Military Engineer Services Tender

Design and M&L for construction of Pre-engineered building for block of workshop with office, store, staircase, shutters, windows, ventilators and turbo ventilators, bird proofing alongwith shutter and supporting structure for crane with longitudinal Gantry as shown on the Architectural drawings and as per Design Basis Report Note: (i) EOT crane with Gantry (Lateral) shall be measured and paid seperately (ii) The complete design of the bldgs mentioned under Sch ‘A’ Part-I shall be carried out and the design and drawings shall got vetted from any IIT & also refer scope of work mentioned in Sch 'A' Notes and details of scope under Phase-I and Phase- II. Contractor shall also submit detailed estimate alongwith yard stick for approval by CWE as per Annex 'B' to Sch 'A' Notes and shall be deemed to include in quoted lump sum.

Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY WORKS as listed in Schedule ‘A’ Part- II (Ref prepriced schedule attached seperately)

Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION WORKS as listed in Schedule ‘A’ Part- III (Ref prepriced schedule attached seperately)

Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY WORKS as listed in Schedule ‘A’ Part- IV (Ref prepriced schedule attached seperately)

Lump sum price worked out by the contractor for EXTERNAL ELETRIC SUPPLY WORKS as listed in Schedule ‘A’ Part- V (Ref prepriced schedule attached seperately)

Lump sum price worked out by the contractor for STONE SETT FLOORING WORKS as listed in Schedule ‘A’ Part- VI (Ref prepriced schedule attached seperately)

Lump sum price worked out by the contractor for AREA DRAINAGE WORKS as listed in Schedule ‘A’ Part- VII (Ref prepriced schedule attached seperately)

Lump sum price worked out by the contractor for SEWAGE DISPOSAL WORKS as listed in Schedule ‘A’ Part-VIII (Ref prepriced schedule attached seperately)

Lump sum price worked out by the contractor for REFRIGERATION & AC WORKS as listed in Schedule ‘A’ Part-IX (Ref prepriced schedule attached seperately)

Lump sum price worked out by the contractor for LIGHTNING PROTECTION & CHEMICAL EARTHING WORKS as listed in Schedule ‘A’ Part-X (Ref prepriced schedule attached seperately)

Lump sum price worked out by the contractor for EXCAVATION, EARTH WORK AND SITE DEVELOPMENT WORKS as listed in Schedule ‘A’ Part-XI (Ref prepriced schedule attached seperately)

Provisional Sum for 3Mtr high RCC staging for 3000 Litre PVC Water Storage tank complete all as directed by GE. (i) Add/deduct__________% (Contractor to quote lumpsum amount in column 6 which will be converted to percentage over /below) amount quoted by the contractor shall not exceed 15% above the amount inserted in col 5. However, contractor may quote lower amount than inserted in col 5. However, If contractor quotes amount more than (+) 15% then it will be reduced/ revised to (+) 15% only.

SCH 'A' Pt - XII (MISCELLANEOUS ITEMS)

INTERNAL ELECTRIFICATION AND HOT WATER SUPPLY WORKS NOTE:- For items of INTERNAL ELECTRIFICATION AND HOT WATER SUPPLY WORKS notes given at the beginning of Sch ‘A’ Part-III ( INTERNAL ELECTRIFICATION AND HOT WATER SUPPLY WORKS) shall also be applicable.

M&L point wiring for light point wiring complete with 1.5 Sq.mmm PVC insulation unsheathed muilt-starnded FRLSH copper conductor 1100 Volts grade draw through in and including 20 mm dia PVC conduit and conduit accessories, concealed in walls and terminated to and including provision of modular metal flush boxes (metal switch board of any type and size) with modular metal frame plate and white cover for housing switch, sockets, regulators etc, including 1.5 sqmm PVC insulated unsheathed multi-stranded FRLSH copper conducotor cable as earth continuity conductor and connecting to common earth dolly, complete all as specified and directed for the following points (Ser Item No 5.02 to 5.07) . NOTE;- The quoted rate is deemed to inclusive of cost of metal flush boxes, modular white cover plate. (ii) MS ERW conduit shall be provided on exposed surface i.e. Trusses/ Girder etc and shall be fixed with MS Clamp / saddle in lieu of concealed PVC.

One light point/ fan point/ exhaust fan point controlled by one way 6A modular switch with ISI Marked

One socket outlet 3pin independent controlled by one way 6A modular switch with ISI Marked

One socket outlet 3pin on same board controlled by one way 6A modular switch with ISI Marked

All as per Sl item No. 5.01 above, but with cable 2.5 sqmm for phase and neutral & 2.5 sqmm for earth continuity complete for 6/16 Amps socket point on independent board with ISI Marked complete all as specified and directed

All as per Sl item No. 5.01 above, but with cable 4.0 sqmm for phase and neutral & 4.0 sqmm for earth continuity complete for 6/16 Amps socket point on independent board with ISI Marked complete all as specified and directed

S&F LED tube light fitting batten type, 20 W, 230v , efficacy 120 Lumens per watt, colour temprature 6500 K (Cool White), power factor greater than 0.90, polycarbonate body , CRI 80, IP rating IP 20,THDv within 5% and THDi (8-10%) and integrated electronic driver complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose all with ISI Marked as specified and directed. Notes :- 1.The rate of three core twisted flexible copper conductor cable of suitable size for connection is included in this item and nothing shall be paid extra on this account. 2. Warranty for replacement of each LED Light fitting shall not be less than 05 years from the date of purchase. 3. Date of Purchase shall be marked on each fixture with permanent marker for redeeming warrenty benefits.

Supply and fix of LED light fitting 1 x 10 W bulkhead luminaires including LED Driver holder connecting up with three core flexible copper conductor cable of suitable size efficiency 120 Lumens per watt, colour temperature 6500k (Cool White), Power factor grater than 0.9, Polycarbonate body, CRI 80, IP Rating, IP 20, THDv with in 5 % and THDi (8-10%) and integrated Electronic driver complete with al accessories internally Pre-wired and including connecting with 3 Core twisted flexible copper conductor cable of suitable size from celling rose all as specified and directed. Notes:- (i) The rate of three core twisted flexible copper conductor cable of suitable size for connection is included in this item and noting shall be paid extra on this account. (ii) Warranty for replacement of each LED lite fitting shall not be less than 2 years from the date of purchase. (iii) Date of purchase shall be marked on each fixture with permanent marker for redeeming warranty benefits.

S & F LED Security light fitting 35 Watt, luman efficacy of LED 140 lm/W, PF 0.95, THD 10%, colour temprature 6500K, CRI 70, system lumen not less then 2600 Lm, made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens with toughed glass having bottom separate driver compartment with IP 66 Protection and Impact resistant of IK 07 etc and all accessories previewed complete including mounting bracket of GI Pipe 40 mm inner dia light grade of required length and shape incl bending, forging or welding etc and suitable bolts and nuts with washers, including connecting with PVC insulated multi stranded copper flexible cable of size 0.5 sq mm three core from ceiling rose to fitting with ISI Marked all as specified an directed. Note :- (i) Warranty for replacement of each LED light fitting shall not be less than 05years from the date of installation. (ii) Date of installation shall be marked on each fixture with paint for redeeming warranty benefits.

S & F LED high Bay luminaire suitable for and including 1 No 80 Watt LED Lamp fixed to MPPCB with universal mounting system and integral control gear, compact pressure die cast aluminium housing powder coated, accomodating lamp h older and the aluminium gear tray assembly all accessories pre wired upto the terminal block, aluminium reflector electro chemically brightened and anodised with heat resistant and toughened glass with EPR gasket, Enclosed version IP 54 protection, mounting with standard eye bolt with 15mm inside diameter, led color temp 5700+/- 300K, secondary lens optics provided, constant LED current driver provided woth surge protection 4kV, Input voltage range 120-277V AC ISI Marked complete all as specified an directed. Note :- (i) Warranty for replacement of each LED light fitting shall not be less than 05years from the date of installation. (ii) Date of installation shall be marked on each fixture with paint for redeeming warranty benefits.

Supply & fix Air Circulator fans Wall mounted type 600mm (24 inch) oscillating type, high efficiency capacitor motor rated at 220/240volts, 190 watts, 1400 RPM single speed, air delivery 280 Cubic meter per minute, vertical angle adjustable from 22 o to 45 o with greased packed ball bearing on both ends and auto transformer is provided alongwith two toggle switches, One is marked on and off, other regulates the speed, heavy cast iron base, guard should be of heavily chrome plated ornamental guard of heavy gauge wire in two parts covering front and rear clipped together, enclosing fan blades for safety, blades should be dynamically balanced three leafed propeller, cast aluminium blade set with three core 3m long cable completed all as specified and directed.

EXTERNAL WATER SUPPLY WORKS NOTE:- For items of EXTERNAL WATER SUPPLY WORKS notes given at the beginning of Sch ‘A’ Part-IV (EXTERNAL WATER SUPPLY WORKS) shall also be applicable.

Supply & Installation testing and commissoning of monoblock pump set consist of gland packing with cast iron impeller, C-40 shaft, TEFC motor, IP-44, F-class insulation with minimum discharge 500LPM at 30 mtr head, 3 phase AC, 415 Volts, 50 Hz, 1500 RPM, sunction/ delivery of size 100mm of capacity 5HP including required PCC foundation work as per manufacturer recommendation complete all as specified and directed .

EXTERNAL ELETRIC SUPPLY AND DG SET WORKS NOTE:- For items of EXTERNAL ELECTRIC SUPPLY notes given at the beginning of Sch ‘A’ Part-V (EXTERNAL ELETRIC SUPPLY) shall also be applicable.

Supply and fix MCCB / MCB distribution board, VTPN, 4 way with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete all as specified and directed. Note: MCCBs / MCBs shall be measured separately.

Supply, installation, testing and commissioning of outdoor type cubicle panel board, 3 phase, 4 wire, 415 V, 50 Hz, factory fabricated with 2.0mm thick CRCA sheet duly compartmentalized for each control gear, lockable/openable by keys, pretreated using seven tank process followed by powder coat painting of approved shade, provided with suitable gasket to make it dust/ vermin proof and IP-43 degree of protection. The size of panel shall be suitable for accommodating and provision of following switch gears and control gear- (a) Main bus bar: TPN Aluminium bus bar - 01 Set (b) Incomer: (i) MCCB, 250A, 4 Pole adjustable type breaking capacity 36 KA - 01 No. (ii) Digital Voltmeter with Selector switch - 01 Set. (iii) Digital Ammeter with selector switch & CT's - 01 Set (iv) LED indication lamp R,Y,B - 01 Set of 03 (c) Outgoing: (i) MCCB 100A, 3 Pole adjustable type breaking capacity 16 KA - 03 Nos (ii) MCCB 63A, 3 Pole adjustable type breaking capacity 16 KA - 02 Nos + 01 Stand by (iii) MCB SPN 40A, 10 KA - 03 Nos Note :- (i) All the cables has to be inserted into the panel through suitable cable glands and fixed woth proper lugs. (ii) Adequate spacing to be provided between ground and panel for easy maintenance in future. (iii) The PCC foundation for the grouting of panel shall be 0.4 mtr high from ground level.

SEWAGE DISPOSAL WORKS NOTE:- For items of SEWAGE DISPOSAL WORKS notes given at the beginning of SCHEDULE 'A' PART -VIII (SEWAGE DISPOSAL WORKS) shall also be applicable.

M&L for DWCPE(SN8) 180mm(OD) /163 (ID) mm bore of pipe laid and jointed on concrete bed 150mm thick , complete including testing etc. all as specified. (Concrete bed shall be measured and paid for separately).

Construction of Septic Tank with provn of excavation, in any type of soil, foundation in PCC 1:4:8, walls of fly ash brick masonry with top cover of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCI for 50 Users complete as per TD drawing (CEBZ/TD/76/2011 Sheet No 1/2 to 2/2) complete all as specified and directed.

Construction of Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of of size 1.2m Dia and 3m Depth as per TD drawing (CEBZ/TD/78/2011 Sheet No 1/2 to 2/2) complete all as specified and directed

REFRIGERATION AND AC WORKS NOTE:- For items of REFRIGERATION AND AC WORKS notes given at the beginning of SCHEDULE 'A' PART -IX (REFRIGERATION AND AC WORKS) shall also be applicable.

Supply, connect & testing of automatic voltage stabilizer, wall mounted type for low voltage cut-off, single phase, AC, 50 Hz, 15 Amps rating ,suitable for input voltage range 160V-280V AC with 3min±20 sec delay for Air Conditioner Complete all as specified and directed by Engineer in charge.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1 KVA Complete all as specified and directed by Engineer in charge.

LIGHTNING PROTECTION WORKS NOTE:- For items of LIGHTNING PROTECTION WORKS notes given at the beginning of SCHEDULE 'A' PART -X ( LIGHTNING PROTECTION WORKS) shall also be applicable.

S&F RCC heavy duty pin type insulators with provision of fastening on roof inc. Fatsening accessories and fastened Aluminium strip with nut and bolts of suitable size as directed by Engineer in Charge

EOT CRANE WORKS

Supply, installation, Testing & commissioning of Electric operated crane complete with span 16 meters of working capacity 10 Ton, 6 Meter lift complete all as specified and as directed including following specification : (a) Capacity ( Safe Working Load) : 10 Ton (b) Span : 16 meters (c) Lift : 6 meter (d) Type : Double Girder (e) Speed (Hoisting) : 3 MPM (f) Speed ( Cross Travel ) : 8 MPM (g) Speed ( Long Travel ) : 12 MPM (h) Creep - 10% on all the motion (i) Notors : Sq cage crane duty (S4) motor as pe IS 3125 (j) Motor HP : (Housing) 15 HP x 1 No. (k) Motor HP (CT) : 1.5 HP x 1 No. (l) Motor HP (LT) : 2 HP x 2 Nos. (m) Class & Duty : M6, Medium (n) Design Standard : As per IS : 807, IS:3177/3839 (o) Wire Rope : 16mm x 4 fall, 6 x 36 Const (p) Operation : Through hanging pendent push button (q) Control Voltage : 10/24V (r) Supply Voltage : 400/440V, 50 Hz, AC (s) Material of wheel : Forged Steel (Contd.....)

Contd from last item (t) Type of hoisting brake : Electro shoe type brake - Fail to Safe (u) Type of coupling : M.S Fabricated or casted. (v) Type of bearing : Antifriction Ball/Roller Bearings (w) Type of gear box : Totally enclosed splash lubricated (x) Type of hook : Shank type, made of forged steel, supported on trust bearing (y) Bridge grider : Standard Joist/Box type fabrication from plate, max, deflection of main girder limited to 1 /900th span of live loads including the weight of the hoist (z) Cross Conductor : Festoon type trailing cable with festoon trolly & track (aa) L.T Mechanism : Double Motor (Twin) drive (ab) L.T DSL : chroudid bus bar

Supply, installation, Testing & commissioning of Electric operated crane complete with span 16 meters of working capacity 05 Ton, 6 Meter lift complete all as specified and as directed including following specification : (a) Capacity ( Safe Working Load) : 05Ton (b) Span : 16 meters (c) Lift : 6 meter (d) Type : Double Girder (e) Speed (Hoisting) : 3 MPM (f) Speed ( Cross Travel ) : 8 MPM (g) Speed ( Long Travel ) : 12 MPM (h) Creep - 10% on all the motion (i) Notors : Sq cage crane duty (S4) motor as pe IS 3125 (j) Motor HP : (Housing) 5 HP x 1 No. (k) Motor HP (CT) : .75 HP x 1 No. (l) Motor HP (LT) : 1 HP x 2 Nos. (m) Class & Duty : M6, Medium (n) Design Standard : As per IS : 807, IS:3177/3839 (o) Wire Rope : 12mm x 4 fall, 6 x 36 Const (p) Operation : Through hanging pendent push button (q) Control Voltage : 10/24V (r) Supply Voltage : 400/440V, 50 Hz, AC (Contd.....)

Contd from last item (s) Material of wheel : Forged Steel (t) Type of hoisting brake : Electro shoe type brake - Fail to Safe (u) Type of coupling : M.S Fabricated or casted. (v) Type of bearing : Antifriction Ball/Roller Bearings (w) Type of gear box : Totally enclosed splash lubricated (x) Type of hook : Shank type, made of forged steel, supported on trust bearing (y) Bridge grider : Standard Joist/Box type fabrication from plate, max, deflection of main girder limited to 1 /900th span of live loads including the weight of the hoist (z) Cross Conductor : Festoon type trailing cable with festoon trolly & track (aa) L.T Mechanism : Double Motor (Twin) drive (ab) L.T DSL : chroudid bus bar