Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date6 Nov 2024
Closing Date19 Dec 2024
Tender Amount₹ 1,08,10,600
Costs
EMD
₹ 1,83,110Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_682660_1Tender No
94092/MRT/2024-25/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
ADDITIONAL/ALTERATIONS OF BUILDING NO P-159 THE MALL ROAD UNDER GE (NORTH) MEERUT CANTT
BOQ Items
... More
Demolition of cement concrete of ground floor not exc 15 cm in depth in any position nototherwise specifically provided for complete all as specified & directed.
31.6
-
-
... More
Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified & directed.
623.17
-
-
... More
M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) 25 mm thick for Sub base flooring complete all as specified & directed.
255
-
-
... More
S&F non skid coloured ceramic tiles coloured of 7 to 8 mm (squre/ rectungular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry and pointed with white or coloured cement over 15mm screed bed in CM 1:6 complete all as specified and directed.
50
-
-
... More
All as per item No 7.00 above but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
2
-
-
... More
S&F Coloured Glazed colour ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM (1:4) joint free with grout of matching shade complete all as specified & directed.
45
-
-
... More
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortar etc complete all as specified & directed.
3.2
-
-
... More
M&L for 18-20mm thick black granite stone slab machine cut in cooking platform, jams, pillars, windows cills and the like laid over and including 15mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.
40
-
-
... More
Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each.
22
-
-
... More
Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & not exc 4 Sqm each complete all as specified & directed.
32
-
-
... More
S&F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed.
10
-
-
... More
S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed.
24.5
-
-
... More
S&F 35mm thick 1st class hard wood (teak) Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitred beads for securing glass, etc. sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats completed all as specified and directed
16.3
-
-
... More
S&F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
11.5
-
-
... More
S&F powder coated approved colour anodised aluminium windows sliding type (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 5.50 mm thick plain glass complete all as specified and directed.
8
-
-
... More
M&L Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290 Gde E-165, complete all as specified and directed.
265
-
-
... More
M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel (by spraying) over one coat of primer complete all as specified and directed.
106
-
-
... More
S&F for 125mm Extruded brass handles ISI Marked fabricated type polished complete all as specified and directed.
76
-
-
... More
Supply & fix 150mm size extruded brass handles, ISI Marked fabricated type polished complete all as specified & directed.
56
-
-
... More
S&F Brass barrel tower bolt 200 mm, extruded section ISI Marked complete all as specified and directed.
28
-
-
... More
S&F Brass ISI Marked sliding bolt 300 long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified & directed.
21
-
-
... More
S&F, in repair, aluminium (Die cast) body, Door closer, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed.
28
-
-
... More
S&F 100mm butt hinges, medium weight Brass ISI Marked complete all as specified and directed.
160
-
-
... More
S&F 1.00 mm thick mild steel, plain, black sheet in hearths; covering to Manhole cover covering to door chowkats (frames); chullah hoods; water tanks; water troughs: ducts; urinal trought and funnels etc cut to size edges beads, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/ riveted seanes including bending turning up mitred engles, stopped ends, outlets, etc. as required complete all as specified and directed.
2
-
-
... More
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.
190
-
-
... More
S&Fin repair 5mm thick PVC Sheet wall Panelling (sand wiched between the longitudinal grid in PVC Sheet) any pattern fixing at site with PVC beading/fillet complete all as specified and directed.
190
-
-
... More
S&F Dholpur stone jali any colour 20-25mm thick (measured solid), including all mouldings and including frame (stone frame as per site requirement) complete all as specified and directed.
240
-
-
... More
M&L for stone slab 30mm thick stone dressed true and square, in one length not less than 60cm and not exc 120cm in copings, window cills, chajjas, sunshades, etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directed, set, jointed and pointed in cement mortar 1:4 complete all as specified and directed.
186
-
-
... More
S&F mild steel 150mm size helical door spring including roller and roller plate fixed with screws to wooden chowkat or welded to steel frame, complete all specified and as directed.
7
-
-
... More
Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all specified and as directed.
1030
-
-
... More
M&L 15 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.
195
-
-
... More
M&L Rendering 5mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3) complete all specified and as directed.
185
-
-
... More
Preparation of old surface after complete removal of existing treatment by mechanical means complete all as specified and directed
245
-
-
... More
M&L for applying 2mm thick wall care putty making smooth surface complete all as specified and directed.
850
-
-
... More
Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces using roller for painting complete all as specified and directed.
1101
-
-
... More
Demolition of reinforced concrete of any description and any poisition not otherwise specifically provide (reinforcement cut to faciliatate demolition) complete all as specified and directed.
7.5
-
-
... More
M&L for RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) for columns, pillars, piers, posts and struts covers complete all as specified and directed.
2
-
-
... More
M&L Form work to sides and soffits of beams lintels etc finished rough complete all as specified and directed.
10
-
-
... More
M&L RCC 1:2:4 Type B1 using 20 mm graded stone aggregate as in beams, lintels over 1.5 m span etc complete all as specified and directed.
2.5
-
-
... More
S&F mild steel TMT bars No 500D 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed.
710
-
-
... More
All as per item No 42 but 6 to 8 mm dia complete all as specified and directed.
70
-
-
... More
Taking up or down steel tubing and connection 20 mm bore pipe and removing from site.
84
-
-
... More
All as per Sl Item No.44 here-in-before but 25 mm bore pipe complete all as specified and directed.
72
-
-
... More
Supplying and laying of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed.
84
-
-
... More
Supplying and laying of CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed.
72
-
-
... More
Dismantling OH water tank of capacity exc 250 ltr but not exceeding 500 ltr and removing from site complete.
3
-
-
... More
S&F triple layer white color 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes complete all as specified.
3
-
-
... More
S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete.
8
-
-
... More
S&F 150mm long in floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
35
-
-
... More
S&F in repair, PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.
12
-
-
... More
S&F in repair, PVC(SWR) gully trap, 125/110mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.
10
-
-
... More
S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
1
-
-
... More
S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.
10
-
-
... More
Supply and fix in repairs 75mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste complete all as specified & directed.
70
-
-
... More
Supply and fix in repais 110mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste and rain water pipes complete all as specified & directed.
66
-
-
... More
Supply and fix PVC bends 75mm bore, any radius complete all as specified & directed.
16
-
-
... More
Supply and fix PVC bends 110 mm bore, any radius complete all as specified & directed.
16
-
-
... More
S&F 110mm PVC (SWR) vent cowl complete all as specified and directed.
6
-
-
... More
S&F 110 PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
6
-
-
... More
S&F 110mm PVC (SWR) 'S' trap complete all as specified and directed.
6
-
-
... More
S&F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.
33
-
-
... More
S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia fixed in repair) complete all as specified and directed.
7
-
-
... More
S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 25 mm dia.fixed in repair) complete all as specified and directed.
7
-
-
... More
S&F 25mm dia Stainless steel decorated curtain rod with braket and ring complete all as specified and directed.
Note:- Minimum 10 rings is to be provided of every RM length of curtain rod.
124
-
-
... More
Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.
550
-
-
... More
Material and Labour for 10mm thick cement paster in CM 1:4 mixed with WPC finised even and smooth without using extra cement on roof surface when concreate is green and wall complete all as specified and directed.
Note :- WPC shall be mixed as per manifacturers instructions.
WPC shall be measured & paid separately as supply only.
580
-
-
... More
Supply only liquid water proofing compound complete all as specified and directed.
72.49
-
-
... More
M&L repair to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered above 3.5m and upto 7m from FFL of Ground Floor.) (Note : Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance after binding of reinforcement for measurement otherwise no payment will be considered on this account) complete all as specified and directed.
15
-
-
... More
M&L for PCC 1:3:6 type C1 using 20mm graded stone aggragate as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and throating making grovves for fixing of man hole cover including necessary form work complete all as specified and directed.
21.5
-
-
... More
M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings over 15mm thick rendering CM 1:4 complete all as specified and directed.
45
-
-
... More
M&L for repairing existing RCC structure work by gunting to damaged edge bottom of beam , chajja, slab 40 to 60mm thick and part of RCC member in CM 1:3 & depositing material/ mortar with spray gun under a pressure of 20 to 30 N/CM2 including scafolding and welding wire mess 2 mm dia and size of wiremesh 50mm X 50 mm including cutting welding and placeing position complete all as specified and directed.
17
-
-
... More
M&L for Screed bed or bedding layer of mortar 20 mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.
526.42
-
-
... More
M&L for rendering 10 mm thick in CM 1:4 for fixing of wall tiles/marble dados finishes complete all as specified and directed.
367.12
-
-
... More
M&L for ultra charged vitrified tiles 10-15mm thick (or thickness as specified by manufacture), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm (including 2400mmx800mm size) but not exceeding 2 Sqm in flooring set and jointed in premium epoxy grout (Kajaria KE-100 or equivalent) to match the colour of tiles and including bedding of average thickness 6mm thick premium tile adhesive kajaria CX-1 or equivalent for laying of tiles on brick/concrete surface complete all as specified and directed. (Note: Rates Inclusive of Premium epoxy grout, premium tile adhesive and shall not be paid separately). Make:- Kajaria, Somany, Johnson
223.81
-
-
... More
All as per item No 76.00 above but as in skirting complete all as specified and directed.
Make:- Kajaria, Somany, Johnson
24.62
-
-
... More
M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour cemnt to match including 15 mm thick screed bed in cm 1:6 complete all as specified and directed.
4
-
-
... More
M&L for Ceramic glazed wall tiles including designer/digital/HD/Polished tiles (thickness as specified by the manufacturer), area of each tiles exceeding 0.18 Sqm but not exceeding 0.72 Sqm in flooring set and jointed in premium epoxy grout (Kajaria KE-100 or equivalent) to match the colour of tiles and including laying over cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness bedding on brick/concrete surfaces complete all as specified and directed. (Note: Rates Inclusive of Premium epoxy grout, premium tile adhesive and shall not be paid separately).
232.5
-
-
... More
S&F premium range anti skid matt finish premium range vitrified tiles (as approved by GE) area of each tiles exceeding 0.16 Sqm but not exceeding 0.36 Sqm (thickness as specified by the manufacturer) in flooring set and jointed in premium epoxy grout (Kajaria KE-100 or equivalent) to match the colour of tiles and including laying over cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness bedding on brick/concrete surfaces complete all as specified and directed. (Note: Rates Inclusive of Premium epoxy grout, premium tile adhesive and shall not be paid separately).
Make:- Kajaria, Somany, Johnson
41.24
-
-
... More
M&L Marble stone slab work exc 1.2sqm n.exc 2sqm (Makrana white/ Abu plain/ Makrana doogri/ Makrana Adanga as approved by GE) 18 to 20mm thick (table rubbed and polished) in floors, dados, steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade etc complete all as specified and directed.
2
-
-
... More
M&L Marble work Green Marble 18 to 20mm thick (table rubbed and polished) in floor, steps, jambs, dados, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade etc complete all as specified and directed.
25
-
-
... More
M&L for Mirror polishing on existing marble work/Granite work/stone work as in floors where ever required to give high gloss finish complete all as specified and directed.
100
-
-
... More
M&L machine cut, mirror/ eggshell polished, 18 mm thick Italian Marble stone slab Perlato, Rosso verona, Fire Red or Dark Emperadore etc. stone work for making required design and pattern whether linear or curvilinear wherever required exc 10cm and not exc 20cm (in wall/floor), stones of different finished surface texture, laid and jointed with white cement slurry @ 3.3 kg/sqm including using adhesive for fixing, pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. complete all as specified and directed.
50
-
-
... More
S&F bold metallic stainless steel letters or alphabetes made out of 22 Guage thick Stainless steel plain sheet of grade 304 plain sheet of suitable with not less than 50mm and depth/thick not less than 20mm based on height of letter (hollow section made to shape by using computerised cutting), height of letter not less than 15 inch in Hindi and English languages and fixed on granite/tiled/stone wall cladding finished wall elevated from surface complete all as specified and as directed.
11
-
-
... More
S&F wall to wall mirror of 5.5mm - 6.0mm thick fixed over plywood of 6mm thickness complete with hard board ground fixing with rawl plug and fasteners of approved design with CP brass screw and washers i/c rubber wood moulded beading all round mirror etc. complete all as specified and directed.
20.31
-
-
... More
S&F in 10mm thick toughned glass as in fixed glass, hinged doors, partitions, automatic doors, windows and similar work including cutting to shape, drilling holes, including single leg spider, ceiling/bottom to glass connector and pivots, glass to glass connector, stabilizer rod, floor clamp, plastic parts, wall to glass hinge, knob, roller, floorspring (With S.S. Cover), C Shape Square SS Handle - 450mm etc. all fittings for doors/partitions (including SS fittings) required to make functional all as specified and directed
65.7
-
-
... More
S&F 10-12mm thick (Clear/ Frosted Acid wash) toughened Polish glass (meeting IS 2553 part 1 and EN-12150-1:2015) as in Frameless glass shower cubicles/partitions with Wall to wall enclosure with one end fixed glass and openable hinged/sliding door fixed with wall Coloured/transparent finished Edges (As approved by GE) including Brass hardware, door stoppers, wall to glass hinge, glass to glass hinge, wall to glass connector, floor clamp, stabilizer rod, knob, plastic parts, roller (soft close), floor guide, handles, wall brackets, floor bracket, top/bottom sliding track, L-clamps, profile strips with chrome finish and mirror finish stabilizer bar & rust Free Screws to make functional complete all as specified and directed.
30
-
-
... More
S&F Factory made solid wire gauzed PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing wire gauzed i.e. panel will be of wire gauze in lieu of single side prelam PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly → supplied and fitted to chowkats complete all as specified.
3.31
-
-
... More
M&L for 1st class teak hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed including holdfast as approved by GE complete all as specified and directed.
0.63
-
-
... More
M&L for 35mm thick 1st class teak hard wood heritage wood work shutter designer pattern (panelled/ plain) design pattern as approved by GE) including fixing to frame complete all as specified and directed.
42.5
-
-
... More
S&F 30mm thick 1st class teak hard wood windows, ventilators, etc. to be provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b), open rebated and prepared to receive glass, gauze, etc. (without sash bars), divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats complete all as specified and directed.
73.84
-
-
... More
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
22
-
-
... More
S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.
22
-
-
... More
M&L 2nd class hardwood designer fillets, square, rectangular or triangular in section, sectional area exceeding 13 Sq.cm and not exceeding 25 Sqcm clean sawn, secured with screw complete all as specified and directed.
10
-
-
... More
M&L 2nd class hardwood designer fillets, square, rectangular or triangular in section, sectional area exceeding 6 and not exceeding 13 Sqcm clean sawn, secured with screw complete all as specified and directed.
100
-
-
... More
M&L high gloss melamine polishing on wood work (One or more Coat) over a under Coat of French Spirit polishing (two or more coat) new work including a coat of wood filler complete all as specified and directed.
275.76
-
-
... More
S&F powder coated approved colour anodised aluminium partition with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl fixed with, clips, frame, necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame with one or more rebates including S&F 5.50 mm thick plain/tinted glass complete all as specified and directed.
4
-
-
... More
S&F stainless steel sliding bolt 300mm long bolt type with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as specified & directed
7
-
-
... More
S&F stainless steel heavy weight butt hinges 100mm in size complete all as specified and directed.
27
-
-
... More
S&F aluminium anodised barrel tower bolt with bright bolt 200mm long complete all as specified and directed.
11
-
-
... More
S&F aluminium anodised handles cast type anodized complete all as specified & directed.
18
-
-
... More
S&F Brass barrel tower bolt 150 mm, extruded section ISI Marked complete all as specified & directed
76
-
-
... More
M&L for fabrication and fixing BWP (Boiling water Proof) solid block Board 19 mm thick conforming to IS 1659- 2004 to be used ,inside depth not less than 0.50 metre. All the exposed surface which are or can be visible to be covered with 1.0 mm th. Sunmica of Approved colour, shade and finish. The surface which will come in contact with wall/ masonary/tiles etc shall be premiered with Appropriate Wood primer mixing Approved Antitermite chemical and pasting 250-micron water proof Plastic Sheet with appropriate adhesive. All the Pastings to be done with water resistant Adhesive. Any Butt joint should be strengthen with Screw and Fissures inserted with appropriate pasting compound. Shutters of storage unit to be formed out of 19 mm thick BWP ply and faced with 1.0 mm thick Sunmica. Provide shelf etc. made of 19 mm thick BWP B.B., polished to engineer-in-charge's approval. Complete Including with all necessary fittings like knobs, magnet catcher, running track for sliding, hinges any type, ball catchers, SS tower bolts 150mm , locks,SS handles 300mm long, adjustable shelves etc. complete all as specified and directed. Inside surfaces to be finished with 1.00 mm thick Sunmica and outer exposed surface with 1.00 mm th. Sunmica. Cupboard depth of 600-750 mm. (Note: 1.Rates inclusive of solid block board, adhesives, fittings/fixtures, Sunmica and plastic sheet etc and shall not be paid separately. 2.Front facing area shall only be considered for payment ).
65
-
-
... More
S&F Mortise lock with set with Pair of 8100 Mortise Lever Handles, 271a lock with 55mm backset and 60mm EPC with one side thumb turn and one side key, Fire resistance BSEN 1634:1:2000 Certified Satin Finish Mortise Lock body approximate size of back set 45 mm X 85 mm, with 52 mm Lock and 26 mm brass latch, Stainless steel main & Strike plate & including back to back fixing feature suitable for minimum door thickness 30 mm Single door shutter with necessary fixings, screw as required to complete the work all as specified & directed.
14
-
-
... More
S&F in repair 4mm thick golden inlay decorative high grade PVC panels of size 2400mm X 600mm with PVC beading/fillet complete all as specified and directed. (Make: allure from EUROPRATIK or equivalent as approved by GE)
18
-
-
... More
M&L for applying 15 mm thick rendering in CM 1:4 on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @ 200ml per cement bag or as per manufacturer instructions, complete all as specified and directed. Note:- Water proofing compound shall be measured and paid sepratly
1494.75
-
-
... More
M&L for preparation of old/new surfaces of ceiling and applying two coat of distemper oil emulsion incl priming the surface and incl 1 coat ceiling birla white putty complete all as specified and directed.
250
-
-
... More
M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and minor crackes with wall putty and applying two coats of JK/ Birla wall putty & making the surfaces abosolutely smooth of uniform thickness and after prepration of surfaces, again applying a coat of JK/ Birla wall putty over & including a coat of cement primer and again smoothing the same with sand paper and after prepared smooth surfaces, finally treating the surfaces with three coats of Asian Royal play metallic texture paint (first two coat as base coat & third coat as spray coat of approved colours) for texture finish surfaces complete all as specified and directed.
450
-
-
... More
M&L for premium quality wallpaper of Nilaya Asian paint, Marshall's wallcovering, D'decor, Elementto or equivalent fixed with adhesive over the finished wall surfaces in required colour/shade complete all as specified and directed. (Note: Rates inclusive of adhesive)
220
-
-
... More
S&F triple layer white color 1000 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes and including Dismantling OH water tank of capacity exc 500 ltr but not exceeding 1000 ltr and removing from site complete all as specified and directed.
5
-
-
... More
S&F in repair bib taps brass chromium plated 15 mm bore size with flange screwed down screwed for 20 mm dia pipe or for brass ferrule complete all as specified and directed. Make:- Jaquar OPP-CHR-15037PM or equivalent as approved by GE.
9
-
-
... More
S&F in repair 15 mm dia angle cock cast copper alloy chromium plated with flange screwed down high pressure with crutch or butterfly handle, flench screwed both ends for 20mm dia pipe or for union complete all as specified and directed. Make:- Jaquar ARI-CHR-39053 or equivalent as approved by GE
24
-
-
... More
S&F in repair rimless blind installation wall hung WC with including UF soft close slim seat cover, hinges, accessories set (size 380x520x365mm) including replacement of trap as per manufacturer instuctions complete all as specified and directed. Make:- Jaquar ACS-WHT-87953BIUFSM Or equivalent as approved by GE)
2
-
-
... More
S&F in repair Single Piece Concealed Cistern Body (Front or Top Actuation) with Floor Mounting Frame, Installation Kit and “P-Type” Drain Pipe Connection Set for Wall Hung WC with Flush Control Plate Exposed Part Kit of i Flush 32mm with Dual Flush Push Button Actuation & control stop cock (Suitable for Item concealed cistern body) as per manufacturer instuctions complete all as specified and directed. Make:- Jaquar or equivalent as approved by GE)
2
-
-
... More
S&F in repair Single Piece WC With PP Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, Size: 360x640x685 mm including replacement of S Trap- 110 mm complete all as specified and directed. Make:- Jaquar SLS-WHT-6851S110PP or equivalent as approved by GE)
4
-
-
... More
S&F in repair vitreous china thin Rim Table Top Basin (colour as approved by GE), Size: 530x420x140 mm, Shape - Rectangular including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling, waste pipe, bottle trap and fixing to vanity unit complete all as specified and directed.
3
-
-
... More
S&F at site and on position floor mounted vanity counter made of Superior Material Quality with HDHMR (High Density High Moisture Resistant) of size 770x451x680mm/800x470x680mm having vitreous china basin on top with SS cabinet & side cabinet and soft close door & drawers of approved pattern and design with necessary fixing arrangment complete all as specified and directed. (Note: wash basin to be paid separately)
4
-
-
... More
S&F in repairs Vitreous China Thin Rim Table Top Basin Shape -Round, Size - 360 x 360 x 120mm including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling, waste pipe, bottle trap and fixing to vanity unit complete all as specified. Make:- Jaquar Cat Part No SLS-WHT-6905 or equivalent approved by GE.
1
-
-
... More
S&F in repairs Vitreous China Wall Hung Basin With Fixing Accessories, Size: 610x465x275 mm including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling, waste pipe, bottle trap and fixing to vanity unit complete all as specified. Make- Jaquar QPS-WHT-7303PM Full Pedestal For QPS-WHT-7803PM or equivalent)
2
-
-
... More
S&F 600mm Long Braided Hose with M10 x 1 Nipple, 15mm Nuts, O-Ring & Rubber Washers. Make:- Jaquar Cat Part No ALD-CHR-801B or equivalent approved by GE.
24
-
-
... More
S&F Maze Overhead Shower 300 x 300mm Square Shape Single Flow Body & Face plate Stainless Steel with Chrome Finish with Rubit Cleaning System with CP shower arm 24inches. Make : Jaquar Cat Part No OHS-CHR-1639 or equivalent approved by GE.
7
-
-
... More
S&F in repair CP Soap Dish Holder. Make : Jaquar Cat Part No AQN-CHR-7731 or equivalent approved by GE.
7
-
-
... More
S&F 550mm X 750mm LED Lighting frameless, round/rectangle of required size, Anti-Fog, wall mounted backlit mirror thickness 5mm, round Dimmable Touch button 6000k (Cold White) SGS approved environmental protection coper free mirror complete all as specified and directed.
7
-
-
... More
S&F 15 mm dia brass chromium plated Central Hole Basin Mixer with Regular Spout with Popup Waste System with 450mm Long Braided Hoses fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstan head screwed for 15mm dia pipe fixed in repair. Make:- Jaquar QQT-CHR-7169B or equivalent as approved by GE.
8
-
-
... More
S&F 15mm dia chromium plated fancy type Bath & Shower Mixer including Telephone Shower Crutch & Shower Kit (9537N & 571), Wall Mounted for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed. Make:- Jaquar QQT-CHR-7267SHK or equivalent as approved by GE.
6
-
-
... More
S&F 15mm dia chromium plated fancy type sink mixer with swinging spout (wall mounted model) fixing and connection to pipes complete all as specified and as directed. Make:- Cera Cat Part No F 2004501, Pearl Cat Part No ARI-011, Hindware Cat Part No- F 330023
1
-
-
... More
S&F in repair hand Shower (Health Faucet) with 1 meter Long Easy Flex Tube in Chrome Finish & wall Hook complete all as specified and directed. Make:- Jaquar Cat Part No ALD-CHR-565 or equivalent approved by GE.
7
-
-
... More
S&F in repair 15 mm dia Concealed stop cock chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union fixed in repair. Make:- Jaquar or equivalent approved by GE.
4
-
-
... More
S&f in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf chromium plated bracket guard and railing 60cm long. Make:- Jaquar AKP-CHR-35771P or equivalent approved by GE.
8
-
-
... More
S&F Corner Glass Shelf (with Bracket) complete all as specified and directed. Make:- Jaquar Cat Part No ACN-CHR-1173 or equivalent approved by GE.
8
-
-
... More
S&F (in repair) chromium plated towel rail 450 mm long as approved quality complete all as specified and directed. Make:- Jaquar ACN-CHR-1111BNM or equivalent approved by GE.
7
-
-
... More
Material & Labour for PCC 1:2:4 type B-O(using 12.5 mm graded stone aggregates) as in padding on roof finished even and fair without using extra cement all as specified and directed.
27.5
-
-
... More
Material & labour for cleaning of concrete or plastered surface of roof and applying priming coat using with bituminous primer @ 0.30Kg per Sqm followed evenly by a tack coat @ 1.20 Kg per Sqm using 85/25 grade industrial hot blown bitumen, over it laid with 3mm thick APP modified polymeric water proofing membrane minimum weight 3.6 kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160gm per sqm) unrolled & bonded to substrate with side and end laps 75mm and 100mm as per manufactures instructions and applying over it of tack coat using 85/25 grade industrial hot blown bitumen @ 1.20Kg per Sqm and finally finish the top by providing 40mm thick brick tiles kiln burnt, laid over & including 15mm thick screed bed in cement mortar 1:6, joints of the tiles grouted and flush pointed with cement sand mortar 1:3 mixed with 5% crude oil by weight of cement, complete all as specified and directed. (Note:- Dismantling of existing water tank on roof disconnected and after cleaning same position re-connecting shall be deemed included in quoted rate of item).
550
-
-
... More
S&F in repair 12.5 mm thick tapered edge gypsum moisture resistant board (seamless type) conforming to IS: 2095- Part-I. false ceiling at all heights including providing and fixing of framework made of special sections power pressed from MS sheets and galvanized with zinc coating of 120g per sqm ( both sides inclusive) as per IS 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts and bolt of required size and other end of angle hanger fixed with intermediate GI channels 45x15x0.9mm running at the spacing of 1200mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm at 450 mm centre to centre shall be fixed in a direction perpendicular to GI intermediate channel with connecting clips made out of 2.64mm dia x 230 mm long GI wire at every junction including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall / partition with help of rawl plugs at 450 mm centre with 25 mm long dry wall screws at the rate of 230 mm interval including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screw of size 3.5x25 mm at 230 c/c including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compounds in three layers covering up to 150 mm on both sides of joints and including two course of primer & Acryllic Emulsion paint suitable for board all as per manufacturer's specification and also including the cost of making opening for light fitting, grills, diffusers cutout made with frame of perimeter channels suitably fixed, all complete as specified and directed.
227.81
-
-
... More
Material and Labour for POP decorative cornice moulding as in false ceiling bending/ moulding as required shape exceeding 08cm but not exceeding 18cm in width or girth fixing between junction of wall and ceiling at certain locations including two coats distempering complete all as specified and as directed.
300
-
-
... More
Material and Labour for POP decorative Round False Ceiling Cornice in 450 to 600 mm dia in all around ceiling fan/chandelier including two coats of distempering complete all as specified and as directed.
10
-
-
... More
S&F in repairs 15mm CP Two Way Angular Stop Cock with Wall Flange complete all as specified and as directed. Make:- Jaquar or equivalent approved by GE.
6
-
-
... More
S&F in repairs Brass Butter Fly Jet Spray with 1.2 meter Long Flexible Tube of premium quality fittled to Vitreous china, wash down water closet pan, Stop cock/ angle cock complete all as specified and as directed.
7
-
-
... More
S&F Double Arm Wall Mounted Reversible Plain/Magnifying (X3) Pivotal Mirror complete all as specified and directed. Make:- Jaquar ACN-CHR-1193N or equivalent as approved by GE.
1
-
-
... More
S&F in repair Soap Dispenser with Glass Bottle complete all as specified and as directed. Make:- Jaquar Cat Part NoACN-CHR-1135N or equivalent as approved by GE.
7
-
-
... More
S&F in repair Toilet Roll Holder complete all as specified and as directed. Make:- Jaquar Cat Part No ACN-CHR-1151N or equivalent approved by GE.
7
-
-
... More
S&F in repair Tumbler Holder complete all as specified and as directed. Make:- Jaquar Cat Part NoCAN-CHR-1141N or equivalent as approved by GE.
7
-
-
... More
S&F in repair Towel Ring complete all as specified and as directed. Make:- Jaquar Cat Part No AKP-CHR-35721P or equivalent approved by GE.
7
-
-
... More
S&F Towel Rack 600mm Long with Lower Hangers, Stainless Steel complete all as specified and directed. Make:- jaquar ACN-CHR-1181S or equivalent as approved by GE.
7
-
-
... More
M&L for At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.
53
-
-
... More
M&L for post construction anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor soil complete all as specified and as directed.
61.3
-
-
... More
M&L 200mm dia Salt - glazed stoneware drain pipes laid in trenches and jointed as specified internal diiameter of pipe 200mm including demolition, removal from site upto 3.0 Km as directed by engg in charge and breaking up drain pipe (salt glazed stone ware) complete all as specified and directed.
15
-
-
... More
M&L 150mm dia Salt - glazed stoneware drain pipes laid in trenches and jointed as specified internal diiameter of pipe 150mm including demolition, removal from site upto 3.0 Km as directed by engg in charge and breaking up drain pipe (salt glazed stone ware) complete all as specified and directed.
80
-
-
... More
M&L PCC 1:4:8 Type D-2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.
20.75
-
-
... More
M&L concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) for 150 mm dia pipe work in foul position complete all as specfied and directed.
72
-
-
... More
M&L concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) for 200 mm dia pipe work in foul position complete all as specified and directed.
13
-
-
... More
Demolition of PCC of any description and in any position not otherwise specifically provided for drain etc including removing the same where directed complete all as specified and directed.
0.5
-
-
... More
M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggragate) as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and throating making grovves for fixing of man hole cover including necessary form work complete all as specified and directed.
2.5
-
-
... More
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including finishing the top of benching even and smooth using extra cement (forming channel shall be measured and paid for separately) complete all as specified and directed.
45
-
-
... More
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150mm pipe complete all as specified and directed.
6
-
-
... More
M&L preparing plastered new surfaces of wall and applying three coats of white wash on wall surface complete all as specified and directed.
33
-
-
... More
M&L Septic tanks, exc in ordinary soil, fdn in PCC 1:2:4, brick work in CM 1:4, RCC slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame vvent shaft and sludge chambers etc complete for 25 users complete all as specified and directed. (Refer CEBZ TD Drg No TD/217 Sheet No 1/7 to 7/7)
1
-
-
... More
M&L for cheqeured cement concrete tiles 30cm x 30cm x 25 mm thick set, jointed & pointed in neat cement slurry in floor with gray cement and pigment in floors over 15mm screed bed in CM 1:6 complete all as specified and directed.
270
-
-
... More
Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.
7
-
-
... More
M&L RCC 1:2:4 Type B1 (using 20 mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
1.8
-
-
... More
S&F for Steel work in tubular trusses etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 complete all as specified and directed.
350
-
-
... More
S&F Hand rails MS , half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
1060
-
-
... More
S&F mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
80
-
-
... More
Formwork to sides of Rough finished of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter complete all as specified and directed.
26
-
-
... More
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding/ridges to wall, fixed with self tapping screws in ridges as specified including dismantling any type of sheets complete all as specified and directed.
58
-
-
... More
S&F Dholpur stone jali any colour 20-25mm thick (measured solid), including all mouldings and includingframe (stone frame as per site requirement) complete all as specified and directed.
134.33
-
-
... More
Providing and fixing sand stone (Colour as approved by GE) cladding in (wall lining) any shape at all heights with 18 to 20 mm thick gang saw cut stone with (machine cut edges) of uniform colour and size, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) mixed with adhesive (not to be paid separately) in proportion as per manufacture's specification, including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade at all levels including cutting, making recesses in stone slab, drilling holes, rubbing, polishing, curing, and scaffolding etc. complete in the required pattern complete all as specified and directed.
35.45
-
-
... More
Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed.
287
-
-
... More
Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, sheathed, copper conductor cable in and including PVC concealed conduit of not less than 20mm dia complete with all accessories/fittings, brass screws, washer etc, including modular boxes, modular plates suitable for fixing modular switches/sockets and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, sheathed and connected to common earth and earth duly complete all as specified and directed for the followings :-
-
-
-
... More
One tube light/Bulb/ ceiling fan/ exhaust fan/ security light point controlled by one, one way switch 05 / 06 Amps.
195
-
-
... More
One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.
25
-
-
... More
One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.
30
-
-
... More
One Bell point controlled by one, one way switch 05 / 06 Amps.
5
-
-
... More
Material and labour for point wiring with 2.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, sheathed, copper conductor cable in and including PVC concealed conduit of not less than 20mm dia complete with all accessories/fittings, brass screws, washer etc, including modular boxes, modular plates suitable for fixing modular switches/sockets and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable for one 15/16 amps socket outlet point on independent board, sheathed and connected to common earth and earth duly complete all as specified and directed.
32
-
-
... More
S&F Modular Switch, 1 module, 6A, AC, 240V, one way ISI Marked complete all as specified and directed.
250
-
-
... More
S&F Modular Socket, 2 module, 6A, 2/3 pin combined, AC, 240V, ISI Marked complete all as specified and directed.
55
-
-
... More
S&F Modular Socket, 2 module, 6A / 16A, 2/3 pin combined, AC, 240V, ISI Marked complete all as specified and directed.
32
-
-
... More
S&F Modular Switch, 1 module, 16A, AC, 240V, one way ISI Marked complete all as specified and directed.
32
-
-
... More
S&F Modular Bell Push, 1 module, 6A, AC, 240V, ISI Marked complete all as specified and directed.
5
-
-
... More
Supply and fixing Bell,AC , 230 volts ,Single pole complete all as specified and directed.
5
-
-
... More
Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.
89
-
-
... More
Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate complete all as specified and directed.
4
-
-
... More
Supply and fixing LED lamp 2 pin 9/10 watt complete all as specified and directed.
4
-
-
... More
Supply and fixing LED light fitting 1x20/22 watt,220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
40
-
-
... More
Supply and fixing LED light fitting mirror type with high output diffuser 2 feet,10 watt 220V, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copeer conductor cable of suitable size complete all as specified and directed.
10
-
-
... More
Supply and fixing 1x35 watt LED Building security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including security light brackets of 32mm dia GI pipe medium grade including flat iron clamps and Suitable nuts and bolts grouted in wall including all material required for fitting complete all as specified and directed.
10
-
-
... More
S/F in repairs Fancy light cast Aluminum polyurethane paint(with prior Treatments)bracket with round base with LED Lamp 05 to 11 watts complete all as specified and directed.
22
-
-
... More
S&F round shape 12 watt , 220V AC recessed type LED lamp suitable for roof ceiling complete all as specified and directed.
70
-
-
... More
S&F Bed type light fitting 3/4 watt LED lamp, 220V AC complete all as specified and directed.
10
-
-
... More
Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 06 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including taking down old u/s wiring & incl all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note:- Two run of submain wire, one run of earth wire & one run of conduit shall be measured as one length.
100
-
-
... More
Material and labour for sub main wiring with 10 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 10 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including taking down old u/s wiring & incl all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note:- Two run of submain wire, one run of earth wire & one run of conduit shall be measured as one length.
66
-
-
... More
Material and labour for sub main wiring with 2x4 Sqmm + 1x4.00 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 10 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including taking down old u/s wiring & incl all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note:- Two run of submain wire, one run of earth wire & one run of conduit shall be measured as one length.
215
-
-
... More
Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 08 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed.
8
-
-
... More
Supply and fixing MCB, SP, AC, 240 volts 'C' curve capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.
72
-
-
... More
Supply & fixing Double pole Isolator 240V, 40A, and making connections complete all as specified & directed.
8
-
-
... More
S&F VTPN DB, 4 way, 415 V, double door type suitable for mounting incoming MCCB and outgoing MCB’s double pole/single pole complete all as specified and directed.
2
-
-
... More
S&F in repairs, 4P MCCB 100 Amp, 50 Hz, 415 V with rupturing capacity 16KA , ISI Marked, and making connections complete all as specified & directed.
2
-
-
... More
Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.
NOTE:- incl main earthing GI wire from earth electrode to test point upto 7.5 metres.
6
-
-
... More
Supply and fixing Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, RPM 1200, copper winding of sweep 250mm complete all as specified and directed. Make:- Bajaj, Crompton, Orient, Khaitan, Usha.
8
-
-
... More
Supply and fixing Exhaust fan steel body AC single phase 230V of size 300mm sweep with blades and frame and louvers complete all as specified and directed. Make:- Bajaj, Crompton, Orient, Khaitan, Usha.
1
-
-
... More
Supply and fixing fan ceiling complete with blades, down rods, electronic regualtor and accessories, 230V, 1200 mm sweep, minimum air delivery 210 CFM with service value 6.00 BEE rated with Brushless direct current motor (BLDC) complete all as specified and direced. Make:- Atomberg, Havells, Bajaj, Crompton, Orient, Khaitan.
32
-
-
... More
Supply and fix electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, complete all accessories such as safety valve, thermostate, NRV, connectio piece etc complete all as directed. Make:- Havells, Bajaj, Jaquar
8
-
-
... More
Taking down existing ceiling fan of any size, CeiIing cable end, dismentalling blades, make one set of three blades and keep them safe to deposited to E/M yard complete all as specified and directed.
20
-
-
... More
Taking down existing exhaust fan of any size and keep them safe to deposited to E/M yard complete all as specified and directed.
9
-
-
... More
Taking down existing electric water heater storage of any capacity and keep them safe to deposited to E/M yard complete all as specified and directed.
8
-
-
... More
S/F in repairs Modular Power Switch and Socket Unit with factory made poly carbonate modular box, 20A, 3Pin, AC, 240V incl 20A MCB SP and Plug Top ISI Marked complete all as specified and directed.
8
-
-
... More
Supply ,laying commissioning ,testing of XLPE under ground LT cable 1100 volts grade of size 70 sqmm 3.5 core armoured PVC sheathed with aluminium conductor heavy duty laid in trench ,fixing on wall ,under road crossing through proctection pipe etc complete all as specified and directed including taking down old LT UG cable complete all as specified and directed.
65
-
-
... More
All as per Item No.202 above but 4core 6sqmm complete all as specified and directed.
150
-
-
... More
All as per Item No.202 above but 2core 6sqmm complete all as specified and directed.
130
-
-
... More
Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for foundation, etc. or for laying of Cable or Pipe etc. not exc 10 sqm on plan and not exc 1.5m in depth and getting out in soft/ losse soil and leveling of bottom surface to required level complete all as specified and as directed.
70
-
-
... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft/ losse soil complete all as specified and as directed.
25
-
-
... More
Supply and spreading clean fine dry river sand in trenches for cushioning of under ground cable/ cable duct complete all as specified and as directed. Note: Only punned thickness shall be measured for payment purpose.
20
-
-
... More
M&L for fly ash brick protection length of brick shall be laid across the length of cable) all as specified and directed.
1750
-
-
... More
Removing excavated material not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point in soft/ losse soil complete all as specified and as directed.
40
-
-
... More
GI light grade tubing 40mm dia laid in trenches, road crossing, pasing through pipe or laid in wall/pole complete all as specified and directed.
5
-
-
... More
S&F outdoor type LT Panel board made of CRCA sheet 3.15mm thick with MCCB incomer and comprising out going MCCBs/ MCBs with 4nos aluminium busbar of 200Amps rated capacity and with suiable mounting on PCC work. Complete all as specified for the following :-
(a) MCCB 160Amps, 4P ,25 KA -01 No (Incomer)
(b) MCCB 100A, 4P, 16KA -03 No (Out going) (01 X spare)
(c) MCB TPN 32A,10KA-01 No (out going)
(d) MCB SP 6-32A , 10KA -5 Nos (out going)
(e) Ammeter, Voltmeter & LED indication lamp set (R,Y,B)
1
-
-
... More
S&F Post top lantern LED type 20 watt 230 volts outdoor type, IP 65 protection complete all as specified and directed.
4
-
-
... More
S&F LED bollard pressure diecast powder coated housing with PC diffuser, efficient high output LED 10 watt with IP 65 protection complete all as specified and directed.
40
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements