Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Automobiles and Auto Parts
Eprocure
Opening Date30 May 2023
Closing Date27 Jun 2023
Tender Amount₹ 45,00,000
Costs
EMD
₹ 90,000Document Cost
₹ 500Tender Fee
Refer Documents
Summary
8295 Repair / Maint Of Dg Sets Installation, Swimming Pool Installation And Allied Works And Comprehensive Maintenance Of Vehicle Under Ge (e) Bareilly.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_MES_599620_1Bid Award Id
ViewTender No
8295/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
(c) 20 KVA DG Set
1
-
-
M&L for conditioning of battery 12 Volt, upto 180 AH, to drain out distilled water, Acid and taking out damaged lead plates complete for replacing lead plates of suitable weight & size including filling fresh lead acid, distilled water, microporus seperater complete and testing.
5
-
-
M&L for conditioning of battery 12 Volt, upto 150 AH, to drain out distilled water, Acid and taking out damaged lead plates complete for replacing lead plates of suitable weight & size including filling fresh lead acid, distilled water, microporus seperater complete and testing.
8
-
-
M & L for taking out self starter 12/24 volt from the DG Set, transportation to workshop opening/disconnecting all internal connection, cleaning the same taking out burnt armature, segrigation of serviceable parts for re-use, rewinding of armature with copper wire of existing size. Reassembling the same with replacement of following items also:-
(a) carbon brush 01 set, (b) Beadex pinion 01 no, (c) Half clutch assy 01 No, (d) Field coil 01 No, (e) solonoid switch 01 No., (f) commitator 01 nos and refixing the self starter on the engine at site and testing on completion all as specified and directed.
8
-
-
Supply and fixing Battery terminal cable, copper conductor multi strand, unsheathed, single core 25sqmm, 1.5 mtr long fixed with copper terminals on both side suitable for 12 Volts & upto 180 AH/150AH battery.
10
-
-
M&L for dismentaling the unserviceable radiator for DG set of undermentioned capacity from engine, transportation to the workshop, repair the tank / storage portion incl necessary welding & making leak proof of the tank, cleaning the complete radiator with chemical agent and pumping set incl replacement of defective copper core and assembling the radiator including replacement of all old rusted MS nuts, bolts washers & gasket sets including refixing and testing complete for the following sets.
-
-
-
(a) 100 KVA to 125 KVA DG Set
2
-
-
(b) 63 KVA DG Set
4
-
-
20 KVA DG Set
1
-
-
M & L for dismentaling turbocharger assembly from the DG set of undermentioned capacity from engine, transportation to work shop for repair, cleaning and carrying out inspection of each components / spares segrigation of serviceable spares for reuse including Decarbonising machine, cutting, grinding polishing etc and re-assembling the Turbocharger with replacement of spare parts and refixing on existing position complete for the following sets.
(NOTE:- Spares required will be measured and paid separately under respective items).
-
-
-
(a) 100 KVA to 125 KVA DG Set
2
-
-
(b) 63 KVA DG Set
4
-
-
M & L for Taking out exhaust silencer box and pipe from the DG set, decarburizing and cleaning the silencer box including replacement of nut, bolts, washers clamp/bracket and refixing and wraping with asbestos rope and powder (NOTE :- Asbestos rope and powder will be included in same quoted rate under respective items.)
6
-
-
M & L for Dismantling of injector assembly of the DG set of under mentioned capacity from engine for repair, cleaning and overhauling of the same with necessary calibration including replacement of necessary repair item as required for the follwing set.
-
-
-
(a) 125 KVA DG Set
2
-
-
(b) 63 KVA DG Set
5
-
-
(c) 20 KVA DG Set
1
-
-
Supply only Injector kit in repair for incorporated to the injector assy.
4
-
-
M & L for replacement of unservicable parts with the new one, conforming to their respective part nos. for the follwing mentioned items after dismentaling the 100 to 125 KVA DG sets incorporated in the item No.1, and taking out the unservicable parts, for the following set :-
-
-
-
(a) Cylinder liner assembly
4
-
-
(b) Piston
4
-
-
(c) Piston Ring
4
-
-
(d) CR bearing
4
-
-
(e) Main bearing
4
-
-
(f) Head Gasket.
4
-
-
(g) Engine Gasket
2
-
-
(h) Engine Valve
2
-
-
(j) Valve Guide.
2
-
-
(k) Valve Seal
2
-
-
(l) Oil seal assembly
2
-
-
(m) Nozzle 'o' Ring
2
-
-
(n) Main Oil seal
2
-
-
(o) Fly wheel Ring gear
2
-
-
(p) Fan belt
2
-
-
(q) Copper Washer
4
-
-
(r) Hose pipe with clamps
4
-
-
(s) Teflon Oil seal
2
-
-
(t) Nut with bolt
4
-
-
(w) C R bush
4
-
-
(x) Thrust Washer
4
-
-
(y) Nozzle valve
4
-
-
(z) Fuel pipe (inlet & outlet pair)
4
-
-
(aj) Thermostate valve
2
-
-
(al) Radiator Fan
2
-
-
(am) Valve solenoid
2
-
-
(ap) LO Temprature Guage
2
-
-
(aq) LO Pressure Guage
2
-
-
(ar) Water Temp. Guage
2
-
-
(as) Air filter
6
-
-
(at) Lub oil filter
10
-
-
(au) Fuel filter
10
-
-
Supply only anti freeze radiator coolant (Make-HP/Servo/Castrol)
30
-
-
Replacement of old u/s automatic static battery charger system of 12 / 24 volts capacity including Amp meter, Volt Meter, Selector switch, Indicator lamp, fuse unit, rectifier, cord etc testing complete.
6
-
-
M & L for dismentaling and Taking out burnt/damaged coupling shaft fan from alternator of 63 KVA to 125 KVA DG Set and supply and fix Coupling shaft with complete assembly suitable for 125 KVA DG Set including cleaning and applying insulating material on existing winding of alternator and testing complete all as directed.
4
-
-
M & L for removing Alternator 415 V 3 Phase 4 wire system from engine both mechanically and electrically, transporting to local workshop, dismantling the alternator, removing the burnt out winding wire and rewinding of stator winding with same gauge copper wire and turn with "F" class insulation, varnishing, heating, drying, greasing the bearings and rotating parts and assembling back after aligning with engine including testing on load as directed for the following capacities :-
-
-
-
(a) 100 KVA to 125 KVA DG Set
2
-
-
(b) 63 KVA DG Set
5
-
-
M&L for Painting to the DG Sets of any capacities by prepration of old painted surfaces, cleaning & removing of existing rust grease oil spot etc,priming with aluminium red-oxide and then applying 1st grade of synthetic enamelled spray paint (two coat) of approved make, brand and colours (includes cost of paint) including fuel tank foundation base and panel board complete.
12
-
-
M & L for finding out defects of Fully Automatic Electric panel (AMF) of DG set and Taking out burnt interconnection wiring including u/s and serviceable components for reuse including Rewiring of panel using existing size of copper cable, ferrule, lugs, insulating material, nut bolt washer of various sizes refixing serviceable items including replacement of Contactor of any Model & amps capacity, 240 volt coil of any Make and Part No. and testing complete.
3
-
-
Supply and fix in repair of ignition switch with key for DG set Make : Minda or other equivalent make.
15
-
-
Supply only diluted sulphuric acid specific gravity 1250 for lead acid batteries.
10
-
-
Supply only distilled water for batteries in 5 litrs of can.
20
-
-
Supply and fixing for power contractor, 3 pole with AC coil, 415 V, 50 KW, 200 A and auxillary contract 2 No + 2NC complete.
Make ABB/L & T/Havells/Schiender
5
-
-
Supply & Replacement of Auto Voltage Regulator complete with wire connection and connected to existing field coil, 24 Volt, DC for cap of DG set 100 to 125 KVA Make- Kirloskar / Cummins after taking out the unserviceable one.
3
-
-
Supply & Replacement of Auto Voltage Regulator complete with wire connection and connected to existing field coil, 24 Volt, DC for cap of DG set 18 to 63 KVA Make- Kirloskar after taking out the unserviceable one.
6
-
-
M&L for Earthing complete with using GI earth plate electrode 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness off 15 cm all around the plate with using 4 mm dia GI Wire as earth lead moulded and retreived to earth plate at one end and connected to main switch / control board at another end with and including 15 mm dia GI light grade from upper end of earth plate upto external face of the wall of the building including 20 mm dia bore GI pipe light grade as water pipe from chamber to upper edge of the plate GI funnel with wire mess fixed on water pipe and provison of PCC 1:2:4 type B-1 (Using 20 mm Dia graded stone aggregate) duly reinforced with mild steel round bar 6 mm dia @ 150 mm c/c both ways with 10 mm dia mild steel bars as in lifting handle with and including necessarry excavation and earth work including laying the pipe concealed in floor / wall allas per plate NO-3 of SSR Part-I complete all as specified and directed and testing on completiopn (Note:- If the desired resistance is not found earthing shall be done by the contractor at no extra cost to Govt).
30
-
-
Supply only K Cool oil for DG set as approved by engineer in charge
20
-
-
Supply & Fixing in replacement for Speed contrl unit series ESD 5100 (Model No - IMPRORTED GAC ESD-5111) for DG set working voltag 12-32 Volt DC, out put current rang 0-5 Amps, speed sensor signal 0.5, 120 Volt AC RMS, operating Ambient teprange rang -40 degree to + 85 degree, relative humidity 95%, speed range 1k-7.5 kHZ, spped trim range ± 200 HZ, grass weight 0.65 kg complete oll as spesified and directed.
2
-
-
S&F DC alternator for battery charging complete oll as spesified and directed.
3
-
-
Repair/Maintenance of Swimming Pool and other allied works
M&L for complete overhauling and repairing of pressure filter capacity 2500 Cu M/hr including removal of chocked media from filter and depositing same with 30 m from plant room, scraping and cleaning of filter inside surfaces and re-painting with 3 black bituminous pant, cleaning of lateral pipes and recharging each filter with fresh filter media as follow :- i. Natural graded gravel of size 25mm - 20 mm : 150 mm layer: 68 Cu Ft
ii. Natural graded gravel of size 15mm - 10 mm : 100 mm layer: 45 Cu Ft
iii. Natural graded gravel of size 10 mm - 6 mm : 100 mm layer: 45 Cu Ft
iv. White graded coarse quartz sand 8 + 14 mesh : 100 mm layer: 45 Cu Ft
v. White graded coarse quartz sand 16 + 30 mesh: 600 mm layer: 22 Cu Ft
vi. Cleaning and repairing of under wash system including renewal of broken/defective unserviceable strainer/nozles. vii. Replacement of man holes & hand holes gaskets, painting exterior surface with synthetic enamel of approved shades
viii. Scraping cleaning / making internal and external shell of filteration plant neat and tidy and painting internal surfaces with two coats of anti corrosive black bituminous lead free paint over a coat of primer and externally with two coats of synthetic enamel paint over one coat of primer with sprayers and wiritng description of filteration plant complete all as specified and directed.
2
-
-
Supply & fixing gate valve ISI marked sutiable for pressure of system of size 20 mm nominal bore complete all as specified and directed
5
-
-
M&L for replacement of 300 mm bore MS Pipe includngn dismantling and welding with flanged end class A complete all as specified and directed.
30
-
-
M&L for soda ash as directed by Engr in Charge
500
-
-
M&L for Bleaching powder as directed by Engr in Charge
2000
-
-
M&L for copper sulphate as directed by Engr in Charge
500
-
-
M&L for Alum Crystal as directed by Engr in Charge
1200
-
-
M&L for Calcium based granular disinfectant for water treatment, Packing in 45 Kg, plastic drums complete all as specified and directed.
40
-
-
M&L for dismantling of non clog type centrifugal pumping set of capacity 12.5 HP either fixed on floor or on trolley mounted and taking out unserviceable spares and performing following operation to complete the task :-(a) rewinding of motor centrifugal pumping set with insulated copper winding wire including sleeves as per original company and replacement of worn out parts, including grinding & polishing of rotor sleeves and refixing, testing & transport charges complete all as specified & directed. (b) replacement of motor bearing with lock nut -02 Nos. (c) replacement of fan motor-01 No. (d) replacement of star couling set with rubber -01 each. (f) replacement of impellor with key -01 No (g) replacement of gland coupling -01 No
2
-
-
M&L for dismantling of centrifugal pumping set of capacity 25 HP and taking out unserviceable spares and performing following operation to complete the task :-(a) rewinding of motor centrifugal pumping set with insulated copper winding wire including sleeves as per original company and replacement of worn out parts, including grinding & polishing of rotor sleeves and refixing, testing & transport charges complete all as specified & directed.(b) replacement of motor bearing with lock nut -02 Nos. (c) replacement of fan motor-01 No.(d) replacement of star couling set with rubber -01 each.(f) replacement of impellor with key -01 No (g) replacement of gland coupling -01 No
4
-
-
M&L of Opening of electric and pipe connection of pumping set 3 phase, 3 HP to 7.5 HP including transportation of the same to and fro civil wkshp for the works :- (a) Dismantling of motor, taking out old burnt winding wire from stator, cleaning the all slots properly, rewinding of motor with super enamelled copper winding wire of required guage, varnishing the same including baking with proper temperature and providing insulation and packing proerly. Re-assembling the motor with proper testing by meggar fixing with the pump and installed at its position and testing the same as directed.
2
-
-
De watering of well up to 26' feet deep and up to 8 mtr dia by portable pumping set and taking out manually waste material like sludge,mud,soil,sanitory material and other dirts etc from inner sump and outer housing sump by using labour/equipment and depositing the same waste material at low lying area by digging pits all as, Cleaning and washing the surface area of sump well with wire brush and removing the algae growth including removal of grass/tree roots inside sump and above surrounding area etc all as specified and directed .
4
-
-
M&L for taking out unserviceable submersible pumping set of cap 7.5 HP to 20 HP complete with column pipe any capacity and any type from existing bore well carefully without damaging the p/set including connecting parts and lowering the same after repair including provision of suitable size of nut & bolts with washer and suitable packing for column pipes and connection of submersible cable complete all as directed. (Parts for following items shall be paid under relevent item here-in-after under as supply).
NOTE: (i) Chain pully block and clamps etc shall be provided by the contractor. (ii) Necessary safety pracaution will be responsibility of the Contractor.
4
-
-
M&L for rewinding of submersible motor with insulated copper winding wire including sleeves as per original company and replacement of worn out parts, including grinding & polishing of rotor sleeves and refixing, testing & transport charges complete all as specified & directed.
-
-
-
(a) 12.5 HP motor
2
-
-
(b) 7.5 HP motor
2
-
-
Supply & replacement of Single Phase Preventor for 7.5/12.5/20 HP submersible pumping set motor complete all as specified & directed.
Make-Minilec/Havells/Surya.
4
-
-
Supply & replacement of overload protection relay for FASD starter ranging 10-25 Amp Make-L&T/Havells.
4
-
-
Supply & replacement ML 1.5 Contactor suitable for 12.5 HP submersible pumping set as directed.
Make- L&T, Havells
4
-
-
Supply of following items for various submersible pumping set :-
-
-
-
(a) Bowl bush for 5.0/7.5HP
4
-
-
(b) Bowl bush for 12.5/20HP
4
-
-
(c) Impeller for 5.0/7.5 HP
4
-
-
(d) Impeller for 12.5/20 HP
4
-
-
(e) Neck ring for 5.0/7.5 HP
4
-
-
(f) Neck ring for 12.5/20 HP
4
-
-
(g) Shaft sleeve for 5.0/7.5 HP
4
-
-
(h) Shaft sleeve for 12.5/20 HP
4
-
-
(i) Pump shaft for 12.5/20 HP
4
-
-
(j) Coupling for 12.5/20 HP
4
-
-
(k) Coupling key for 12.5/20 HP
4
-
-
(l) Impeller key for 5.0/7.5 HP
4
-
-
(m) Impeller key for 12.5/20 HP
4
-
-
(n) Stud with nuts
4
-
-
(o) Thrust bearing for 12.5/20 HP
4
-
-
(p) Lower housing bush for 12.5/20 HP
4
-
-
(q) Upper housing bush for 12.5/20 HP
4
-
-
(r) Rotor shaft sleave for 12.5/20 HP
4
-
-
(s) CI Bowl for 12.5/20 HP
4
-
-
(t) Rotor Shaft for 12.5/20 HP
4
-
-
Supply and laying of 150 mm bore centrifugally cast (Spun) ductile iron pressure pipe with spigot & socket end, class K-9 in any length laid in trenches, conforming to IS-8329/2000 with cement mortar lining with and including rubber gasket jointing conforming to IS-15382/tyton joint complete with all fittings e.g Tee, Bends etc all as specified and directed.
80
-
-
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m depth for laying of pipe / foundation etc or for shaft well cess pits manholes pier holes etc and not exceeding 1.5 m in depth and n.exc 10 sq m on plan and getting out in soft/loose soil complete all as specified & directed.
10
-
-
Returning filling in, including spreading leveling watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified & directed
7.5
-
-
Removing excavated materials (soil) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified & directed
1
-
-
M&L for boring the holes under roads pavements, hardstanding by treanch less techonology, using ultrasound technique and necessary machine including CI Pipe of 100 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.
1
-
-
M&L for cutting of roads for laying of pipe under roads, pavements, hardstanding by excavation and making good after laying and testing complete all as specified and directed.
2
-
-
S&F in repair sluice valve class PN-1.6 heavy duty flanged ends drilled ISI marked confirming to IS: 14846 suitable for 150 mm bore pipe, wheel operated (Handle) with high tensile stainless steel spindle, including nuts, bolts and jointing with jointing materials etc. complete including taking out old existing unservicable sluice valve including making arrangement for safe working all as specified and directed. Make: BIR, KIRLOSKAR, Kartar
2
-
-
S&F in repair sluice valve class PN-1.6 heavy duty flanged ends drilled ISI marked confirming to IS: 14846 suitable for 100 mm bore pipe, wheel operated (Handle) with high tensile stainless steel spindle, including nuts, bolts and jointing with jointing materials etc. complete including taking out old existing unservicable sluice valve including making arrangement for safe working all as specified and directed. Make: BIR, KIRLOSKAR, Kartar
2
-
-
Supply & Replacement suction sweeper head 24 / 36 " long including pump after dismantling the unserviceable one.
2
-
-
S&F foot valve of size 100 mm bore complete all as specified & directed
2
-
-
S&F foot valve of size 80 mmbore complete all as specified & directed
2
-
-
S& F Chlorine test kit of standard size for to check daily Chlorine as directed
2
-
-
Supply only O-Tolodine regent solution in 500 ml bottle as per Sample approved complete all as specified and directed.
2
-
-
Taking down the chlorine plant of make as per existing plant from chlorine cylinder, opening it to detecting fault and repiar / replacement of unserviceable parts, overhauling and refixing the same after completion of job including testing complete all as specified and as directed.
Note :- Repair/Replacement of unserviceable parts will be measured and paid under relevent items
2
-
-
S&F in repair of following parts of Chlorine Plant complete all as specified and as directed.
-
-
-
(a) Vaccum regulator and measuring glass with 'O' ring set.
2
-
-
(b) Inlet valve
2
-
-
(c) 'O' ring set for measuring glass
2
-
-
(d) Clamping ring
2
-
-
(e) Valve body
2
-
-
(f) Wate pressure gauge round type 75mm dia. Suitable for 6 to 10 kg/cm2 pressure
2
-
-
(g) Valve cap
2
-
-
(h) Ball guide
2
-
-
(j) Spring support
2
-
-
(k) Filter
2
-
-
(l) Presssure spring
2
-
-
(m) Valve seat
2
-
-
(n) Set screw
2
-
-
(o) Adjust screw upto 200 gms /hr glass
2
-
-
(p) Diaphragm disc
2
-
-
(q) Ring diaphragm
2
-
-
(r) Main chlorinator diaphragm
2
-
-
(s) Yoke clamp assembly for chloronome plant
2
-
-
(t) Main diaphram with plate assembly
2
-
-
Taking down the ejector assembly of chlorine plant, opening it to detecting fault and repiar / replacement of unserviceable parts, overhauling and refixing the same after completion of job including testing all as specified and as directed. Note :- Repair/Replacement of unserviceable parts will be measured and paid under relevent items.
2
-
-
S&F in repair of following parts of ejector assembly of Chlorine Plant complete all as specified and as directed.
-
-
-
(a) Ejector nozzle pressure feed
2
-
-
(b) Ejector diaphragm assembly
2
-
-
(c) Ejector spring assembly
2
-
-
(d) Ejector diaphram nut
2
-
-
S&F in repair of nylon braided PVC pipe 25mm bore heavy duty complete all as specified and as directed.
40
-
-
S&F in repair of teflon pipe 6mm internal dia. and 10mm outer dia complete all as specified and as directed.
40
-
-
Supplying, installing, commissioning & testing of cast iron body butterfly valves of size 200 mm capacity 10 Bar and PN.1.0 rating and per BIS 13095:1991 with fresh rubber gaskets , bolts and nuts Butterfly vlaves all as specified and directed.
4
-
-
Supplying, installing, commissioning & testing of cast iron body butterfly valves of size 100 mm capacity 10 Bar and PN 1.0 rating and per BIS 13095:1991 with fresh rubber gaskets, bolts and nuts Butterfly vlaves all as specified and directed.
2
-
-
Supply and Fixing of suction strainer for 25HP pump set of size 200mm all as specified and directed.
2
-
-
S&F in replacement chlorinator plant complete all as specified and directed
1
-
-
Supply and fixing in replacement of PVC suction currugated hose pipe with flanged ends of green colour of bearing capacity 2500 Pa, temperature range 0deg-100deg and velocity 30-40 m/s of foloowing size all as specified and directed by Engr-in-Charge.
-
-
-
(a) 25 mm bore
50
-
-
(b) 50 mm bore
50
-
-
(b) 80 mm bore
50
-
-
Supply and fixing all in one solar LED street light IP66 with high efficiency mono crystaline solar panel PV module not less than 12V, 20W lithium ferro phosphate battery with in-built BMS technology, capacity 12.8V, 10.5 Ah high efficiency LED 100LM/W, MPPT solar charge controller and aluminium extruded body & is specially programmed to automatically control the dimming and brightness of light, which increase the backup time and minimum 10 Hrs backup.
2
-
-
Supply and fixing of display board of outer size 4.1X1.0 mtr made out of stainless steel of thickness 2 mm at square pipe 8X8 cm with back support of 40X5 mm stainless steel plate fitted at 3 fet interval of board backside including writing name of installation and unit as directed with reflecting tape of any colour as directed alongwith legs of size 8X8 cm square pipe upto the height of 14 feet from ground with foundation with stand 26 km/hr air velocity alongwith 02 nos of spot light at suitable place as directed with point wiring as directed.
2
-
-
Supply and fixing aesthetically designed decorative banner arm single, enhancing the appearance of the pole including pole of size 50 mm dia of 03 mtr hight fitted in PCC (1:2:4) including foundation and coping of size 1' X 1' X 3' and banner of desired material including supportive rod on upper and bottom side of banner and fixed with clamp on arm and with writing description all as specified and directed by Engr-in-Charge.
2
-
-
Dismantling and Taking Out old U/S LT Busbar chamber and Supply, installation, Commissioning and testing LT Busbar chamber,size of 600x600x400 mm for 3 phase, 6 wire, 415 Volts ,AC , 50 Hz supply, Outdoor cubical type, dust and vermin proof, pedestal mounting type suitable for Outdoor applications having suitable shape/ size canopy on top, made out of 3.15 mm thick MS sheet with using 25mm x 25mm x 5mm angle iron frame and supports, duly finished with powder coated using two coats of synthetic enamel paint of approved colour over a coat of red oxide primer all over steel surfaces complete with separate compartment of suitable shape and size with shutter and locking arrangement and including PCC work for fixing panel legs and bus bar of Copper conductor suitable shape and size , 6 No of 200 amps rating including taking out end connectinons of the existing cables and fixing the cable with the panel using new lugs and glands of suitable size.
1
-
-
S&F in repair Off load change over switch 200 Amp, 4 pole, 415 Volt, etc complete all as specified and directed
1
-
-
Comprehensiv maintenance of Vehicle Repair / maint of vehicles- Tata 207, Tata Xenon, once in a month by cleaning the vehicle from outside with the help of soap / shampoo / car washing detergent completely by removing dust and dirt from under side of the vehicle, checking of lubricants oil, water, brake oil and other acessories fluid and top up it if required. Cleaning the vehicle from inside with the help of suction pump removing dirt and dust from complete unit, cleaning of dash board with the help of suitable mild cleaning agent of car. Cleaning of radiator of vehicle, checking its efficiency and proper functionng, checking of brake of the vehicle and do minor repair if required. Do suitable oiling and greasing. Checking allingnment of the wheels functioning of wiper, indicators, back and front light, suspension system, leaf spring, music system, and all electrical work like wiring and testing of all lights and bulbs, repair of puncture of tube inner if any complete all as specified and directed
30
-
-
All as per item No 169 here in before but for Eicher 10.70/10.75 complete all as specified and as directed
24
-
-
All as per item No 169 here in before but for Hindustan Car Ambassador complete all as specified and as directed
6
-
-
Repair / maint of vehicles- Motor cycle / Royal Enfield, once in a month by cleaning the vehicle from outside with the help of soap / shampoo / washing detergent completely by removing dust and dirt from under side of the vehicle, checking of lubricants oil, brake oil and other acessories fluid and top up it if required. checking of brake of the vehicle and do minor repair if required. Do suitable oiling and greasing. Checking of brakes, clutch and accelerator, Chain & socket, indicators, back and front light, suspension system and testing of all lights and bulbs, repair of puncture if any complete all as specified and directed
18
-
-
All as per item No 172 here in before but for Motor Cycle Hero
12
-
-
[A] Tata 207 DI/Tata Xenon
Servicing and Repair/Maintenance of Vehicles- Tata 207,Tata Xenon comprising checking and repair/ replacement of unserviceable spares of engine, self starter, gear box FIP (Fuel Injector Pump), shaft,shocker and suspension system, braking system inlcuding brake shoe, Radiator cleaning, replacement of all type of filters and greasing of all wheels, Wheel alignment and wheel balancing by computerized Machine including tyre rotation etc of Vehicles including dismantling / Replacing of defective parts with new parts at workshop complete all as specified and directed by Engr in charge Note :-(i). Spare parts shall be measured and paid separatly under relevant items here in after as "SUPPLY ONLY" but fixing of the same deemed to be included in unit rate. (ii). Other minor consumable items like nut bolts washer, cotton waste etc are deemed to be included in the quoted rate Supply only following items :-
10
-
-
Air filter Oil filter and Fuel filter each set of three Make - Micro ,bosh
4
-
-
Supply only Clutch and pressure plate set including clutch bearing and clutch cylinder,Cluthch Paddle complete Make -C K or eqlt
4
-
-
Supply only Head light assembly complete with Bulb and connection complete . Make - Autopal, Helonix,Lumax
4
-
-
Supply only Head light bulb Helogen 12 volt 60 watt Make - Autopal,Helonix
2
-
-
Supply only Fog lamp
4
-
-
Supply only Brake/ Back light Assy Make - Autopal, K K
8
-
-
Supply only Indicator Assy Make - Autopal, K K
16
-
-
Supply only Wipper Assy with blade complete make -Syndicate,Champion etc
4
-
-
Supply only Water pump assembly
4
-
-
Supply only odometer
4
-
-
Supply only Door Lock assembly Make -Syndicate,ATS
12
-
-
Supply only Coolant bottle with pipe
2
-
-
Supply only Mud pad of best quality
8
-
-
Supply only Side looking mirror of side doors of best quality
4
-
-
Supply only Fan v belt Make -Fenner
4
-
-
M & L for rewinding of self starter of Vehicles with super enamelled insulating copper wire of existing gauge , insulating materials including assembling and testing complete all as specified and directed by Opening and dismantling of self starter, and replacing with following items.
(a) Carbon brushes -01 Set (b) Solenoid Switch -01 No (c) bendix -01 No (d) Fly wheel -01 No (as per sample).
2
-
-
Dismantling and Taking out old U/S self starter and supply & Fixing New Self Starter TATA-207
2
-
-
M & L for repair of alternator including repair/replace of rectifier assembly and repair/replace of rotor assembly complete all as specified and as directed
4
-
-
M & L for repair of suspension system by Dismantling front wheel and wheel joint upper and Lower of suspension system,leaf springs, reassembling and testing after repair including replacement of following items:- (a) Suspension Kit -01 Kit, (b) Lower arm bush -08 Nos. (c) Upper arm bush -04 Nos. (d) Wheel joint upper -02 Nos. (e) Wheel joint lower -02 Nos. (f) Coil spring pad -02 Nos. (g) Tie rod end -04 Nos. (h) Upper arm bolt -02 Nos. (j) Kamani bush front -01 No. (k) Penion bearing -02 Nos. (l) Penion -01 No. (m) UJ Cross -01 No. testing complete all as specified and directed
4
-
-
Repair of Wheels and braking system including servicing and testing of master and slave cylinder by Dismantling front and rear wheels, greasing, brake work including replacing the following items:-
(a) Brake pad front wheel -04 Nos. (b) Rear wheel brake shoes -08 Nos. (c) Wheel bearing inner -02 Nos. (d) Wheel bearing outer -02 Nos. (e) Wheel cylinder kit -01 No. (f) Brake plate assly -01 No. (g) Brake pad assembly -04 Nos.(h) Brake lining-01 No
4
-
-
M & L for repair of Master cylinder complete all as directed.
3
-
-
Repair of fuel pump and testing on testing bench reassembling after repair and replacing with following items:-
(a) Valve lifter -01 No (b) Spring -01 No and other items as required
3
-
-
Opening steering assembly, removing stearing rack, lathe work, facing, ramming including replacing the following items:-
(a) Centre pin bush -02 Nos. (b) Centre bearing assly -01 No. (c) Link rod repair kit, (d) Check nut -02 No. (e) Lower stearing oil -01 Ltr.
4
-
-
Denting and Painting of Vehicle part or full body in work shop including replacement of rusted M S sheet by using gas welding,applying two coat of synthetic enamelled paint over one coat of base primer and matching with existing surface complete all as specified and directed
Only painting including painting of all army sign and marking and vehicle BA No. on Number plate.
4
-
-
Denting and welding of broken parts complete all as directed by the Engr-in-Charge
4
-
-
Replacement of rusted/ damaged seat cover complete set including repair of Damaged seats and stitching work complete all as specified and directed
5
-
-
Supply and fixing of foot mat for Vehicle-Tata 207 complete all as specified and directed
8
-
-
Supply only Floor matting best quality for TATA 207 DI/TATA XENON
2
-
-
Replace of Front glass/roof top rubber beading complete Make -Syndicate,ATS,TATA
4
-
-
Repair to Door /Window glass with rubber beading complete Make -Syndicate,ATS,TATA
4
-
-
Supply and fixing in repair of Horn assembly complete including wiring connection and fixing
4
-
-
Repair to gear box including bush repair/repalce and greasing etc. Complete.
3
-
-
Repair to tank leakage if any for the fuel tank including cleaning of tank and replacement of u/S float valve assembly and fuel tank lock and key.
2
-
-
Supply and fixing in repair of brass battery terminal complete
4
-
-
Dismantlingand Taking out old UN alternator and S&F alternator complete all as specified and as directed
2
-
-
Dismantlin and Taking out of Das board complete and replacement unservisable mounting, wiring etc. in a systematic way complete all as directed.
3
-
-
S&F in replacement of thermostate valve complete all as directed.
3
-
-
(C) Eicher 10.70/10.75 Servicing and Repair / Maintenance of Vehicles- Eicher 10.70/ 10.75 each comprising checking and repair/replacement of unserviceable spares of engine, self starter , gear box FIP (Fuel Injector Pump), shaft, shocker and suspension system , braking system inlcuding brake shoe , Radiator cleaning, replacement of all type of filters and greasing of all wheels, Wheel alignment and wheel balancing by computerized Machine including tyre rotation etc of Vehicles including dismantling / Replacing of defective parts with new parts at workshop complete all as specified and directed by Engr in charge Note :-(i). Spare parts shall be measured and paid separatly under relevant items here in after as "SUPPLY ONLY" but fixing of the same deemed to be included in unit rate.
(ii) Engin oil,Brake oil, gear oil and coolant shall be measured and paid separatley . (iii) Servicing of vehicle shall be carried out at authorised workshop only.
(iv).Other minor consumable items like nut bolts washer, cotton waste etc are deemed to be included in the quoted rate
8
-
-
Supply only Air filter , Oil filter and Fuel filter each set of three Make - Micro , bosh
4
-
-
Supply only Clutch and pressure plate set , including clutch cylinder , Clutch bearing complete Make -C K or eqlt
4
-
-
Supply only Head light assembly complete with Bulb and connection complete . Make - Autopal, Helonix,Lumax
4
-
-
Supply only Head light bulb Helogen 12 volt 60 watt Make - Autopal,Helonix
8
-
-
Supply only Break/ Back light Assy Make - Autopal, K K
8
-
-
Supply only Indicator Assy Make - Autopal, K K
8
-
-
Supply only Fog lamp
8
-
-
Supply only Wipper Assy with blade complete make -Syndicate,Champion etc
4
-
-
Supply only odometer
4
-
-
Replace of Front glass/roof top rubber beading as per existing complete
4
-
-
Repair to Door /Window glass with replacement of rubber beading as per existing complete
4
-
-
Supply only Door Lock assembly Make -Syndicate,ATS
8
-
-
Supply only Water pump assembly
3
-
-
Supply only Side looking mirror of side doors of best quality
8
-
-
Supply only Mud pad of best quality
16
-
-
Supply only Coolant bottle with pipe
4
-
-
Supply only Fan v belt Make -Fenner
4
-
-
Denting and Painting of Vehicle part or full body in work shop including replacement of rusted M S sheet by using gas welding,applying two coat of synthetic enamelled paint over one coat of base primer and matching with existing surface complete all as specified and directed
Only painting including painting of all army sign and marking and vehicle BA No. on Number plate.
2
-
-
Denting and welding of broken parts complete all as directed by the Engr-in-Charge
2
-
-
Replacement of rusted/ damaged cloth seat/seat cover including stitching complete all as specified and directed
2
-
-
Supply only Floor matting best quality for Eicher 10.70/10.75
4
-
-
Supply and fixing of foot mat of size 600x300 mm
4
-
-
M & L for rewinding of self starter of Vehicles with super enamelled insulating copper wire of existing gauge, insulating materials including assembling and testing complete all as specified and directed by Opening and dismantling of self starter, and replacing with following items.
(a) Carbon brushes -01 Set (b) Solenoid Switch -01 No (c) bendix -01 No (d) Fly wheel -01 No (as per sample).
3
-
-
M & L for repair of alternator including repair/replace of rectifier assembly and repair/replace of rotor assembly complete all as specified and as directed
3
-
-
M & L for repair of suspension system by Dismantling front wheel and wheel joint upper and Lower of suspension system,leaf springs, reassembling and testing after repair including replacement of following items:- (a) Suspension Kit -01 Kit, (b) Lower arm bush -08 Nos. (c) Upper arm bush -04 Nos. (d) Wheel joint upper -02 Nos. (e) Wheel joint lower -02 Nos. (f) Coil spring pad -02 Nos. (g) Tie rod end -04 Nos. (h) Upper arm bolt -02 Nos. (j) Kamani bush front -01 No. (k) Penion bearing -02 Nos. (l) Penion -01 No. (m) UJ Cross -01 No. testing complete all as specified and directed.
3
-
-
Repair of Wheels and braking system including servicing and testing of master and slave cylinder by Dismantling front and rear wheels, Hub greasing, brake work including replacing the following items:-
(a) Brake pad front wheel -04 Nos. (b) Rear wheel brake shoes -08 Nos. (c) Wheel bearing inner -02 Nos. (d) Wheel bearing outer -02 Nos. (e) Wheel cylinder kit -01 No. (f) Brake plate assly -01 No. (g) Brake pad assembly -04 Nos.(h) Brake lining-01 No
3
-
-
M & L for repair of Master cylinder complete
3
-
-
Repair of fuel pump and testing on testing bench reassembling after repair and replacing with following items:-
(a) Valve lifter -01 No (b) Spring -01 No and other items as required
3
-
-
Opening steering assembly, removing stearing rack, lathe work, facing, ramming including replacing the following items:-
(a) Centre pin bush -02 Nos. (b) Centre bearing assly -01 No. (c) Link rod repair kit, (d) Check nut -02 No. (e) Lower stearing oil -01 Ltr.
3
-
-
Supply and fixing of PVC multistranded copper single core cable 25 sqmm required for Battery for Vech
6
-
-
Repair of puncture of tube inner complete all as specified and directed
6
-
-
Repair to gear box including bush repair/repalce and greesing etc. Complete.
4
-
-
Repair to tank leakage if any for the fuel tank including cleaning of tank and replacement of u/S float valve assembly and fuel tank lock and key.
2
-
-
Reconditioning and replacement of battery of unserviceable battery 12 volts 80AH
4
-
-
Reconditioning and replacement of battery of unserviceable battery 12 volts 150AH
2
-
-
Supply and fixing in repair of brass battery terminal complete
4
-
-
Dismantlin and taking out of Das board complete and replacement unservisable mounting, wiring etc. in a systematic way complete
2
-
-
S&F in replacement of thermostate and thermostate valve complete all as specified and directed
3
-
-
Supply and fixing in replacement of won out tarpoline and nilon rope and proper steel flate and angle including welding work if required complete all as specified and directed.
3
-
-
[D] Staff Car Ambassdor
Servicing and Repair / Maintenance of Vehicles- Ambassdor car Make- Hindustan each comprising checking and repair/replacement of unserviceable spares of engine, self starter, gear box FIP (Fuel Injector Pump), shaft, shocker and suspension system, braking system inlcuding brake shoe, Radiator cleaning, replacement of all type of filters and greasing of all wheels, Wheel alignment and wheel balancing by computerized Machine including tyre rotation etc of Vehicles including dismantling / Replacing of defective parts with new parts at workshop complete all as directed Note :-(i) Spare parts shall be measured and paid separatly under relevant items here in after as "SUPPLY ONLY" but fixing of the same deemed to be included in unit rate.
(ii) Engin oil,brake oil, gear oil and coolant shall be measured and paid separatley . (iii) Servicing of vehicle shall be carried out at authorised workshop only.
(iv) Other minor consumable items like nut bolts washer , cotton waste etc are deemed to be included in the quoted rate
2
-
-
Supply only Air filter , Oil filter and Fuel filter each set of three Make - Micro , bosh
1
-
-
Supply only Car polish 200gm
2
-
-
Supply only Glow Plug
1
-
-
Supply only Engine main seal rear
1
-
-
Supply only Gear box seal front
1
-
-
Supply only Gear sim
1
-
-
Supply only Gear box packing kit
1
-
-
Supply only Tapped cover gas kit
1
-
-
Supply only Fan belt (Fenner)
1
-
-
Supply only Fuel pipe set
1
-
-
Supply only Fuel pipe clip
2
-
-
Labour charge for dismantling engine complete chassis and replacement of main seal and dismantling gear box and replacement of gear box seal and other u/s part . (NOTE :- Parts will be measured and paid as SUPPLY ONLY")
1
-
-
Supply only Radiator cleaning fluid bottle
2
-
-
Supply only Coolant bottle with pipe
1
-
-
Supply only Silencer packing
1
-
-
Supply only Silencer belt (TVS)
1
-
-
Supply only Distributor paint & condenser kit (Lucus)
2
-
-
Supply only Float pin
2
-
-
Supply only Dyframe spring (carburetor)
2
-
-
Supply only Carburetor packing kit
2
-
-
Supply only Rocker
2
-
-
Supply only Rocker bolt
4
-
-
Supply only Quarter glass lock wet
2
-
-
Supply only Steering cover
2
-
-
Supply and fixing spark plug
4
-
-
Dismantling and Taking out and rimoving old damage Radiator and Supply & Fixinf Radiator to TATA -207
1
-
-
Dismantling and Taking out and removing old damage Radiator and Supply & Fixinf Radiator to Eicher
1
-
-
Reconditioning and replacement of battery 12V,90 AH complete all as specified and directed.
2
-
-
M & L for rewinding of self starter of Vehicles with super enamelled insulating copper wire of existing gauge , insulating materials including assembling and testing complete all as specified and directed by Opening and dismantling of self starter, and replacing with following items.
(a) Carbon brushes -01 Set (b) Solenoid Switch -01 No (c) bendix -01 No (d) Fly wheel -01 No (as per sample).
1
-
-
M & L for repair of suspension system by Dismantling front wheel and wheel joint upper and Lower of suspension system,leaf springs, reassembling and testing after repair including replacement of following items:- (a) Suspension Kit -01 Kit, (b) Lower arm bush -08 Nos. (c) Upper arm bush -04 Nos. (d) Wheel joint upper -02 Nos. (e) Wheel joint lower -02 Nos. (f) Coil spring pad -02 Nos. (g) Tie rod end -04 Nos. (h) Upper arm bolt -02 Nos. (j) Kamani bush front -01 No. (k) Penion bearing -02 Nos. (l) Penion -01 No. (m) UJ Cross -01 No. testing complete all as specified and directed.
1
-
-
Repair of Wheels and braking system including servicing and testing of master and slave cylinder by Dismantling front and rear wheels, greasing, brake work including replacing the following items:-
(a) Brake pad front wheel -04 Nos. (b) Rear wheel brake shoes -08 Nos. (c) Wheel bearing inner -02 Nos. (d) Wheel bearing outer -02 Nos. (e) Wheel cylinder kit -01 No. (f) Brake plate assly -01 No. (g) Brake pad assembly -04 Nos.(h) Brake lining-01 No
1
-
-
M & L for repair of Master cylinder complete
1
-
-
Repair of fuel pump and testing on testing bench reassembling after repair and replacing with following items:-
(a) Valve lifter -01 No (b) Spring -01 No and other items as required
1
-
-
Opening steering assembly, removing stearing rack, lathe work, facing, ramming including replacing the following items:-
(a) Centre pin bush -02 Nos. (b) Centre bearing assly -01 No. (c) Link rod repair kit, (d) Check nut -02 No. (e) Lower stearing oil -01 Ltr.
1
-
-
Supply only Velvet best quality
14
-
-
Supply only Markeen cloth
60
-
-
Supply only Banyan Foam
10
-
-
Supply only Foam sheet ½ 32 density size 3x6
6
-
-
Supply only Foam sheet 2” 32 density size 3x6
2
-
-
Supply only Floor matting best quality
3
-
-
Supply and fixing of foot mat of size 600x300 mm
4
-
-
[E] Motor Cycle Royal Enfield 350 CC Servicing and Repair/Maintenance of Vehicles- Motor cycle Royal Enfield 350 CC comprising checking and repair/replacement of unserviceable spares of engine, gear box, FIP(Fuel Injector Pump), suspension system ,braking system , Chain and chain cover, Kick Assembly, replacement of filters and greasing of all wheels, of Vehicles including dismantling / Replacing of defective parts with new parts at work shop complete all as specified and directed by Engr in charge Note :-(i). Spare parts shall be measured and paid separatly under relevant items here in after as "SUPPLY ONLY" but fixing of the same deemed to be included in unit rate.
(ii).Engine Oil,brake oil, gear oil shall be measured and paid separatley . (iii). Servicing of vehicle shall be carried out at authorised workshop only.
(iv).Other minor consumable items like nut bolts washer , cotton waste etc are deemed to be included in the quoted rate
6
-
-
All per item no 285 above but for Motor cycle -Hero
4
-
-
Supply only Brake shoe
3
-
-
Supply only Clutch plate
3
-
-
Supply only Brake cable
3
-
-
Supply only Speedometer assembly
3
-
-
Supply only Horn assembly
3
-
-
Supply only Speedometer Cable
3
-
-
Supply only Back light assembly
3
-
-
lock and key of fuel tank
2
-
-
Supply only Brake oil
10
-
-
Supply only Steering/gear oil
10
-
-
Supply only Coolant
60
-
-
Engine Oil
60
-
-
M&L for repair Air Compreor 500 LBS & Single cylinder with rewanding moter 2 HP, replacement of parts-Piston-ring set, boring of block, oil seal, fan belt, air pipe -20RM with Nozel
1
-
-
M&L for repair Car wasing single cylindor with 2 HP moter winding, replacement of items fan belt, inlet pipe and outlet pipe with nozel and pully wheel alliment, Nut-bolt, piste ring, pisten seal, and overling compete all as specified and directed.
1
-
-
Denting and Painting of Moter cycle part or full body in work shop including replacement of rusted M S sheet by using gas welding, applying two coat of synthetic enamelled paint over one coat of base primer and matching with existing surface complete all as specified and directed
Only painting including painting of all army sign and marking and vehicle BA No. on Number plate.
Notes:-
(a). All above vehicle shall be tested by the contractor Rep and their functionality shall be ensured on daily basis before going on duty at 8:30 AM on each working day at MT yard in presence of MES Rep/Engineer-in-charge and by the contractor rep. In case of failure on the part of the contractor to do so Penal recovery of Rs 500/- per day per vehicle shall be made from the contractors dues.
(b) All defective parts shall be replaced by contractor within 48 hrs in above listed vehicle if any breakdown/offroad condition of vehicle. In case of failure on the part of contractor to do so a panel recovery of Rs. 1000/- per day per vehicle shall be made from the contractor dues.
(c) The contractor must submit the purchase voucher of the spares parts and test and repair report from the authorised service station/ authorised workshop after repair of vehicle.
4
-
-
Supply only innertube for TATA 207 or TATA Xenon all as specified and directed by Engr-in-Charge.
10
-
-
Supply only innertube for Eicher all as specified and directed by Engr-in-Charge.
8
-
-
Supply only innertube for motorcycle Royel enfield all as specified and directed by Engr-in-Charge.
3
-
-
Supply only innertube for motorcycle Hero all as specified and directed by Engr-in-Charge.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements