Military Engineer Services Tender

Excavation in trenches n.exc 1.50 mtr wide and n. exc 1.50 mtr depth for foundation etc or for shafts , wells, cesspits , manholes , pier holes etc n.exc 10 Sqm on plan & n. exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in including spreading, levelling watering and well ramming in layers not exc. 25cm thick complete all as specified and directed.

Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5 M above the starting point, complete all as specified & directed.

M & L for sand cushioning with Ganga Sand to underground cable (8 cm thick before laying and 15 cm thick after laying the cable complete all as specified & directed. Note:- Punned thickness 18 CM only shall be considered for payment.

Supply and laying sub class 'B' bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed.

M&L in replacement for 50 mm bore GI tubing 'light grade' with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size complete all as specified & directed.

M&L in replacement for 80 mm bore GI tubing 'light grade' with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size complete all as specified & directed.

M&L in replacement for 100 mm bore GI tubing 'light grade' with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size complete all as specified & directed.

Supplying, laying commissioning and testing of LT underground cable of size 240 Sq mm 3.5 core 1100 volt grade, XLPE insulated , PVC sheathed heavy duty armoured with multistranded aluminium conductor are as per IS :7098 (Part -1) 1998, laid in trenches , duct , pipes or on poles etc. including cable gland, cable lugs, jointing, supporting clamps etc of the under mentioned type and sizes complete all as specified and directed.

Supplying, laying commissioning and testing of LT underground cable of size 185 Sq mm 3.5 core 1100 volt grade, XLPE insulated , PVC sheathed heavy duty armoured with multistranded aluminium conductor are as per IS :7098 (Part -1) 1998, laid in trenches , duct , pipes or on poles etc. including cable gland, cable lugs, jointing, supporting clamps etc of the under mentioned type and sizes complete all as specified and directed.

Supplying, laying commissioning and testing of LT underground cable of size 120 Sq mm 3.5 core 1100 volt grade, XLPE insulated , PVC sheathed heavy duty armoured with multistranded aluminium conductor are as per IS :7098 (Part -1) 1998, laid in trenches , duct , pipes or on poles etc. including cable gland, cable lugs, jointing, supporting clamps etc of the under mentioned type and sizes complete all as specified and directed.

Supplying, laying commissioning and testing of LT underground cable of size 95 Sq mm 3.5 core 1100 volt grade, XLPE insulated , PVC sheathed heavy duty armoured with multistranded aluminium conductor are as per IS :7098 (Part -1) 1998, laid in trenches , duct , pipes or on poles etc. including cable gland, cable lugs, jointing, supporting clamps etc of the under mentioned type and sizes complete all as specified and directed.

Supplying, laying commissioning and testing of LT underground cable of size 70 Sq mm 3.5 core 1100 volt grade, XLPE insulated, PVC sheathed heavy duty armoured with multistranded aluminium conductor are as per IS :7098 (Part -1) 1998, laid in trenches , duct , pipes or on poles etc. including cable gland, cable lugs, jointing, supporting clamps etc of the under mentioned type and sizes complete all as specified and directed.

Supplying, laying commissioning and testing of LT underground cable of size 50 Sq mm 3.5 core 1100 volt grade, XLPE insulated, PVC sheathed heavy duty armoured with multistranded aluminium conductor are as per IS :7098 (Part -1) 1998, laid in trenches , duct, pipes or on poles etc. including cable gland, cable lugs, jointing, supporting clamps etc of the under mentioned type and sizes complete all as specified and directed.

Supplying, laying commissioning and testing of LT underground cable of size 35 Sq mm 3.5 core 1100 volt grade, XLPE insulated, PVC sheathed heavy duty armoured with multistranded aluminium conductor are as per IS :7098 (Part -1) 1998, laid in trenches , duct, pipes or on poles etc. including cable gland, cable lugs, jointing, supporting clamps etc of the under mentioned type and sizes complete all as specified and directed.

Supplying, laying commissioning and testing of LT underground cable of size 25 Sq mm 4.0 core 1100 volt grade, XLPE insulated , PVC sheathed heavy duty armoured with multistranded aluminium conductor are as per IS :7098 (Part -1) 1998, laid in trenches , duct, pipes or on poles etc. including cable gland, cable lugs, jointing, supporting clamps etc of the under mentioned type and sizes complete all as specified and directed.

Supplying, laying commissioning and testing of LT underground cable of size 10 Sq mm 4.0 core 1100 volt grade, XLPE insulated , PVC sheathed heavy duty armoured with multistranded aluminium conductor are as per IS :7098 (Part -1) 1998, laid in trenches , duct , pipes or on poles etc. including cable gland, cable lugs, jointing, supporting clamps etc of the under mentioned type and sizes complete all as specified and directed.

S&F 2.5 sqmm 3 core flexible copper cable from junction box to street light complete all as specified and directed.

S&F PVC junction box of size 200x150x100 mm including two no. aluminium bus bar of 2mm thick dully fitted on the suitable insulators with fixing with 35x6 mm MS flat iron clamp with nut bolt and washers and incl.one MCB SP 6 amp.with rail fitted in PVC box including suitable size cable hole, and gland complete all as specified and directed.

Supply, fixing , connecting to electrical system & testing of Busbar panel board ,cubical type for out door use, made out of 3.15 mm thick CRCA sheet factory made, with suitable size and supported with 4 Nos MS Angle legs , duly painted with two coats of powder coated paint over one coat of red oxide primer effectively PVC gasket and sealed mounted on PCC blocks double door type with locking arrangement with handle at front and openable at front & back both side with required hinges heavy duty, compartementalised suitably including High conductivity aluminium busbar (Set of 4 strips), 4 Nos TPN of 600 Amps rating (RYB) for phase and 1 No for neutral mounted on DMC support with heat shrink sleeve, provision for tapping incoming & outgoing electric connections with suitable size of aluminium lugs glands and comprising of the following accessories :- INCOMMER-(a) MCCB 400 Amp 36 KA Amps -1 No. (Thermal and magnetic adjustable type) OUTGOING (b) MCCB 200 Amp 36 KA - 2 Nos , (c) MCCB 160 Amp 36KA - 1 No. (d) MCCB 100 Amp 36KA - 2 Nos. (e) Timer for street light - 01 No. (d) Phase indication lamp, LED type(Set of 3) -1 Set (e) Ammeter anolog type having measuring range (0-500) Amps with CTs etc including rotary switch to measure load of each Phase (f) Volt meter having measuring range (0-500) volt with rotary switch to measure voltage of phase R.Y.B (g) Grouting of panel including earth work as required PCC 1:3:6 type C-1 using 20 mm graded stone aggregate & plastering with CM 1:4 complete.

Supply, fixing , connecting to electrical system & testing of Busbar panel board ,cubical type for out door use, made out of 3.15 mm thick CRCA sheet factory made, with suitable size and supported with 4 Nos MS Angle legs , duly painted with two coats of powder coated paint over one coat of red oxide primer effectively PVC gasket and sealed mounted on PCC blocks double door type with locking arrangement with handle at front and openable at front &back both side with required hinges heavy duty, compartemtalised suitably including High conductivity aluminium busbar (Set of 4 strips), 4 Nos TPN of 600 amps rating (RYB) for phase and 1 No for neutral mounted on DMC support with heat shrink sleeve, provision for tapping incoming & outgoing electric connections with suitable size of aluminium lugs glands and comprising of the following accessories :- INCOMER-(a) MCCB 320 Amp 36 KA Amps -1 No. (Thermal and magnetic adjustable type) OUTGOING (b) MCCB 125 amp 25 KA -04 No , (c) Timer for street light- 01 No (d) Phase indication lamp, LED type(set of 3) -1 Set (e) Ammeter anolog type having measuring range (0-500) Amps with CTs etc including rotary switch to measure load of each Phase (f) Volt meter having measuring range (0-500) volt with rotary switch to measure voltage of phase R.Y.B (g) Grouting of panel including earth work as required PCC 1:3:6 type C-1 using 20 mm graded stone aggregate & plastering with CM 1:4 complete.

Supply, fixing , connecting to electrical system & testing of Busbar panel board ,cubical type for out door use, made out of 3.15 mm thick CRCA sheet factory made, with suitable size and supported with 4 Nos MS Angle legs , duly painted with two coats of powder coated paint over one coat of red oxide primer effectively PVC gasket and sealed mounted on PCC blocks double door type with locking arrangement with handle at front and openable at front &back both side with required hinges heavy duty, compartemtalised suitably including High conductivity aluminium busbar (Set of 4 strips), 4 Nos TPN of 950 Amps rating (RYB) for phase and 1 No for neutral mounted on DMC support with heat shrink sleeve, provision for tapping incoming & outgoing electric connections with suitable size of aluminium lugs glands and comprising of the following accessories :- INCOMER-(a) MCCB 630 Amp 50 KA Amps -1 No. (Thermal and magnetic adjustable type) OUTGOING (b) MCCB 400 amp 36 KA -01 No , (c) MCCB 250 Amp 25 KA -03 Nos , (d) MCCB 125 Amp 25 KA -02 Nos (e) Timer for street light- 01 No (f) Phase indication lamp, LED type(set of 3) -1 Set (g) Ammeter anolog type having measuring range (0-500) Amps with CTs etc including rotary switch to measure load of each Phase (h) Volt meter having measuring range (0-500) volt with rotary switch to measure voltage of phase R.Y.B (j) Grouting of panel including earth work as required PCC 1:3:6 type C-1 using 20 mm graded stone aggregate & plastering with CM 1:4 complete.

Supply, fixing , connecting to electrical system & testing of Busbar panel board ,cubical type for out door use, made out of 3.15 mm thick CRCA sheet factory made, with suitable size and supported with 4 Nos MS Angle legs , duly painted with two coats of powder coated paint over one coat of red oxide primer effectively PVC gasket and sealed mounted on PCC blocks double door type with locking arrangement with handle at front and openable at front & back both side with required hinges heavy duty, compartemtalised suitably including High conductivity aluminium busbar (Set of 4 strips), 4 Nos TPN of 600 Amps rating (RYB) for phase and 1 No for neutral mounted on DMC support with heat shrink sleeve, provision for tapping incoming & outgoing electric connections with suitable size of aluminium lugs glands and comprising of the following accessories :- INCOMER-(a) MCCB 400 Amp 36 KA Amps -1 No. (Thermal and magnetic adjustable type) OUTGOING (b) MCCB 250 amp 25 KA -03 Nos , (c) MCCB 160 Amp 25 KA -01 No, (e) Phase indication lamp, LED type(set of 3) -1 Set (f) Ammeter anolog type having measuring range (0-500) Amps with CTs etc including rotary switch to measure load of each Phase (g) Volt meter having measuring range (0-500) volt with rotary switch to measure voltage of phase R.Y.B (h) Grouting of panel including earth work as required PCC 1:3:6 type C-1 using 20 mm graded stone aggregate & plastering with CM 1:4 complete.

Supply, fixing , connecting to electrical system & testing of Busbar panel board ,cubical type for out door use, made out of 3.15 mm thick CRCA sheet factory made, with suitable size and supported with 4 Nos MS Angle legs , duly painted with two coats of powder coated paint over one coat of red oxide primer effectively PVC gasket and sealed mounted on PCC blocks double door type with locking arrangement with handle at front and openable at front & back both side with required hinges heavy duty, compartemtalised suitably including High conductivity aluminium busbar (Set of 4 strips), 4 Nos TPN of 600 Amps rating (RYB) for phase and 1 No for neutral mounted on DMC support with heat shrink sleeve, provision for tapping incoming & outgoing electric connections with suitable size of aluminium lugs glands and comprising of the following accessories :- INCOMER-(a) MCCB 400 Amp 36 KA Amps -1 No. (Thermal and magnetic adjustable type) OUTGOING (b) MCCB 250 amp 25 KA -02 Nos , (c) MCCB 160 Amp 25 KA -01 No, (d) MCCB 100 Amp 25 KA -02 Nos, (e) Phase indication lamp, LED type(set of 3) -1 Set (f) Ammeter anolog type having measuring range (0-500) Amps with CTs etc including rotary switch to measure load of each Phase (g) Volt meter having measuring range (0-500) volt with rotary switch to measure voltage of phase R.Y.B (h) Grouting of panel including earth work as required PCC 1:3:6 type C-1 using 20 mm graded stone aggregate & plastering with CM 1:4 complete.

Supply, fixing , connecting to electrical system & testing of Busbar panel board ,cubical type for out door use, made out of 3.15 mm thick CRCA sheet factory made, with suitable size and supported with 4 Nos MS Angle legs , duly painted with two coats of powder coated paint over one coat of red oxide primer effectively PVC gasket and sealed mounted on PCC blocks double door type with locking arrangement with handle at front and openable at front & back both side with required hinges heavy duty, compartemtalised suitably including High conductivity aluminium busbar (Set of 4 strips), 4 Nos TPN of 500 Amps rating (RYB) for phase and 1 No for neutral mounted on DMC support with heat shrink sleeve, provision for tapping incoming & outgoing electric connections with suitable size of aluminium lugs glands and comprising of the following accessories :- INCOMER-(a) MCCB 200 Amp 36 KA Amps -1 No. (Thermal and magnetic adjustable type) OUTGOING (b) MCCB 160 Amp 25 KA -01 No, (c) MCCB 100 Amp 25 KA -02 Nos, (d) Timer for street light- 01 No (e) Phase indication lamp, LED type(set of 3) -1 Set (f) Ammeter anolog type having measuring range (0-500) Amps with CTs etc including rotary switch to measure load of each Phase (g) Volt meter having measuring range (0-500) volt with rotary switch to measure voltage of phase R.Y.B (h) Grouting of panel including earth work as required PCC 1:3:6 type C-1 using 20 mm graded stone aggregate & plastering with CM 1:4 complete.

Supply, fixing , connecting to electrical system & testing of Busbar panel board ,cubical type for out door use, made out of 3.15 mm thick CRCA sheet factory made, with suitable size and supported with 4 Nos MS Angle legs , duly painted with two coats of powder coated paint over one coat of red oxide primer effectively PVC gasket and sealed mounted on PCC blocks double door type with locking arrangement with handle at front and openable at front & back both side with required hinges heavy duty, compartemtalised suitably including High conductivity aluminium busbar (Set of 4 strips), 4 Nos TPN of 950 Amps rating (RYB) for phase and 1 No for neutral mounted on DMC support with heat shrink sleeve, provision for tapping incoming & outgoing electric connections with suitable size of aluminium lugs glands and comprising of the following accessories :- INCOMER-(a) MCCB 400 Amp 36 KA Amps -1 No. (Thermal and magnetic adjustable type) OUTGOING (b) MCCB 160 Amp 25 KA -01 No, (c) MCCB 100 Amp 25 KA -02 Nos, (d) Phase indication lamp, LED type(set of 3) -1 Set (e) Ammeter anolog type having measuring range (0-500) Amps with CTs etc including rotary switch to measure load of each Phase (f) Volt meter having measuring range (0-500) volt with rotary switch to measure voltage of phase R.Y.B (g) Grouting of panel including earth work as required PCC 1:3:6 type C-1 using 20 mm graded stone aggregate & plastering with CM 1:4 complete.

M&L for earthing complete with galvanized steel earth plate electrode of 60 cm X 60 cm X 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized strip of size 32 mm X 6 mm as earth lead by means of bolts, nuts, checknuts and washers of galvanized iron or steel, galvanized iron pipe of 40 mm diameter connected to earthing test point, all as shown in electrical plate No. 5, connected to earthing test point including testing on completion, excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep with a 10 mm deep CI cover hinged to CI frame on ground level, GI watering pipe, funnel, etc. and connected to the earth point and testing complete all as specified and directed.

Schedule of Credit (MINUS) Rs. 48,640.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. ] This amount shall be automatically deducted to arrive at tendered sum