Military Engineer Services Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date17 May 2025
Closing Date16 Jun 2025
Tender Amount₹ 3,40,96,000
Technical
Technical
Financial
Technical Capacity
... View More
The required prior work experience for the bidder varies by class. The criteria include having satisfactorily completed works with a specific value. Here's a breakdown of the requirements: - Class 'SS': Two works costing not less than 12.00 crore each, or one work costing not less than 20 crore, and an average annual turnover of not less than 20 crore for two consecutive years.
- Class 'S': Two works costing not less than 7.50 crore each, or one work costing not less than 15 crore.
- Class 'A': Two works costing not less than 4.00 crore each, or one work costing not less than 6.00 crore.
- Class 'B': Two works costing not less than 1.50 crore each, or one work costing not less than 2.50 crore.
- Class 'C': Two works costing not less than 50.00 lakh each, or one work costing not less than 80.00 lakh.
- Class 'D': Two works costing not less than 25.00 lakh each, or one work costing not less than 40.00 lakh.
- Class 'E': Three works costing not less than 7.50 lakh, or two works costing not less than 10.00 lakh each, or one work costing not less than 20.00 lakh. The average annual turnover for the last two consecutive years is specified for each class:
- Class 'SS': Not less than 20 crore.
- Class 'S': Not less than 12 crore.
- Class 'A': Not less than 6.00 crore.
- Class 'B': Not less than 300.00 lakh.
- Class 'C': Not less than 100.00 lakh.
- Class 'D': Not less than 50.00 lakh.
- Class 'E': Not less than 25.00 lakh. No specific percentage of similar works completed is mentioned. However, the bidder should have satisfactorily completed the requisite value works. The amount of 5% of the contract sum is mentioned as the Performance Security Deposit.
Costs
EMD
₹ 4,16,000Document Cost
₹ 2,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_708801_1Tender No
CELZ/PRJ/T-29 of 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
M & L for Glazed ceramic tiles in vertical surface of size 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including screed bed 10mm thick in cement mortar 1:4 finished rough to receive wall tiles etc, complete all as specified and directed.
1925
-
-
... More
M & L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6, complete all as specified and directed.
225
-
-
... More
M&L for non skid joint free ceramic coloured tiles 7mm to 8mm thick (Square/ rectangular) area of each tile not exc 0.11sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6, complete all as specified and directed.
49
-
-
... More
M&L for Vitrified Ceramic coloured tiles double charged stain free10 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6, complete all as specified and directed.
2221
-
-
... More
M&L for Vitrified Ceramic coloured tiles double charged stain free 10 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4, complete all as specified and directed.
213
-
-
... More
M&L for 15mm thick Udaipur green marble fixed on windows cills/staricase steps including 12mm thick in cement mortar (1:3) and pointing in wite cment (1:2) using marble dust with admixture of pigment to match with shade of granite over 10 mm thick rendering in cement mortar 1:4 including moulding of exposed edges of marble, complete all as specified and directed.
18.5
-
-
... More
M&L for granite 18 to 20mm thick of any type work table rubbed and polished on cooking platforms/WHBs/shelves and like in cement morter (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl half molding, complete all as specified and directed.
51.2
-
-
... More
S&F 18 mm thick PVC sheet minimum 600 Kg density grade 1 quality one side decorative lamination and other side plain white colour on walls fixed with screws, solvent cement/adhesive as per manufacturer instructions, complete all as specified and directed.
Note :- Colour and design of prelaminated board shall be approved by Engr-in-Charge
65
-
-
... More
Taking down chowkhat or frames with shutters (without taking off shutters from the frames) area exc1.5 but n. exc 4 Sqm each, complete all as specified and directed.
10
-
-
... More
Taking down chowkhat or frames with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each, complete all as specified and directed.
5
-
-
... More
S & F Solid PVC moulded door frame of size 50mm x 47 mm made out of 5 mm thick single side prelam PVC sheet reinforced with MS square tube, complete all as specified and directed.
50
-
-
... More
S & F factory made Solid PVC moulded door shutters 28 to 30 mm thick (stiles) with particle board core, with 2, raised panel design with 2 mm thick moulded Prelam on front face and 2 mm thick prelam PVC sheet on back side, complete all as specified and directed.
20
-
-
... More
M&L for fabrication & fixing of powder coated Anodised aluminium door (Frame section 104.00 x 44.45mmx 1.5mm thick) with shutters aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws, 2 layer brass mortice lock etc. including fully selected quality glass 5mm thick with rubber packing, complete all as specified and directed.
194
-
-
... More
M&L for fabrication & fixing of powder coated anodised aluminium window, ventilator sliding type and partition with frame of section 62.3mmx38.0 mm x 1.5mm, sliding shutter 38.00x 18mm, including joining cleat for fixing builder hardware glazing clips rubber packing for air lock purpose anodized aluminum strip beading screw, shelf closing locking arrangements etc including fully selected quality glass 5mm thick with rubber packing, complete all as specified and directed.
238.73
-
-
... More
S&F powder coated anodised aluminium powder coated Grill of size 75 x 75x 4mm thick for windows, including joining cleat, anodized aluminum strip beading screw, complete all as specified and directed.
205
-
-
... More
Supply and fix kitchen cabinet & wardrobe/ cupboard made out of 16 to 18 mm thick PVC board laminated sheet, complete all as specified and directed.
30
-
-
... More
S&F cromium plated corrosion resistance self closing hinges, complete all as specified and directed.
10
-
-
... More
S&F magnetic catches with steel body ‘H’ type, fixed to shutter, complete all as specified and directed.
5
-
-
... More
S & F 75 mm dia stainless steel handle cast type polished bright finish, complete all as specified and directed.
5
-
-
... More
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed.
1455
-
-
... More
S&F 4mm thick E-boards tiles false ceiling with powder coated GI snap grid frame work including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type BO/Cement mortar 1:3 complete all as specified and directed including all necessary drilling and necessary arrangement to fix electrical items as under:- (a) 25x25x1.6mm thick GI angle powder coated duly plugged @ 600mm centre to centre along perimeter of wall. (b) 25x25x1.5mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders with adjustable clamps and dash free fastners plugging in RCC slab placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of 4mm thick E-boards tiles of size 595x595mm of approved texure and finished complete with two coats of oil emulsion distemper on ceiling.
NOTE: The complete ceiling work shall be done as per manufactures instruction and as directed.
2827
-
-
... More
M&L for preparation of old painted surface of steel and iron of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted, complete all as specified and directed.
20
-
-
... More
M&L for preparation of old painted surface of wood and wood based materials of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted, complete all as specified and directed.
10
-
-
... More
S&F 200 mm long aluminium anodized barrel tower bolt of extruded section, complete all as specified and directed.
97
-
-
... More
S&F 150 mm long aluminium anodized barrel tower bolt of extruded section, complete all as specified and directed.
20
-
-
... More
S&F 100mm long Stainless steel butt hinges of extruded section, pin anodized, complete all as specified and directed.
30
-
-
... More
S & F aluminium bow handle, cast type, anodised 150mm long complete fixed with steel screws, complete all as specified and directed.
20
-
-
... More
S&F 150mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded
sections or cast-aluminium alloy and fixed, complete all as specified and directed.
10
-
-
... More
M&L Door closer hydraulically regulated, designation No. 3, universal type, aluminium extruded section body suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.
97
-
-
... More
M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick
aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.
97
-
-
... More
S&F in repair Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.
50
-
-
... More
S&F expanded metal exc 4 kg, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members, complete all as specified and directed.
752.5
-
-
... More
S&F hand rails, half round or other steel section or core for wooden hand-rail straight portion,
drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, complete all as specified and directed.
201
-
-
... More
M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane including hacking out of old glass of any description, complete all as specified and directed.
5
-
-
... More
M&L for 4mm thick frosted glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane including hacking out of old glass of any description, complete all as specified and directed.
5
-
-
... More
Dismantling of old PVC water tanks of 1000 Litres capacity and S&F for rotational moulded,multilayer HDPE water storage tank (triple layer white colour) of 1000 litres capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms ) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.
5
-
-
... More
Dismantling of old PVC water tanks of 2000 Litres capacity and S&F for rotational moulded,multilayer HDPE water storage tank (triple layer white colour) of 2000 litres capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms ) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.
3
-
-
... More
Taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc, complete all as specified and directed.
100
-
-
... More
Taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc, complete all as specified and directed.
75
-
-
... More
Taking up or down steel water tubing and connections of 25mm bore, fixed in walls, ceiling, floors, trenches etc, complete all as specified and directed.
25
-
-
... More
S&F GI Steel water tubes medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors, complete all as specified and directed.
80
-
-
... More
S&F GI Steel water tubes medium grade, ISI marked, galvanised, 20mm bore with all fittings, fixed to walls and ceiling or laid in floors, complete all as specified and directed.
35
-
-
... More
S&F GI Steel water tubes medium grade, ISI marked, galvanised, 25mm bore with all fittings, fixed to walls and ceiling or laid in floors, complete all as specified and directed.
15
-
-
... More
Fixing only old steel tubing and connection in new or old position in wall/ceiling/floor etc bore of pipe 15mm dia with new fittings , complete all as specified and directed.
20
-
-
... More
Fixing only old steel tubing and connection in new or old position in wall/ceiling/floor etc bore of pipe 20mm dia with new fittings, complete all as specified and directed.
40
-
-
... More
Fixing only old steel tubing and connection in new or old position in wall/ceiling/floor etc bore of pipe 25mm dia with new fittings, complete all as specified and directed.
10
-
-
... More
Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exc 10cm girth in brick walls, complete all as specified and directed.
100
-
-
... More
S&F in repair 15mm bore, CP Bib taps fancy type long body , half / full turn , screwed down for iron pipes, complete all as specified and directed.
35
-
-
... More
S&F in repair 15mm bore, two way CP Bib taps fancy type long body , half / full turn , screwed down for iron pipes, complete all as specified and directed.
28
-
-
... More
S&F brass medical bib tap 15mm bore, elbow wrist operated long handle deck mounted for medical and surgical polished cp finish, screwed down for iron pipes, complete all as specified and directed.
4
-
-
... More
M & L in repair 15mm angle valves/ stop cock, fancy type, chromium plated , cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.
79
-
-
... More
S&F in repair CP Stop valve/angle valve 15 mm bore (weight should not be less than 0.4kg each), fancy type chromium plated with long shank and cup (concealed type), high pressure crutch or butter fly handle screwed both ends screwed for iron pipe or for unions, complete all as specified and directed.
12
-
-
... More
S&F in repair, two way angle valve chromium plated, brass 15mm bore, complete all as specified and directed.
5
-
-
... More
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed.
33
-
-
... More
S&F in repair 15mm dia CP wall mixture for mixing hot & cold fancy type screwed down ,high pressure long screwed shanks and fly nuts , screwed for iron pipe, complete all as specified and directed.
10
-
-
... More
S&F in repair central hole basin mixer without popup waste system with 450mm long braided hoses, quarter turn, brass chromium plated, fancy type with all accessories and fixed, complete all as specified and directed.
10
-
-
... More
S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and directed.
3
-
-
... More
S & F in repairs shower CP fancy type 125 mm including shower arms, complete all as specified and directed.
12
-
-
... More
S&F in repair vitreous china urinal, half stall type (flat back) with CP spreader, of size 635x395x420mm, white, with grating and union for discharge pipe (excluding flushing cistern) including 32mm dia PTMT coupling and waste pipe, providing and fixing plugs, bedding urinal against wall in CM 1:2, with CP spreader etc, complete all as specified and directed.
4
-
-
... More
S & F 5.5mm thick bevelled edge mirror of selected quality glass, mounted on wall with stainless steel struts screw, complete all as specified and directed.
15
-
-
... More
S&F in repair brass chromium plated towel rail 20mm dia D type, 60cm long between flanges fixed with screw to wall complete, complete all as specified and directed.
15
-
-
... More
S & F in repair Towel ring chromium plated, complete all as specified and directed.
10
-
-
... More
S&F in repair Soap dish, stainless steel, fixed to plugs with chromium plated brass screws, complete all as specified and directed.
15
-
-
... More
S&F in repair CP brass toilet paper holder, superior quality, complete all as specified and directed.
3
-
-
... More
S&F in repair single piece WC with PP soft close seat cover, Hinges, fixing Accessories, Accessories set and cistern fittings , size 360x640x680 mm white, S trap/P trap 220mm, etc. complete including making good to floor, complete all as specified and directed.
3
-
-
... More
S&F in repair vitreous china wash down water closet pan pedestal pattern white including connection in drain and in flushing pipe complete including 'P' or 'S' trap and plastic water closet seat cover, complete all as specified and directed.
15
-
-
... More
S&F in repair vitreous china wash down water closet of "Orissa" pattern size 580 x 440 mm white with integral foot rests including removing filled lean concrete from sunken portion and putting of lean concrete after treatment of sunken slab, connection to trap and to flushing pipe etc complete and making good to floor, complete all as specified and directed.
18
-
-
... More
S&F in repair PVC Flushing cistern 10 litre capacity with inlet ball valve float and handle and 32mm bore flush pipe including bracket, complete all as specified and directed.
33
-
-
... More
M&L in repair Vitreous China wash basin, white, flat back, size 630x450mm including brackets, tap, cutting for and pinning in ends of brackets or erecting stand, brackets and waste pipe, 32mm dia chromium plated waste coupling etc, complete all as specified and directed.
27
-
-
... More
S&F in repair vitreous china table top wash basin, white, of size 480 X 370mm fixed on granite including cutting for and pinning in ends in CM 1:3 including tap, 32mm waste pipe, 32mm dia chromium plated waste coupling, complete all as specified and directed.
4
-
-
... More
S & F in repair PVC connection 15 mm bore, 450 mm long complete with both ends unions, complete all as specified and directed.
69
-
-
... More
M&L PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm dia, complete all as specified and directed.
17
-
-
... More
Demolition and breaking up (salt glazed ware, AC, PVC) drain pipes of 100mm dia set in cement mortar complete, complete all as specified and directed.
100
-
-
... More
S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.
10
-
-
... More
S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.
5
-
-
... More
S & F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, 110mm bore, complete all as specified and directed.
65
-
-
... More
S&F 75 mm bore PVC (SWR) pipe single socket in any length with rubber ring joints fixed to walls complete all as specified and directed.
20
-
-
... More
S&F PVC (SWR) Bend 75mm dia, complete all as specified and directed.
5
-
-
... More
S&F PVC (SWR) Bend 110mm dia, complete all as specified and directed.
10
-
-
... More
S&F 32mm Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc, complete all as specified and directed.
10
-
-
... More
M&L for normal water proofing treatment on roof slab consisting with following operations :-
(i) Removal of old existing treatment on roof slab.
(ii) Existing surface shall be cleaned of all dust, fungus, moss and other foreign material etc by using wir brush & dusting, Apply a layer of bituminous primer conforming to IS 3384 @ 0.4 Litre/m2 on the surface. Laying 3mm thick APP membrane having non-woven polyester matt at core and under surface coated with plastic polythene film. Laying shall be done using butane torch maintaining 100mm ie overlap & 150mm end overlap, sealling all overlaps complete including treatment at all junctions & corners. The membrane shal be tucked into groove on vertical plane and groove sealed with cement mortar. The treatment shall be provided upto 200mm height above finished floor Note- The membrane shall have tensile strength of 700N/5cm in longitudinal direction and 450N/5cm in transverse direction at 23 degree celcius, Flow resistance>120 degree celcius, dimensional stability < 0.5% when tested as per ASTM D 5147. The laying of the membrane shall be done through authorized applicator of the manufacturers'
(iii) Applying two coats of bituminous aluminium paint @ 0.30 litre per sqm over APP membrane.
2325
-
-
... More
Supply and applying for component elastomeric acrylic polymer modified cementitious water proofing coating smart care damp block 2K Suprema of Asian make in 2 coats over the prepared surfaces (wall/sunken floors) at a coverage of 1.5 Kg/sqm. The coating shall have 80% elongation as ASTM D412 resisting 5 bars hydro static pressure as per D1N 1048 reduction to rapid chlorides shall be 70 as per D1N 1048, crack bridging upto 1.2mtr as per ASTM 45485. The coating have food grade certificate from laboratories like CFTRI. The max ratio of coating shall be 2 part of powder & 1 part of liquid within any water addition in the mixing etc complete as per manufacturer specifications and after the surface dried, plaster the surface with 15mm thick CM 1:4 complete all as specified and directed.
Note : All water proofing treatment will be executed by the authorised representative of Asian Paints.
20
-
-
... More
S&F in repair stainless steel sink with drainage board, made out of 1.00 mm thick stainless steel sheet conforming to AISI 304 with plug, washers, waste pipe, cast iron cantilever brackets, connecting union over all size 915 mm X 460 mm with bowl size 410 mm x 330mm x 160 mm, complete all as specified and directed.
3
-
-
... More
M&L for complete removal of existing finishes of wall including cornices etc and applying 1-2mm thick white putty in one coat and applying two coat oil bound distemper over a coat of water based primer, complete all as specified and directed.
1071
-
-
... More
M&L for prepararion of old plastered or unplastered surfaces of wall and applying two coats of weather coats over a coat of exterior grade primer with applying 1-2 mm thick white putty in one coat, complete all as specified and directed.
745
-
-
... More
S&F in repair 25mm dia stainless steel Drapery rod fixed with decorated brackets and with end knobs, complete all as specified and directed.
350
-
-
... More
Demolition of brick work built in cement mortar and removing rubbish, complete all as specified and directed.
2.42
-
-
... More
M & L Brick work with fly Ash old size bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 , complete all as specified and directed.
12.5
-
-
... More
M & L Brick work with fly Ash old size bricks, straight or curved on plan to any radius, half brick thick walls, built in cement mortar 1:6, complete all as specified and directed.
8.5
-
-
... More
M&L for rendering 15mm thick plaster on fair faces of brick or stone walls in CM 1:6 finished even and smooth without using extra cement, complete all as specified and directed.
113
-
-
... More
M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of primer, complete all as specified and directed.
113
-
-
... More
M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for flat rough finished surfaces of concrete, complete all as specified and directed.
97
-
-
... More
M&L for RCC M-25 slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.
7.3
-
-
... More
M&L providing precast cement concrete type B-1 (1:2:4, using 20mm graded crushed stone aggregate) in window or door cills, lintels, quoin blocks (for use with masonry), string courses, copings.kneelers, bedblock etc set in CM (1:4), complete all as specified and directed.
2.25
-
-
... More
Excavation over areas, n.exc 1.5m depth and getting out in soft/ loose soil, complete all as specified and directed.
202.06
-
-
... More
Excavation over areas, exc 1.5m depth but not exc 3.0 and getting out in soft/ loose soil, complete all as specified and directed.
13.47
-
-
... More
Excavation in trenches n exc 1.5 m wide and n exc 1.5 m deep, for foundation n exc 10 sqm on plan and n exc 1.5m in depth , in soft/ loose soil, and getting out, complete all as specified and directed.
369.43
-
-
... More
Surface dressing n.exc 15cm deep in soft / loose soil, complete all as specified and directed.
201
-
-
... More
Returning filling in of excavated soil, including spreading , levelling , watering and well ramming in layers not exc 25 cm thick, complete all as specified and directed.
258.75
-
-
... More
Removing excavated material (Soils) to a distance n exc 50m and depositing whered directed at a level n exc 1.5m above the starting point, complete all as specified and directed.
326.21
-
-
... More
M&L for PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate, in foundation, filling and mass concrete, complete all as specified and directed.
21.77
-
-
... More
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surfaces, complete all as specified and directed.
151.53
-
-
... More
M&L for formwork to faces of walls, parapets and staircase railings and similar work including attached pillasters, buttresses, etc. vertical or to batter for rough finished surface, complete all as specified and directed.
245.6
-
-
... More
M&L for formwork to soffits of as roof slabs, floor slabs, landing and similar work horizontal or slopy not exceeding 200m thick for rough finished, complete all as specified and directed.
296.21
-
-
... More
M&L for form work to sides and soffit of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc for rough finished surface, complete all as specified and directed.
291.4
-
-
... More
M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surface, complete all as specified and directed.
358.4
-
-
... More
M&L for form work to edges of concrete flat exc 10 cm but n exc 20 cm wide , for rough finished surface, complete all as specified and directed.
201
-
-
... More
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.
51.77
-
-
... More
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts, complete all as specified and directed.
31.36
-
-
... More
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed.
40.35
-
-
... More
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.
59.43
-
-
... More
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in Fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the like, complete all as specified and directed.
24.56
-
-
... More
S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required , including cranking , bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.
16000
-
-
... More
M&L for TMT steel bars 5mm dia and over upto and including 10mm dia in strriups,spaces,nibs and binders, complete all as specified and directed.
6500
-
-
... More
M & L for rendering 5 mm thick plaster in cement mortar (1:3), finished even and fair without using extra cement on fair faces of brick work or concrete surfaces, complete all as specified and directed.
559.2
-
-
... More
M & L for rendering 5 mm thick plaster in cement mortar (1:3), finished even and fair without using extra cement on brick or concrete surfaces of ceiling, complete all as specified and directed.
717.76
-
-
... More
M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper over chalk whiting primer on plaster surfaces, complete all as specified and directed.
687.61
-
-
... More
M&L for preparation of new plastered surfaces of wall and applying two or more coats of Acrylic Smooth exterior paint of required shade applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 kg/10 sqm over 1 mm thick wall care putty , complete all as specified and directed.
589.35
-
-
... More
Providing and laying 12-15 mm thick factory made heavy duty designer endura floor tiles size not less than 400x400mm with approved colour, design and pattern as in footpath, parks, lawns etc of required strength, jointed and pointed in neat cement slurry and pigments in floors including 15mm thick screed bed in CM 1:4, complete all as specified and directed.
70.35
-
-
... More
S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.
(Note: stainless steel butt hinges shall be paid separately)
3.9
-
-
... More
Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 X 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
6.2
-
-
... More
S&F 100 mm size stain less steel butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.
8
-
-
... More
S&F 150 mm size stain less steel handle, fabricated type, anodised, fixed with screws, complete all as specified and directed.
4
-
-
... More
S&F 200mm long stain less steel tower bolt of extruded section, fixed with stainless steel screws, complete all as specified and directed.
2
-
-
... More
S&F 300 mm long stain less steel sliding door bolt with hasp, staple (bolt type), complete all as specified and directed.
1
-
-
... More
S&F 125 mm long, 12 mm dia stain less steel Dash fasteners for door frames etc incl necessary drilling etc, complete all as specified and directed.
8
-
-
... More
M&L for rendering 10mm thick plaster in CM 1:3, mixed with liquid water proofing compound over concrete surface of roof when concrete is green, complete all as specified and directed. (Note : WPC to be mesured and paid separately)
235
-
-
... More
Cleaning the dust,dirt and any other foreign material from roof surface and applying a coat of bituminous primer @ 0.40 litre / Sqm uniformily and primer shall be allowed to dry over night as conforming to IS 3384-1986, complete all as specified and directed.
235
-
-
... More
M&L for Laying of minimum 3mm thick APP membrane of (reinforced with non-woven fabric polyester type wt not less than 150 gms/sqm) & minimum weighing 3kg/sqm shall be done using butane torch maintaining 100mm side overlap and 150mm end overlap,sealing all overlaps and bonded to the surface by fusing and bonding torchon method complete all as specified and directed. (Note: All water proofing work shall be done as per manufacturer instruction and under supervision of manufacturer technical representative.)
235
-
-
... More
M&L for two coats of bituminous aluminium paint @ 0.30 litre per sqm over APP membrane on non assesible roof area, complete all as specified and directed.
235
-
-
... More
Supply only Liquid water proofing compound (ISI marked), complete all as specified and directed.
5.5
-
-
... More
S&F 25mm thick Preformed joint filler for crumple joint etc conforming to 1838-1961and top 30mm primed and sealed with sealing compound, Grade ‘A’, complete all as specified and directed.
27.3
-
-
... More
M&L for 150 mm wide aluminium strip 0.50 mm thick bent to shape, fixed with 50 mm SS screws @ 300 mm C/C one side along the crumple joint, complete all as specified and directed.
60
-
-
... More
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors,and making good disturbed portion / surface of wall/ floor/ ceiling etc by using cement mortar (1:4) including white / colour wash / distempering etc as required to match with the existing surfaces / location, complete all as specified and directed.
941
-
-
... More
M&L for point wiring complete for One light/Fan/Exhaust Fan/Bell point controlled by one switch with PVC insulated and unsheathed FRLSH cable 1.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 20 mm dia PVC conduit medium grade concealed in wall and heavy duty PVC conduit not less than 20 mm in roof / floor slab and ceiling, pressed GI concealed terminal boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of required colour complete, including 1.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed.
Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost
404
-
-
... More
Description all as per Srl item No 138 here-in before but One socket outlet point 5 Amp on independent board, complete all as specified and directed.
235
-
-
... More
Description all as per Srl item No 138 here-in before but One socket outlet point 5 Amp on same board, complete all as specified and directed.
28
-
-
... More
M & L for point wiring with 2.5 Sqmm (nominal cross-sectional area) FRLS PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC concealed conduit of adequate size with all fittings and accessories including modular GI sunken box with modular cover plate with frame of suitable size including one run of FRLS PVC insulated & unsheathed single core multistranded copper conductor cable of size 2.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly for 16 Amp socket on independent board, complete all as specified and directed.
227
-
-
... More
Description all as per Srl item No 141 here-in before but concealed point wiring with 4.0 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLS) cable and 4 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLS) cable, green colour as earth continuity wire for one AC socket point on independent board, complete all as specified and directed.
47
-
-
... More
M&L for ceiling rose in polycarbonate 3 terminal brass flush type 6 Amps, 250 Volts, AC supply (ISI marked), fixed on wall & including 3 mm thick 75mm dia sunmica hylum laminated round sheet, complete all as specified and directed.
285
-
-
... More
S&F Modular switch 1 way, 6 Amps, 1 module, complete all as specified and directed.
667
-
-
... More
S&F Modular Switch 1 way 16 Amps, 1 module, complete all as specified and directed.
227
-
-
... More
S&F Modular socket 6A, 2/3 pin combined 2 module, complete all as specified and directed.
263
-
-
... More
S&F Modular socket 6 Amps/16 Amps, 2/3 pin combined 2 module, complete all as specified and directed.
227
-
-
... More
S&F Modular bell push flush type 6 Amps, 1 Module, complete all as specified and directed.
4
-
-
... More
S&F in replacement, bell Ding Dong type AC 230 Volts, complete all as specified and directed.
4
-
-
... More
S&F sheet metal enclosure VTPN MCCB DB 4 way, 415 V (vertical type) with bus bar double door type IP 43 - IK 09 with copper busbar for each phase for DB when MCCB 160(as incomer) to be used, fixed properly on / in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs for cables/wires, complete all as specified and directed. Note :-(a) MCBs/MCCB shall be deemed to be included under respective item of Sch.
(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.
4
-
-
... More
S&F in replacement of sheet metal enclosure VTPN MCCB DB 4 way, 415 V (vertical type) with bus bar double door type IP 43 - IK 09 with copper busbar for each phase for DB when MCCB 100 (as incomer) to be used, fixed properly on / in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs for cables/wires, complete all as specified and directed. Note :-(a) MCBs/MCCB shall be deemed to be included under respective item of Sch.
(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.
2
-
-
... More
S&F, in replacement, double door metallic sheet metal enclosure for DB when MCBs to be used SPN 12 ways, 240 V with 100 Amps rated bus bar IP 43 - IK 09 complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires, complete all as specified and directed.
4
-
-
... More
S&F, in replacement, double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 100 Amps rated bus bar IP 43 - IK 09 complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires, complete all as specified and directed.
15
-
-
... More
S&F, in replacement, double door metallic sheet metal enclosure for DB when MCBs to be used SPN 4 ways, 240 V with 100 Amps rated bus bar IP 43 - IK 09 complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires, complete all as specified and directed.
5
-
-
... More
Supply and fixing in replacment of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning, complete all as specified and directed.
212
-
-
... More
Supply and fixing in replacment of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles & Neutral and current carrying capacity 40 to 63 AMP, in the MCB DB Complete with connection testing and commissioning, complete all as specified and directed.
24
-
-
... More
M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 3.15 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to copper strip 20 x 3mm as earth lead strip by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 40 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. Notes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I
(ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate.
(iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any varriation in quantity shall be adjusted.
12
-
-
... More
M&L in replacment of two single core (submain) FRLS PVC insulated cable of 10.00 Sqmm nominal dia and one single core green PVC insulated copper conductor earth continuity cable of 10.00 sqmm nomianal dia as mentioned below is drawn in and including non metallic, medium duty, rigid PVC conduit not less than 20 /25mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making good to disturbed surfaces with cement mortar ratio of 1:4 and colour wash complete all as directed. Note :- (i) The cost for cutting, chases including dismantling/taking down old existing sub main with E/M fixtures shall deemed to be included in the quoted unit rate.
(ii) Two run of submain wire, one run of earth wire and one run of PVC conduit shall be measured one RM
60
-
-
... More
Description all as per Srl item No 158 here-in before but two single core (submain) FRLS PVC insulated cable of 6.00 Sqmm nominal dia and one single core green PVC insulated copper conductor earth continuity cable of 6.00 sqmm, complete all as specified and directed.
390
-
-
... More
Description all as per Srl item No 158 here-in before but two single core (submain) FRLS PVC insulated cable of 4.00 Sqmm nominal dia and one single core green PVC insulated copper conductor earth continuity cable of 4.00 sqmm, complete all as specified and directed.
120
-
-
... More
Supply and fixing ceiling fans complete copper wound with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and old one dismantling/disconnecting from existing munting arrangement and deposit to MES store, complete all as specified and directed.
104
-
-
... More
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm, complete all as specified and directed.
3
-
-
... More
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers, complete all as specified and directed.
9
-
-
... More
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380m sweep with, blades, and frame and louvers, complete all as specified and directed.
2
-
-
... More
S & F LED tube light fittings decorative ultra slim linear fixture with extrudedalluminium heat sink envioromentel friendly Energy efficient ready to use pack, 20 Watt, 120 lumen/watt, 4 feet,surface mounting type extruded pvc, snap on installers and domestic electronic Driver ,connector block ect.with all assoceries intenallt prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps, complete all as specified and directed.
50
-
-
... More
S&F in replacement of existing worn out LED luminaire 600 mm x 600 mm, 35/36 watt,120 lumen /watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed.
115
-
-
... More
Supply & fixing energy efficient LED light of 10 Watt of length - 02 Feet long having minimum 120 lumen /watt output, wide voltage protection range 140-270 Volt AC housed in extruded aluminum housing (enhances safety) with high quality polycarbonate diffuser including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076, complete all as specified and directed.
12
-
-
... More
Supply & fixing energy efficient LED light of 5 Watt 120 lumen /watt of wide voltage protection range 140-270 Volt AC housed in extruded aluminum housing (enhances safety) with high quality polycarbonate diffuser including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076, complete all as specified and directed.
95
-
-
... More
Supply and fixing LED street light fitting 35 Watt 120 lumen /watt, 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including bracket for street light made out of 40 mm bore GI pipe medium grade not less than 1.2 mtr length bent at 120 degree to shape fixed on pole/wall with and including 50x6mm FI clamps = 02 Nos with nut bolts, washers including painting of clamps with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
10
-
-
... More
M & L for single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 240 volt capacity complete all as directed.( for AC), complete all as specified and directed.
47
-
-
... More
Supply and fix electric water heater, storage type steel body with inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and directed.
12
-
-
... More
Taking down old unservicable cable any type and make including dismatling of existing LT panel/busbar/complete., complete all as specified and directed.
1620
-
-
... More
Supplying and laying reinforced precast concrete cable cover, Class LV, Type I, flat, size 250
mm x 150mm x 40mm to cover/laid over the cable in cross direction to give mechanical protection to under ground cable, complete all as specified and directed.
7800
-
-
... More
M & L for sand cushioning with Ganga Sand to underground cable, 8 cm thick before laying and 15 cm thick after laying the cable, complete all as specified and directed. Note :- Punned thickness shall be measured and paid.
134.55
-
-
... More
Material & Labour for Cement concrete in foundation, filling and mass concrete type B2 1:4:8 (40mm graded aggregate). Not exceeding 15 CM in depth for plinth protaction for path including dismentling of old surface, complete all as specified and directed.
2
-
-
... More
M&L for making horizontal boring 60 cm deep below road crossing for passing of LT cable in GI pipe, complete all as specified and directed.
100
-
-
... More
M&L (in replacement) for 50 mm bore GI tubing 'light grade' with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size, complete all as specified and directed.
80
-
-
... More
M&L (in replacement) for 80 mm bore GI tubing 'light grade' with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size, complete all as specified and directed.
50
-
-
... More
Supplying , laying, jointing and testing in replacement of 400 Sqmm 3.5 core cable XLPE (LT) insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor, complete all as specified and directed.
450
-
-
... More
Description all as per Srl item No 179 here-in before but 300 Sqmm bore 3.5 core, complete all as specified and directed.
750
-
-
... More
Description all as per Srl item No 179 here-in before but 185 Sqmm bore 3.5 core, complete all as specified and directed.
300
-
-
... More
Description all as per Srl item No 179 here-in before but 120 Sqmm bore 3.5 core, complete all as specified and directed.
120
-
-
... More
Supply, installation, testing and commissioning in replacement of electrical cubical control panel board an CPRI Approved factory assembled made outdoor type feeder pillar box double door type wheather and vermin proof fabricated of 3.15 mm CRCA MS sheet of Suitable size,3 phase 4 wire 415 Volt ac 50 Hz complete duly painted with powder coating complete with locking arrangement, earthing terminals with suitable rating copper strips for incoming/outgoing MCCB's including and Mounting measuring instrument such as Volt meter, Ammeter, Selector switchs, CT's, Phase indicator lamps with holder , toggle switches and backelite fuse cut outs etc including incoming and outgoing cables connections with suitable cable glands and end termination including grouting of feeder pillar box 60 cm above ground level by providing 90 cm long angle iron size 50x50x6mm welded onall four corner embedded in PCC (1:2:4) using 20mm graded upto 30cm complete all as specified and directed by the Engg-in-charge. (Main LT panel for Fam ward) :4 Nos electrolytic copper bus bars of high conductivity proper insulated of 1 ½ times of the incoming capacity with provision of extension and mounting on porcelain support:-
INCOMING :-
(a) MCCB 4 pole 630 Amp,microprocessor type , 415 volt, 50 KA,Ics=100% Icu as per IEC 60947-II-01 No
OUTGOING :
(b) MCCB 4 pole 250 amp, 415 volt, 35 kA, Ics=100% Icu as per IEC 60947-II,adjustible thermal magnetictype- 06 No (5 out going and 1 spare (For lighting and Eqipment load) (c) MCB SPN 63 amp, 240 volt, 10 KA - 06 Nos (d) Volt meter (0-500V) three phase, digital type with selector swirch -01 No . (e)Ammeter(0-500A) three phase, digital type with selector swirch with suitable capacity of CTs-01 set.
(f) ON/OFF indication lamp with toggle switch- Set of 03.
(g) The cost of Grouting of panel including PCC is deemed under respective item .
1
-
-
... More
supply, installation, testing and commissioning in replacement of electrical cubical control panel board an ISO 9001 factory assembled made outdoor type feeder pillar box double door type wheather and vermin proof fabricated of 3.15 mm CRCA MS sheet of Suitable size,3 phase 4 wire 415 Volt ac 50 Hz complete duly painted with powder coating complete with locking arrangement, earthing terminals with suitable rating copper strips for incoming/outgoing MCCB's including and Mounting measuring instrument such as Volt meter, Ammeter, Selector switchs, CT's, Phase indicator lamps with holder , toggle switches and backelite fuse cut outs etc including incoming and outgoing cables connections with suitable cable glands and end termination including grouting of feeder pillar box 60 cm above ground level by providing 90 cm long angle iron size 50x50x6mm welded onall four corner embedded in PCC (1:2:4) using 20mm graded upto 30cm complete all as specified and directed by the Engg-in-charge. (LT panel for Acute med ward) (a) MCCB 4 pole 250 amp, 415 volt, 35 KA Adustable thermal megnetic type, Ics=100% Icu as per IEC 60947-II - 01 No
OUTGOING :
(b) MCCB 4 pole 160 amp, 415 volt, 35 KA,Ics=100% Icu as per IEC 60947-II adjustible thermal magnetic type- 01 No (OPD & Pathology Lab)
(d) MCCB 4 pole 100 amp, 415 volt, 25 KA,Ics=100% Icu as per IEC 60947-II thermal adjustible and fixed magnetic type- 04 Nos ( Medical , Surgical, Blood bank & 01 Spare)
(f) Volt meter (0-500V) three phase, digital type with selector swirch -01 No . (g) Ammeter(0-500A) three phase, digital type with selector swirch with suitable capacity of CTs-01 set. (h) ON/OFF indication lamp with toggle switch- Set of 03.
(j) The cost of Grouting of panel including PCC is deemed under respective item .
1
-
-
... More
Earthing complete with GI earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly to ground vertically to a depth not less than 2.25 Mtr below the ground level with top edge of earth plate not less than 1.65 Mtr below normal ground level connected to GI strip 32 x 6 mm size and earthing lead protected with 50 mm dia GI pipe light grade filling around with charcoal dust and salt including excavation, returning, filling of earth and disposal of surplus soil to a distance not exceeding 50 mtr and connected to GI strip by means of GI nuts, bolts and washers strip connected to earth plate including chamber PCC 1 : 3 : 6 type C1. using 20 mm graded stone aggregate in concrete pit pre-cast RCC 40 mm thick reinforced with 6 mm dia round at the rate of 75 mm C/C both way with 12 mm dia mild steel plain bar lifting handle 2 Nos funnel with wire mesh 20 mm dia GI pipe light grade watering pipe and frame work complete all as shown in electrical plate No. 5 of SSR Part - I 1991 including testing complete. (GI strip upto 7.5 m length in included in unit rate quoted by contractor and beyond this lengths the same shall be measured & paid separately.
4
-
-
... More
Supply, Installation, connecting, testing and commissioning split type AC of capacity 2 TR ( 6000K Cal /hr) dual Inverter type 5 Star single phase 230 Volt AC with hermetically sealed rotay type compressure,Air flow not less then 425 CFM,Fan speed in three step,high quality powder coated /high quality paint finish, dust and bacteria filter, wireless remote with LCD display,regregerant as per current industry standard, complete all as specified & comprising of following :- (a) Supply & fixing refrigerant pipe, refrigerant gas, copper tubing for suction & discharge of suitable size duly insulated & protected by suitable size of flexible PVC conduit with control valve & safety accessories all as directed. (b) Supply & fixing wiring for evaporator and condensing unit with suitable size of copper wire in PVC conduit/flexible pipe with fittings.
(c) Refrigerant pipe discharge suction and liquid line copper tubing of suitable size (3/8” & 5/8”) with insulated and properly protected by suitable size of PVC flexible conduit as specified by manufacturer with control valve and safety accessories refrigerant pipe not exceeding 10 metre complete.
35
-
-
... More
(d) Making good the disturbed surface to match the existing surface after plugging the hole etc .
(e) Connection of evaporating and condensing unit with suitable size of copper wire PVC insulated.
(f) Requisite gas for charging alongwith copper tubing and insulating materials. (g) out door unit to be fixed on wall/floor with support of MS stand duly painted on enalmelled paint over a coat of primer. NOTE-Supply and fix copper tubing,connecting cable,outdoor unit bracket,drain pipe with insulation requires apart from standard company packing shall be deemed to be included in unit rate.
-
-
-
... More
Supply, installation, testing and commissioning of 12mm bore of thickness 0.7 mm copper pipe with required copper fitting of seamless dioxidized , non arsenical, half hard lampered and degrees and confirming to EN-13348 std .
380
-
-
... More
Description all as per Srl item No 187 here-in before but 15 mm bore of thickness 0.9 mm, complete all as specified and directed.
380
-
-
... More
Description all as per Srl item No 187 here-in before but 22 mm bore of thickness 0.9 mm, complete all as specified and directed.
120
-
-
... More
Description all as per Srl item No 187 here-in before but 28 mm bore of thickness 0.9 mm, complete all as specified and directed.
80
-
-
... More
Supply, installation, testing and commissioning of 4 Gas digital Alarm system to detect failure/ leakage, complete all as specified and directed.
4
-
-
... More
Oxygen system : Supply, installation, testing and commissioning of semi automatic contro panel with changover to control the supply of oxygen in medical sector , panel should be safe for low voltage operation, suppuorted with audio visual alarm facility , trouble free functionality, sturdy design, dual line pressure regulator along with one high flow regulator etc , inlet valve & outlet valve both of size 28 mm dia and incl NRV 22-28 MM dia, complete all as specified and directed.
1
-
-
... More
Supply, installation, testing and commissioning of oxygen manifold system of 8+8 size comprising of each set high pressure copper pipe and with high pressue copper fitting and NRV made of high quality mtrl. This system willl have Non return of valve for easy change of cyclinder without loss of contintuity of easy supply, complete all as specified and directed.
1
-
-
... More
Supply, installation, testing and commissioning of oxygen manifold system of 4+4 size comprising of each set high pressure copper pipe and with high pressue copper fitting and NRV made of high quality mtrl. This system willl have Non return of valve for easy change of cyclinder without loss of contintuity of easy supply, complete all as specified and directed.
1
-
-
... More
Oxygen system : Supply, installation, testing and commissioning of Oxygen Gas outlets, complete all as specified and directed.
95
-
-
... More
Oxygen system : Supply, installation, testing and commissioning of Back pressure compensated Flow meter with flow range 0-50 litre per mint quality brass body each set with unbreakable Humidifier bottle, complete all as specified and directed.
95
-
-
... More
Supply, installation, testing and commissioning of pro adoptor for oxygen outlets points confirming to HTM 2020/NFPA -99 , complete all as specified and directed.
2
-
-
... More
Supply, installation, testing and commissioning of Vaccum Gas outlets, complete all as specified and directed.
95
-
-
... More
Supply, installation, testing and commissioning of High vaccum ward suction unit with 600 ml bottles, complete all as specified and directed.
95
-
-
... More
Supply, installation, testing and commissioning Emergency isolating Valve of valve brass connector for sizes of pipes 12mm with fitting and related accessories with clamp/clip, complete all as specified and directed.
196
-
-
... More
Description all as per Srl item No 187 here-in before but 15mm with fitting and related accessories with clamp/clip, complete all as specified and directed.
5
-
-
... More
Description all as per Srl item No 187 here-in before but 22mm with fitting and related accessories with clamp/clip, complete all as specified and directed.
5
-
-
... More
Description all as per Srl item No 187 here-in before but 28mm with fitting and related accessories with clamp/clip, complete all as specified and directed.
5
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%