Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Eprocure
Opening Date26 Dec 2024
Closing Date21 Jan 2025
Tender Amount₹ 9,80,00,000
Costs
EMD
₹ 8,15,000Document Cost
₹ 3,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_681071_1Tender No
80902/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
S&F pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc, complete all as specified and directed by Engr-In-Charge.
2490
-
-
... More
S&F 35 mm thick factory made flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both sides include provision of suitable blocks for taking mortice locks, latche, or other fittings,complete all as specified and directed by Engr-In-Charge..
1735
-
-
... More
S&F 2nd class hard wood 35mm thick factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as directed by Engr-In-Charge..
506
-
-
... More
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless steel wire staples, complete all as specified and directed by Engr-In-Charge.
559
-
-
... More
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing,complete all as specified and directed by Engr-In-Charge..
1431
-
-
... More
S&F 28 to 30mm thick factory made solid PVC moulded door shutter with particle board core with 5mm thick PVC moulded sheet on the front face and 5 mm thick PVC plain colour sheet on back face, complete, all as specified and directed by Engr-In-Charge..
449
-
-
... More
S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section, complete, all as specified and directed by Engr-In-Charge.
2500
-
-
... More
S & F 150 mm size Aluminium handles, cast type & anodised, complete, all as specified and directed by Engr-In-Charge.
2724
-
-
... More
S&F for stainless steel butt hinges medium weight 100 mm long, complete, all as specified and directed by Engr-In-Charge.
1107
-
-
... More
S&F powder coated Anodised aluminium frame (minimum thickness of powder coating 50 micron) for windows, ventilators (sliding , fixed or casement) with one or more rebates including joining cleat for fixing etc, complete, all as specified and directed by Engr-In-Charge.
2396
-
-
... More
S & F powder coated anodised Aluminium alloy sections sliding windows with frames Series-B (18 mm) and , 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed. Note : Quoted rate shall include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle with or without opeing for AC/cooler, complete, all as specified and directed by Engr-In-Charge.
1084
-
-
... More
S&F Anodised powder coated aluminium window and ventilator shutters, fixed type with sash bar and louvered, aluminium section weighing 0.55 Kg/M including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete, all as specified and directed by Engr-In-Charge.
139
-
-
... More
S&F Anodised powder coated aluminium window and ventilator shutters, side hung type with sash bar and louvered, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws incl pegstay 150mmlong, hinges100mm long, suitable handle etc., complete, all as specified and directed by Engr-In-Charge.
406
-
-
... More
Supply only 4.80 mm thick Sheet glass, selected quality, in squres in n.exc 0.50 sq m each pane.
201
-
-
... More
M&L for PCC 1:3:6 type C0 using 12.50 mm graded crushed stone aggregate as in bed block or filling of chowkats incl necessary form work wherever required, complete, all as specified and directed by Engr-In-Charge.
30
-
-
... More
S & F mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete, all as specified and directed by Engr-In-Charge.
32704
-
-
... More
S&F 300 mm Aluminium alloy, anodised, sliding door bolts, with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy, complete, all as specified and directed by Engr-In-Charge.
304
-
-
... More
S&F 100mm long hasp and staple, aluminium anodised incl bolt to hinges plate fixed with screws, complete, all as specified and directed by Engr-In-Charge.
304
-
-
... More
S&F 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in door with screws, complete, all as specified and directed by Engr-In-Charge.
678
-
-
... More
S&F in repair Tubular towel rail 20mm dia 600mm long Aluminium Anodised as per sample approved by the GE and as directed by Engr-In-Charge.
152
-
-
... More
S&F in repairs curtain rod stainless steel , 20 mm bore with fixing brackets knobs, stops, rollers, and fancy end caps etc.as per sample approved by the GE and as directed by Engr-In-Charge.
2429
-
-
... More
S&F mild steel 300mm ordinary rat rail rod pattern springs including roller and roller plate, complete, all as specified and directed by Engr-In-Charge.
304
-
-
... More
Demolition of concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.
382
-
-
... More
Roughening the surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust and brushing neat cement slurry with 3.0 kg of cement per Sqm complete all as specified and directed
4031
-
-
... More
M&L for 25 mm thick PCC type B-0 (1:2:4) using 12.5 mm aggregate as in floor, finished even and rough to received top layer or tiling, complete, all as specified and directed by Engr-In-Charge.
7566
-
-
... More
M&L for Non skid Ceramic coloured, joint free tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm and not exceeding 0.38 sqm, as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed in CM 1:4, complete, all as specified and directed by Engr-In-Charge.
7022
-
-
... More
All as per description of serial item no 29 above but as in skirting over and including 10mm thick backing coat in CM 1:3, complete, all as specified and directed by Engr-In-Charge.
685
-
-
... More
Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) and rubbish off the premishes, all as directed by Engr-In-Charge. .
5098
-
-
... More
M & L for non skid ceramic tiles (colored), 7 to 8 mm thick as in floor area of each tile exceeding 0.6 Sqm but not exceeding 0 .11 Sqm , set and jointed in neat cement slurry and pointed in white or colored cement to match over and including screed bed or beeding layers of 15mm thick in CM 1:4 as in floors, complete, all as specified and directed by Engr-In-Charge.
449
-
-
... More
M&L for Coloured Glazed ceramic tiles in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including10mm thick plaster in cement mortar (1:4), complete, all as specified and directed by Engr-In-Charge.
4692
-
-
... More
M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) on cooking platforms and like in cement mortar(1:4) including pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed bed or beeding layers of 20 mm thick in CM 1:4 , complete all as specified and directed.
249
-
-
... More
M&L for Machine cut kota stone slab flooring one piece as in treads of steps 18-20mm thick over and incl 20 mm thick screed bed in CM 1:3 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all specified & directed.
804
-
-
... More
M&L for Kota stone slab 18-20mm thick ( One piece) in riser of steps, skirting, dado and pillar laid over and incl 15mm thick backing coat in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete, all as specified and directed by Engr-In-Charge.
180
-
-
... More
Rounding to edges of stone slabs one edge , such as in steps, cooking platform and other similar situations, complete, all as directed by Engr-In-Charge.
375
-
-
... More
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles
384
-
-
... More
M&L for Brickwork with fly ash old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6, complete, all as specified and directed by Engr-In-Charge.
371
-
-
... More
M&L for Brickwork with fly ash old size bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4, complete, all as specified and directed by Engr-In-Charge.
76
-
-
... More
M&L for rendering dubbing coat over damaged irregular surface of walls/chajjas/ roof projections/ ceiling/ facia etc average 15mm thick in cm 1:4 over cement slurry @ 3 Kg/sqm, making the surface even followed by 5mm thick rendering in CM 1:3 finished even & smooth including making of drip course including necessary form work wherever required and applying three coats of White wash incl taking down/roughening surface of old surfaces by picking sweeping clean and washing with water, complete, all as specified and directed by Engr-In-Charge. Note : Quoted rate shall include rate for form work wherever required.
1204
-
-
... More
Taking down cement plaster on brick or stone walls,ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc
44967
-
-
... More
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in two coat, first coat with 10mm thick in cement plasterr 1:6, finished fair and even and second coat with 5 mm thick in cement plaster 1:4 mixed with water proofing compound as per manufacturer's instruction, finished even and smooth without using extra cement, on wall surfaces, complete, all as specified and directed by Engr-In-Charge. (WPC Shall be measured & paid seperately)
17162
-
-
... More
M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces of wall surfaces, in cement mortar 1:6, finished even and smooth without using extra cement, complete, all as specified and directed by Engr-In-Charge.
18418
-
-
... More
M&L for rendering 5mm thick on concrete surfaces in ceiling in cement mortar 1:3, finished even and smooth without using extra cement, complete, all as specified and directed by Engr-In-Charge.
2318
-
-
... More
M&L for 50 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified & directed. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).
1471
-
-
... More
S&F MS Joist, channel, angle, or tee sections , fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming to Fe 410 -W Gde-E- 250) quality-A complete all as specified and as directed by Engineer-in-charge.
250
-
-
... More
M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
100
-
-
... More
M&L for guniting for shortcrete 1 :2 (CM) mixed with epoxy resin and hardner (manufactured by FOSROC/MC BAUCHEMIC /CICO/PIDILITE) @ 2% by weight of cement in equal proportion using short crete pumps and allied equipment,in thickness 30 mm all as per manufactureres instruction. (Upto 5 mtr height) including necessary chiping/taking down loose concrete along with application of rust remover for old rusted bars and rebar if required followed by application of anti corrosive paint over old /rebar as per manufacturers instruction complete all as specified and directed.
1250
-
-
... More
S&F mild steel welded fabric of weight not exc 4kg/Sqm, fixed to steel members with spikes, complete, all as specified.
3125
-
-
... More
M&L for treatment of sunken floor slab comprising of the following specifications with and including demolition of sunken floors complete all as specified and directed by Engineer-In-Charge:-
(i) Cleaning the sunken/lowered portion of RCC slab surface (incl vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely and providing 40 mm thick avg PCC 1:2:4 type B-O using 12.5mm graded crushed stone aggregate as in padding concrete to achieve proper slope incl cutting holes in bricks or in RCC wall for spout.
(ii) Rendering of uneven surfaces with 6mm thick in CM 1:4 mixed with and incl integral water proofing compound Sika Plastocreat plus or equivalent make in Fosroc/Thermax as approved by GE @ 0.2% by weight of cement or as per manufacturer's instructions incl filling it with water to check dampness and seepage and where dampness/seepage is noticed, nozzles shall be fixed and grouting carried out.(iii) All junctions points of side wall where CI/GI/PVC pipes are passing through shall be sealed with epoxy putty Sikaguard 694 F(I) or equivalent make in Fosroc/Thermax as approved by GE. (iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean
94
-
-
... More
(v) Applying two coats of polymer modified cementious water proof coating with Sika Topseal 107 or equivalent make in Fosroc/ Thremax as approved by GE over base coat as per manufacturer's instruction to bottom and vertical sides upto finished floor level +100 mm height. The thickness of two layers shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vetical and bottom surface of the sunken portion.
(vi) Plastering of bottom surface and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with and incl integral water proofing compound Sika Plastocreat plus or equivalent make in Fosroc/Thermax as approved by GE @ 0.2% by wt of cement consumed or as per manufacturer's specification incl rounding of corners & injuctions sloping towards spout.
(vii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6, type C1 all round after painting with anticorrosive paint. (viii) The sunken floor shall be fixed with lean concrete 1:7:12, type F2 using 40mm graded stone aggregate. Note :- Test the water proofed area (ponding test) by filling water for atleast 72 hours and tested for leakage/seepage and to the entire satisfaction to GE. Test record for each sunken slab shall be maintained. The treatment shall be carried out by authorised applicators of chemicals. Cost of testing and all M&L is included in the rates quoted above.
-
-
-
... More
Supply only integral water proofing compound conforming to IS: 2645.
3392
-
-
... More
Dismantling brick/concrete tiles, any size etc incl existing roof treatment of any thickness .
415
-
-
... More
Demolition of mud or bricks in roofs, any thicknees and in any position and leaping over roof terrace, removing the demolished material to a distance exc 250 m but not exc 500 m and depositing where directed at a lavel not exc 1.5 m above starting point ,complete, all as specified and as directed by Engr-In-Charge.
415
-
-
... More
M&L for providing, cement concrete 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in coping, coving, roof padding, padding in sunken slab, complete, all as specified and directed by Engr-In-Charge.
106
-
-
... More
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces of wall surfaces, mixed with water proofing compound as per manufacturer's instruction, finished even and smooth without using extra cement, on wall surfaces, complete, all as specified and directed by Engr-In-Charge. (WPC Shall be measured & paid seperately)
4739
-
-
... More
M&L for water proofing treatment with APP modified bituminous membrane 3mm thick consisting of the following for RCC roof:-
(a) Cleaning plastered roof surfaces and applying a coat of Oxidised bitumen based solvented primer @ 0.4 Kg/Sqm of approved make on top of dry surface of RCC roof complete all as specified and directed.
(b) M&L for APP modified polymeric waterproofing membrane 3mm thick with non woven polyster core of approved make applied by heating one surface of membrane with LPG torch with lap of 100mm and the overlap shall be seated by flame complete all as per manufacture instructions and as directed.
4739
-
-
... More
M &L for Cement concrete tiles 25cm x 25cm x 22 mm thick, machine pressed, set, jointed and pointed in neat cement slurry in floors/roof over and including 20 mm thick screed bedding layer in CM 1:4, complete, all as specified and directed by Engr-In-Charge.
4119
-
-
... More
Taking up or down steel tubing and connections,15 mm bore complete all as specified and directed.
1149
-
-
... More
Taking up or down steel tubing and connections , 20 mm bore complete all as specified and directed.
3293
-
-
... More
M&L for cutting chasing in bricks/walls or concrete surfaces for GI tubing 15/20mm bore including making good with cement mortar 1:3, cutting not exceeding 10cm girth, complete, all as specified and as directed by Engineer-in-charge
1149
-
-
... More
M&L for 15 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
1149
-
-
... More
M&L for 20 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
3293
-
-
... More
Taking down eaves gutters and rain water pipes, soil, waste and vent pipe ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning for refixing ( measured overall as fixed along the centre line over fittings and accessories) complete, all as specified and directed.
1365
-
-
... More
S&F 110 mm bore PVC (SWR) pipes of pressure rating 6kg/per sqcm, single socketed, in any length with rubber ring joints, fixed to walls, complete, all as specified and as directed by Engineer-in-Charge.
267
-
-
... More
S&F 75 mm bore PVC (SWR) pipes of pressure rating 6kg/per sqcm single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete, all as specified and as directed by Engineer-in-Charge.
115
-
-
... More
S&F 75 mm bore PVC (SWR) pipes of pressure rating 6kg/per sqcm single socketed, in any length with rubber ring joints, fixed to walls, complete, all as specified and directed by Engineer-in-Charge
988
-
-
... More
S&F 110 mm bore PVC (SWR) bends, any radius with oval access door, complete, all as specified and directed by Engineer-in-Charge
152
-
-
... More
S&F 75 mm bore PVC (SWR) bends, any radius with oval access door, complete, all as specified and directed by Engineer-in-Charge.
156
-
-
... More
S&F 110 mm bore PVC (SWR) junction , single T equal or unequal, complete, all as specified and directed by Engineer-in-Charge
76
-
-
... More
S&F 75 mm bore PVC (SWR) junction , single T equal or unequal complete, all as specified and directed by Engineer-in-Charge
76
-
-
... More
M&L for 110 mm bore PVC (SWR) vent cowl complete, all as specified and directed by Engineer-in-Charge
76
-
-
... More
S&F 50 mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors or fixed to wall for spout etc complete including taking down old pipe complete, all as specified and directed by Engineer-in-Charge.
59
-
-
... More
M&L for Bands, straps, supports or stays, for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed .
106
-
-
... More
S&F in repairs bib taps cast copper alloy with screwed down for iron pipe or brass ferrule and fixed, fancy type, chromium plated for 15 mm bore pipe.
888
-
-
... More
S&F in repairs stop cock angle type cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipe (chromium plated) for 15mm bore pipe.
588
-
-
... More
S&F in repairs 600mm x 450 mm bevelled edge mirror of selected quality, not less than 5mm thick, mounted on 6 mm thick AC plain building board or commercial plywood and fixed to wall on wooden plugs with chromium plated brass screws and cup washers, complete, all as specified and directed by Engineer-in-Charge
152
-
-
... More
S&F in repair fancy type stop cock cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipe chromium plated (concealed type) for 15mm bore pipe.
152
-
-
... More
S&F in repair vitreous china squatting pan “orrisa” pattern of size 580mmx 440mm “white” with integral foot rest (excluding flushing cistern and flush pipe) including provision of lime concrete bedding, connection to trap and to flushing pipe, anti-syphonage pipe etc complete making good to floor complete all as specified and as directed by Engineer-in-charge.
152
-
-
... More
S & F in repairs PVC flushing cistern of 10 ltr capacity valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including flush pipe of 32mm bore MS chromium plated and connection to pipes etc complete all as specified and directed by Engineer-in-charge.
152
-
-
... More
S&F in repair SS Sinks with drainage board made of stainless steel 1.0 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm
Note:- Supply of waste pipe & waste coupling will be paid separately under repective items.
152
-
-
... More
S&F in repairs vitreous china wash hand basin white flat back size 550 x 400 mm excluding taps waste chain and plug but including bracket , complete all as specified and directed by Engineer-in-Charge.
152
-
-
... More
S&F in repair brass chromium plated shower rose of 125mm size complete
152
-
-
... More
S&F Shower arm 15mm size 195mm long with bend of 45 degree with flange of CP any colour (minimum weight 40 gms)
152
-
-
... More
S& F in repair PVC connection best quality with PTMT nuts 450mm long.
608
-
-
... More
S&F in repair for chromium plated central hole basin mixer for mixing hot & cold water for WHB complete all as specified and directed
152
-
-
... More
Dismantling old water tanks and removing to store exc 500 & nexc 1000ltrs.
152
-
-
... More
S&F 750 Litre capacity Rotational moulded polyethylene water storage tanks, white colour, triple layered (cylindrical vertical with closed top) , hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.
152
-
-
... More
M&L for PCC (1:3:6) type C-2 with using 40mm graded crushed stone aggregates including necessary form work as in platform for PVC tank, complete all as specified and directed by Engineer-in-Charge.
25
-
-
... More
S & F for 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed of (minimum weight 210gm) complete all as specified and as directed by Engineer-in-Charge.
152
-
-
... More
S&F 32mm bore waste fittings, brass, chromium plated for basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed
152
-
-
... More
S&F 40 mm bore waste fittings, brass, chromium plated for sinks, with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed
152
-
-
... More
S&F 20mm GI nipple suitable for HDPE water tank.
152
-
-
... More
S & F 32mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fittings, fixed to WHB, sink etc complete.
304
-
-
... More
M&L for preparation of new wooden surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete, all as specified and directed by Engineer-in-Charge.
3552
-
-
... More
M&L for preparation of new steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer complete, all as specified and directed by Engineer-in-Charge.
918
-
-
... More
M&L for preparation of old or previously treated steel surfaces of any description, over 10cm in width or girth and applying one coat of synthetic enamel paint complete, all as specified and directed by Engineer-in-Charge.
130
-
-
... More
M&L for applying two coats of oil bound distemper using mechanised Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer as mentioned in Particular Specifications and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface over a coat of acrylic water based interior grade primer @ 0.9 ltr (undiluted)/10 sqmtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats incl applying waterproof cement based putty @ 1 Kg (undiluted) per sq mtr. of average thickness 1 mm, of approved makes over the plastered wall after scrapping to prepare the surface even and smooth complete
11111
-
-
... More
and sanding of the putty surface with Wall Sander machine (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7"/9" to make the surface free from dust etc. by skilled labour complete all as specified and directed. Steps for application of putty:-
Step 1) Mix the putty powder by adding 40-50% water and mix it with approved Putty Mixer (Putty mixer with min 1400 W power having mixer rod of industrial steel grade 45 with the mixing capacity of min 2.5 kg putty per minute)
Step 2) Apply the first coat the prepared mixer with the help fully automatic airless spray machine
of putty application of mechanised Spray Machine with max 6 ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041"
Step 3) Allow 6-8 hrs time to dry the putty surface
Note: - (a) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application). complete all as specified and directed.
-
-
-
... More
M&L for Complete removal of existing treatment on wall/ roof projections including facia,cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust,loose paint etc by skilled labour and applying two coats of oil bound distemper using mechanised Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer as mentioned in Particular Specifications and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface over a coat of acrylic water based interior grade primer @ 0.9 ltr (undiluted)/10 sqmtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats incl applying waterproof cement based putty @ 1 Kg (undiluted) per sq mtr. of average thickness 1 mm,
6804
-
-
... More
of approved makes over the plastered wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with Wall Sander machine (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7"/9" to make the surface free from dust etc. by skilled labour complete all as specified and directed. Steps for application of putty:-
Step 1) Mix the putty powder by adding 40-50% water and mix it with approved Putty Mixer (Putty mixer with min 1400 W power having mixer rod of industrial steel grade 45 with the mixing capacity of min 2.5 kg putty per minute)
Step 2) Apply the first coat the prepared mixer with the help fully automatic airless spray machine
of putty application of mechanised Spray Machine with max 6 ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041"
Step 3) Allow 6-8 hrs time to dry the putty surface
Note: - (a) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application). complete all as specified and directed.
-
-
-
... More
M&Lfor applying three coat of white wash on ceiling including preparation of new plaster surface, complete, all as specified and directed by Engineer-in-Charge.
2318
-
-
... More
M&L for complete removal of white wash from ceiling surfaces and applying three coat of white wash including preparation of surface complete all as specified and directed.
4633
-
-
... More
M&L for preparation of newly plastered or unplastered surface of wall and applying three coats of white washing complete all as specified and directed.
7307
-
-
... More
M&L for Cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in in surface channel and drains, complete, all as specified and directed by Engineer-in-Charge.
35
-
-
... More
Extra for forming fair finished drain or channel of manholes inner girth n exc 30cm in cement concrete using extra cement including forms mould mitred stopped ends etc all as specified & directed.
520
-
-
... More
Supply & providing 25mm thick precast cement concrete type B0, 1:2:4 using 12.5mm graded crushed stone aggregate louvres and jallies, set in CM (1:4) (measured solid) including all mouldings and frame,complete, all as specified and directed by Engineer-in-Charge.
78
-
-
... More
Supply & providing precast cement concrete 1:2:4, type B1(using 20mm graded stone aggregate) as in manhole cover slab with plain fair faces and set in cement mortar 1:4, complete, all as specified and directed by Engineer-in-Charge.
12
-
-
... More
S&F 18 MM thick PVC Celuka board of plain white color both side fixed with screws, solvent cement/ adhesive to make kitchen cabinet/cupboard sides, top and bottom and shelves inside the cabinets, cupboard shutters/frames (Density- 575 to 600 Kg/ CBM),complete, all as directed by Engineer-in-Charge.
1165
-
-
... More
S&F 18 MM thick PVC Celuka board of single side prelam/rigidlam color fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinet, cupboard shutters/frames, (Density- 575 to 600 Kg/ CBM), complete, all as directed by Engineer-in-Charge.
1669
-
-
... More
S & F auto closing hinges 35 mm size of 0 crank OR 8 crank openable at 110 degree for kitchen cabinet shutters, of stainless steel grade SS-304, bright finish or electro galvanised complete as approved by GE.
Make: Kaff / Hettich / Hafele/ Godrej
608
-
-
... More
S&F Continous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap 40mm, complete all as specified and directed.
1097
-
-
... More
S&F stainless steel handles 100 mm size for kitchen cabinet shutters/ cupboard complete all as specified and directed.
1216
-
-
... More
S&F magnetic catcher of size 20mmx50mm suitable for kitchen cabinet shutters/ cupboard, complete all as specified and directed. Make: Kaff / Hettich / Hafele/ Godrej
1216
-
-
... More
S & F Ball bearing runners 45 mm size Telescopic full extension load capacity 50 kgs, of stainless steel grade SS-304 complete as approved by GE.
Make: Kaff / Hettich / Hafele / Godrej
304
-
-
... More
S&F stainless steel Kitchen plate rack of overall minimum size 900mm x 900, with partitions for small/large plates etc made out of stainless steel sheet 0.8 mm thick , fixed with rawl plug and CP steel screws all as directed. Note : Weight of rack shall not be less than 7.00 Kg/Each.
152
-
-
... More
M&L for cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), dia of outlet 75 mm, complete all as specified and directed.
228
-
-
... More
M&L for cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), dia of outlet 75 mm, complete all as specified and directed.
228
-
-
... More
S&F in repair soap dish,chromium pated,fixed to plugs with chromium plated brass screws complete all as specified and directed.
152
-
-
... More
Taking down shutter of any description exc 1 sqm but n. exc 2 sqm each complete all as specified.
50
-
-
... More
M&L for preparing new plastered surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having excellent protection against UV, Alkali & Fungal resistance, exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm. of approved colour approved make with low VOC less than 50, Anti Alkali & fungal properties in two coats applied with fully automatic airless spray machine which shall be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer as mentioned in Particular Specifications and accessories having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint with 6 years performance warranty from manufacturer of approved make complete all as directed.
17162
-
-
... More
Dismantling of Stone slabs and tiles of anydescription or thickness in floors, aprons etc. laid bedded and pointed in any mortar
58.23
-
-
... More
M&L for two component elastomeric acrylic polymer modified cementitious waterproofing coating of approved manufacturer having 80 % elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications. Sprinkle sand at 10-15 gram per sqft for better grip with plaster, complete, all as directed.
4980
-
-
... More
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition complete all as specified and directed
2
-
-
... More
M&L for 50 mm thick sand stone slab as in chajja/cover slab set and jointed over supports in CM (1:4) complete all as specified & directed.
400
-
-
... More
M&L for Mild steel TMT bars 6 to 8mm dia cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified.
2
-
-
... More
M&L for RCC (nominal mix) 1:2:4 uing B-1 (20 mm graded stone aggregate) as in chajja complete all as specified and directed.
2
-
-
... More
Formwork to soffits of chajjas and such as roof slabs, landings and similar work: not exceeding 200 mm thick (Horizontal or sloping), complete, all as directed.
40
-
-
... More
Formwork to edges of concrete flats, floor slabs, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc. 5cm but n exc. 10cm wide, complete, all as directed.
40
-
-
... More
M&L for Cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in roof kerb, coping, benching, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating, incl necessary form work wherever required,complete, all as specified and directed by Engr-In-Charge.
14
-
-
... More
M&L for 75 mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in sub base, complete, all as specified and directed by Engr-In-Charge.
2770
-
-
... More
M&L for factory made pre polished rubber moulded chequered cement concrete tiles, 30cm x30cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement & pigment, over & including 20mm thick screed bed in cement & sand mortar 1:4, complete, all as specified & as directed.
1120
-
-
... More
Supply and laying 60mm thick factory made chamfered edge cement concrete interlocking paver block of M-35 grade confirming to IS 15658-2006 with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including minimum 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete, all as specified & directed.
1650
-
-
... More
S&F 5 mm thick figured glass, pin head type and glazing with rubber beading/ putty/ wooden beading as required in squares n exc 0.5 sq. m in each pane fixed with ventilator shuttter complete all as specified.
150
-
-
... More
S&F in repairs 20mm bore gun metal globe or gate valve confirming to IS:778, ISI marked with iron wheel head, screwed both ends for iron pipe including GI fittings, socket, nipple, union as well cutting of pipe and necessary earth work, complete, all as specified & directed.
152
-
-
... More
M&L for applying chemical compound with dispersing agents Removing (and not damaging the beneath brick or RCC surface) old existing unserviceable concrete, cement plaster, loose / unsound weaken cement of any description and in any position from existing external / internal surfaces of walls, or any surface average depth 5-25mm (Approx height 4.5 m from natural ground level) with concrete removing agent(except for zinc and galvanised metal) and clean the treated surface immediately after removal treatment, and removal up to the approval municipal dumping grounds specified by the local bodies outside MOD land including cutting of all edges, making square shoulders of the cavities, roughening the smooth surfaces, scrapping out / removing corrosion all loose / scale/ rust etc from the visible unplastered surface.
Note-: This item shall be executed by authorised agency, Contractor shall submit the MOU with authorised applicator of manufacturer.
1500
-
-
... More
Cleaning all existing reinforcement bars with wire brush/rotary wire brush to make entire surface of bars free from loose torn metallic parts, loose material, dirt etc. and M&L for applying alkaline Antioxydizing agent on the existing rebars and allowing it to react with damaged metal and form a corrosion resistant, insoluble protective layer, as per manufacturer's instructions, including necessary scaffolding, props etc. complete all as specified and as directed. (Mode of measurement: per sqm of breaking area of concrete.)
Note-: This item shall be executed by authorised agency, Contractor shall submit the MOU with authorised applicator of manufacturer.
1500
-
-
... More
Providing and applying Zinc rich epoxy anti-corrosive protective coating for reinforcement bars as corrosion protection system in 2 coats to the entire circumference surface of bars as specified and directed by Engr-in-charge. The product should confirm carbonation resistance of 2 mm and bond strength 1N/sqmm according to ASTM C 882-78 (Mode of measurement: per sqm of application area of concrete.) complete all as specified and as directed. The rate shall include cost of scaffolding necessary for the work.
Note-: This item shall be executed by authorised agency, Contractor shall submit the MOU with authorised applicator of manufacturer.
1500
-
-
... More
Providing, mixing & applying two component epoxy resin concrete bonding coat on prepared RCC surfaces prior to application of any type of repair mortar or microconcrete as per manufacturer's specification including cleaning of surface to remove all dirt, dust or any other impurities, etc. including necessary scaffolding work, all complete as specified and directed. The product should comply with ASTM C 881 Type II Grade 2 Class B+C.
Note-: This item shall be executed by authorised agency, Contractor shall submit the MOU with authorised applicator of manufacturer.
1500
-
-
... More
M&L for mixing mechanically PP fibre of 12 mm length with Anti-crack strength in redymix repair mortar with suitable care to ensure dispersion of fibres conforming to ASTM C 1116/C, 1116M-10a 4.1.3 type3 & BS EN14889-2.2006 and providing 10mm thick one component chloride free thixotropic fibre reinforced polymer modified repair mortar at external brick wall with ASTMC109 with flexural strength ASTMC 348 @ 7days meeting 7N/mm2 and tensile strength @ 7 days (ASTM C 307) 3 N/mm2 in cement mortar in the ratio 1:4 mixed with styrene butydiene polymerized cement mortar modifier or AR for bonding with cementious mortar specially adhered to BS6319 having specific gravity of 1.025 to1.04, minimum 43% solid contents) not less than 2% by weight of cement and as per manufacturer’s Instructions for external columns or any RCC wall surface etc.
Note-: This item shall be executed by authorised agency, Contractor shall submit the MOU with authorised applicator of manufacturer.
1500
-
-
... More
M&L for curing of the surface using wax based Concrete curing compound CC 75 curing efficiency;
CC75 complies with the internationally recognized ASTM C309-90 standards incuding all toolsand tackles.
Note-: This item shall be executed by authorised agency, Contractor shall submit the MOU with authorised applicator of manufacturer.
1500
-
-
... More
Taking down surface/ conceled aluminium point wiring (light,bell,fan,socket or power) complete, including fixtures and fittings such as switches, ceiling roses, lamp holders, pendants, sockets, regulators, tubelight fittings etc and making good disturbed surfaces walls, floors etc complete.
5277
-
-
... More
M&L for point wiring with 1100 volts grade PVC insulated FRLS-H multistranded copper conductor cable 1.5 sqmm (Phase-Red& Neutral-Black) and earth continuity conductor 1.5 Sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20mm bore, ISI marked ivory colour with all conduit fittings/fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.2mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches as required for the following:-
-
-
-
... More
One light point controlled by one, one way switch
2163
-
-
... More
One fan/exhaust point controlled by one, one way switch
834
-
-
... More
One light point controlled by two, two way switches
78
-
-
... More
One bell point controlled by one bell push.
152
-
-
... More
One 3 pin socket outlet 5 Amps point controlled by one switch on the same board with other switches.
682
-
-
... More
One 3 pin socket outlet 5 Amps point controlled by one switch on independent board.
608
-
-
... More
M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.50 sqmm (Phase-Red & Neutral-Black) and earth continuity conductor 2.50 Sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20mm bore ISI marked ivory colour with all conduit fittings/fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.2mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches as required for one light point controlled by one switch on 16 Amp independent board, complete all as specified and as directed by Engineer-in-charge.
456
-
-
... More
M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4 sqmm (Phase-Red & Neutral-Black) and earth continuity conductor 4 Sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20mm bore ISI marked ivory colour with all conduit fittings/fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, socket as required for on 16 Amps socket outlet point controlled by one switch on independent board, complete all as specified and as directed by Engineer-in-charge ( For Geyser & AC).
304
-
-
... More
S&F Switch, flush type single pole, one way 6 Amp complete all as specified and directed.
4287
-
-
... More
S & F flush type, single pole, two way 6 Amp switch complete all as specified and directed..
156
-
-
... More
S & F Bell push, flush type, 6 Amp 240 Volts complete all as specified and directed..
152
-
-
... More
S & F Bell ding dong type, AC, 240 volts, single pole complete all as specified and directed.
152
-
-
... More
S & F Socket outlet 2 in 1, 3 pin, 6 Amp flush type complete all as specified and directed.
1290
-
-
... More
S&F Switch, flush type single pole, one way 16 Amp complete all as specified and directed.
456
-
-
... More
S & F Socket outlet 2 in 1, 3 pin, 6 and 16 Amp flush type complete all as specified and directed.
456
-
-
... More
S & F angle holder insulated polycarbonate body complete all as specified and directed.
456
-
-
... More
S&F ceiling rose 63 x30mm three terminal,polycorbonate body complete all as specified and directed..
2467
-
-
... More
Supply and fix TV socket with mild steel sunken boxes with earth dully zinc coated and including mounting frame and over cover plate all as specified and directed by Engineer-in-charge.
152
-
-
... More
S & F LED (1.2 M) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumen/20 watt at a minimum system efficacy of 2000 lumen per 20 watt and total power consumption not more than 20 watt including driver of capacity 10 KA. it has a rated system life time of 25000 burning hours at L70 and should have a colour temperature of 6500 K, CRI80, THD10% AND PF0.95 complete all as specified and directed.
1442
-
-
... More
S&F LED bulb base B22 of capacity 10 watts not less than 700 lumens output at 6500K colour temp, complete all as specified and directed.
456
-
-
... More
S & F of LED (0.6 M)/ 2 ft, made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 1150 lumen/10 watt at a minimum system efficacy of 1150 lumen per 10 watt and total power consumption not more than 10 watt including driver of 5 KA capacity. it has a rated system life time of 25000 burning hours at L70 and should have a colour temperature of 6500 K, CRI80, THD10% AND PF0.95 complete all as specified and directed.
152
-
-
... More
S&F Security Light of 35 watts of new generation energy saving & environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection and impact resistance of IK07 with 10KV Built -in-Surge Protection Devision,should have a colour temperature of 6500 K, CRI80, THD10% AND PF0.95 including suitable pipe, clamps, nut and bolts for mounting the light all as specified and directed
39
-
-
... More
S&F LED bulk Head 10W HEXA environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head back-lit LED luminaire comprising of high brightness LEDs with all connected accessories all as directed and specified.
152
-
-
... More
M&L for concealed submain wiring with PVC insulated FRLS-H multistranded copper conductor cable of size 2x6.0 Sqmm drawing into and including rigid non metallic PVC conduit, medium grade not less than 25mm bore, ISI marked, ivory colour with all conduit fittings and fixing accessories and 6.0 Sqmm FRLS-H multistranded copper conductor cable as continuous earth wire including cutting chasing and making existing colour on the wall complete all as specified and directed. (Note :- Two runs of 6 Sqmm copper wire and one run of 6 sqmm copper earth wire alongwith PVC conduit shall be meausred as one unit)
5320
-
-
... More
Taking down carefully sub main wiring with PVC casing capping/PVC surface conduit and making good distrubed surface to match the existing complete all as specified and directed.
5320
-
-
... More
Taking down MCB distribution board with incoming and outgoing controls any make and capacity after disconnecting, complete, all as specified and directed.
152
-
-
... More
Taking down old unserviceable indoor type panel of any capacity complete all as specified and directed.
39
-
-
... More
S&F factory made, vertical distribution board TPN 4 way, double door type, protection class IP-42 suitable for mounting MCCB as incomer and SP MCB as outgoing and DBs conforming to IS-13032, IS-8623, BS-5484, complete, all as approved & directed.
39
-
-
... More
S&F factory made, sheet steel distribution boards double door, protection class IP-42 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 100 Amps rating copper bus bar, SP& N 8 Ways, complete, all approved & directed.
152
-
-
... More
S & F MCBs of 'C' series SPN 40-63 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete Legrand Cat Part No 408628-36 or equivalent Cat Part No. from Make specified in Appendix 'B', complete all as approved and directed.
304
-
-
... More
S&F MCB, 415V, 10KA 'C' curve 40-100 Amp TPN with connection, testing and commissioning as directed by Engineer-in-charge.
39
-
-
... More
S & F MCBs of 'C' series single pole 6 to 32 amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete Legrand Cat Part No 408587-95 or equivalent Cat Part No. from Make specified in Appendix 'B' all as specified and directed. all as specified and directed.
912
-
-
... More
M&L for making of hole in brick wall including removal of dismantled materials, making good disturbed surface, platering, making holes fixigng bolts suitable for fixing 10" exhaust fan frame, complete, all as directed.
152
-
-
... More
M&L for making of hole in brick wall including removal of dismantled materials, making good disturbed surface, platering, making holes fixing bolts suitable for fixing 12" exhaust fan frame, complete, all as directed.
152
-
-
... More
S&F in replacement modular power unit of 20 Amps 240 Volts including metal flux box & cutting chasing in wall & making good surface all as specified and directed by Engineer-in-charge. C& S Cat Part No-CG26402PW (For AC & Geyser)
304
-
-
... More
Supply, installation and commissioning (maximum energy efficient type) Water heater storage type, five star electric complete of capacity 25 litres, heating element capacity 2 KW, vertical, plastic body including grouting of studs in wall in cement mortar (1:3) nuts, washers and provision of two numbers heavy duty flexible SS connection pipe of hot and cold of 600 mm long with brass nuts and two number brass chromium plated angular valve suitable for 15 mm bore pipe for water supply connection complete all as specified and directed.
152
-
-
... More
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm including grouting of frame in wall and connecting with and including 3 run 1.5 Sq mm single core, PVC insulated but unsheathered FRLSH multistranded copper conductors cable from ceiling rose to exhaust fan, complete, all as specified and directed.
152
-
-
... More
S&F exhaust fans 300 mm sweep metallic body, heavy duty, four blade, double ball bearing, 1400 RPM, minimum air delivery discharge 1710 CMH suitable for SP, 230/250V, 50 Hz AC supply with protective bird guard with louver shutters including grouting of frame in wall and connecting with and including 3 run 1.5 Sq mm single core, PVC insulated but unsheathered FRLSH multistranded copper conductors cable from ceiling rose to exhaust fan, complete, all as specified and directed.
152
-
-
... More
M & L in replacement of Earthing complete with galvanized steel earth plate electrode 60cmx60cmx 6.3mm thick buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level, connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elecrical plate No 3 of MES SSR Part I connected to main DB or main control board all as specified and testing on completion including provision of earth wire portected by galvanised iron 40 mm bore light grade pipe with all fittings from the earth electrode fixed along pole with and including 25 x 6 mm flat iron clamp, bolts, nuts and washers and watering pipe shall be 20 mm bore GI medium grade from top of the earth electrode to bottom of the earth pit and earth electrode shall be surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides including all excavation and earth work in any type of soil and removal of soil upto 50 metre, PCC pit with pre-cast RCC cover with handle with 10mm dia, charcoal/salt, funnel, CI frame etc complete all as specified and directed
39
-
-
... More
S&F ceiling fans (5 star rated by Bureau of energy with service value of not less than 6.12) BLDC, (40 W+-10%), aerodynamically design blades made of compounded ABS to give air friction for silent operation, with air delivery 240 cum/min, rated speed 280 Rev/min, with or without remote complete with blades, down rods, electronic regulator and accessories, 230 volt, 1200 mm sweep, suitable for single phase supply with noise level 56 db, low voltage starting input voltage 140 V (Max) with power factor 0.95 all as specified & directed. Make: Crompton Greaves/Havells/Orient/Usha/ Khaitan
530
-
-
... More
S&F Rigid non-metallic PVC conduit of 25 mm size exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc, complete, all as specified & directed. (For TV Conduit)
2000
-
-
... More
M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete, all as specified & directed.
2000
-
-
... More
Taking down of smart prepaid meter with accessories & refixing the same after completion of surface work with nut, bolt etc as directed by Engr-in-Charge.
152
-
-
... More
M&L for concealed submain wiring with PVC insulated FRLS-H multistranded copper conductor cable of size 1x1.5 Sqmm drawing into and including rigid non metallic PVC conduit, medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings and fixing accessories including cutting chasing and making existing colour on the wall complete all as specified and directed. (For Inverter)
9120
-
-
... More
Taking down of unserviceable/burnt ceiling fan & depositing to E/M store as directed by Engr-in-Charge.
530
-
-
... More
Excavation in trenches not exe. 1.5 Mtr width and not exc 1.5 Mtr depth and getting out in hard / dense soil, for laying cables, pipes etc., complete all as directed, complete, all as specified and directed by Engr-In-Charge.
180.1
-
-
... More
Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick, complete, all as specified and directed by Engr-In-Charge.
144.8
-
-
... More
Removing excavated material to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete, all as specified and directed by Engr-In-Charge.
35.3
-
-
... More
Supply and laying approved dry river sand for cable cushioning in trenches to full excavated width at bottom and top of cable, gently punned down, complete all as specified and directed by Engineer-in-charge. Note: Punned thickness only shall be measured and paid.
19
-
-
... More
Supply only bricks slightly over burnt (kiln burnt) , old size bricks , best quality locally available , laid flat dry laid in trenches for cable protection all as specified and directed.
2
-
-
... More
Supply and laying in replacement of LT cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core, complete, all as specified and directed by Engr-In-Charge. Note: Sand & bricks (suuply only) for cable protection shall be measured and paid separately under respective items.
300
-
-
... More
Supply and laying in replacement of galvanised iron pipe 50mm bore light grade incl all fittngs for protection of UG cable, complete, all as specified and directed by Engr-In-Charge.
20
-
-
... More
M&L for drilling hole under road for laying of U/G cable through pipe of suitable size complete, all as specified and directed by Engr-In-Charge.
10
-
-
... More
M&L for 20 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings, fixed and laid in trenches/ floors complete all as specified and directed.
2280
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%