of Rs 12.00 crore each or one work of Rs 20 crore - 'S': Two works of Rs 7.50 crore each or one work of Rs 12 crore - „A‟: Two works of Rs 4.00 crore each or one work of Rs 6.00 crore - „B‟: Two works of Rs 1.50 crore each or one work of Rs 2.50 crore - „C‟: Two works of Rs 50.00 lakh each or one work of Rs 80.00 lakh - „D‟: Two works of Rs 25.00 lakh each or one work of Rs 40.00 lakh - Average annual turnover for the last two consecutive years for each class: - „E‟: Rs 25.00 lakh - „SS‟: Rs 20 crore - 'S': Rs 12 crore - „A‟: Rs 6.00 crore - „B‟: Rs 3.00 crore - „C‟: Rs 1.00 crore - „D‟: Rs 50.00 lakh Since specific formulas are not provided, the bid capacity can be determined based on the class of the contractor and the specific requirements for that class.
Technical Capacity
... View More
The required prior work experience for the bidder varies by class. For class 'SS', the bidder should have completed two works costing not less than 12.00 crore each, or one work costing not less than 20 crore. The average annual turnover for the last two consecutive years should not be less than 20 crore. For class 'S', the bidder should have completed two works costing not less than 7.50 crore each, or one work costing not less than 12 crore. The average annual turnover for the last two consecutive years should not be less than 12 crore. For class 'A', the bidder should have completed two works costing not less than 4.00 crore each, or one work costing not less than 6.00 crore. The average annual turnover for the last two consecutive years should not be less than 6.00 crore. For class 'B', the bidder should have completed two works costing not less than 1.50 crore each, or one work costing not less than 2.50 crore. The average annual turnover for the last two consecutive years should not be less than 300.00 lakh (or 3.00 crore). For class 'C', the bidder should have completed two works costing not less than 50.00 lakh each, or one work costing not less than 80.00 lakh. The average annual turnover for the last two consecutive years should not be less than 100.00 lakh. For class 'D', the bidder should have completed two works costing not less than 25.00 lakh each, or one work costing not less than 40.00 lakh. The average annual turnover for the last two consecutive years should not be less than 50.00 lakh. For class 'E', the bidder should have completed three works costing not less than 7.50 lakh, or two works costing not less than 10.00 lakh each, or one work costing not less than 20.00 lakh. The average annual turnover for the last two consecutive years should not be less than 25.00 lakh. No specific percentage of similar works completed is mentioned. However, specific values of works completed are provided, such as 12.00 crore, 20 crore, 7.50 crore, 12 crore, 4.00 crore, 6.00 crore, 1.50 crore, 2.50 crore, 50.00 lakh, 80.00 lakh, 25.00 lakh, 40.00 lakh, 7.50 lakh, 10.00 lakh, and 20.00 lakh. Additionally, an amount equivalent to 5% of the contract sum shall be deposited by the contractor as Performance Security Deposit, and Earnest Money Deposit (EMD) of Rs. 8,79,000.00 is required.
Costs
EMD
₹ 8,79,000Document Cost
₹ 3,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_700122_1Tender No
CELZ/KAN/T-34 OF 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
M&L for Brick work with fly ash brick straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6 complete all as specified and as directed.
60
-
-
... More
M&L for nominal mix type A-0 (1:1.5:3) (using 12.5mm aggregate crushed stone aggregate) as in slabs supported on walls, beams and columns in floors,chajjas, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
12
-
-
... More
M&L for form work edges of concrete flats, treads, breaks in floors, window cills, concrete wall, floor and roofs not exceeding 20 cm wide rough finished surface of concrete complete all as specified and directed.
100
-
-
... More
M&L for formwork to side and soffits of floor and roof beam, beam haunching, girders, bressumers, lintels, cantilevers, shelves including supports, overhang,chajjas etc. also splays between floor and roof beam etc. for flat rough finished surface of concrete complete all as specified and directed.
200
-
-
... More
M&L for Mild steel TMT bars 10mm dia and over, cut to length bent to shape required including crancking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
800
-
-
... More
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed.
80
-
-
... More
Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in Soft / loose soil complete all as specified and directed..
800
-
-
... More
M & L for cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete as specified and directed.
170
-
-
... More
M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in plinth protection surface finished even and smooth without using extra cement of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and directed.
2100
-
-
... More
M & L for 40mm thick PCC 1:2:4 type B-O (using 12.5mm graded crushed stone aggregate) as in floor finishing surface even and smooth with using extra cement complete all as specified and directed.
100
-
-
... More
M & L for glass dividing stripes 3mm thick 38mm width inserted in position and conform to design, complete all as specified and directed.
50
-
-
... More
M & L for chequered coloured cement concrete tiles 30cmx30cmx25mm thick set and jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 15mm thick screed bed in CM(1:6) complete all as specified and directed.
300
-
-
... More
M&L for interlocking precast colored cement concrete glazing finished pavement blocks 60 mm thick M-35 grade with grey cement and pigment con-forming to IS 15658 laid dry hand packed tightly over a lay-er of sand to the true levelled surface concrete tiles pattern shall be as directed complete all a specified & directed. Note:- Supply of sand shall be measured & paid separately under respective item)
1300
-
-
... More
Supply only sand filling under floor or in foundation including watering and in consolidation complete all as speified.
27.5
-
-
... More
M & L for cement concrete 1:2:4 type B-0 (using 12.50 mm graded crushed stone aggregate) as in edging portion of paver block for proper matching with existing surface complete all specified and directed.
20
-
-
... More
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles from site & rubbish off the premises complete all as specified and directed.
6450
-
-
... More
M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in leveling /sub base of flooring complete all as specified and directed.
2500
-
-
... More
M&L for 7 to 8 mm thick Non skid ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc; laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over & including 15mm thick screed bed in CM (1:6) complete all as specified and directed.
260
-
-
... More
M&L for 7 to 8 mm thick joint free ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in floors laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.
5000
-
-
... More
M&L for 7 to 8 mm thick joint free ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in skirting/dado including jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed.
500
-
-
... More
M&L for joint free glazed ceramic coloured tiles of size 350 X 250 / 450 X 300 mm & 6 to 7 mm thick on vertical surface of walls such as in dado, skirting etc; including and jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles, including 10mm thick rendering in CM(1:4) complete all as specified and directed.
3600
-
-
... More
M&L for joint free glazed ceramic coloured tiles of size 1200mmx600mm & 8 to 9 mm thick on vertical surface of walls such as in dado, skirting etc; including and jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles, including 10mm thick rendering in CM(1:4) complete all as specified and directed.
300
-
-
... More
M & L for joint free Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in light shade cement to match with shade of tiles over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.
650
-
-
... More
Description all as per srl item No 26 here in before but as in skirting, dados, laid over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed.
75
-
-
... More
M&L for 18 mm thick black granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of stone including rounding and moulding of edge and making hole for cooking gas pipe complete all as specified and as directed.
300
-
-
... More
M & L for Pre Polished Kota Stone in single piece 15 to18 mm thick on risers of steps laid over and including 10 mm thick cement plaster in CM 1:4, fixed and jointed with grey cement slurry mixed with pigment to match complete all as specified and directed.
150
-
-
... More
M & L for Pre Polished Kota Stone in single piece 18-22mm thick on treads of steps and landing laid over and including 15mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match including rounding, moulding & polishing on exposed edges complete all as specified and directed.
1500
-
-
... More
Taking down cement plaster on wall and ceiling including raking out joint, hacking for key scrubbing down with water etc complete all as specified and directed.
20100
-
-
... More
M&L for 15mm thick rendering of brick wall or concrete surface in CM 1:6 finished even & smooth without using extra cement complete all as specified and directed.
6500
-
-
... More
M&L for 15mm thick rendering on fair faces of brick wall or concrete surface in CM 1:4 finished even & smooth without using extra cement with and including using Water Proofing Compound as per manufacturer instructions complete all as specified and directed.
12500
-
-
... More
M&L for 10 mm thick cement plaster on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.
1100
-
-
... More
M & L for preparation of newly plastered surfaces of ceiling applying 2 coats of oil bound distemper over a coat of primer. The primer and paint will be applied through aireless spray techonology with max working pressure of 3300 PSI by Trucare Graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working,complete all as specified and directed.
3000
-
-
... More
M & L preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
500
-
-
... More
M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.
300
-
-
... More
M & L for Acid/Alkali wash and drying of any existing efflorescence and leaving the wall to dry for min. 3 days to also watch for any extra efflorescence. The surface to be washed with clean water and left to dry for 3 to 4 hours before application of Hydroloc to attain Saturated Surface Dry Condition.
6500
-
-
... More
Supplying and applying , one component penetrative-cum-film forming interior waterproofing solution, with negative hydrostatic resistance upto 4 bar, with forced coverage of 350 ml per Sqm single coat using brush or roller, complete all as specified and directed.
1000
-
-
... More
Supplying and applying, two components acrylic polymer modified cementitious coating on new masonry surfaces devoid of plaster, with Hydrostatic resistance upto 5 bars with forced coverage of 1.75 Kg per Sqm in two coats using roller or brush with a gap of 4 to 6 hrs between the coats. The coats to be applied shall be perpendicular to each other complete all as specified and directed.
Note : The Coverage is to be strictly maintained for film formation.
1000
-
-
... More
M & L for preparation of newly plastered surfaces of walls applying 2 coats of oil bound distemper over coat of wall care putty 1 mm thickness. The paint will be applied through airless spray technology with max working pressure of 3300 PSI by Trucare Graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working, complete all as specified and directed.
300
-
-
... More
M & L for preparation of newly plastered surfaces of walls applying 2 coats of oil bound distemper over a coat of primer. The primer and paint will be applied through airless spray technology with max working pressure of 3300 PSI by Trucare Graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working, complete all as specified and directed
6200
-
-
... More
M & L for preparation of newly plastered surfaces of walls applying two coats of exterior weather proof anti algae 100% acrylic emulsion over a coat of exterior water based primer. The primer and paint will be applied through airless spray technology with max working pressure of 3300 PSI by Trucare Graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working, complete all as specified and directed.
12800
-
-
... More
Complete removal of existing treatment i.e. white wash, colour wash, cement paint etc. on wall and complete, with help of hand operated sander or by manual where it is feasible and preparing the surfaces smooth including applying a coat of wall care putty 1 mm thick with 2 coats of oil bound distemper by Trucare Graco machine / Airless paint sprayer (Vands Engineering solution) / airless sprayer machine surya 9 (Jaguar) / control pro 190 air paint sprayer (wagner) and capable of operational single spray gun with a maximum materials hose length 150m working, complete all as specified and directed.
2000
-
-
... More
Complete removal of existing treatment i.e. white wash, colour wash, cement paint etc. on wall and complete, with help of hand operated sander or by manual where it is feasible and & leveling/ edging the disturbed places/edges using necessary filling of wall care putty preparing the surfaces smooth and applying 2 coats of oil bound distemper over a coat of primer by Trucare Graco machine / Airless paint sprayer (Vands Engineering solution) / airless sprayer machine surya 9 (Jaguar) / control pro 190 air paint sprayer (wagner) and capable of operational single spray gun with a maximum materials hose length 150m working, complete all as specified and directed
6800
-
-
... More
Complete removal of existing treatment i.e. white wash, colour wash, cement paint etc. on ceiling and complete, with help of hand operated sander or by manual where it is feasible and & leveling/ edging the disturbed places/edges using necessary filling of wall care putty preparing the surfaces smooth and applying 2 coats of oil bound distemper over a coat of primer by Trucare Graco machine / Airless paint sprayer (Vands Engineering solution) / airless sprayer machine surya 9 (Jaguar) / control pro 190 air paint sprayer (wagner) and capable of operational single spray gun with a maximum materials hose length 150m working, complete all as specified and directed.
2300
-
-
... More
Taking down existing sunken portion treatment by demolition of old concrete and carry out the sunken treatment as in following steps given below and procedure as per Appendix 'C' of particular specifications :-
210
-
-
... More
S&F of drainage spout GI pipe 40 mm dia bore light grade upto outside of outer wall (Approx 450 mm to 600 mm long).
-
-
-
... More
M&L for PCC 1:1.5:3 type A-0 (using 12.5mm graded crushed stone aggregate), 50 mm thick laid in slope towards drainage out spout pipe mixed with waterproofing chemical as per manufacturer instructions of manufacturer. Khurra 150mmx150mm (min) at appropriate location for free flow (of leaked water if any) towards drainage spouts shall be provided integrally while laying PCC. Fixing of spout shall be done with same PCC as in this item.
-
-
-
... More
M&L for 18 mm thick cement platster in CM 1:3 on vertical faces mixed with water proofing chemical of approved manufacturer as per appendix 'D'.
-
-
-
... More
Item no 47.03 shall be executed while concrete is green as per item no 47.03 above and proper curing and ponding test shall be done before laying drainage/water supply pipes upto the entire satisfaction of Engineer in charge.
-
-
-
... More
Applying two coats of SIKA TOP seal 107 of SIKA or other techno commercially of approved manufacturer as per appendix 'D'.
-
-
-
... More
Drainage and water supply pipe if required & test for leakage/sanitary pipes and shall be laid to slope and a clear gap underneath the pipes shall be made available by providing suitable cement concrete blocks.
-
-
-
... More
M&L PCC 1:5:10 type E-2 using 40 mm graded crushed stone aggregate as reqd depth at site over and including 150mm thick 20mm single sized stone agg to provide a filter media.
-
-
-
... More
M&L PCC 25 mm thick 1:2:4 type B-0 using 12.5 mm grade crushed stone aggregate as level course.
-
-
-
... More
M&L for 7 to 8 mm thick non skid ceramic coloured joint less tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc; laid jointing in neat cement slurry and pointed filled with epoxy chemical of approved manufacturer as per appendix 'D'. .mixed with pigment to match with shade of tiles over and including 15 mm thick screed bed in CM ( 1:6 ) complete all as specified and directed.
-
-
-
... More
Note for item :-
(i) Waterproofing Treatment shall be undertaken alongwith laying of drainage pipes/Sanitary pipes/ Drainage Spout etc (ii) The work shall be carried out as per the direction of Engineer in Charge. (iii) The sunken treatment work shall only be carried out after written approval of Engineer in charge for Leakage/seepage of water/sanitary pipes. (iv) Cost of drainage spout shall deemed to be included in the item however sanitary pipe, water pipe line if required shall be paid separately under respective item.
(v) Laying of Chemical required for varios applications shall be as per manufacturer instructions. (vi) Plan area shall only be measured and paid.
-
-
-
... More
Taking up or down 15 mm dia steel/GI tubing and connection including removal of fittings of any type and material complete and all as specified and directed.
2500
-
-
... More
Taking up or down 20 mm dia steel/GI tubing and connection including removal of fittings of any type and material complete and all as specified and directed.
1700
-
-
... More
Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed.
2300
-
-
... More
Supplying and laying of 16 mm dia CPVC pipes SDR 11 including CPVC SDR 11 fittings like Brass threaded elbow, Brass threaded Tee, FBTA, MBTA etc. on walls/ceiling or laying in floors complete all as specified and directed.
2500
-
-
... More
Supplying and laying of 20 mm dia CPVC pipes SDR 11 including CPVC SDR 11 fittings like Brass threaded elbow, Brass threaded Tee, FBTA, MBTA etc. on walls/ceiling or laying in floors complete all as specified and directed.
1700
-
-
... More
S & F in repair 15mm bore bib tap long body, fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferule and fixed complete all as specified and directed.
405
-
-
... More
S & F in repair 15mm bore angular stop valve chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
540
-
-
... More
S & F repair 15mm bore angle valves, fancy type two way chromium plated with long shank and cup screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
260
-
-
... More
S & F in repair 15 mm bore, brass CP wall mixer (2 in 1) for mixing hot and cold water including provision of overhead shower with 115mm long bend pipe, connected legs and flanges including all other connected accessories screwed down for iron pipe complete all as specified and directed.
120
-
-
... More
S & F in repair Single lever wall mixer, three in one system, with provision of both hand shower and overhead shower complete with 115 mm long bend pipe, connecting legs and wall flange and including maze hand shower 95 x 95 mm square shape single flow (Face plate stainless steel and ABS body in chrome finish) and overhead shower 200x200 mm square shape single flow (ABS body chrome plated with grey face plate) including all necessary arrangements complete all as specified and directed
14
-
-
... More
S&F in repair 15 mm bore, brass CP WHB mixer for mixing hot and cold water screwed down for iron pipe complete all as specified and directed.
134
-
-
... More
S&F in repairs for vitreous china wash basin white flat back size 550x400mm but exclusive taps, wastes pipe, chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand, waste pipe, pedestal & brackets complete all as specified and directed.
134
-
-
... More
S&F for in repair 15mm bore PVC connection 600mm long heavy duty with brass fly nut and warsher for hot and cold water complete and all as specified and directed.
800
-
-
... More
S&F in repair 10 ltrs capacity low level PVC dual flushing cistern, valveless, syphonic type, white,with inlet,ball float and handle including brackets and flush pipe complete and all as specified and directed.
120
-
-
... More
S&F in repair vitreous chinaware Anglo Indian type water closet pan (Semi-Pedestal pattern), white with and including white seat & cover with flat bottom with CP hinging device complete all as specified and directed.
120
-
-
... More
S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440 mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including S&F trap set complete all as specified and directed.
5
-
-
... More
S&F in repair vitreous china wash down water closet pan cascade type white with seat cover and flushing cistern dual action type as per manufacturer instructions with all fittings complete all as specified and directed.
14
-
-
... More
S&F for 15 mm bore sink mixer chromium plated with swinging spout (wall mounted model) with connecting legs and wall flanges complete all as specified and directed.
125
-
-
... More
S&F in repairs Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specifed.
125
-
-
... More
S&F stainless steel plate rack made out of 1mm thick stainless steel of overall size 750x900mm including fixing with brackets/clamps with screws pattern & design as approved by GE complete all as specified and directed.
125
-
-
... More
Dismantling water tanks capacity exc 250 ltrs and n exc 500 ltrs complete all as specified and directed.
125
-
-
... More
S & F HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size complete all as specified and directed.
125
-
-
... More
Dismantling PVC water tanks and remove to store capacity exc 500 Ltrs and n exc 1000 Ltrs complete all as specified and directed.
5
-
-
... More
S & F HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size complete all as specified and directed.
5
-
-
... More
S&F 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod with high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.
130
-
-
... More
Taking down 75/ 110 mm dia rain water pipes, any pattern with all fittings complete all as specified and directed.
300
-
-
... More
Dismantling of 75 to 100 mm dia CI pipes including fittings jointed in cement mortar fixed to wall or laid in trenches and taking out if required cpmplete all as specified.
1500
-
-
... More
S & F PVC (SWR) 75 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
358
-
-
... More
S & F PVC (SWR) 110 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
216
-
-
... More
S&F PVC (SWR) Pipe 75 mm pipes single socketed in any length with rubber ring joints fixed to wall / ceiling including necessary accessories for fixing to wall complete all as specified and directed.
1026
-
-
... More
S&F PVC (SWR) Pipe 110 mm pipes double socketed in any length with rubber ring joints fixed to wall/ceiling including necessary accessories for fixing to wall complete all as specified and directed.
500
-
-
... More
S&F PVC (SWR) bends 75 mm bore complete all as specified and directed.
80
-
-
... More
S&F PVC (SWR) bends 110 mm bore complete all as specified and directed.
218
-
-
... More
S & F PVC (SWR) junction single, (Single T) 75 mm dia equal or unequal complete all as specified and directed.
255
-
-
... More
S & F PVC (SWR) junction single, (Single T) 100 mm dia equal or unequal complete all as specified and directed.
145
-
-
... More
S & F PVC (SWR) coupler 75 mm dia complete all as specified and directed.
50
-
-
... More
S & F PVC (SWR) coupler 100 mm dia complete all as specified and directed.
25
-
-
... More
S & F PVC (SWR) vent cowl 75 mm dia complete all as specified and directed.
100
-
-
... More
S & F PVC (SWR) vent cowl 100 mm dia complete all as specified and directed.
75
-
-
... More
S & F PVC (SWR) floor trap 75mm dia of outlet, plain with grating including jointing with solvent cement complete all as specified and directed.
500
-
-
... More
S & F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.
100
-
-
... More
Cutting holes through brick walls built, in cement mortar and making good in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required, superficial area exc 400 sqcm but n’exc. 0.10 sqm, complete all as specified and directed.
5000
-
-
... More
S&F Soap dish, chromium plated incl fixing with connected accessories complete all as specified and directed.
134
-
-
... More
S&F in repair Corner glass shelf with frame set of three, chromium plated complete all as specified and directed.
134
-
-
... More
S&F in repair, Toilet paper holder, chromium plated complete all as specified and directed.
14
-
-
... More
S&F wall mounted towel rack chromium plated 600 mm including fixing with connected accessories complete all as specified and directed.
134
-
-
... More
S & F in repair Door type PVC bathroom cabinet with Mirror etc complete all as specified and directed.
120
-
-
... More
S&F in looking Mirror 6.00mm thick in decorated frame , screwing with high quality stainless steel glass fixer / holder sleeves at corners complete all as specified and directed.
20
-
-
... More
S&F in repair Towel ring chromium plated dia not less than 15 cm with mounting brackets complete all as specified and directed.
134
-
-
... More
S&F 15 mm dia & 1m long flexible SS braided cord health faucet including chromium plated wall hook fixed to wall complete all as specified and directed.
134
-
-
... More
Taking down chowkhat or frames with shutter (without taking of shutters from the frame) area not exceeding 1.5 sqm complete with hold fast etcincluding making good dismantled portion by brickwork, concrete (1:2:4 type B-0) or plastering in CM 1:3 complete all as specified and as directed.
1200
-
-
... More
Taking down chowkhat or frames with shutter (without taking of shutters from the frame) area exceeding 1.5 sqm not exceeding 4 sqm complete with hold fast etc including making good dismantled portion by brick work, cement concrete (1:2:4 type B-0) or plastering in CM 1:3 each complete all as specified and as directed.
850
-
-
... More
S & F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing complete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fixing hinges and hold doors properly for a long life)
1160
-
-
... More
S & F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face as per specification & drawing, complete as specified and directed.
315
-
-
... More
S&F of 100 mm size Aluminium butt hinges extruded aluminium aloy galvanised mild steel hinge pin, anodised and fixed with, type B21 complete all as specified and directed.
825
-
-
... More
S & F Aluminium 125 mm, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.
550
-
-
... More
S & F 125 mm long Extruded aluminium handles, fabricated type., anodised complete all as specified and directed.
550
-
-
... More
S & F Pressed steel frames of size 125mm x 60 mm for doors with one or more rebates including filling of cement concrete / mortar, fixing lugs, required no of MS hinges, lock strike plate and all other connected accessories etc., complete all as specified and directed.
2400
-
-
... More
S & F Pressed steel frames of size 165mm x 60 mm for doors with one or more rebates including filling of cement concrete / mortar, fixing lugs, required no of MS hinges, lock strike plate and all other connected accessories etc., complete all as specified and directed.
1400
-
-
... More
S & F 35mm thick second class hardwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
1300
-
-
... More
S&F 35mm thick factory made glazed and Skelton shutters 2nd class HW rails and stiles planed framed and open rebated and prepared to receive glass, gauze etc (without sash bars) with cut and mitered beads for securing glass etc size of members of shutters as specified in SSR part I, section 8 clause 8.24 (a) supplied and fitted to chawkhats complete all as specified and directed.
680
-
-
... More
S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of decorative type/wood grain printed colour of size 50 X 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.
Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
175
-
-
... More
Description all as per item No. 109 above, but size 50 x 125 mm complete all as specified and directed.
125
-
-
... More
Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type/wood grain printed colour flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and including S & F with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.
110
-
-
... More
S & F Factory made wire gauged PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded decorative type/wood grain printed colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; wire gauzed i.e. panel will be of wire gauze in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly of wood grain printed colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed.
50
-
-
... More
S & F 200mm stainless steel fancy handle of approved make fixed with SS screws etc. complete all as specified and directed.
2450
-
-
... More
S & F 200 mm stainless steel barral tower bolt of extruded section complete all as specified and directed.
2450
-
-
... More
S & F 300 mm long aluminum anodized sliding door bolt with hasp and staple and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed complete all as specified and directed.
800
-
-
... More
S & F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
400
-
-
... More
S & F 75mm long stainless steel door stopper of double legged with rubber shoes in bottom complete all as specified and directed.
780
-
-
... More
S&F 3 track window frame(124mmx50mm) shutter of uPVC solid foam profile window sill element FP 12419 (124mmx19mm thick) and 3 track sliding element FP 7132(71mmx32mm) grooved sill element. Sliding shutter are made of vertical and horizontal stile element FP7128(71mm W x 28m thick) having GI 'C' section (39mmx19mmx19mmx0.60mm thick stiffener and telescopic 'L' corner, Infill panel is clear to translucent PC sheet Or 5 mm thick glass is fixed in the shutter using beading element 12 mm W x 10mm thick by SS headless nails including SS wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with S.S staple pins window frame is strengthen by GI clamps (120x120x75mm) at all four corners. External /internal cover moulding/architrave is provided to cover gap between masonary wall and frame due to plumbing error in masonary work and elegant look all complete as specified and directed.
80
-
-
... More
S & F framed work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
20000
-
-
... More
S & F MS 125mm Butt hinges, heavy weight, cold rolled mild steel complete all as specified and directed.
350
-
-
... More
S&F powder coated factory made aluminium window and ventilator (glazed/ gauzed) shutters with frame as per Drg. no. LZ/C-TD/144 dt. 30 May 2017, side hung type without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, powder coated aluminium fittings such as peg stays hinges, tower bolt, suitable handle complete all as specified and directed.
Note:- No extra payment will be made for glass, gauze and fittings)
1200
-
-
... More
S&F stainless steel curtain rods of 25mm dia as in doors/ windows pelmets.SS brackets fancy type ,including screws and other necessary fitting(knob) for fixing brackets SS Funnels for 25 mm dia dropry rods, fixed at each end of rods complete all as specified and directed.
3200
-
-
... More
Dismantling of boarding, any descripsion, fixed in any position with nails complete all as specified and directed.
800
-
-
... More
S & F PVC board of thickness 18mm with decorative choice lamination on one side and plain colour on other, having minimum density of 600 gm/cm3, lead free, anti-bacterial & anti-fungal, termite & borer proof & water proof including cutting, screwing as in kitchen cabinet, almirah shutter also matching the sawn edges using same colour PVC edge band tape complete all as specified and directed.
1950
-
-
... More
M & L 100mm size stainless steel hinges auto close type of approved make including fixing with necessary accessories like screws etc complete all as specified. complete all as specified and directed.
1800
-
-
... More
M & L 150mm size stainless steel handles flush type complete all as specified and directed.
1450
-
-
... More
S&F of continuous piano hinges brass bright finish or electro galvanished width of flaps when open in 30 mm complete all as specified and directed.
50
-
-
... More
S&F 100 mm long hasp and staple, safety type, brass with mild steel hinge pin inculding bolt to hinge plate and fixed and screws complete all as specified and directed.
500
-
-
... More
S&F Magnetic catcher heavy duty of approved quality in cupboard / wardrobes including fixing with necessary screws complete all as specified and directed.
1800
-
-
... More
S&F 40mm dia, brass polished cupboards knobs fixed with nut, screw and washer of mild steel,bright finished complete all as specified and directed.
60
-
-
... More
S & F SS roller plate with rollers suitable for sliding cubboard drawer complete all as specified and directed.
100
-
-
... More
S&F for Stainless steel tray, bucket and baskets of suitable shape and size for modular kitchen, fixing as per manufacturer's instructions complete all as specified and directed..
150
-
-
... More
Dismantling of terracing tiles/brick tiles single layer on roof,laid bedded and pointed in any mortar complete all as specified and directed by the Engineer-in-charge.
510
-
-
... More
Demolition by using hand held electric drills, cutting machine, chisels etc (direct use of hammers on RCC roof for demolition is strcitly prohibited) of roof treatment including padding concrete of any description including mud in roof any thickness with and including roughening old concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed by the Engineer-in-charge.
5100
-
-
... More
M&L for cement concrete type B-0 (1:2:4 ) (using 12.5 mm graded crushed stone aggregate) as in padding and coping,incl hunching, benching etc complete all as specified and directed.
255
-
-
... More
M&L for 10 mm thick in CM(1:3) rendering on fair faces concrete surfaces/roof top mixed with liquid water proofing compound finished even & smooth without using extra cement complete all as specified and directed. Note : Liquid WPC shall be measured and paid separately.
5100
-
-
... More
Supply only liquid water proofing compound complete all as specified and directed.
900
-
-
... More
M & L roof kerb of cement concrete 1:2:4 type B-0 (using 12.50 mm graded crushed stone aggregate) mixed with and including SBR ploymer as manufacturer's instructions all around periphery of the wall complete all specified and directed.
12
-
-
... More
M & L preparation of newly plastered sufaces of roof including cleaning the surfaces by using wire brush / pressure hose and applying high performance polyurethene liquid membrane waterproofing coating cold applied in two coats @ 1.5Kg /Sqm/ 2 coats spray/ brush applied, with an elongation of 300% to 700% and tensile strength of not less than 3 N/Sqmm as per ASTM D412 and ASTM D2370, crack bridging abiltity of 3.5mm as per ASTM C1305, shore a hardness of not less than 60 as per ASTM D2240. The item includes applying epoxy primer @ 0.15Kg/Sqm and a geotextile of 40 GSM to be applied over first coat while first coat is still wet,complete as per manufacturer's instructions complete all as specified and directed. Note:-
(a) The contractor shall submit a gurantee of 10 years from the date of completion of work for waterproofing treatment alongwith manufacturer's gurantee. The amount of Rs. 40 (Forty ) per Sqm and min of Rs. 4000/- for waterproofing treatment shall be withheld from contractor's final bill till the expiry of gurantee period. The contractor at his own option may furnish fix deposit receipt pledged in favour of GE(I) Kanpur against guarantee money. (b) The water proofing shall be carried out by authorised applicator of manufacturer only. The name of applicator shall be got approved from GE before commencement of work.
5000
-
-
... More
M&L for grouting using polymer modified waterproof grout. The detail procedure of inject grouting is as under:- (a) Drilling of 12mm dia holes upto 40mm depth and provide PVC nozzles/ entry ports over grid @ 1m c/c or less depending upon situation.
(b) Before injecting the grout compressed air to be blown to remove all distance and dirt.
(c) Grouting at pressure of 5kg/sqcm to be don till refusal/ rejection or appearance of grout from adjacent nozzle.
(d) Observe the cracks and make V groove along.
(e) Nozzles and V groove shall be filled with polymer based mortar.
5200
-
-
... More
Removing of demolished material to a distance of exc 100m and n exc 200m or under, beyond the lead included in the rates, including loading, unloading complete all as specified and directed
950
-
-
... More
Dismantiling of concrete by chiselling from RCC members like col, beam, parapet, facia, ceiling etc exposing the reinforcement without disturbing the reinforcement and get free from rust by sand blasting providing at places addl reinforcement welding with existing reiforcement as directed wherever required binding with welded mesh 100 mmx100mm (12 gauge welded mesh) & tack welding and primed with using Araldite epoxy resins ( manufactured by M/s Ciba Geigy Ltd/ FAIR BOND EP/Sika or other approved manufacture) & provision of guniting pressure 2 to 3 Kg/Sqm with admixer 1 cement 3 sand mixed Dr fixit Pidicrete SC plasticiser (2 to 10% by weight of cement) of thickness 40mm average including stripping, floating with wooden strippers for proper dimension control inclusing necessary form work & scaffolding up to Three storey complete and surface of guniting to be finished fair and even with and including 10 mm thick plaster in cement mortar 1:4 with water proffing compound @3% by weight of cement, cleaning & removing of waste material etc as directed at site including necessary painting,white wash, distemper/ exterior acrylic emulsion).All surrounding wall, joineries and fitting should be covered with polythene sheet by contractor while work. (Any wall, floor,fittings and roof damaged by the contractor shall be repaired/change by contractor under same item and no extra payment will be paid to contractoron this account complete all as specified and directed. Note: Welded mesh & addl reinforcement if required measured and paid separetly.
3000
-
-
... More
M & L for Mild steel TMT bar 6 mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally, binding wire (0.9mm dia annealed ) complete all as specified and directed.
2000
-
-
... More
M&L for Welded steel wire fabric weight n exc 4 Kg/sqm complete all as specified and directed.
3000
-
-
... More
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets as specified and directed.
570
-
-
... More
Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595mm of approved texture with Semi perforated 12mm thick micro tegular edged GRG false ceiling tiles, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm, cross-T of size 15 x 32 mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing, complete all as specified and directed.
570
-
-
... More
Dismantling of unframed work timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed.
2.5
-
-
... More
M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 W (Gde-E-250) quality A complete all as specified and as directed.
8000
-
-
... More
Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed.
1000
-
-
... More
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
200
-
-
... More
S & F of Pre- painted galvalume aluminum zinc coating GI based profile sheet TCT with gsm -150 sheet 0.50mm thick of any colour total mass coating 150gms/sqm (both side) and having tensile strength of 550 Mpa as in roof covering/cladding to wall/window chajja, fixed with self tapping screws complete all as specified and directed.
1200
-
-
... More
S & F Pre- painted galvalume aluminum zinc coating GI based plain steel TCT with gsm -150 sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
50
-
-
... More
S&F wind ties for roof including securing bolts as directed, including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.
300
-
-
... More
M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide n.exc 10cm width or girth complete all as specified and as directed.
20
-
-
... More
M & L for preparation of new steel or iron surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat zink chrome red oxide primer complete all as specified and directed.
1600
-
-
... More
M&L Painting to new wood and wood based surface of any description over 10cm width or girth including two coat of synthetic enamel paint over a coat of pink primer including preparation of newly or previously untreated surface complete all as specified and directed.
1800
-
-
... More
Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
3
-
-
... More
Supply and fixing Stainless Steel (304 Grade) signage plate of 18 gauge of required shape & size and engraving specific letters or figures any size & nos of computerized graphics duly filled with required colors including buffing, polishing the SS plate, necessary screws, nut and bolt etc. fixing the plate on wall as per the direction of Engineer- in - charge complete all as specified and directed.
10
-
-
... More
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
600
-
-
... More
INTERNAL ELECTRIC SUPPLY Taking down old copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, etc.removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls floors etc complete all as specified and directed
4438
-
-
... More
M&L for point wiring complete for One light/Fan/Exhaust Fan/Bell point controlled by one switch with PVC insulated and unsheathed FRLSH cable 1.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 20 mm dia PVC conduit medium grade concealed in wall and heavy duty PVC conduit not less than 20 mm in roof / floor slab and ceiling, pressed GI concealed terminal boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of required colour complete, including 1.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed.
Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost
2594
-
-
... More
Description all as per srl item No-161 here in above but upto ceiling height and on surface at ceiling complete all as specified and directed.
423
-
-
... More
Description all as per srl item No-161 here in above but for one 3 pin 15 Amps socket outlet independent board with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and incl conduitcomplete all as specified and directed.
415
-
-
... More
Description all as per srl item No-161 here in above but for one 3 pin 5A socket outlet independent controlled by one switch complete all as specified and directed.
586
-
-
... More
Description all as per srl item No-161 here in above but for one 5A socket outlet on the same board controlled by one switch complete all as specified and directed.
260
-
-
... More
Description all as per srl item No-161 here in above but for one light point controlled by 2 nos two way switches complete all as specified and directed.
160
-
-
... More
M&L for switch modular type single pole one way 1 module 6 amps 240 volts complete all as specified and directed.
3863
-
-
... More
M&L for switch modular type one way 1 module 16 amps 240 volts complete all as specified and directed.
415
-
-
... More
M&L for socket 6 amps modular type 2/3 pin combined 2 module, 230 volts complete all as specified and directed.
846
-
-
... More
M&L for socket modular type, 2/3 pin, 6 and 16 amps combined 2 module, 230 volts complete all as specified and directed.
415
-
-
... More
M&L for bell push modular type 1 module one way 6 amps 240 volts complete all as specified and directed.
125
-
-
... More
M&L for switch modular type two way 1 module 6 amps 240 volts complete all as specified and directed.
320
-
-
... More
S&F in replacement fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100 % and connecting electrically complete all as specified and directed.
423
-
-
... More
M&L for bell electric heavy duty Ding Dong type 230 volts single pole complete all as specified and directed.
125
-
-
... More
M&L for ceiling rose surface bakelite 3 terminals complete all as specified and directed.
2219
-
-
... More
S & F Lamp holder insulated body with back plate for dome batten fittings complete all as specified and directed.
375
-
-
... More
Taking down old/Unserviveable concealed/surface copper/aluminium submaun wiring complete all as specified and directed.
3800
-
-
... More
M&L for Submain wiring with two single core 4 sqmm cop-per conductor, FRLS-H insulat-ed, multistranded, unsheathed cable ISI marked drawn in con-duit concealed in wall surface / ceiling for sub main connec-tion including one run of 4 sqmm FRLS-H insulated mul-tistranded unsheathed copper conductor used as earth wire to common earth and connection to earth dolly complete all as specified.
Note:- Two single core 4 sqmm copper conductor, one run PVC conduit and one run of 4 sqmm earth wire shall be considered & measured as one unit.
2550
-
-
... More
M&L for Submain wiring with two single core 6 sqmm copper con-ductor, FRLS-H insulated, multistranded, unsheathed cable ISI marked drawn in con-duit concealed in wall surface / ceiling for sub main connec-tion including one run of 6 sqmm FRLS-H insulated mul-tistranded unsheathed copper conductor used as earth wire to common earth and connection to earth dolly complete all as specified. Note:- Two single core 6 sqmm copper conductor, one run PVC conduit and one run of 6 sqmm earth wire shall be considered & measured as one unit.
1250
-
-
... More
S&F LED batten Tube Light surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption 20W (4 feet 20 W) luminaire lumen 2000 lm, system efficiency of 120 lumens /W, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20, colour rendering index CRI80, temp range 0 to 450C, driver efficiency85%, power factor0.9, THD 20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level 60V DC as per IEC standard with LM70 & LM80 certification. complete all as specified and directed.
1919
-
-
... More
S&F in replacement of LED bulk head fitting with opal diffuser 10 Watt, 6500 K, IP-65, with efficient heat dissipation and integrated electronic driver complete connecting electrically complete all as specified and directed.
140
-
-
... More
S&F in replacement of LED mirror light 10/11 watt, 1 feet long with efficient heat dissipation and integrated electronic driver complete connecting electrically complete all as specified and directed.
130
-
-
... More
Supply and fixing in replacement of High power LED wall security light 25 Watt IP 66 Energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaire with high power LEDs as light source and electronic driver incl suitable size service bracket fixed with clamps, nut, bolt and washer and electric connection with 1.5 Sqmm multistranded twin core alum cable PVC insulated complete all as specified and directed.
50
-
-
... More
S & F VTPN distribution board iron clad, double door with IP-43 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link, confirming to complete with one MCCB 3 pole 415 Volts 125 Amps, 4 pole rating with rupturing cap 26 KA of the same make as of distribution board & with MCBs of required size making connection with thimbles & including cutting chases to wall for fixing DB and making good the disturbed wall surface complete all as specified and directed.
33
-
-
... More
Supply and fixing sheet metal enclosure MCB distribution board, double door with IP-43 IK-09 protection with metal door single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.
130
-
-
... More
Supply and fixing sheet metal enclosure MCB distribution board, double door with IP-43 IK-09 protection with metal door single phase 240 volts 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.
10
-
-
... More
M&L for MCB single pole 240 volts 5 to 32 amps, with rupturing capacity 10 KA using thimbles of required size complete all as specified and directed.
800
-
-
... More
M&L for MCB single pole & neutral 240 volts 40 to 63 amps,with rupturing capacity 10 KA using thimbles of required size complete all as specified and directed.
140
-
-
... More
M&L for single pole and neutral enclousere with a top pin, earth plug and socket complete with one SPN MCB 25 Amps, 240 Volts.complete all as specified and directed.
265
-
-
... More
Disconnecting & taking down any type of geyser and deposit to MES Store & Supply and fixing electric water heater, stoarge type made of ultra thick super cold rolled steel plates, feroglass dry powder coat-ing technology inner tank and heating element heavy duty mag-nesium anode rod with steel core to protect enamelled tank from rust and corrosion 2 KW Capacity, 230 Volt, 1 Phase AC, 50 Hz, 25 Ltrs, BEE 5 Star, Energy saving high density PUF insulation, glass coated heating performance and resistance to oxidation and carbonation at high tempratures rated complete with all accessories such as safety valve, thermostat, NRV, connection piece and writing MES no. in black synthetic enemael paint/engraving tool etc complete all as specified & directed.
130
-
-
... More
Disconnecting & taking down exhaust fan and deposit to MES Store & Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers shutter complete including providing/cutting the round hole of required size in wall, grouting of nuts, bolts, fixing the frame and exhaust fan including fixing of louver shutter with frame on the exhaust side (outer surface of wall) and cutting with and including PVC insulated three core 23/0.0076 copper cable and suitable size of flexible conduit from celling rose to exhaust fan motor and writing MES No. in black synthetic enamel paint/engraving tools etc complete all as specified and directed.
120
-
-
... More
Supply and fixing Exhaust Fan high quality engineering plastic, resistant to colour change with anti- statio properties (ventil air) 250 mm sweep 35 watt ,1200 RPM with approved colour and with louver shutter complete including providing/cutting the round hole of required size in wall, grouting of nuts, bolts, fixing the frame and exhaust fan including fixing of louver shutter with frame on the exhaust side (outer surface of wall) and cutting with and including PVC insulated three core 23/0.0076 copper cable and suitable size of flexible conduit from celling rose to exhaust fan motor and writing MES No. in black synthetic enamel paint/engraving tools etc complete all as specified and directed.
130
-
-
... More
Disconnecting & taking down upto 1400 mm sweep ceiling fan and deposit to MES Store. & Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.00, Air delivery minimum 210 CMM, 350 RPM (tolerance as per IS : 3742019), THD less than 10%, with remote unit for speed control and all remaining accessories including safety pin, nut bolts, washers, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete all as specified. Note :-
(a) Make, Model & Colour of fan as approved by GE. (b) Writing MES No. in black synthetic enamel paint by the contractor.
(c) T & P will be provided by the contractor for reaching any height of the ceiling.
428
-
-
... More
M&L in replacement of earthing complete with galvanized earth plate electrode 600 x 600 x 6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level) with top edge of the plate not less than 1.50 M below normal ground level , con-nected to and including galvanized steel wire 4mm dia as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 15mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed.
NOTE:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor complete all as specified and directed.
66
-
-
... More
Supply and fixing wall mounting fan 400mm sweep 50 watt,1360 RPM with approved/white colour air delivery 65 m3 /min single phase 220volt 50Hz with contrl pull cord for fan on/off and oscillation on/off complete mounting accessories,b;ade ,guard set,guard ring and including PVC insulated three core 23/0.0076 copper cable and suitable size of flexible conduit from celling rose to fan motor and writing MES No. in black synthetic enamel paint/engraving tools etc complete all as specified and directed
5
-
-
... More
Supply and fixing electric chimney wall mount ,noiselevel 58db,auto clean,motion sensor control,operation mode exhaust type ,size of chimney 600x500x140,push button control type,3stage speed setting single phase 220volts,150watt 1200 m3 /hr with energy saving LED lamp with baffle filter with all accessories required to install the electric chimney and writing MES No. in black synthetic enamel paint/engraving tools etc complete all as specified and directed.
5
-
-
... More
Disconnecting & taking down any type of Electric Meter and deposit to MES Store complete all as specified and directed.
125
-
-
... More
EXTERNAL ELECTRIC SUPPLY
Excavation in trenches in any type of soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out all as required for laying of cables, foundation filling of poles or stays and for rerouting of cables complete all as specified and directed.
221.94
-
-
... More
Returning filling in with approved excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.
202.44
-
-
... More
Removing excavated material (soils) to a distance n.exc 50 m and depositing where directed at a level not exc 1.50 m above the starting point complete all as speci-fied and directed.
19.5
-
-
... More
Sand cushioning to U/G cable in layers of 23 cm thick (8 cm before laying the cable and 15 cm thick after laying the cable, punned thickness shall be measured) in trenches complete all as specified and directed. Note: - Only punned thickness shall be measured and paid.
65.04
-
-
... More
M&L for Sub class ‘B’ bricks old size. laid dry flat over the cable abutting each other, length of cable equal to width of brick complete all as specified and directed.
6.4
-
-
... More
Supply, installing, testing and commissioning of out door type, floor mounted step down transformer, 11 KV/433 Volts (at no load) AC 3 phase 50 Hz, 200 KVA capacity, core type, double copper wound, oil immersed, naturally cooled, Oil Natural-Air Natural (ON AN), with external cooling tubes, delta connected on primary side (HV) and star connected on secondary side (LV) in accordance with vector group DYN-11( vector group 4) with Neutral brought out on secondary side (LV side) and having tapings at + 7.5% in equal steps of 2.5% on HV side to be changed by means of hand/manually operated off load tap changer gear. The voltage regulation shall be as per IS including first fill of transformer oil as per IS -335 and including all fittings accessories as specified in SSR Part-I. The limit of temperature rise after continuous full load run as specified in IS-2026 shall be suitably adjusted to suite the maximum ambient temperature of 55 degree centigrade as prevalent at Kanpur. The transformer shall be comprise of the following fittings and accessories:-
1
-
-
... More
Oil conservator tank with fillings holes and cap filter type drain valve and oil level gauge.
-
-
-
... More
Silica gel breather with connecting pipe, first fill of dehydrating agent
-
-
-
... More
Explosion relief mounted on tank with double diaphragm and equalizer pipe connected to conservator air tank (pressure release valve)
-
-
-
... More
Air release valve plug
-
-
-
... More
One cable box on LV side (Secondary side) consisting of four nos porcelain bushing with copper rods, complete with nuts and washers, with 01 cable glands suitable for reception of taking out suitable size cable, including gland joints complete all as specified .
-
-
-
... More
Explosive vent
-
-
-
... More
01 no 100 mm dia, dial type thermometer, vapour pressure type, having range 0-120 degree Celsius with maximum temperature indicator and resetting device including max reading pointer washer etc.
-
-
-
... More
Thermometer pocket on tank cover
-
-
-
... More
4 Nos plain solid CI detachable rollers
-
-
-
... More
2 Nos Earthing terminals marking plate.
-
-
-
... More
Rating plate and terminal marking plate
-
-
-
... More
Extra bushing for neutral outside the cable box brought out on LV side
-
-
-
... More
First filling of oil confirming to IS and tested upto 60 KV dielectric strength
-
-
-
... More
Lifting lugs
-
-
-
... More
Oil drain valve with plug
-
-
-
... More
One cable box on HV side (primary side) consisting of 01 cable gland suitable for reception of taking in HT cable including gland joints complete all as specified.
-
-
-
... More
Hand hole of sufficient size to assess interior of tank
-
-
-
... More
Dehydrating breather with first fill of dehydrating agent
-
-
-
... More
Two earthing terminal on tank body to facilitate fixing of 32x6mm GI strip
-
-
-
... More
Rating plate with terminal marking plate
-
-
-
... More
Inspection cover
-
-
-
... More
Extra bushing for neutral out side the LV side
-
-
-
... More
Note :- Anything missed above but is required for efficient functioning of transformer is deemed to be included in the quoted rate.
-
-
-
... More
Supply & installation of 11 KV outdoor type extensible 03 way load Break switch floor mounted with internal copper busbar, consisting of incoming 630 AMP fixed manual Load Break Switch and 02 no outgoing fixed manual load break switch. All live parts, bus bars, LBS connections of RMU should be enclosed in 1 tank (min 3 modules) to avoid multiple interconnection and sealed for life robotically welded non magnetic and non ferried stainless steel of not less than 2 mm thick having IP 67 degree of protection fitted with gas as insulation with leakage rate less than 0.1%/Year tested as per IEC 62271-200. RMU should complete with all accessories such terminal boot, VPIS cable support, all front cable termination, mechanical indication for load break switch ON /OFF, mano meter as per with IEC standed 62271-200, 60056, 60129, 60265, 60298, 60420, 60529 and 60694, Altitude of installation upto 100 mtr as per IEC 60120. Bushing bolted type top mounted outside the tank for connection for external busbars including PCC platform of suitable size as per manufacturers recommendations/drawings :-
1
-
-
... More
One incoming and two outgoing load break switch consist of following accessories:-
-
-
-
... More
630 A Load break switch module for making and breaking of fault current alongwith Earth switch of full making capacity.
-
-
-
... More
Short time current-20KA/3Sec
-
-
-
... More
Making capacity-50 KA
-
-
-
... More
Auxiliary Contacts-1 No_ 1NC
-
-
-
... More
Power frequency withstand voltage-28 KV
-
-
-
... More
Impulse withstand voltage-75 KV
-
-
-
... More
Nominal operating gas pressure-1.3 Bar abs.
-
-
-
... More
Front covers mechanism –IP2X
-
-
-
... More
Cable cover-3X
-
-
-
... More
Internal arc type tested for 20kA for 1 sec
-
-
-
... More
Snap action mechanism for manual operation
-
-
-
... More
Cable box for front termination of the cable suitable upto 3 core 300 sqmm, 11 KV XLPE cable
-
-
-
... More
Right angle boots (push on type)
-
-
-
... More
Suitable Cable bushing for front only cable terminations
-
-
-
... More
Arc proof cable covers with self interlocking mechanism with earth switch.
-
-
-
... More
Disconnecting electrically and taking out old unserviceable HT U/G cables any type of size 95 sqmm 3 core complete all as specified and directed.
50
-
-
... More
Supply, laying, testing and commissioning of XLPE insulated screened PVC sheathed galvanized steel strip or wire armoured electric power cable with aluminium conductor of cross sectional area 95 sqmm 3 core, 11 KV rated suitable for earthing system passing through pipe, in duct, on poles, in trenches including fixing hardware, clamps, making good the damaged surfaces etc, as required complete all as specified and directed.
Note:- Excavation and earth work, sand cushioning , brick covers and GI pipes etc. shall be measured and paid separately under respective items of BOQ.
50
-
-
... More
Disconnecting electrically and taking out old unserviceable LT U/G cables any type of size 35 to 240 sqmm 3.5 core complete all as specified and directed.
890
-
-
... More
Supply, laying, testing and commissioning of XLPE PVC insulated of cross sectional area 240 sqmm 3.5 core, PVC sheathed armoured LT 1100 volts heavy duty with aluminum conductor passing through pipe, in duct, on poles, in trenches including fixing hardware, clamps, making good the damaged surfaces etc, as required complete all as specified and directed.
60
-
-
... More
Supply, laying, testing and commissioning of XLPE PVC insulated of cross sectional area 185 sqmm 3.5 core, PVC sheathed armoured LT 1100 volts heavy duty with aluminum conductor passing through pipe, in duct, on poles, in trenches including fixing hardware, clamps, making good the damaged surfaces etc, as required complete all as specified and directed
350
-
-
... More
Supply, laying, testing and commissioning of XLPE PVC insulated of cross sectional area 150 sqmm 3.5 core, PVC sheathed armoured LT 1100 volts heavy duty with aluminum conductor passing through pipe, in duct, on poles, in trenches including fixing hardware, clamps, making good the damaged surfaces etc, as required complete all as specified and directed.
120
-
-
... More
Supply, laying, testing and commissioning of XLPE PVC insulated of cross sectional area 95 sqmm 3.5 core, PVC sheathed armoured LT 1100 volts heavy duty with aluminum conductor passing through pipe, in duct, on poles, in trenches including fixing hardware, clamps, making good the damaged surfaces etc, as required complete all as specified and directed.
100
-
-
... More
Supply, laying, testing and commissioning of XLPE PVC insulated of cross sectional area 50 sqmm 3.5 core, PVC sheathed armoured LT 1100 volts heavy duty with aluminum conductor passing through pipe, in duct, on poles, in trenches including fixing hardware, clamps, making good the damaged surfaces etc, as required complete all as specified and directed.
60
-
-
... More
Supply, laying, testing and commissioning of XLPE PVC insulated of cross sectional area 35 sqmm 3.5 core, PVC sheathed armoured LT 1100 volts heavy duty with aluminum conductor passing through pipe, in duct, on poles, in trenches including fixing hardware, clamps, making good the damaged surfaces etc, as required complete all as specified and directed.
200
-
-
... More
Supply and fixing cable end jointing kit for 11 KV (Earthed) grade cable for indoor termination, heat shrink type joint complete jointing materials and accessories suitable for 3 core XLPE, armoured, auminium conductor cable of size 50 sqmm to 95 sqmm complete all as specified and directed.
1
-
-
... More
Supply and fixing cable end jointing kit for 11 KV (Earthed) grade cable for outdoor termination, heat shrink type joint complete jointing materials and accessories suitable for 3 core XLPE, armoured, auminium conductor cable of size 50 sqmm to 95 sqmm complete all as specified and directed.
1
-
-
... More
Supply and fixing in replacement cable end jointing kit for 1100 Volts grade cable for outdoor/indoor termination end joint heat shrink type joint complete jointing materials and accessories suitable for XLPE/PVC, armoured, auminium conductor cable of size 35 sqmm to 50 sqmm 3.5/4 Core complete all as specified and directed.
4
-
-
... More
Supply and fixing in replacement cable end jointing kit for 1100 Volts grade cable for outdoor/indoor termination end joint heat shrink type joint complete jointing materials and accessories suitable for XLPE/PVC, armoured, auminium conductor cable of size 70 sqmm to 150 sqmm 3.5/4 Core complete all as specified and directed.
6
-
-
... More
Supply and fixing in replacement cable end jointing kit for 1100 Volts grade cable for outdoor/indoor termination end joint heat shrink type joint complete jointing materials and accessories suitable for XLPE/PVC, armoured, auminium conductor cable of size 185 sqmm to 300 sqmm 3.5/4 Core complete all as specified and directed.
4
-
-
... More
Supply, installing, testing and commissioning outdoor type LT feeder piller box double door type (Safety Centre) of suitable size, padestal mounted, CPRI approved factory made totally enclosed, dust and vermin proof, double, front side openable, type IP-54 protection made of CRCA sheet 3.15 mm thick of outer panel and 2.00 mm thick inner compartment of panel size as per IS and having proper locking arrangement in front side door suitable for 440 volts, 50 Hz, 3 phase 4 wire system including cable glands of suitable size for incoming and outgoing cables and comprising with and including following accessories and mounted on PCC Platform min 45 cm from ground level and PCC 1:3:6, 100 mm thick, 0.5 m all round the panel board including disconnecting cable from old unsv LT feeder piller box with mccb, mcb, main switch, busbar and dismantling the same complete with the following items housed in :-
1
-
-
... More
BUSBAR :- 400 Amps rated copper bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite / DMC insulator bus bar support (Square / round) insulators of suitable size and good insulation resistance (Busbar to MCCB shall be connected through suitable size of copper busbar).
-
-
-
... More
INCOMING:- (i) 4 pole MCCB of capacity 320 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity 35/36 KA with thermal magnetic release type with overload adjustability - 01 No. (ii) Digital multifunctinal meter V, A, F, kW, KVA, kWh, kVAh, kVArh, THD, Neutral current, Max Demand (with RTC),- 01 No.
(iii) Indicator lamp with integral circuit (230/240 volt) and cluster LED (RED, ORANGE, BLUE) -01 set
(iv) CT (400/5A) -03 Nos
-
-
-
... More
OUTGOING:-
(a) 4 pole MCCB of capacity 100 Amp, breaking capacity 25 KA with thermal magnetic release, adjustable type with rotary handle - 03 Nos
(b) MCCB 4 pole of capacity 63 Amp breaking capacity 25 KA with thermal magnetic release, adjustable type with rotary handle - 02 Nos
-
-
-
... More
NOTE:- Rate quoted shall be deemed to be inclusive of replacement of all cable lugs, by removing damaged part of cable and taking out cable from loop to required length including necessary earth work as per site requirement or as directed by Engr-in-charge) Factory inspection at manufacturer premises shall be carried out by the officer detailed by Accepting Officer.
-
-
-
... More
Supply,installing, testing and commissioning outdoor type LT feeder piller box double door type (Safety Centre) of suitable size, padestal mounted, CPRI approved factory made totally enclosed, dust and vermin proof, double, front side openable, type IP-54 protection made of CRCA sheet 3.15 mm thick of outer panel and 2.00 mm thick inner compartment of panel size as per IS and having proper locking arrangement in front side door suitable for 440 volts, 50 Hz, 3 phase 4 wire system including cable glands of suitable size for incoming and outgoing cables and comprising with and including following accessories and mounted on PCC Platform min 45 cm from ground level and PCC 1:3:6, 100 mm thick, 0.5 m all round the panel board complete with the following items housed in :-
1
-
-
... More
BUSBAR :- 400 Amps rated copper bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite / DMC insulator bus bar support (Square / round) insulators of suitable size and good insulation resistance (Busbar to MCCB shall be connected through suitable size of copper busbar).
-
-
-
... More
INCOMING:-
(i) 4 pole MCCB of capacity 250 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity 35/36 KA with thermal megnatic release type with overload adjustability - 01 No. (ii) Digital multifunctinal meter V, A, F, kW, KVA, kWh, kVAh, kVArh, THD, Neutral current, Max Demand (with RTC),- 01 No.
(iii) Indicator lamp with integral circuit (230/240 volt) and cluster LED (RED, ORANGE, BLUE) -01 set
(iv) CT (400/5A) -03 Nos
-
-
-
... More
OUTGOING:- (a) 4 pole MCCB of capacity 100 Amp, breaking capacity 25 KA with thermal magnetic release, adjustable type with rotary handle - 03 Nos
(b) 4 pole MCCB of capacity 63 Amp, breaking capacity 25 KA with thermal magnetic release, adjustable type with rotary handle - 01 Nos
-
-
-
... More
NOTE :- Rate quoted shall be deemed to be inclusive of replacement of all cable lugs, by removing damaged part of cable and taking out cable from loop to required length including necessary earth work as per site requirement or as directed by Engr-in-charge) Factory inspection at manufacturer premises shall be carried out by the officer detailed by Accepting Officer.
-
-
-
... More
Supply, installation, testing and commissioning of LT Busbar Chamber, factory made, 3 phase 4 wire, having 250 Amp insulated Aluminium Bus Bar mounted on 1.1 KV rating resin/porcelain insulators, outdoor pedestal type weather and vermin proof fabricated out of 3.15 mm thick mild steel black sheet , sloppy roof, powder coated inside and outside with approved paint over a coat of primer with front door hinged type including locking arrangement , two earth terminals, suitable cable glands for incoming and outgoing cables complete alongwith fixing materials such as bolts 7 nuts and it should be mounted on 40x40x6 mm angle frame with a clearance of at least 0.45 mtrs above GL and grouted in ground 0.30 mtrs including required PCC for foundation coping complete all as specified and directed.
4
-
-
... More
M&L for drilling manually in soft/loose soil under road/hard standing/culvert/nala of suitable bore for protection GI pipe upto 80 mm bore complete all as specified and as directed . Note: Depth of bore shall not be more than 1 Mtr from original ground level complete all as specified and directed.
100
-
-
... More
M&L for 50 mm dia galvanised steel tubing, light grade, with all necessary fittings and fixtures laid in trenches, fixed to walls, poles, under road/floor etc for cable protection complete all as specified and directed.
60
-
-
... More
M&L for 80 mm dia galvanised steel tubing, light grade, with all necessary fittings and fixtures laid in trenches, fixed to walls, poles, under road/floor etc for cable protection complete all as specified and directed.
40
-
-
... More
M&L for Earthing complete with GI earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below GL) with top edge of the plate not less than 1.5 m below the normal ground level connected with GI strip 32x6 mm thick by means of bolts, nuts, check nuts and washers of galvanised iron or steel including necessary excavation & earth work in any type of soil, removing surplus soil to a distance not exc 50 m, with and including PCC chamber in PCC (1:2:4), type B-1 using 20 mm graded stone aggregate, mild steel frame made out of angle iron of size 40 mm x 40 mm x 3 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6 mm thick CI cover with handle, watering arrangement with funnel internally secured with wire mesh with 20mm dia medium grade pipe for watering, 40 mm dia light grade GI pipe for lead protection in and including alternate layer of charcoal dust and common salt complete all as shown in electrical plate No. 3 connected to earthing test point all as specified and indicated including testing on completion as directed. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.
10
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%