Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date12 Dec 2024
Closing Date18 Jan 2025
Tender Amount₹ 23,85,400
Costs
EMD
₹ 47,708Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_688422_1Bid Award Id
ViewTender No
94162/MRT/2024-25/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
SPL REPAIR NEAR BLDG NO 21A ORS COOK HOUSE PUPSA UNDER GE (NORTH) MEERUT CANTT
BOQ Items
... More
Demolition of cement concrete of ground floor n exc 15 cm in depth in any position nototherwise specifically provided for complete all as specified and directed.
2.5
-
-
... More
Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each & removing from site complete all as specified and directed
10
-
-
... More
Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqn each & removing from site complete all as specified and directed
6
-
-
... More
S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note :- (i) Rates inclusive of M.S. hold fast/ lugs or SS dash fasteners). (ii) For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed.
19.2
-
-
... More
S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note :- (i) Rates inclusive of M.S. hold fast/ lugs or SS dash fasteners. (ii) For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed.
19.2
-
-
... More
M&L factory made gauged shutter shall be made out of U Frame 35x35x5mm and 25x25x5mm and 1.5mm thick, 10mm Square bars grill complete with stainless steel fly proof wire mesh having 0.63mm nominal dia wire and 1.4mm average with aperture including two coats of synthetic enamel paint over a coat of red oxide as shown on drawing all specified and directed by Engr-in -charge.
11.1
-
-
... More
S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. Note:- Stainless steel butt hinges and necessary S S screws shall be paid separately.
11.1
-
-
... More
S&F powder coated anodised aluminium windows sliding type (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 5.50 mm thick black glass complete all as specified and directed.
11.52
-
-
... More
Supply & fix 125mm size aluminium alloy handles cast type anodized complete all as specified & directed.
12
-
-
... More
S&F Mild steel sliding bolt 300mm long plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as specified & directed
6
-
-
... More
S&F mild steel barrel tower bolt stove enameled black with bright bolt 200 mm long.all as specified & directed
6
-
-
... More
M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel (by spraying) all as specified & directed
60
-
-
... More
M&L for fabrication and fixing BWP (Boiling water Proof) solid block Board 19 mm thick conforming to IS 1659- 2004 to be used ,inside depth not less than 0.50 metre. All the exposed surface which are or can be visible to be covered with 1.0 mm th. Sunmica of Approved colour, shade and finish. The surface which will come in contact with wall/ masonary/tiles etc shall be premiered with Appropriate Wood primer mixing Approved Antitermite chemical and pasting 250-micron water proof Plastic Sheet with appropriate adhesive. All the Pastings to be done with water resistant Adhesive. Any Butt joint should be strengthen with Screw and Fissures inserted with appropriate pasting compound. Shutters of storage unit to be formed out of 19 mm thick BWP ply and faced with 1.0 mm thick Sunmica. Provide shelf etc. made of 19 mm thick BWP B.B., polished to engineer-in-charge's approval. Complete Including with all necessary fittings like knobs, magnet catcher, running track for sliding, hinges any type, ball catchers, SS tower bolts 150mm , locks,SS handles 300mm long, adjustable shelves etc. as per directions of Engineer Incharge. Inside surfaces to be finished with 1.00 mm thick Sunmica and outer exposed surface with 1.00 mm th. Sunmica. Cupboard depth of 600- 750 mm complete all as specified and directed. Note:- 1.Rates inclusive of solid block board, adhesives, fittings/fixtures, Sunmica and plastic sheet etc and shall not be paid separately. 2.Front facing area shall only be considered for payment ).
60
-
-
... More
S&F in repair stainless steel piano hinges for cupboards complete all as specified and directed
2
-
-
... More
S&F in repair 150 mm size stainless steel bright finish handle for cabinet shutter complete all as specified and directed
2
-
-
... More
Supply and fix 150mm size mild steel helical door spring including roller and plate fixed with screws to wooden or welded to iron chowkat complete all as specified and directed.
4
-
-
... More
Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc.
100
-
-
... More
M & L 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.
180
-
-
... More
M & L 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth with out using extra cement complete all as specified & directed.
240
-
-
... More
Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises.
160
-
-
... More
M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone agg) for Sub base flooring complete all as specified and directed
200
-
-
... More
M&L 16-18 mm thick machine cut pre-polished kota stone slab flooring, skirting laid and jointed with grey cement slurry mixed with pigment to match the shade of slab over & including 15mm thick screed or bedding in cement mortar 1:6, including grinding, rubbing and polishing complete all as specified and directed.
80
-
-
... More
M&L for non-skid coloured ceramic tiles not less than 7-8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed or bedding layer in cement mortar 1:6, complete all as specified and directed.
Note:- All as per designer concept approved by GE.
10
-
-
... More
M&L for ultra charged vitrified tiles 10-15mm thick (or thickness as specified by manufacture), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exceeding .72 Sqm in flooring set and jointed in premium epoxy grout (Kajaria KE-100 or equivalent) to match the colour of tiles and including bedding of average thickness 6mm thick premium tile adhesive kajaria CX-1 or equivalent for laying of tiles over & including 15 mm thick screed or bedding layer in cement mortar 1:6 on brick/concrete surface complete all as specified and directed. Note:- Rates Inclusive of Premium epoxy grout, premium tile adhesive and shall not be paid separately).
55
-
-
... More
All as per item No 27 above but as in skirting complete all as specified and directed.
1
-
-
... More
M&L for non-skid coloured ceramic tiles not less than 7-8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed or bedding layer in cement mortar 1:6, complete all as specified and directed. (Note:- All as per designer concept approved by GE)
60
-
-
... More
M&L for non-skid coloured ceramic tiles not less than 7 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick screed in cement mortar 1:4, complete all as specified and directed.
(Note:- All as per designer concept approved by GE)
10
-
-
... More
M&L for glazed coloured ceramic tiles joint free size 450x300mm and thickness not less than 7 mm (square/ rectangular) on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick screed in cement mortar 1:4 complete all as specified and directed.
(Note:- All as per designer concept approved by GE)
80
-
-
... More
Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified and directed.
50
-
-
... More
All as per Sl Item No.32 here-in-before but 20 mm bore pipe complete all as specified and directed.
20
-
-
... More
S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore complete all as specified and directed.
50
-
-
... More
All as per item No. 34 above but 20 mm bore pipe complete all as specified and directed.
20
-
-
... More
S&F triple layer 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes and incl dismantling water tanks & removing from site complete all as specified and directed.
3
-
-
... More
S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified and directed.
3
-
-
... More
S&F in repair bib taps brass chromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.
8
-
-
... More
S&F in repair 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union complete all as specified and directed.
8
-
-
... More
Supply & fix in repair PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.
8
-
-
... More
Supply and fix in repair PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 75mm bore as in waste and rain water pipes complete all as specified & directed.
7
-
-
... More
Supply and fix in repair PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 110 mm bore as in waste and rain water pipes complete all as specified & directed.
7
-
-
... More
Supply and fix PVC bends 75mm bore, any radius complete all as specified & directed.
1
-
-
... More
Supply and fix PVC bends 110 mm bore, any radius complete all as specified & directed.
1
-
-
... More
S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 15 mm dia complete all as specified and directed.
2
-
-
... More
S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia complete all as specified and directed.
2
-
-
... More
M&L PCC 1:3:6 type C-0 (using 12.5 mm greded stone agg) for hold fast pressed steel frame etc complete all as specified and directed.
0.1
-
-
... More
Supply and fixing PVC heavy duty waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.
2
-
-
... More
Supply and fix in repair for 2mm thick fiber glass reinforced translucent plain sheet fixed with and incl catch srew and nut bolts as in sun shade chajjas etc fixed in any position and height complete all as specified and directed.
4.32
-
-
... More
Supply and fix in repair Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc complete all as specified and directed.
50
-
-
... More
M&L Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290, Gde E-165 complete all as specified and directed.
80
-
-
... More
Dismantling timber scantlings 40 sq. cm and over in section as in framed work, in any position complete all as specified and directed.
0.5
-
-
... More
S&F rolled mild steel as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, reveting and / or welding or connecting with bolts and nuts (including revets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc, also for wedging, plumbing, truing up and fixing conf to Fe-410-W (Gde-E-250) quality A complete all as specified and directed
1500
-
-
... More
M&L 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggrgate) as in plinth protection, path, sub base etc finished the surface even & fair complete all as specified & directed.
24
-
-
... More
S & F rolled mild steel plates ( plain on chequered) channels, square cut or notched (ordinary and counter sunk) forming holes without any attachment conforming to Fe 410 W (Gde E. 250) quality ‘A’ complete all as specified & directed
80
-
-
... More
Dismantling asbestos cement (Corrugated or Semi corrugated ) sheet including ridge as in roof covering complete all as specified and directed.
300
-
-
... More
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding/ridges to wall, fixed with self tapping screws in ridges as specified
180
-
-
... More
Supply and fix Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of a colour having tensile strength of 550 Mpa as in roof covering/ceiling fixed with including self tapping screws/fasteners as required at site complete all as specified and directed.
120
-
-
... More
S&F Mild steel flat iron as in wind ties including cutting drilling holes and securing bolts confirming to Fe-290 Gde E-165 complete all as specified and directed.
40
-
-
... More
Material & labour for provision of GI frame work (snap grid) suitable for size as in false ceiling of size 605mmx605mm including fixing 4mm thick gypsum board /E-board in ceiling size 60cmx60cm fixed to metallic snap grid consisting of following and all as directed including dismantling wall and ciling boards or insulation boards/slabs any thickness including cover fillets. Note :- (i) GI sections incorporated in frame work shall conform to designation given in IS: 737-1986. (ii) The snap grid shall conist of GI frame work main/cross tee of size 36.5mmx25mmx1.0mm thick and 25mmx25mmx1.00mm respectively. (iii) Snap grid frame shall be fixed to ceiling with supporting hangers consisting of Supply and fix 2mm to 4mm dia mild steel GI wire. (iv) The main and cross tees shall be jointed at junction/crossings with GI frame work angle bracket, of size 15mmx15mmx1.0mm thick, fixed with suitable mild steel, bolts, nuts and washers all as per manufacturer's instructions. (v) The snap grid(main/cross tee section) shall be supported at ends all along the wall with GI frame work angle of size 25mmx25mmx1.00mm anodized thick (vi) Size of the snap grid shall be 605mmx605mm. (vii) Minimum average thickness of anodizing shall be 15 micron. complete all as specified & directed.
50
-
-
... More
S&F in repair 12.5 mm thick tapered edge gypsum moisture resistant board (seamless type) conforming to IS: 2095- Part I. false ceiling at all heights including providing and fixing of framework made of special sections power pressed from MS sheets and galvanized with zinc coating of 120g per sqm ( both sides inclusive) as per IS 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts and bolt of required size and other end of angle hanger fixed with intermediate GI channels 45x15x0.9mm running at the spacing of 1200mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm at 450 mm centre to centre shall be fixed in a direction perpendicular to GI intermediate channel with connecting clips made out of 2.64mm dia x 230 mm long GI wire at every junction including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall / partition with help of rawl plugs at 450 mm centre with 25 mm long dry wall screws at the rate of 230 mm interval including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screw of size 3.5x25 mm at 230 c/c including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compounds in three layers covering up to 150 mm on both sides of joints and including two course of primer & Acryllic Emulsion paint suitable for board all as per manufacturer's specification and also including the cost of making opening for light fitting, grills, diffusers cutout made with frame of perimeter channels suitably fixed, all complete all as specified and directed by Engineer in Charge
55
-
-
... More
S&F in repairs Expanded metal not exc 4 kg, cut to length, bent to shape required and welded to steel frame work supplied and fixed to steel members upto a height of 12mts using necessary safety harness and equipments complete all as specified and directed
80
-
-
... More
Supply & fix galvanized mild steel wire cloth with 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed.
0.5
-
-
... More
Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces using roller for painting complete all as specified and directed.
280
-
-
... More
M & L Preparation of new plastered or old plastered surface of wall by applying 1.00mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over one coat of primer using roller for painting complete all as specified & directed.
260
-
-
... More
M&L for stone slab 20mm-30mm thick stone dressed true and square, in one length not less than 60cm and n. exc 120cm in copings, window cills, chajjas, sunshades, etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directed, set, jointed and pointed in cement mortar 1:4 complete all as specified and directed.
60
-
-
... More
S&F in repair ,PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.
2
-
-
... More
Supply & fix steel windows or ventilators fixed type, complete all as specified & directed.
1
-
-
... More
Supply & fix 3mm thick sheet glass, ordinary quality, and glazing with oil putty/beading in square not exceeding 0.50sqm each pane complete all as specified & directed.
0.5
-
-
... More
M&L for 15-20mm thick black granite stone slab machine cut in cooking platform, jams, pillars, windows cills and the like laid over and including 15mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.
40
-
-
... More
S&F in repair stainless steel sink 1.00 mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets / fixing with RCC plate from connecting union etc. Overall size 495mm x 420 mm with bowl size 410mm x 330mm x 160mm etc complete all as specified and as directed.
1
-
-
... More
S&F in repair stainless steel plate rack of size 750 x 600 mm incl. shelves , rod to put plates etc made out of 0.80mm thick stainless steel sheet after taking down old one complete all as specified and directed.
2
-
-
... More
Demolition of reinforced cement concrete in ground floors and paving not exceeding 15 cm thickness (below or above ground level) reinforced complete all as specified and directed
2.4
-
-
... More
M & L for precast RCC 1:2:4 type B-1(using 20mm graded stone aggregate)for manhole cover, kitchen cooking platforms etc including placing and set in CM 1:6 incl necessary formwork complete all as specified and directed.
2.4
-
-
... More
M & L mild steel deformed or twisted bar(TMT bar)10mm dia and cover cut to length bent to shape reqd, incl, cranking benching spirally for copying for columns hooking ends and bending with and including MS wire annealed wire not less than 0.9 mm dia complete all as specified and directed.
400
-
-
... More
Supply and fixing 06mm thick hollow insulated PVC wall lining consisting of PVC insulated panels having expended polystyrene (EPS) fitting into the wall by using nail etc. complete all as specified and directed.
80
-
-
... More
Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.
95
-
-
... More
Material and Labour for 10mm thick cement paster in CM 1:4 mixed with WPC @ 2 % by weight of cement finised even and smooth without using extra cement on roof surface when concreate is green and wall. Note :- WPC will be measured and paid seperately as supply only rate.
95
-
-
... More
Material & Labour for PCC 1:2:4 type B-O(using 12.5 mm graded stone aggregates) as in roof padding complete all as specified and directed.
4.75
-
-
... More
M & L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified
95
-
-
... More
S&F air vent 600mm dia self driven roof ventilator high performance industrial roof vents made of aluminium alloy, designed to meet wind speed of 200km/hr and to the entry of wind driven rain at a range of 2.5 ltr/sec under cyclone condition. Roof vents to be fixed on standing seam profile with engineering detail to be designed to make total system as leak proof and to the satisfaction of engr-in-charge complete all as specified and directed.
2
-
-
... More
Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.
0.5
-
-
... More
Returing and filling in layers nexc 25 cm incl watering and well ramming complete all as specified and directed.
0.15
-
-
... More
Removal of surplus spoil upto a distance n. exc 50 M & upto height of 1.50 Mtr from starting point complete all as specified and directed.
0.35
-
-
... More
S&F 550 x 405 mm white vitreous china under counter wash basin in the required opening of the Granite/marble stone of Cera make (code no. 1034) or equivalent as approved by GE including 32 mm dia CP Brass waste jali, bottle trap etc of standard pattern, filling of joints between wash basin and the stone etc. complete and as per the direction.
1
-
-
... More
S&F 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair.
1
-
-
... More
S & F in repair 25mm dia Stainless steel decorated curtain rod with braket and ring complete all as specified and directed. Note :- Min 8 rings shall be provided in 1 RM length.
20
-
-
... More
Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.
56
-
-
... More
Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including PVC concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, FRLS unsheathed and connected to common earth and earth duly complete all as specified and directed for the followings :-
-
-
-
... More
One light point controlled by one, one way switch with cables 1.5 sqmm size complete all as specified and directed.
10
-
-
... More
One additional light point on same switch with cables 1.5 sqmm size complete all as specified and directed.
19
-
-
... More
One fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.
7
-
-
... More
One Exaust fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.
4
-
-
... More
One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed.
4
-
-
... More
One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed.
4
-
-
... More
All as per serial item No 89.05 but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board complete all as specified and directed.
4
-
-
... More
All as per serial item No 89.06 but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board complete all as specified and directed
2
-
-
... More
All as per serial item No 89.05 but with 4 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board.
2
-
-
... More
S&F Modular Switch, 1 module, 6A, AC, 240V, one way ISI Marked complete all as specified and directed.
29
-
-
... More
S&F Modular Socket, 2 module, 6A, 2/3 pin combined, AC, 240V, ISI Marked complete all as specified and directed.
8
-
-
... More
S&F Modular Socket, 2 module, 6A / 16A, 2/3 pin combined, AC, 240V, ISI Marked complete all as specified and directed.
8
-
-
... More
S&F Modular Switch, 1 module, 16A, AC, 240V, one way ISI Marked complete all as specified and directed.
8
-
-
... More
Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate complete all as specified and directed.
8
-
-
... More
Supply and fixing LED lamp 15 watt complete all as specified and directed.
8
-
-
... More
Supply and fixing decorative wall mounted LED tube light fitting 20 watt with polycarbonate housing with all accessories and fixing material complete all as specified and directed.
17
-
-
... More
Supply and fixing decorative LED tube light fitting 15 watt wall mounted with extruded polycarbonate ,integrated lamp & driver with opal diffuser and decorative end plates complete with all accessories and fixing material complete all as specified and directed.
2
-
-
... More
Supply and fixing 1X36W/40W LED Building security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including security light brackets of 32 mm dia GI pipe medium grade upto 1.2 mtr long bend to shape at 100-120 degree including flat iron clamps and Suitable nuts and bolts grouted in wall including all material required for fitting all as specified and directed by Engr-in-Charge.
4
-
-
... More
Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed by Engineer -in- Charge.
25
-
-
... More
Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, four single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 6 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed.
49
-
-
... More
Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 6 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed.
49
-
-
... More
Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in -charge.
1
-
-
... More
Supply and fixing MCB, SP, AC, 240 volts "C" series capacity of 06 to 40 Amps, 10kA and making connections complete all as specified & directed.
6
-
-
... More
Supply & fixing MCB, DP (Double Pole), AC, 240 volts, C series capacity 32 Amps to 40 Amps 10kA and making connections complete all as specified & directed.
1
-
-
... More
Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level connected to galvanised strip of size 32 mm x 6 mm as earth lead by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 40 mm dia connected to earting test point , all as shown in elect plate No.5 connected to earting test point all as specified or indicated including testing on completion and including excavation, earth work, PCC earth pit of dimension 550 mm x 550 mm ( outer) and 300 mm x 300 mm ( inner) and 250 mm deep with a 10 mm thick CI cover , hinge to CI frame on ground level GI watering pipe, funnel etc all as specified and directed.
1
-
-
... More
M &L for galvansied strip of size 32 mm x 6 mm as earth lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other in dicated situation for loop earthing etc all as specified and directed.
10
-
-
... More
Supply and fixing fan ceiling complete with Regulator blades, down rods,and accessories ,230V, 1200 mm sweep. Min air delivery 210 CMM with service value 6.00 BEE.Five Star rated with Brushless direct current motor (BLDC) complete all as direced.
7
-
-
... More
supply and fixing Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, RPM 1200, copper winding of sweep 250mm complete all as directed.
2
-
-
... More
S &F in repair metal body heavy duty exaust fan 450 mm sweep, 6000MH, RPM - 14580, bird safety arid/guard, copper winding motor, including making hole in all/window fixing the fan with proper support making surface good as previous suitable electrical connection with 3 core fiexible copper conductor cable of approproate size from ceiling rose/junction box to the fixture complete all as specited and directed.
4
-
-
... More
S&L XLPE insulated armoured heavy duty electric cable with aluminium condurtor 1100 volt grade cross sectional area of 10 sqmm 2 core
60
-
-
... More
Supply fabricate and fix kitchen exhaust chimney hood with made of SS304 SS baffle fiters, oil tray and marine light arrangement of size 15Ft X 2.5 ft hood suitable for fixing exhaust duct.
1
-
-
... More
Supply and fix axial flow fan in exhaust system of chimney of size 2ft dia air flow 6000 CFM, direct drive type aluminium casdted impeller, operating voltage 415V, 50Hz motor capacity not less than 2HP, 4P, RPM less than 1500 along with bird guard and connecting it upto power point/starter with suitable size copper cable
1
-
-
... More
Supply and fix site fabricated rectangular GI ducting of 22 gauge with all necessary hanging arragement
240
-
-
... More
Electric starter DOL type suitable for 2HP motor
1
-
-
... More
Supply and fix Water heater storage type steel body and heating element upto 2KW capacity 25 ltr, BEE 5 stared complete with a rating including providing of hold fast in wall and PVC connection 45 cm long with 15 mm dia brass union at both end heavy duty complete all as specified and derected by Engr-in-charge.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements