Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date7 Jan 2025
Closing Date4 Feb 2025
Tender Amount₹ 1,15,51,000
Costs
EMD
₹ 1,90,510Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_692204_1Tender No
81933/W/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
SPECIAL REPAIR TO BLDG NO P-87 (18 X OR MD ACCN) AT SMS ENCLAVE (NAPIER LINE) 71 FD REGT AT NEW CANTT UNDER GE (WEST) PRAYAGRAJ
BOQ Items
... More
M&L for non skid ceramic colour tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
530
-
-
... More
Description same all as per Item No 4.0 here in above but on vertical surfaces with and including 10mm thick rendering in CM 1:4 , complete all as specified and directed.
110
-
-
... More
Removing of surplus excavated / demolised materilas to a distance n.exc 50m and deposited where directed at a level n. exc 1.5 m above the starting point complete all as specified and directed.
32
-
-
... More
Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrived material upto a distance n.exc 100m complete all as specified and directed.
400
-
-
... More
Taking out mud in roof, any thickness including plastering and leaping where full thickness recoved or only a part there of disposal off rubbish upto a distance n.exc 100m, complete all as specified and directed.
32
-
-
... More
M&L for PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in roof curbing, padding over roof slab complete all as specified and directed.
Note :- Average thickness shall not exceed 40mm complete all as specified and directed.
16
-
-
... More
M&L for rendering 10 mm thick on concrete surface when concrete is green on roof surface in cement mortar 1:4 all as specified and directed.
400
-
-
... More
M&L for normal water proofing treatment on roof slab consisting with following operations:-
(i) Cleaning the surface and make free of dirt. Preparation of surface which includes deep cleaning of surface after the removal of the loose particles on the terrace. Repairing of the surface must be done with epoxy mortar to be done asper manufacturers instruction complete all as specified and as directed . M/s Asian paint limited, Dr. fixit or equivalent as approved by GE. (ii) Providing & laying Damp proof (liquid membrane) on terrace area/ roof area. first self priming coat of Damp proof (in ration 3:1 with water). The layer will be allowed to air cure for 4-6 hours. Second & third coat reinforced elastomeric liquid applied water proofing membrane (i.e without diluation) to be done in an interval of 4-6 hours. The same treatment of damp proof shall be continued to the parapet wall to better envelope the whole area and applied at at coverage of 10 sft/ltr as recommend by manufactures.
(iii) Material and labour 40-60 gsm geotextile cloth between the secong and third coat then the 2nd coat is still wait as per manufacuers instruction complete all as specified & as directed.
400
-
-
... More
Supply only integral water proofing compound (ISI Marked) complete all as specified & as directed.
15
-
-
... More
Taking down chowkat or frames with shutters (without taking off shutters from the frames) area exc1.5 but n. exc 4 Sqm each complete all as specified & as directed.
126
-
-
... More
Taking down chowkat or frames with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each complete all as specified & as directed.
108
-
-
... More
S&F for Solid PVC moulded door frame of size 50mm x 47 mm made out of 5 mm thick single side prelam PVC sheet reinforced with MS square tube complete all as specified and directed.
144
-
-
... More
S&F for factory made Solid PVC moulded door shutters 28 to 30 mm thick (stiles) with 2, raised panel design with 2 mm thick moulded Prelam on front face and 2 mm thick prelam PVC sheet on back side complete all as specified and directed.
60
-
-
... More
S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
90
-
-
... More
Description same all as per Item No 17 herein above but of frame size 50 x 125 mm complete all as specified and directed.
270
-
-
... More
S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.
Note:- stainless steel butt hinges and necessary S S screws shall be paid separately
144
-
-
... More
S&F for 30mm thick factory made wire mesh solid WPC door shutter consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in -charge, manufacturer's specification & drawings.
36
-
-
... More
S&F for UPVC ventiliators made out of UPVC multi-cavity frames sections of 35X116X2.5mm (for double rivet) suitably reinforced and double multi-shutters division are made by using sash mullion having 50X75X2.5mm multi-cavity UPVC section, suitably reinforced with GI and shutters are made out of 60X75X2.5mm UPVC section reinforced and welded in corners with TPE gaskets provision for glass and for air tightt at frames and outer side of shutter with single glaze window shutters using suitable glass bead with perfect hardware like hinges, handles,stays etc complete. with MS grill of 12mm thick round shape are fabricated as per manufacturer and installed in UPVC frame section of 35X35X2mm by drilling and surveying system complete all as specfied and directed.
Note:- Glazed shutters float glass thickness not less than 4.00mm and wiremesss shutter with SS wire mesh 0.36mm dia with aperture 1.4mm shall also be deemed included in quoted rates and no extra payment will be made separately
Make: Fenesta/Winkraft/Yshpoly/Duraplast/Accura(Accucel)
15
-
-
... More
S&F for casement windows with net & grill single or multi shutter turn window are made out of UPVC multi-cavity frames sections of 60X60X2.5mm suitably reinforced and double multi-shutters division are made by using sash million having 50X64X2.5mm multi-cavity UPVC section, suitably reinforced with GI and shutters are made out of 50X85X2.5mm UPVC section reinforced and welded in corners with EDPM gaskets provision for glass and for air tightt at frames and outer side of shutter with single glaze window shutters using suitable glass bead with perfect hardware like hinges, handles,stays etc complete. Mosquito mesh shutter is made out of UPVC extruded section of 61X27X2mm with GI channel of 1.2mm thick, welded in corners. Mosquito net of GI is filled in shutter with proper required accessories like hinges,MS grill of 12mm square MS bar are inserted in main frame & screwed by hidden screwing system with powder coating etc complete all as specified and directed. Note:- glazed shutters float glass thickness not less than 4.00mm and wiremesss shutter with SS wire mesh 0.36mm dia with aperture 1.4mm shall also be deemed included in quoted rates and no extra payment will be made separately.
Make:- Fenesta/Winkraft/Yshpoly/Duraplast/Accura(Accucel)
60
-
-
... More
Providing and fixing factory made uPVC white color Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners complete all as specified and directed. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.]
100
-
-
... More
S&F for MS window guard bars, plain let in and fixed independently in any frames L or T section support for shelves etc., and similar articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed
285
-
-
... More
Supply, Fixed and fabrication in repair cupboard made out of 16 to 18mm thick PVC board plain sheet complete all as specified and directed
120
-
-
... More
Supply, Fixed and fabrication in repair cupboard made out of 16 to 18mm thick PVC board laminated sheet complete all as specified and directed
150
-
-
... More
Supply and fix continues (piano) hinges, mild steel, bright finish width of flap (when open) 30mm complete all as specified and directed.
200
-
-
... More
S&F for magnetic catches with steel body ‘H’ type, fixed to shutter complete all as specified and directed
154
-
-
... More
S&F for 75 mm dia aluminium handle cast type anodised complete all as specified and directed.
108
-
-
... More
S&F for 125 mm dia aluminium handle cast type anodised complete all as specified and directed.
72
-
-
... More
S&F for Brass Locks, cupboard, grade I, size 50mm complete all as specifeid and directed
36
-
-
... More
M&L for plain cement concrete cast in situ 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as in copings ,hold fast,back filling of pressed steel frame and other similar work water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including form work complete all as specified and directed.
2
-
-
... More
S&F for 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed
72
-
-
... More
All as per ser item No 33 herein before but 150 mm long complete all as specified and directed.
108
-
-
... More
S&F for 100mm long Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge , pin anodized complete all as specified and directed.
378
-
-
... More
S&F for extruded SS bow handle, fabricated type, 125mm long with steel screws complete all as specified and directed.
72
-
-
... More
S&F for extruded SS bow handle, fabricated type, anodised 150mm long with steel screws complete all as specified and directed.
180
-
-
... More
S&F for 250mm long SS sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with & including a min of 6 bolts & nuts four on bolt plate & two on staple plate & fixed complete all as specified and directed.
54
-
-
... More
Demolition of brick work built in cement mortar and removing rubbish complete all as specified and directed.
7.3
-
-
... More
M&L for Brick work with fly Ash old size bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.
5
-
-
... More
M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.
20
-
-
... More
Taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and directed.
400
-
-
... More
Taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc.complete all as specified and directed.
40
-
-
... More
M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
200
-
-
... More
Supplying and laying 16mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed.
150
-
-
... More
M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
35
-
-
... More
Description same all as per item no 44 herein before but re-fixing old steel tubing complete all as specified and directed.
50
-
-
... More
Description same all as per item no 46 herein above but refixing old steel tubing complete all as specified and directed.
5
-
-
... More
M&L for Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exc 10cm girth in brick walls complete all as specified and directed.
100
-
-
... More
S&F in repairs long body 15mm bore bib tap, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.
126
-
-
... More
S&F for 15mm Stop valves, fancy type, Brass chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions complete all as specified and directed.
18
-
-
... More
S&F for Brass CP angle/stop valve long body for 15 mm bore pipe with capstan head long screwed shank including CP cover plate fancy type complete all as specified & directed.
90
-
-
... More
S&F in repair vitreous china counter top wash basin, white, oval shape of size 600x400x185mm fixed on granite including cutting for and pinning in ends in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed.
18
-
-
... More
S&F for Brass CP central hole mixer for mixing hot & cold water screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore for WHB complete all as specified & directed.
18
-
-
... More
S&F in repair Brass chromium plated 32mm bore bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed.
18
-
-
... More
S&F for 40mm bore PVC low density (LDPE) pipe of pressure 6kg/Cm2 fixed to wall or laid in floor, complete all as specified & directed.
16
-
-
... More
S&F in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) complete all as specified & directed.
18
-
-
... More
S&F in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified & directed.
18
-
-
... More
S&F in repairs PTMT cabinet mirror of selected quality glass complete all as specified & directed.
18
-
-
... More
S&F in repair CP brass tubular towel rail, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified & directed.
18
-
-
... More
S&F in repair Soap dish,stainless steel, fixed to plugs with chromium plated brass screws complete all as specified and directed
36
-
-
... More
S&F in repair Towel ring Brass chromium plated complete all as specified and directed.
18
-
-
... More
S&F in repair PTMT corner glass self assembly complete all as specified and directed.
18
-
-
... More
S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest complete including p or s trap and provn of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe etc complete all as specified & directed.
18
-
-
... More
S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified & directed.
18
-
-
... More
S&F for PVC connection 450 mm long suitable for 15 mm bore GI pipe including CP brass nuts on both sides, complete all as specified & directed.
54
-
-
... More
Demolition and breaking up or taking down PVC/AC/CI/SSW 100mm/ 75mm bore pipe drain pipes, set in cement mortar including PCC haunching and bedding, complete all as specified & directed.
240
-
-
... More
S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified & directed.
180
-
-
... More
S&F for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified & directed.
60
-
-
... More
S&F for 110mm bore PVC (SWR) bend with oval access door, any radius complete all as specified and directed
8
-
-
... More
S&F for 75mm bore PVC (SWR) bend with oval access door, any radius complete all as specified and directed
8
-
-
... More
S&F for PVC (SWR) junction single (single T), equal or unequal, 75 mm bore, complete all as specified and directed
4
-
-
... More
S&F for PVC (SWR) junction single (single T), equal or unequal, 110 mm bore, complete all as specified and directed
4
-
-
... More
S&F for PVC(SWR) 110mm dia branch piece, single(single Y) equal or enequal complete all as specified and directed
4
-
-
... More
S&F for PVC(SWR) 75mm dia branch piece, single(single Y) equal or enequal complete all as specified and directed
4
-
-
... More
M&L in repair PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified & directed.
4
-
-
... More
S&F for PVC(SWR) 75 mm bore floor trap plan with grating including jointing with solvant cement complete all as specified & as directed.
36
-
-
... More
S&F for 500 ltr capacity rotational moulded polyethene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including tank nipple etc as specified in SSR part-I complete all as specified & directed.
10
-
-
... More
Dismantling PVC water tanks of any description and removing for capacity exceeding 250 litres but not exceeding 500 litres etc complete all as specified & directed.
10
-
-
... More
Disconnecting existing tanks for capacity exceeding 250 litres but not exceeding 500 litres etc, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in same position complete all as specified & directed. Note:- Cleaning repairing, etc. measured separately
8
-
-
... More
S&F for 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified & directed.
18
-
-
... More
S&F for gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore, complete all as specified & as approved by GE/Engineer-in-Charge.
18
-
-
... More
S&F for sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified & directed.
18
-
-
... More
S&F for Stainless steel plate rack (utensil rack) of size (600 mm x 750 mm) and depth 300 mm made with 0.63 mm thick stainless steel sheet provided with brass screw including necessary fittings, nut/bolts complete all as specified & directed.
18
-
-
... More
Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified & directed.
1923
-
-
... More
M&L for rendering 15 mm thick in cement mortar 1:4 on fair face of brick work or concrete surface of walls, finished even & smooth without using extra cement complete all as specified & directed.
800
-
-
... More
M&L for rendering 15 mm thick in cement mortar 1:6 on other than fair face of brick work or stone masonry surface of walls, finished even & smooth without using extra cement, complete all as specified & directed.
823
-
-
... More
M&L for rendering 10 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement, complete all as specified & directed.
300
-
-
... More
M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade over a coat of 1-2 mm thick white wall care putty, complete all as specified & directed.
823
-
-
... More
M&L for complete removal of existing treatment from old plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of 1-2mm thick white wall care putty complete all as specified & directed.
600
-
-
... More
M&L for applying 1-2mm thick white cement based wall care putty external for preparing new plastered un-decorated surfaces of wall and applying two coat of exterior emulsion paint (Apex/Weather coat) white or tinted as approved complete all as specified and directed.
800
-
-
... More
M&L for complete removal of existing treatment from old decorated surfaces of wall including cornices etc by using metal plate,wire brush etc applying 1-2mm thick white cement based wall care putty external for preparing old plastered decorated surfaces of wall and applying two coat of exterior emulsion paint (Apex/Weather coat) white or tinted as approved complete all as specified and directed.
600
-
-
... More
M&L for preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified & directed.
300
-
-
... More
M&L for preparation and complete removal of old decorated plastered surfaces of ceilling and applying two coat of white washing on ceilling complete all as specified and directed by Engineer-in-Charge.
600
-
-
... More
S&F in repair 25mm dia stainless steel , curtain rails/ drapery rod including end brackets and end knobs, stops, rollers complete all as specified and approved by Engineer-in-charge
180
-
-
... More
Demolition of stone slabs and tiles of any description or thickness in floors, laid bedded and pointed in cement mortar aprons etc complete all as specified & directed.
9
-
-
... More
M&L for Marble work Udaipur Green or any approved colour 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade with and including 10mm thick rendering in CM 1:4 complete all as specified and directed by Engr-in-charge.
90
-
-
... More
M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20mm thick screed in CM 1:4 including cutting, polishing, rubbring & moulding of edges including making hole in granite slab for gas pipe complete all as specified & directed.
35.5
-
-
... More
Rounding to edges of stone slabs one edge, such as in steps, cooking plateform and other similar situation complete all as specified & directed.
100
-
-
... More
Supply and applying for component elastomeric acrylic polymer modified cementitious water proofing coating smart care damp block 2K Suprema of asian make in 2 coats over the prepared surfaces (wall/ sunken floors) at a coverage of 1.5 Kg/Sqm. The coating shall have 80% elongation as ASTM D412 resisting 5 Bars hydro static pressure as per D1N 1048 reduction to rapid chlorides shall be 70 as per D1N 1048, crack bridging upto 1.2m as per ASTM 45485. The coating have food grade certificate from laboratories like CFTRI. The max ratio of coating shall be 2 Part of powder & 1 part of liquid within any water addition in the mixing etc complete as per manufacturer specifications. (i) After the surface dried, plaster the surface with CM 1:4, 15mm thick complete all as specified & directed. Note:- All water proofing treatment will be executed by the authoised representative of Asian Paints or as approved by GE.
50
-
-
... More
M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified & directed. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).
70
-
-
... More
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for incl removing rubbish off the premises complete all as specified and directed.
5
-
-
... More
M&L for RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggrigate)as in slab,beam etc complete all as specified & directed.
3
-
-
... More
Use and waste for form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work n.exc 200mm thick complete all as specified & directed.
25
-
-
... More
M&L for Formwork to rough finished surface edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified & directed.
40
-
-
... More
M&L for 8 to 10mm dia and over TMT bars, cut to length, bent ot shape required, including cranking, bending , hooking ends and binding with and including mild steel wire(annealed not less than 0.9mm dia) icluding welding,rivetting etc complete all as specified & directed.
120
-
-
... More
Repairing of RCC projections chajjas, roofs, facia etc by necessary preparation, scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC and providing cement concrete (1:1.5:3) using 12.5 mm graded crushed stone aggregate including necessary form work and reinforced with chicken wire mesh and rendering in cement mortar 1:3 using coarse sand in patches area not exceeding 5 sqm each and thickness of RCC member not exceeding 70mm including applying two coats of finishes as provided to the existing surfaces to match with the existing surfaces in at any height complete all as specified and directed.
10
-
-
... More
M&L for rubber moulded chequered cement concrete coloured tile 30cm X 30cm X 25 mm thick with grey cement and pigment set jointed and pointed in neat cement slurry over and including screed bed or bedding layer 15 mm thick in CM (1:6) in floor all as specified including dismantling of Unsv tile complete all as specified & directed.
200
-
-
... More
M&L for PCC type E2 1:5:10( using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed.
15
-
-
... More
M&L for preparation of new / old surfaces of steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide complete all as specified & directed.
150
-
-
... More
M&L for preparation of new/old surfaces of wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified & directed.
10
-
-
... More
S&F in repair Stainless steel six peg hanger chromium plated as approved by engr-in-charge complete all as specified and directed.
36
-
-
... More
Demolition of cement concrete of any description and in any position not otherwise specifically provided complete all as specified & directed.
2.6
-
-
... More
S&F in repair SS grating 125mm dia withiout waste hole (Minimium weight 40 grams) complete all as specified and directed
36
-
-
... More
S&F in repairs mild steel 300mm, ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed
18
-
-
... More
Supply laying jointing and testing LT XLPE and PVC insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm 4 core complete all as specified and directed.
120
-
-
... More
Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation etc or for shafts, wells,cesspits, man holes, pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5m depth and getting out in any type of soil, complete all as specified.
26.6
-
-
... More
S&F for Steel water tubing 40mm bore medium grade galvanized with all fittings like socket,union elbow ,tees short pieces, connectors, diminishing pieces, caps plug etc jointed and laid in trenches, complete all as specified & directed.
24
-
-
... More
M&L for sand cushioning with a layer of sand 80mm thick before laying of cable and 150mm thick after laying of cable in trenches complete all as specified and directed.
8
-
-
... More
Supply and laying sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid complete all as specified and directed.
0.79
-
-
... More
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm, in any type of soil, complete all as specified and as directed.
15.3
-
-
... More
Removing excavated material (soil) not exceeding 50m and deposition where dircted at a level not exceeding 1.50m above the starting point, complete all as specified and directed.
11.2
-
-
... More
M&L for Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, complete all as specified.
Note:- Rate for earth lead and protection pipe up to 7.5 mtr earth shall be inclussived in the rate of earthing to be quoted by the Contractor.
3
-
-
... More
Supply and fixing in replacement of factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for DPX 160, 4 pole MCCB as incomming and 12 SP MCBs outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB complete all as specified and directed.
Note :- (a) MCBs shall be measured and paid separately.
(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.
3
-
-
... More
S&F in replacement of unserviceable MCCB 100 Amps, 4 Pole, 415 Volts, 50 Hz, 16 KA complete all as specified and directed.
3
-
-
... More
S&F in replacement of sub main wiring with two single core PVC insulated,unsheathed, stranded copper conductor cable 6 Sqmm with 6 Sqmm FRLSH PVC insulated, unsheathed, stranded copper conductor cable as earth wire in existing surface/recessed steel/PVC conduit not less than 20/25mm dia concealed in wall including all conduit and fixing acessories including cutting chases and making good to disturbed surface with cement mortar ration of 1:4 and colour wash complete all as specified & directed. Note: (i) The cost for cutting chases required shall deemed to be included in the quoted unit rate.
(ii) Two run of submain wire, one run of earth wire and one run of PVC conduit shall be measured one RM.
360
-
-
... More
S&F in replacement of factory made, sheet metal enclosure MCB distribution box double door SPN 8 way vertical type for MCBs alonwith provn of MCB as incomer with common bus-bar min 200 Amps rating at incoming end of outgoing MCBs grouted / flush to wall including necessary cutting and making good disturbed surfaces in cement mortar (1:4) and applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and directed. Note: - MCBs shall be measured and paid for separately under respective item of Schedule 'A'.
18
-
-
... More
Supply and fix in replacement MCB SP 6- 32 Amp 240 V AC 10 KA B curve rupturing capacity complete all as specified & directed. Make: Legrand/ABB/Schnider
108
-
-
... More
S&F in replacement MCB SP 40 to 63 Amps, 230 Volts C curve 10 KA, including necessary connection complete all as specified and as directed.
21
-
-
... More
S&F in replacement MCB SPN, 40 to 63 Amps 230 Volts 'B' curve 10 KA, including necessary connection complete all as specified and as directed.
18
-
-
... More
Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.
567
-
-
... More
M&L for Point wiring with 1.5 Sqmm (nominal cross section area) PVC insulated sheathed multistranded copper conductor cable in and including medium grade rigid non metallic PVC concealed conduit in wall after cutting chases in wall including cast iron or pressed steel terminal box covered with and including 3mm thick bakelite sheet top cover fixed flush with wall using brass screws, washers and 1.5 Sqmm single core PVC insulated sheathed copper conductor wire as earth continuity to common earth and connecting to earth dolly for one light/fan/Exhaust fan point controlled by one switch/ 2way bell push or one fan point controlled by one switch through regulator complete all as specified.
327
-
-
... More
Description all as per item No. 132 here in above but for 3 Pin socket outlet 5 Amps point on independent board with PVC insulated copper conductor cable 1.5sqmm complete all as specified and directed.
90
-
-
... More
Description same all as per serial Item No 132 here in above but One 3 pin 5 Amps socket outlet on same board controlled by one, one way 5 Amps piano switch complete all as specified and directed
90
-
-
... More
Description same all as per serial Item No 132 here in above but for one light point controlled by two way switches, with cable 1.5 Sqmm Size complete all as specified and directed
6
-
-
... More
Description same all as per serial item No. 132 but for 5 pin, 15 Amps socket point control by one switch on an independent board with 4 Sqmm size PVC insulated sheathed multi-stranded copper conductor cable and with 4.0 Sqmm PVC insulated sheathed single core copper conductor earth wire complete all as specified and directed.
54
-
-
... More
S&F in repairs Ceiling rose, 3 phase/bakelite 65x50mm two or three therminals complete all as specified.
216
-
-
... More
S&F for angle/batten type holder insulated body with back plate suitable for light point, complete all as specified and directed.
57
-
-
... More
Supply only in replacement of LED 9w inverter bulb B-22 CDL complete all as specified and directed. Make:- Havells Cat part No LHLDEGEDML8O009 or equivalent cat part of make as specified in list of make.
57
-
-
... More
S&F for call bell ding dong type 230 volts AC single pole complete all as specified and directed by Engineer-in-Charge.
18
-
-
... More
S&F modular type white colour switch 6 Amps one way, AC 230 Volts in one module complete all as specified and directed.
507
-
-
... More
S&F modular type white colour shuttered socket 5/6 Amps 3/5 pin combined, 230 Volts in 2 modules all as specified and as directed.
180
-
-
... More
S&F modular type white colour switch 16 Amps one way, AC 230 Volts in one module complete all as specified and directed.
54
-
-
... More
S&F modular socket outlet, multipurpose, 15A /16A, 3/5/6 pin combined 2 module complete all as specified and as directed.
54
-
-
... More
Supply & Fix regulator modular 5 stepped, electronic type one way 220Volt one module complete all as specified.
54
-
-
... More
S&F for Modular switch 2 way 6A, 230V AC 1 module complete all as specified and as directed.
12
-
-
... More
S&F modular bell push piano flush type polycarbonate single pole, 6 Amps 1 module complete all as specified.
18
-
-
... More
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and provide if required down rod as per site requirement and old unsv ceiling fan deposited of MES store yard complete all as specified and as directed.
54
-
-
... More
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep
250mm fixed with necessary fixing arrangment including cutting holes on wall, making of good and finishing of disturbed surface making with existing surface complete all as specified and as directed.
18
-
-
... More
S&F for Exhaust fan AC single phase 230/240 Volt of size 300 mm sweep complete with louvers including making holes and grouting of nut bolts etc and making good the disturbed sufaces of wall all as specified and directed by Engr-in-charge .
18
-
-
... More
S&F for LED tube light batten 20 Watt, 4ft, Polycarbonate housing, translucent diffuser, With LED Light Source, 2200 Lumens, natural White, Surge Protection range- 2KV, Voltage Protection range – 120 -280VAC, 2 years warranty , System efficacy not less than 110Lm/Watt for the fitting, power factor 0.95, total harmonic distortation20%, Colour rendering index 80, Coefficient Colour Temperature – 6500K, Fixed on site with all accessories and connecting up with 2 core flexible copper conductor of suitable size complete all as specified & directed.
81
-
-
... More
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp having minimum 1150 lumen output, wide voltage protection range 140-270 volt AC housed in extruded alluminium housing with high quality polycarbonate diffuser including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & directed.
18
-
-
... More
S&F for Decorative LED fittings wall mounting with LED lamp opal glass shade esthatic look with premium synthatic and metal combination including 10 watt LED bulb including connection and fixing arrangement complete all as specified and directed.
54
-
-
... More
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including bracket for street light made of 40 mm bore GI pipe medium grade not less than 1.2 mtr length at 120 degree to shape fixed on pole/wall with 50x6mm FI clamp, 02 Nos including nut bolts, washer, painting of clamps with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
15
-
-
... More
Taking down carefully sub-main wiring of any size of wire and size with earth wire on wooden batten/ surface conduit/casing caping complete all acessories complete all as specified and directed.
360
-
-
... More
Taking down energy electric meter (KWH) of any type and refixing the same complete all as specified and directed.
18
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%