Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date4 Nov 2024
Closing Date2 Dec 2024
Tender Amount₹ 1,24,00,000
Costs
EMD
₹ 2,48,000Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_682361_1Tender No
CWE/LKO/E/T-76 of 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
M&L for brick work with old size fly ash bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified and directed.
7
-
-
Demolition of Reinforced Cement Concrete works of any description and in any position not otherwise specifically provided complete all as specified and directed.
2
-
-
M & L for RCC 1:2:4 type B-1using 20mm graded stone aggregate as in parapet wall ,cover slab of main holes, drain and similar article with set in cement mortar 1:4 all as specified and directed.
2
-
-
M & L for mild steel TMT bar 10 mm dia and over cut to length bent to shape required including cranking bending and binding with mild steel wire (annealed ) not less than 0.9 dia off confirming to grade Fe 310 complete all as specified and directed.
180
-
-
Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, all as directed.
910
-
-
M & L for rendering 15mm thick in cement mortar 1:6 on stone masonry surfaces or surfaces other than fair face of brick work of walls, finished even & smooth without using extra cement complete all as specified and directed.
390
-
-
M&L for 15mm thick rendering in CM 1:4 with on fair surfaces of walls finished even and smooth without using extra cement complete all as specified.
520
-
-
Complete removing of existing treatment by scrapping with Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and directed.
300
-
-
M & L for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1mm, over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and . Sanding of the putty surface with Wall Sander: L- 01/H-01 or equivalent (having mechanical vacuum mechanism) having RPM not less than 1500, sannding pad of 240 Grit or above having dia of 7"/9" to make the surface free from dust etc. by skilled labour.
Step 1) Mix the putty powder by adding 40-50% water and mix it with Putty mixer(Trucare Putty mixier with min 1400 W power havinng mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute).
Step 2)Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Graco Spray Machine having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041" Step 3) Allow 6-8 hrs time to dry the putty surface.
300
-
-
M&L for one coat of acrylic water based exterior grade primer @0.9 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent quotes as per manufacturer instructions complete all as specified and directed.
300
-
-
M&L for water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up Resistance with low VOC less than 50, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water in 5:2 ratio applied over priming coat with fully automatic airless spray machine of paint application having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint with 8 years performance warranty from Manufacture and instructions complete all as directed.
300
-
-
M & L for providing and applying white wall care putty of 2 mm thickness over plastered surface to prepare the surface even and smooth.
400
-
-
M&L for preparation of old surfaces by complete removal (plastered or unplastered) of walls/ceiling including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying Two coat of acrylic distemper over a 2 mm thick putty and primer complete, all as specified & as directed.
450
-
-
M&L for Preparation of old surface of ceiling and applying one coat of white wash on ceiling all as specified and directed.
10
-
-
M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.
200
-
-
Taking down chowkat or frame with shutters area not exc 1.5 Sqm each (without taking off the shutters from the frame) including irom mongrey and cutting holes for hold fasts & making good complete all as specified.
42
-
-
Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) including iron mongery and cutting holes for hold fasts & making good complete all as specified.
50
-
-
Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws complete all as specified & directed.
5
-
-
S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube etc all as specified and directed. Make: Rajshree/Sintex
5
-
-
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting frame made out of MS tube for top and bottom rail MS frame shall be covered with heat mould plaint colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail lock and bottom rail on either side and as gap insert for top rail and bottom rail plain colour PVC sheet tape fixed in MS frame welding sealed to the style and rail with suitable PVC sheet bearing and jointing together with solvent cement etc complete all as specified and directed.
1.5
-
-
S&F 18 mm thick solid PVC board one side prelaminated decoratiove teak face and other side white and balancing as in kitchen shelf, shutters etc including chawkats and all fitting accessories etc including dismantling complete all as specified and directed
30
-
-
S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open) fixed with CP steel screws complete all as specified and directed.
10
-
-
S & F in repair mild steel helical door spring 150mm ordinary rat tail rod pattern spring including roller and roller plate including welding if required complete all as specified.
6
-
-
S&F in repairs 150mm SS handle
10
-
-
S&F in repairs Ball catches with 150 mm long & 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.
10
-
-
S&F for Pressed steel frames for doors (125 x 60mm) with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete, as specified, supplied and fixed complete all as specified and directed.
30
-
-
S&F 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, on both sides face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.
15
-
-
S&F for 2nd class hard wood 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed
15
-
-
S&F butt hinges of size 100mm medium weight, stainless steel ISI marked complete all as specified.
51
-
-
S&F 200 mm long aluminium anodised barrel tower bolts of extruded section all as specified.
20
-
-
S&F 150 mm size aluminium alloy handles, fabricated type, extruded section.
20
-
-
S&F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified.
6
-
-
M&L for preparation of New surfaces of wood and wood based material of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint of approved tint over a coat of pink primer all as specified & as directed.
80
-
-
S&F powder coated aluminium anodised frame/chowkat of Alu door fixed with rawal plug and screw or wire expansion hold fasteners complete all as specified and directed.
152
-
-
M & L for providing and fixing powder coated aluminium partly glazesd and partly paneled sliding door shutter using 1.50mm thick standered door section having size of styles, top rails 83x44mm where as bottom rails will be made up of 100x44mm including necessary joining cleats glazing clips, rubber packing, anodized aluminium snap beading screws, anodized aluminium fittings such as 100mm long 3 No. aluminium hinges B-21 ,type 01 No. aluminium tower bolt 200mm long and one no mortise lock 100mm size 4 levers (vertical type) and 01 No 300mm size long aluminium sliding bolt and 02 No fancey type fiber glass 150mm dia circular handle shall be provided to each door and glazing of top panel shall be made of 5.50 thick sheet glass and pannelling shall be provided with 12mm thick exterior grade pre laiminated partical board with both side choice laminations, complete all as specified and directed.
35
-
-
M & L for providing & fixing windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy-duty stain less steel pivot hinges shall be provided per shutter. The windows should be panelled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self-expanding, screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work including of all taxes.
42
-
-
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apeerture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
8
-
-
S&F in repair aluminium extruded section body door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.
12
-
-
S&F floor door stopper as in repair of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed.
24
-
-
S&F in repair stainless steel drapery curtain rods standard quality dia not less than 25mm with fancy type stainless steel latoo at both ends and Stainless Steel Bracket for middle support as required all as specified and direced as approved by GE.
170
-
-
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
1517
-
-
M & L for Glazed ceramic tiles in vertical surfaces 600x300x7/600x450x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.
450
-
-
M&L for Non skid ceramic coloured tiles 7 to 8 mm thick(square/ rectanglar) area of each tiles exc 0.06 Sqm but not exc 0.11 Sqm in floor including screed bed 15mm thick or beding layer for laying floor finishes CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
35
-
-
S&F vitrified ceramic tiles dark/light shade digital tiles/(double charged), 10mm thick (square/ rectanglar) polished , exceeding 0.18 sqm of each tiles not exceeding 0.38 sqm, in floors etc. laid over 15mm thick screed bed 1:6 , set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and directed.
847
-
-
All as per above but on vertical surfaces including 10mm thick screed plaser in CM 1:4 complete all as specified. complete all as specified and as directed.
45
-
-
M & L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
20
-
-
M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, all as specified and directed.
1
-
-
Dismantling of stone slabs and tiles of any description or thickness in floors, platform, aprons etc laid bedded and pointed in any mortar
4
-
-
M & L for 20 mm thick granite (of any type and colour ) work (table rubbed and polished ) in steps, Jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of granite complete all as specified.
15
-
-
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations
30
-
-
S&F 5 mm thick hollow PVC Wall panlling including PVC beading at corner and top of any design, fixed on wall as per manufacture instruction complete all as specified and directed.
50
-
-
Dismantling AC sheet (Corrugated, Semi Corrugated etc) as in roofs etc including ridges complete all as specified.
1025
-
-
S&F of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in room covering/cladding to wall, including ridge cover fixed with self tapping screws etc all as specifed.
990
-
-
S&F of pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in room covering/cladding to wall, including ridge cover fixed with self tapping screws etc all as specifed.
95
-
-
Dismantling wrought iron or mild steel work of any description.
10
-
-
M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide/zinc chrome primer complete all as specified.
165
-
-
M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc (Fe 410 -W (Gde E- 250) quality A all as specified & directed.
5450
-
-
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover filltets complete all as specified
480
-
-
S&F for false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) False ceiling tiles of size 595x595mm of approved texture, design and patterns having moisture content less than 2% , humidity S&F for fully perfortated 12mm thick micro tegularedged or 10mm thick squre edged GRG(Glass Fibre Reinforced Gypsum) false ceilijng tiles at all heights with GRC false ceiling tiles of size 595x595 mm of approved texture design and patterns having moisture content less than 2%, humidity resistance of 99% NRC 0.50 to 0.75 as per IS 8225:1987. Noncmbustible as per BS476(para4 )-1970 and light reflectance of 85% ( minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15x32mm of length 1200 mm and 3000 mm, cross-T of size 15x 32 mm of length 1200 mmand secondary intermediate cross-T of size 15x32 mm of length 600 mm to from grid module of size 600x600mm, suspended from ceiling using galvanizedmild steel items (galvanized @ 80 grams per sqm) i.e 50mm long 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level aduster of length and L- shape leveladjuster of size 85x25x2 mm Galvanised iron perimeter wall angle of size 24x24x0.40 of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center and 40mm long dry wall wood screw. The work shall be carried out as per direction of the Engineer-in-Charge
270
-
-
S&F for in repair three layer rotational moulded polyethylene water storage tank cylindrical hoisted & fixed in position incl dismantiling water tank complete all as specifed capacity 1000 ltrs complete all as specified and directed.
1
-
-
S&F in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density Plastic ball Screwed for iron pipe and fixed (Minimum weight -210 gms complete all as specified and directed.
1
-
-
S&F 15 mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including taking down complete all as specified and directed.
20
-
-
S&F 20 mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including taking down complete all as specified and directed.
10
-
-
S&F in repairs vitreous china wash hand basin, white, flat back of size 550x400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified.
3
-
-
S&F in repairs vitreous china wash hand basin, 600x480mm counter top oval shape cascade pattern with pillar tap cast copper alloy ,capstan head CP,PVC connection,CP bottle trap, PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed,complete all as specified.
3
-
-
S&F in repair viterious china coupled WC, (wall hung or floor hung) with coupled closed bowl-WC P or S type with seat cover, hinges accessories set, cistern complete all as specified and directed.
2
-
-
S&F in repairs bevelled edge mirror of selected quality 5mm thick glass mounted on fixed to stainless steel fastener 50mm long spacer/wooden plugs with chromium platated brass screw and cup washers complete all as specified and directed.
5
-
-
S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe complete all as specified and directed.
2
-
-
S&F PVC connection of 15 mm bore 450/600 mm long with brass coupling on both ends of superior quality all as specified.PTMT nuts fixed as in repair complete all as specified and directed.
9
-
-
S&F brass chromium plated single hole basin mixer with hot and cold arrangement, long shank suitable 15mm bore of pipe of approved quality complete all as specified and directed.
5
-
-
S&F C P angle valve for 15 mm bore pipe fixed as in repair complete all as specified and directed.
9
-
-
S&F gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe 20mm bore fixed complete all as specified and directed.
3
-
-
S & F in repair 15mm dia fancy type chromium plated bib taps cast copper alloy with crutch or butterfly handle, scresed down screwed for iron pipe or for brass ferrule and fixed both ends for iron pipe or for unions complete all as specified and directed.
7
-
-
S&F in repairs CP toilet paper holder fixed to wall with chromium plated brass screws of approved quality all as specified.
2
-
-
S&F in repair Hat pegs, solid body,125mm to 175 mm brass fancy type complete all as specified and directed.
5
-
-
S&F CP brass towel rails 20 mm dia and 600 mm long fixed as in repair incl chromium plated brass screw and wooden / cleats complete all as specified and directed.
6
-
-
S&F in repair health faucet for EWC CP hand hold with flexible pipe 1.5m long complete set all as specified.
2
-
-
S&F in repairs 15mm dia CP two way tap consisting angle valve to control water suitable for jet cleaner complete all as specified and directed.
2
-
-
S&F in repairs glass corner shelf assembly consisting of 5.5mm thick sheet glass 250X250mm size fixed with chromium plated brackets as in repairs all as directed.
2
-
-
S&F in repair glass self assembly consisting of 5.5 mm thick glass sheet glass self 12 Cm wide with CP bracket gaurd and railing 60 Cm long all as specified.
2
-
-
S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or wall including down all as specified and directed.
55
-
-
S&F in repair 75mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or in floor/wall all as specified and directed by Engineer-in-charge.
10
-
-
S&F 110mm bore PVC (SWR) bends, any radius.
21
-
-
S&F PVC (SWR) bends any radius of 75 mm dia all as specified.
5
-
-
S&F PVC (SWR) 75mm floor trap, plain with grating including jointing with solvent cement
5
-
-
S&F in repair CP grating with hole doom 125mm dia complete all as specified
8
-
-
S&F in repairs 32mm dia PVC waste pipe approx 900mm long for sink/WHB complete all as specified.
5
-
-
M&L for the points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.
125
-
-
Removing existing roof treatment and preparing surfaces to the entire satisfaction of Engr-in Charge /GE including taking down existing plaster,cleaning of all foreign material such as grass roots dust etc and roughening the concrete surfaces by wire brushes and washing down to remove dust etc . flushing at junction of parapets complete and removing the same to the places complete all as specified and directed.
131
-
-
M&L cement concrete type B-1, 1:2:4 (12.5mm graded aggregate) on roof slab / kerbs all as specified and directed.
7
-
-
Rendering 10mm thick on fair faces of concrete surfaces in cement mortar 1:4, mixed with liquid water proofing compound finished even and smooth without using extra cement . (Liquid water proofing compound to be measured paid separately) complete all as specified and directed.
131
-
-
Supply only Liquid water proofing compound complete all as spesified and directed.
6
-
-
M & L for damp proof ultra is a fiber reinforced elastometric liquid applied waterproofing membrane. It is formulated with PU hybrid poymers and reinforcing acrylic fibers. Upon curing it forms a thik, seamless durable membrane thus offering ultimate waterproofing supplying and applying high perfomance elastomeric waterproofing coating cold applied spray/brus applied, smartcare damp proof ultra liquid membrane with an elongation of min, 400%, solid content of min 55% craclk-bridging Effectively bridges cracks up to 2.5 mm. The System includes application of smart care Damp proof in three coats at 1.25 kg per sqm. with fiver mesh sandwitch between the second and the third coat complete as manfacture specication. The first coat should be 30% water diluted self-priming coat and the second and the third coat should't be diluted complete all as specified and directed.
131
-
-
S&F 12 mm thick toughened glass as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes required and pivot at top fance type glass handle of size not less than 300 mm on both sides of shutter to match with colour of glass shutter top and bottom aluminium rail with suitable locking arrangement and all necessary fitting complete all as specified and directed.
34.5
-
-
Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.
4
-
-
M&L for machine cut kota stone slab flooring 19-20mm thick over cement screed bed 15mm thick in CM 1:6, base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.
180
-
-
M&L Cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass-concrete complete all as specified and directed.
4
-
-
M & l for providing and fixing of E-board 600 x 600 x 4mm thick white prelaminated sett embosed reinforced desigener (lake & HM as approved ceiling board/tiles at all height laid on Armstrong Hot dipped Galvanised imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work will comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plugs, level and justers and screws etc.
130
-
-
S&F for Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified
12
-
-
S&F powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified
10
-
-
S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge
10
-
-
M&L for Preparation of old surface of walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
200
-
-
M&L finishing walls with textured exterior paint of required shade : New/old work (two or more coats applied @ 3.28 ltr/10 Sqm) over and including priming coat of exterior priming applied @ 2.20 Kg/10 Sqm complete all as specified and directed by Engr-in-Charge.
198.5
-
-
M&L 2nd class HW plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads exc 13 & n exc 25 sqcm etc complete all as specified and directed.
1400
-
-
M&L 12 mm thick plywood grade BWR type BB, fixed with screw to timber frame work block board interior grade having both sides commercial faces fixed with screws to timber frame work complete all as specified and directed.
514
-
-
M&L for 4 mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces, fixed with screwds to timber frame work complete all as specified and directed.
514
-
-
M&L PU polish on wooden wall surface/wood based material of any description width of girth including removing/cleaning and prepration of the surface including a coat of wood filler with two or more coats as approved complete all as specified and directed.
514
-
-
M & L 4.8 mm thick sheet glass, ordinary quality in squares exc. 0.5 Sqm in each pane
4
-
-
M&L for Automatic sliding door operator double leaf door, microprocessor control, self learning with automatic reversal on contact with an obstruction Panin closing facility. Door weight (double leaf) max 2x85 Kg. Function programs- Off automatic, permanent open exit only partial opening Basic door parameters adjustable, choce between batteries powered opening or closing in the event of a power faillure (with battery pack option required for both) Manufactured in accordance with german guidelines for power operated windows doors and gates all as specified & as directed.
5.31
-
-
M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement, complete, all as specified.
30
-
-
M & L for applying two coats of plastic emulsion paint over a coat of Birla putty over a coat of primer on new / old plastered surface including preparation all as directed
670
-
-
M & L for applying two coats of plastic emulsion paint on ceiling over a coat of Birla putty over a coat of primer on new / old plastered surface including preparation all as directed
680
-
-
S&F 12mm thick gypsum board raised and sunk incl jointing compound and tape with GI grid 80x26x0.5mm ceiling section at 457mmc/c, 15x45x15x0.9mm intermediate channel at 1220mm c/c, 20x28x30x0.5mm perimeter channel, 25x10x0.5mm ceiling angle at1220mm c/c, 9x10xx28x0.5mm shadow line bead and 2.64mm connecting clip, soffit cleat etc complete all as specified and directed by Engr-in-Charge.
150
-
-
Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed.
865
-
-
M & L for Providing and applying minimum 1mm thick wall care putty over prepared surface to achive the surface even and smooth for painting.
865
-
-
Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm Note- Primer and emmulsion to be carried out through air less spray machine (Mechanical means)
865
-
-
M&L for providing and fixing stainless steel (Grade 304) railing made of hallow tubes, channels , plates etc including welding, grinding buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc of required size onthe top of floor or the side of waist slab with suitable arrangement.
200
-
-
S&F Joist channel, angle or tee sections fixed independently without connecting plates etc (cut to ordinary length i.e withing 20 mm of the length indicated FE 410 W (Gde-E-250) quality-A complete all as specified and directed by Engr-in-Charge.
300
-
-
Taking down toughen glass shutter exc 1.0 sqm but not exc 4.0 sqm each and refixing in in other opening including all fitting etc all as specified and directed.
1
-
-
M&L treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including and driling and plugging 12 mm dia holes with cement mortar 1:2 (1 Cement: 2 coarse sand) to match the existing floors compete all as specified and directed by Engr-in-Charge.
350
-
-
M&L exc 13 & n exc 25 Sq cm bullnosed fillets splayed, chamfered or rounded on one edge or face complete all as specifed and directed by Engr-in-Charge.
289
-
-
M&L 40 mm thick IInd class hard wood plain framed panelled shutters (any number of panels) with panels of tmber flat on both sides (feather edged), wood and fitted to chowkhat completed all as specified and directed by Engr-in-Charge.
2.5
-
-
M&L for 40mm thick PCC 1:2:4, type B1 using 20mm graded crushed stone aggregate as in flooring, finished even and smooth without using extra cement, including damoation complete all as specified & directed.
75
-
-
S&F for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified & directed.
30
-
-
M&L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint etc complete all as specified and directed..
20
-
-
S&F Solid PVC Wall Linning consisting of 5mm thick single side prelam color PVC sheet inclusive of solvent cement and fixing at site on PVC frame and PVC L-beading at top/bottom of wall lining,corner of wall,opening eadge of door & windows matching with panel as per specifications and drawing complete all as specified and as directed.
200
-
-
S&F 5mm thick PVC sheet fillets of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified
900
-
-
Excavation in post holes ( or similar holes) each n.exc 0.50cum and getting out in soft/loose soi, returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm, watering and removing surplus soil to a distance n.exc 50mtr complete all as specified and as directed.
6
-
-
Removing excavated material exc. 1.5 km but n exc. 5 Km and depositing where directed etc complete all as specified and as directed
2
-
-
S&F for removal old painted surface of wooden and fixing of 0.9mm thickness decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified & directed
21.5
-
-
S&F of 85x45mm single rebated factory made 100% solid WPC (Wood Polymer Composit) panasle door frame made from 100% lead free (singal & extruded process) material with density not less than 780 Kg/Cum all as specified and directed.
Make :- Rajshree Plastiwood
10
-
-
S&F of Solid WPC solidplain Flush Door shutter 28-30mm thick, made from Co-Extruded three layer rigid PVC foam sheet (Single Extruded) with density not less than 600 Kg/Cum outer layer (0.8-1mm) thick should be of rigid PVC with density of not less than 1400 Kg/Cum manufactured by an ISO 9001-2015 certified company, Both of surface to be laminated with 0.12mm thick PVC film with suitable adhesive. Door should be Water Proof, Termite Proof, Fire Retradant & having good screw holding capacity.
2.8
-
-
S&F of butt hinges of size 100mm medium weight, cold rolled mild steel ISI marked complete all as specified & directed.
15
-
-
S&F of butt hinges 100mm size extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed, type B-21 complete all as specified & directed.
6
-
-
S&F of 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified & directed.
4
-
-
S&F of 125 mm size aluminium alloy handles, fabricated type, extruded section complete all as specified & directed.
4
-
-
S&F of Mortice lock of brass vertical type, size 100 mm,4levers etc complete all as specified & directed.
5
-
-
S&F of Brass sliding door bolt 300mm long with sand or die-cast brass hasp & staple(bolt type) and fixing bolts and sliding bolt with rolled or drawn brass bolt complete all as specified & directed.
5
-
-
S&F of Brass barrel tower bolts 200mm long with with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified & directed.
10
-
-
S&F of 150mm long extruded brass handles D-Type, fabricated type polished and fixed complete all as specified & directed.
10
-
-
S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic WC seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device, complete all as specified & as directed.
1
-
-
S&F in repair vitreous china squatting pan (Orissa pattern) water closet (white) of size 630x450mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified & directed.
1
-
-
S & F in repair PVC low level flushing cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handleetc complete all as specified & directed
2
-
-
S&F in repairs vitreous china half stal type urinal flat back, size of 465 x 355 x 265mm (minimum) white including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with & including 60 mm long brass screws, pointing around urinal back in cement, with & including PTMT grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia complete all as specified & directed
1
-
-
S&F in repair CP Pillar tap fancy type 15mm dia long body complete all as specified & directed.
1
-
-
S&F in repair hand shower (Health faucet) with 1 Mtr flexible tube with wall hook bracket etc, complete set of superior quality all as specified and directed.
2
-
-
S&F in repair 40mm bore PVC low density (LDPE) pipe of pressure 6kg/Cm2 fixed to wall or laid in floor, complete, all as specified.
40
-
-
M&L double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
2
-
-
S&F in repairs stainless steel Sink made of 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 495mm x 420mm bowl size 410mm x 330mm x 160mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste complete, including taking down old unserviceable sink. complete all as specified & directed.
1
-
-
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
716
-
-
Taking down carefully Ceiling fan/wall fan/Exhaust fan complete and refixing after two coats of enamel paint with spray painting all as specified and directed by Engineer-in-charge.
54
-
-
Taking down carefully submain wirings, cables of any size all as specified and directed by Engineer-in-charge.
2010
-
-
Taking down carefully DBs of any size and make all as specified and directed by Engineer-in-charge.
10
-
-
Material and Labour for point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed multi stranded copper conductor single core cable 1100 volts grade in and including PVC conduit with accessories including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP all as specified and directed.
Note :- Sunken box/cover plate for modular switches, sockets etc will be measured and paid seperately under relevant items and blank plate required if any will be deemed included in the item rate.and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall all as specified.
401
-
-
All as per Item No 157 hereinbefore but for One 5 A socket outlet on independent Board all as specified and directed.
215
-
-
All as per Item No 157 hereinbefore but for One 5 A socket outlet on same Board all as specified and directed.
54
-
-
All as per Item No 157 hereinbefore but point wiring complete with 2.5 sqmm for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.
116
-
-
Supply and fix frame plate with match cover one module plate all as specified and directed.
42
-
-
All as per item No. 161 above but two module all as specified and directed.
12
-
-
All as per item No. 161 above but three module all as specified and directed.
131
-
-
All as per item No. 161above but four module all as specified and directed.
103
-
-
All as per item No. 161 above but six module all as specified and directed.
75
-
-
All as per item No. 161 above but eight module all as specified and directed.
39
-
-
All as per item No. 161 above but twelve module all as specified and directed.
36
-
-
All as per item No. 161 above but eighteen module all as specified and directed.
8
-
-
Supply and fix terminal box suitable one modular plat of size 75X75x50 mm including cutting, grooving and plastering etc. all as specified and directed.
7
-
-
Supply and fix terminal box suitable two modular plat of size 75X75x50 mm including cutting, grooving and plastering etc. all as specified and directed.
12
-
-
All as item No 169 above but three modular plat of size 100X75x50 mm including cutting, grooving and plastering etc. all as specified and directed.
166
-
-
All as item No 169 above but four modular plat of size 128X75x50 mm including cutting, grooving and plastering etc. all as specified and directed.
33
-
-
All as item No 169 above but six modular plate of size 210X75x50 mm including cutting, grooving and plastering etc. all as specified and directed.
75
-
-
All as item No 169 above but eight modular plate of including cutting, grooving and plastering etc. all as specified and directed.
39
-
-
All as item No 169 above but twelve modular plate of including cutting, grooving and plastering etc. all as specified and directed.
42
-
-
All as item No 169 above but Eighteen modular plate of including cutting, grooving and plastering etc. all as specified and directed.
8
-
-
Supply and fix Modular switch one way 6A 230V AC 50 HZ SP one module all as specified.
670
-
-
Supply and fix Modular switch one way 16A 230V AC 50 HZ SP one module all as specified.
116
-
-
Supply and fix Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all as specified.
269
-
-
Supply and fix Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module all as specified. Make: Legrand/Anchor Roma/Havells
114
-
-
Supply and fix Modular Regulator 230V AC 50 HZ SP two module all as specified.
98
-
-
S&F modular bell push single pole 1 module6 Amp, 240 volt all as specified.
4
-
-
S&f call bell , ding dong / musical AC single phase 230 volts all as specified.
4
-
-
S&F Ceiling rose PVC polycarbonate all as specified and directed.
223
-
-
Supply and fix in repair of MCB DB SPN 8 way double door type suitable for TP/FP including necessary dummy plate and necessary civil works all as specified and directed.
36
-
-
Supply and fix in repair of MCB DB TPN 4 way double door type suitable for TP/FP including necessary dummy plate and necessary civil works all as specified and directed.
5
-
-
Supply and fix MCB SP 230V, 6-32 Amps capacity all as specified and directed.
236
-
-
Supply and fix MCB SPN 230V, 32 to 63 Amp capacity all as specified and directed.
32
-
-
Supply and fix MCB TPN 230V, 40 to 100 Amp 415V capacity all as specified and directed.
9
-
-
Supply and fix PVC pipe 80 mm dia for protection of cables all as specified and directed by Eng-in-Charge.
175
-
-
Supply and fixing recess mounting LED light fitting 2'x2' luminaire architectural recessed luminaire with CRCA housing and Molded PC diffuser with an unique angular optics for making the illumination easy on eyes for light comfort in office areas with UGR=19. The luminaire should have a color consistency SDCM 5, CRI 80 and choice of CCT: 5700K. Luminaire shall be designed to emit at least 3000 lumens and an efficacy of atleast 120Lm/W and maximum system wattage of 36 Watt, designed for ambient temp 45 deg C. The metallic electronic driver shall have a power factor 0.95, THD 10%, 4KV internal surge protection and the Ripple factor should be 5% to minimise the Flicker and Stroboscopic effect and Fixture should have an operating voltage range of 140-270VAC incl It should have over voltage protection @320V Cut-off with auto restart features. all as specified and directed by engineer in charge.
61
-
-
Supply and fixing of wall/surface mounted integrated batten LED light luminaire of 4ft length with a system wattage of 20-22W with a nominal system lumen output of 2000-2200 lumens and a minimum system efficacy of 100Lm/W. CCT shall be 6500K and CRI ≥ 80. Housing shall be extruded aluminimum with powder coating & with IP20 protection, The luminaire shall meet IP20 rating with surge protection of 2.5KVA, THD ≤10% and PF ≥ 0.95,
82
-
-
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complet
6
-
-
Supply and fix brass coating fancy wall spot/Display/picture light with adjustable head and colour changing fucntion 12W all as per directed.
8
-
-
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed. Note:- Down rods (if required) of suitable length( 4feet,5 feet or 6 feet) is incl in the item rates and no extra payment will be done to the contractor for the same.
75
-
-
S&F of stationery storage type electric BEE 5 star rated Hot Water Geyser of capacity 25 Litre to operate on 230 volt AC, vertical type, white in colour, working pressure min 0.8 Mpa with glass lined coated tank, magnesium anode, adjustable thermostat, enamel coated incology heating element 2 KW, ABS plastic body,Product warranty-2 Years, Heating element warranty-4 Years, Inner Tank warranty-7 Years, including 4 nos full threaded fastner of size 100 x 10 mm with 2 Nos washer, complete all as specified and directed.
2
-
-
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm
8
-
-
Cutting chases in concrete wall/stone for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 20 cm girth and matching wall color.
205
-
-
Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 2.5 Sqmm drawn through & including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed. Note- Two run of 4 sqmm wire and one run of 2.5 sqmm cable incl 20 mm conduit will be measured as one length.
1500
-
-
Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed. Note- Two run of 6 sqmm wire and one run of 4sqmm cable incl 20 mm conduit will be measured as one length.
1665
-
-
Material and Labour for Submain wiring with 4 runs of FRLS grade PVC copper conductor cable 10 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 25 mm dia with all fittings all as specified and directed. Note- Three run of 10 sqmm wire and one run of 6 sqmm cable incl 20 mm conduit will be measured as one length.
660
-
-
Supply and fixing LED building security light of 35/36W Led Street Light made up of pressure die cast aluminium housing with Polycarbonate cover and unique road optics for better uniformity. The luminaire shall be with higher ingress protection IP66 and impact resistance of IK07. Operating voltage range: 140-270V/50Hz, Lumen efficacy of LED 120Lm/W, CRI≥70, CCT-5700K, & SDCM5. Powered by built-in potted LED driver gives constant light over wide voltage range. Shall have High Voltage cut-off@325V & safety from 440V (P2P) for 8 hours. Surge protection 4 kV, Power factor ≥0.95, THD ≤10 complete including 25x3 mm flat iron with bracket of GI pipe light grade 25 mm dia and length not less than 1.2 mtr end of GI pipe suitable for street light fitting complete all as specified and directed by the Engr-in-Charge.
14
-
-
Supply and fix of lithium based energy efficient integrated all-in-one solar street light of Min 18 Watt plus/minus 2% ( Min 3000 lm) IP-65 &IK-08,pressure die cast, battery capacity min 20Ah@ 12.8V or 256Wh, panel capacity min 60 Wp with duly polyurethane coating (camaflouge colour),encases with monocrystaline solar PV panel of 65-67 WP(170/180 lm/watt) lamp with aluminium reflector for better light distribution CRI70 COLOUR TEMPERATURE 5700-6500K microcontroller basedcharge controller cum driver automatic diming function (first four hour at full brightness and rest of time at lower light level with PIR motion sensor dusk to dawn operation suitable to working temperature -10 to 55 C weight not less than 14-16 kg with adjustable MS clamp suitable for pole wall mounting etc complete as req protection short circuit overload reverse polarity and battery protection firm should provide vital parameter test report from NABL accredited lab and should be made in India with CE and ROHS complaint.
2
-
-
Material and labour Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 connected to earth testing point including necessary excavation, earth work, PCC pit ,RCC cover 1:2:4 B1 with 8 mm dia MS rounds 1.5 kgs, funnel ,watering pipe etc. all specified and directed including testing on completion all as specified and directed.
2
-
-
M&L for LT Panel OUTDOOR TYPE cpri Approved panel IP-54 made with CRCA sheet powder coated finish complete 3.15mm thick outdoor and 2.00mm thick indoor with suitable compartment to fix of following items.
Incoming:- 1. (a) Incoming MCCB, four pole, 415 volts, 200 Amps, 35 KA with adjustable Overload setting Ir = (0.8 to 1.0)xIn - One No. (b) Copper bus bar 300 Amp 4 Nos (c) Indication lamp -03 Nos (d) Amp meter with CT 200/5 aMP Complete with selector switch, (e) Voltmeter with selector switch 2. (a) outgoing MCCB , 63 Amp,25 KA C-Curve - 06 Nos. type thermal magnetic release.
3. Indicator Lamps LED in Red in Red/ Yellow/ Blue colour - One Set of Three.
4. Stand :- Made out of 40x40x5mm thick angle iron frame with fixed in PCC 15cm below ground level and 30 cm above ground level. Note:- Before manufacuring of Panel drawing should be passed through Engineer-in- Charge
2
-
-
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core complete all as specified and directed by Eng-in-Charge.
190
-
-
M &L for Excavation in trenches not exc 1.5 m wide and not exc 1.5m deep for laying of pipe, cable etc and getting out in soft/loose complete all as specified and directed.
80
-
-
M&L for Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and directed.
43
-
-
M &L for Removing surplus excavated material to a distance not exc 50 meter and depositing where directed at level not exc 1.5m above the starting point complete all as specified and directed.
29
-
-
M&L for sand cushioning for protection of cables complete all as specified and directed.
22
-
-
Supplying & laying common bricks sub class B for LT cable for protection of cable complete all as specified and directed.
2.9
-
-
Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20 amps SPN MCB all as specified and directed
42
-
-
Taking down carefully any Light fittings/fixtures any size complete including all (electrical fittings & fixtures etc) all as specified and directed by Engineer-in-charge.
231
-
-
Supply and fixing decorative LED lighting fixture with extruded Al. heat sink, environmental friendly, energy efficient ready to use of size 4' incl 4’ LED tube rod incl electric connection complete all as specified and directed .
15
-
-
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 3 core all as specified and as directed by the Engr-in-Charge.
150
-
-
S&F of exhaust fans single phase 230/240 Volts heavy duty metalicbody of size 300 mm sweep 1400 RPM ISI marked, and making connection with twisted copper flexibelwire 23/0.076 mm all as specified and directed.
1
-
-
Lamp Holder(ISI Marked) PVC/Polycarbonate type with back plate suitable for batten fittings, all as specified and directed.
5
-
-
Supply and fix PVC pipe 25 mm dia for protection of cables all as specified and directed by Eng-in-Charge
100
-
-
Supply and fix TV Socket 1 Module Modular all as specified and directed by Eng-in-Charge
4
-
-
Supply and fix Telephone socket 1 Module Modular all as specified and directed by Eng-in-Charge.
4
-
-
Supply and fixing decorative fancy type LED lighting fixture Single brass made bracket with 140mmX78mm rectangular base,210mm length U Shaped brass arm 60 mm dia gallery with 2 pin brass holder tipped with 125mm length MS Powder coated down pipe ,mounted on MS powder coated plate, frosted glass shade 155mmX129MM FINISH DULL BLACK POWDER COATEDand lacquer coated suitable for 03 to 5 watt LED bulb with required electrical connection all as specified and directed by engineer in charge.
22
-
-
Supply and fix brass coating fancy wall spot/Display/picture light with adjustable head and colour changing fucntion 12W all as per directed.
6
-
-
Supply and fixing recess mounting LED light fitting 1'x1' of 20/25 watt white powder coated CRCA housing with LEDs.,efficacy 100 lumen/watt,CRI80 and pf0.9,surge protection 2.5 KV, Seamless front frame with flat white high transmission acrylic cover and including cutting of 2x2 false ceiling sheet with cutting fitting size all as specified and directed by engineer in charge.
12
-
-
Supply & fix in replacement LED wall/surface mounted down lighter, 6W including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified
24
-
-
Supply and fix of lithium based energy efficient integrated all-in-one solar street light of 32 Watt plus/minus 2% ( Min 3000 lm) IP-65 &IK-08, Aluminium pressure die cast, 0 to 15 degree tilt option, battery capacity min 20Ah@ 12.8V or 256Wh, panel capacity min 60 Wp with duly polyurethane coating (camaflouge colour),encases with monocrystaline solar PV panel of 65-67 WP(170/180 lm/watt) lamp with aluminium reflector for better light distribution CRI70 COLOUR TEMPERATURE 5700-6500K microcontroller basedcharge controller cum driver automatic diming function (first four hour at full brightness and rest of time at lower light level with PIR motion sensor dusk to dawn operation suitable to working temperature -10 to 55 C weight not less than 14-16 kg with adjustable MS clamp suitable for pole wall mounting etc complete as req protection short circuit overload reverse polarity and battery protection firm should provide vital parameter test report from NABL accredited lab and should be made in India with CE and ROHS complaint
9
-
-
Supply and Fix LED Strip light warm white 7 W incl adapter and all other connected items all specified and directed.
150
-
-
Supply and fix in rep[air of MCB DB TPN 8 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed.
2
-
-
Supply and fix in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed and comprising of the following:- (a) MCCB, 125 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. (b) MCB, SP, AC, 240 volt of 06 to 32 Amp, "C" curve, 10 KA breaking capacity - 12 Nos.
1
-
-
Supply and fixing Mainlead 2.5sqmm 3 core PVC insulated copper wire drawn through & including PVC Conduit pipe 15/20 mm dia with all fittings all as specified and directed.
150
-
-
Supply and fixing of wall fan of 400 mm sweep, 220 - 240 volts, AC, 50 Hz 1330 RPM, 55 Watts power input, air delivery 65 Cum/min with all accessories complete all as directed by Engineer - in - charge.
18
-
-
Supply and fixing Anthracite COB garden LED Spike light 7W, base colour antracite, made up of aluminium die cast, IP-65 rating surge protection up to 4 kv easy to install on toughned glass/surface , adjustable upto 180 degree CRI80 PF0.9 all as specified and directed.
22
-
-
Supply and fixing LED RGB light 50W made up of aluminium pressure die cast , IP-65,IK-07 surge protection up to 4 kv easy to install on toughned glass , adjustable upto 180 degree CRI80 PF0.9 complete all as specified and directed.
15
-
-
Supply and fixing PVC trunking 54x105 mm size for cable tray riser to DB and DB to sub DB for sub main wiring including making good to disturbed wall surfaces complete all as specified and directed. (Note Accessories such as elbow , bend tee , socket, junctions and flexible cover will be measured and paid seperately 'Only').
60
-
-
Material and labour Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 connected to earth testing point including necessary excavation, earth work, PCC pit ,RCC cover 1:2:4 B1 with 8 mm dia MS rounds 1.5 kgs, funnel ,watering pipe etc. all specified and directed including testing on completion.
5
-
-
S&F in replacement decorative wall mounted fancy light fitting made up of brass rubi lamp brand Single handed including of bulb of 9-15 watts covered by glass complete all as specified.
4
-
-
Supply and fixing ceiling/recess mounted down ligjhter 12W all as specified and directed by Eng-in-Charge.
12
-
-
M&L for cutting holes in wall for fixing of Exfan any type and size and making good of the disturbed surfaces ,matching with colour of wall complete all as specified and directed.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%