Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Civil And Construction
Civil Works Others
Building Construction
Eprocure
Opening Date31 May 2023
Closing Date28 Jun 2023
Tender Amount₹ 36,00,000
Costs
EMD
₹ 72,000Document Cost
₹ 500Tender Fee
Refer Documents
Summary
8284 Repair To Certain Tiling Of Wall / Flooring, Pcc Etc., Internal Electrification Of Otm / Md Accn Of 23 / 39 (i) R And O Flt, Mes Colony And Ge (p) Bareilly Complex Under Ge (east) Bareilly.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_MES_599883_1Bid Award Id
ViewTender No
8284/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Demolition cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)complete all as specified and directed.
12
-
-
... More
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.
15
-
-
... More
Demolition concrete of any description and in any position not otherwise specifically provided cement concrete complete all as specified and directed.
9
-
-
... More
Dismantling structural steel work including doors , gates but excluding framed truss etc. complete all as specified and directed.
7.9
-
-
... More
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.
60
-
-
... More
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n. exc 4 sqm each complete all as specified and directed.
20
-
-
... More
Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each complete all as specified and directed.
28
-
-
... More
M&L 25 mm thick PCC 1:2:4, type B-0 (using 12.5mm graded stone aggregate) as in floors, surfaces finished fair and even complete all as specified and directed.
90
-
-
... More
M & L 40 mm thick PCC 1:2:4, type B-1 using 20 mm graded stone aggregate as in floors, surfaces finished fair and even complete all as specified and directed.
120
-
-
... More
M&L 100 mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base floor / pavings complete all as specified and directed
280
-
-
... More
M&L providing non- skid glazed ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n xc 0.11 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge.
30
-
-
... More
M&L providing non- skid glazed ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n xc 0.18 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge.
60
-
-
... More
M & L Glazed ceramic coloured tiles in vertical surface 300 mm x 200 mm x 7 mm thick set and jointed in neat cement slurry and pointed in white cement or coloured cement to match the surface incl 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. Note : Engr-in-Charge will select sample from latest catalouge.
45
-
-
... More
M & L Glazed ceramic coloured tiles (square/ rectangular) with border in vertical surface 300 mm x 450 mm / 300x600 x 7mm thick set and jointed in neat cement slurry and pointed in white cement or coloured cement to match the surface incl 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. Note : Engr-in-Charge will select sample from latest catalouge.
120
-
-
... More
M&L providing non- skid glazed ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but n exc 0.36 sqm, in floor etc including 15 mm thick screed bed in cement mortar 1:6 set and joited with neat cement slurry and pointed in coloured cement including to match coloured tiles complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge.
60
-
-
... More
M&L providing non- skid glazed joint free ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but n exc 0.36 sqm, in dado/skirting etc including 10 mm thick rendering in CM mortar 1:4 set and joited with neat cement slurry and pointed in coloured cement including to match coloured tiles complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge.
6
-
-
... More
M&L for Vitrified light shade coloured ceramic tiles 10 mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl 15mm thick screed bed in CM 1:6 complete complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge.
90
-
-
... More
M&L for Vitrified light shade colored ceramic tiles 10 mm thick (square / rectangular) polished area of each tile not exceeding 0.36 sqm in skirting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl 10mm thick rendering in CM 1:4 complete complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge.
9
-
-
... More
M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to get mirror finish complete all as specified and as directed.
90
-
-
... More
M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to get mirror polish complete including rendering, 10mm thick CM 1:4 on vertical surface complete all as specified as directed.
12
-
-
... More
M&L 18 mm thick granite of black colour (tablee rubbed and polished) as in windows cill, in steps, jambs, pillars, cooking platforms and like in cement mortar (1:4) including form work, pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as specified as directed.
30
-
-
... More
M & L for 75mm thick PCC 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed.
50
-
-
... More
M&L in repairs for machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed.
160
-
-
... More
M&L in repairs for machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed.
120
-
-
... More
M&L in repairs for machine pressesd pre-cast cement concrete 1:2:4, type B1 (using 20mm graded crushed stone aggregate) kerb stone including weathering, slightly rounded or chemferred angles and throating complete all as specified.
3
-
-
... More
M&L in repairs for machine pressesd coloured glazed chequered cement concrete 20cm x 20cm x 25cm thick Glossy finish with mixture of grey and white cement in equal proportions and no pigment set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including screed bed or bedding layer of mortar 20 mm thick, in cement mortar 1:6, complete all as specified and directed.
80
-
-
... More
M&L for brick work with fly ash bricks old size bricks in cement mortar, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified as directed
15
-
-
... More
M&L rendering 15 mm thick in CM 1:6 on brick masonary or concrete surfaces of wall surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed.
280
-
-
... More
M& L for rendering 15mm thick in cement mortar (1:4),finished even and smooth using extra cement to on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and smooth without using extra cement complete all as specified and directed.
190
-
-
... More
M&L rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed.
80
-
-
... More
M & L for applying cement slurry over existing roof surface @ 3 Kg/Sqm incl mix with water proofing liquid @ 0.15 ltr per 50 kg cement bags as per manufactures instructions complete all as specified and directed.
145
-
-
... More
M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with and including using water proofing liquid @ 150 ml per bag of cement complete all as specified and directed.
(Note : Cost of Water proofing liquid deemed to including in qouted rates of itme
145
-
-
... More
Supply and fix APP polymeric water proofing membrane, minimum 3 mm thick and weight 4 kg per Sqm with mineral, minimum 3.5 kg per Sqm without mineral weight make Dr fixit tochshield membrane / equivalent with rich bitumen and select polymers blended together to obtain excellent heat resistance & cold resistant by Dr fixit / equivalent or M/S IWL Ltd manufactured by Hyperplas Pvt Ltd as approved by GE, black finish reinforced with non-woven polyester matt, with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or ‘EMW FLATE’ of M/S Texas India Ltd} at the rate of 0.50 Kg/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 100 mm and sealing including apply a coat of cold emulsion bituminous primer all as per manufacturer’s instructions complete including removal of existing treatment all as specified and as directed.
Note: (i) Coved fillets in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate with using Dr fixit pidilite LW(+) , of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces and thereafter surface painted with hot paving bitumen of Grade 85/25 confirming to IS-73, applied@1.20 Kg/Sqm over a coat of bituminous primer confirming to IS-3384 applied @ 0.30 Kg/Sqm (ii) Polymeric membrane shall be taken to a height of 45cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. (iii) The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iv) In case of stone masonry parapet wall etc a groove of size 25mmx25mm(minimuim) shall be made in coved fillet at the junction of roof and parapet wall/mumty Chimny/other vertical surfaces and polimeric membrane insterted in groove and sealed with paving bitumen (v) Exposed surfaces of APP membrane shall be applied with two coat of bituminous aluminium paint @ 150 ml/Sqm. (vi) Above aspects are deemed to be included in quoted rate.
145
-
-
... More
M&L PCC 1:5:10, type E-2 (using broken brick aggregate) as sunken sub base of floor fillings complete all as specified and directed.
2
-
-
... More
S&F 32mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed.
3
-
-
... More
M & L for WPT in sunken floors as described here under:- (i) Sunken floor and sides up to finished floor level shall be plastered with 15 mm thick cement plaster in CM 1:4 mixed with water proofing liquid @ 150 ml per bag of cement . (ii) Preparing plastered surfaces and providing APP polymeric water proofing membrane, minimum 4mm thick and weighing above 4.0 Kg/Sqm of make Dr fixit tochshield membrane with rich bitumen and select polymers blended together to obtain excellent heat resistance & cold resistant by Dr fixit or M/S IWL Ltd manufactured by Hyperplas Pvt Ltd as approved by GE, black finish reinforced with non-woven polyester matt, with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or ‘EMW FLATE’ of M/S Texas India Ltd} at the rate of 0.40 Kg/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instructions including preparation of surface by removing the existing treatment, complete all as specified an as directed Note :- (i) Polymeric membrane shall be laid in sunken floor and on sides up to finished floor level. (ii) The waterproofing treatment shall be got carried out by the manufacturer or their authorised applicators. (iii) Above aspects are deemed to be included in quoted rate. (iv) Supply only water proofing liquid shall be measured and paid seperately
12
-
-
... More
S & F in repair 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as spd as directed
0.35
-
-
... More
S&F for 40 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .
45
-
-
... More
S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, mitred and rebated sash bars, any numbers The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.
(Note :-Wire mess shall be measured and paid for separately)
45
-
-
... More
S&F in repairs 150 mm long floor door stopper of brass body and tongue with hard drawn steel spring complete all as specified and directed.
22
-
-
... More
S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing.
140
-
-
... More
S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisiting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing.
42
-
-
... More
S&F mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete FE-290 grade E-165 all as specified and directed.
210
-
-
... More
S&F of Steel windows with pressed steel frame ( size 95x 45x 1.25mm) side hung shutter including box type hinges with steel handle, and steel peg steel complete with glazed openable shutter with glazing bar (open out side) and wire gauged openable shutter without glazing bar (open in side) dovetailed or welded complete all as specified and directed and all as per Drg No TD/088 dt 07 jan 2002 Note:- (i) Two shutter ie wire gauged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit. (ii) Rate for filling of PCC in frame deemed to be included in quoted rate. (ii) MS grill shall be measured and paid seperatly under relevant item of schedule
20
-
-
... More
S&F for steel ventilators fixed type, with glazing bars complete welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed.
(Note :- Glass shall be measured and paid for separately).
3
-
-
... More
M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.
16
-
-
... More
M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane (upto 3 story building (MAP area) including Hacking out old, broken glass (any thickness,) size quality or description) from metal frames including punching or drilling out old glazing pins/spring clips complete all specified and as directed.
100
-
-
... More
S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed.
47.5
-
-
... More
S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing or composite panel LDPE core PET coating (both side decorative type) fixed with and including 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 63x38x1.48mm thick with rawl plug
(b) Middle and lock rail : 85x44x1.48mm thick
(c) Bottom rail : 114x44x1.48mm thick
(d) Top rail/style : 114x44x1.48mm thick
(e) Aluminium beading : 0.7mm thick
(f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty (Make Sandhu ISI marked or its equivalent approved make)
(g) Making good of wall surface to match with existing surface complete.
48
-
-
... More
S&F in repair stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples in m s window / wooden shutter complete all as specified and directed.
15
-
-
... More
S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5 mm thick aluminium composite panel LDPE core PET coating ( both side decorative type ) fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 63x38x1.48mm thick with rawl plug
(b) Middle and lock rail : 85x44x1.48mm thick
(c) Bottom rail : 114x44x1.48mm thick
(d) Top rail/style : 114x44x1.48mm thick
(e) Aluminium beading : 0.7mm thick
(g) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver, with S S hinges complete (h) Making good of wall surface to match with existing surface complete.
12
-
-
... More
S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire messs fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below:-
(i) Window frame :95x35mm X 1.48 mm thick for two tracks.
(ii) Top/bottom rail and style / rail of shutter: 19x38x1.48mm thick and over.
(iii) Aluminium beading - 0.7mm thick
(iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples.
(v) Aluminium fittings such aluminium suitable handle with auto interlocking closing
(vi) Making good of wall surfaces to match with existing surfaces complete all as specified and directed.
15
-
-
... More
S&F Powder coated aluminium sliding windows and frame with movable shutter ( sliding on minimum two PVC roller of best quality on two tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire messs fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below:- (i) Window frame :63x35mm X 1.48 mm thick for two tracks.
(ii) Top/bottom rail and style / rail of shutter : 19x38x1.48mm thick and over.
(iii) Aluminium beading - 0.7mm thick
(iv) Aluminium fittings such as aluminium suitable fittings for auto interlocking closing
(v) Making good of wall surfaces to match with existing surfaces complete all as specified and directed.
8
-
-
... More
S&F Powder coated aluminium ventilators box type with louvers & wire mess neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below:- (i) Window frame :63x35mm X 1.48 mm thick for two tracks.
(ii) Top/bottom rail and style / rail of shutter: 19x38x1.48mm thick and over.
(iii) Aluminium beading - 0.7mm thick
(iv) Aluminium neccessary fittings complete as required basis.
(v) Making good of wall surfaces to match with existing surfaces complete all as specified and directed.
2
-
-
... More
S&F for aluminium powder coated frame hollow sections members of size 63.50 mm x 38mmx 1.48 mm thick, 4 mm thick aluminium composite panel LDPE core with PET coating fixed with into the wall for kithen cabinet / cupboard shelf incl hanging self for clothes with aluminium clip/strips, pvc beadings fixed with adhesive on pvc edging, design of shelf as per site requirements basis, complete all neccessary fitting all as specified and directed
12
-
-
... More
S&F partition wall of powder coated aluminium hollow sections members of size 63.50 mm x38mmx 1.48 mm thick with distance of vertical hollow section, 1.2mtr to 1.8 mtr height of wall having top rails, bottom rails and middle rail of size 63.50 mm x 38mm x 1.48 mm and upto middle rail wall panels shall be covered by 5 mm thick aluminium composite panel LDPE core PET coating (both side decorative type) with aluminium clip height of middle rail shall be 1 meter from floor and remaining portion above middle rail shall be provided with 5 mm thick glass incl eaching approved designed with aluminium stiprs/beadings with rubber gasket as per existing or as provided complete all as specified and directed.
20
-
-
... More
S&F 12 mm thick toughned glass door with powder coated aluminium frame including neccessary locking, handle etc with double action floor spring in each shutter complete as requirement of site with suitable height and any type of eaching designed on tougned glass, off cuts complete with finishing wall in CM 1:4, designed approved by Engr-in Charge
7
-
-
... More
S&F 12 mm thick toughned glass partion wall with or without powder coated aluminium frame with any type of eaching designed on tougned glass, off cuts complete as requirement of site with arrangement for suitable height with off cuts complete all as specified and directed.
12
-
-
... More
M&L powder coated aluminum window/ doors grills fixing along with frame of following specification, grills with opening 69.4mm X 78.2mm grills thickness shall be of 6.4mm X 5.8mm having weight not less than 2.306 Kg/per sqm shape as ordered with frame channel of 34 X 11mm X 1.7mm thick fixed with screw inside of the window complete all as specified and directed.
20
-
-
... More
S&F in repair Venetian blind coloured strip 75 mm top 5 mm thick powder coated aluminium rod rod ends at brackets are moulded type etc complete all as directed.
14
-
-
... More
S& F in repair door closer hydraulically regulated Aluminium (extruded section body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed
10
-
-
... More
M & L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy dut fixed complete all as specified and directed.
8
-
-
... More
M&L for repairing to existing aluminium doors of any size by straightening of frame / shutter, replacing the detoriated member with new, replacing the broken / non funcional hinges with new, replacing decayed rubber gasket with new, replacing the broken glass pane of any size with new 5.00mm thick tinted glass, replacing unserviceable handle, tower bolt, lock, floor spring, foundation box with governing pivot, top pivot, peg stay etc with new and including taking down and at same place after making the door / window smooth functional complete all as specified and directed.
45
-
-
... More
M&L for E-board/ PVC false ceiling consisting of powder coated GI wall angle, main T and cross T of 25mmX 25 mm X 1.40 mm thick grid frame work, joist, angle/ Tee as directed and mild steel wire hook not less than 6 mm dia with arrangement for adjusting height of ceiling and including provn of 4 mm thick E- Classic board in pannelof size 600X600mm with necessary off cut including dismantling of existing false ceiling and taking down and refixing of Electric fitting carefully complete all as specified and directed.
80
-
-
... More
S&F in repair PVC hollow interlocking wall paneling of 5mm thick prelam PVC sheet. The panel & strips shall be of 600 kg / cbm density manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement complete all as specified and directed.
120
-
-
... More
Material & Labour providing and fixing in repair stainless steel railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.
100
-
-
... More
S&F in repairs Aluminium Composite (ALCO) panel exc 3 mm thick, jointed with screw, cutting, edging, and grooves finished using epoxy silicon composite Resin compound of any colour, fixed on flat or curved surface Incl Aluminium Strip 24mmx38mm complete all specified and as directed.
50
-
-
... More
S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed
40
-
-
... More
S & F 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed
60
-
-
... More
S&F 150mm size aluminium handles, cast type anodised completed all as specified and directed.
80
-
-
... More
S&F 100 mm size butt hinges medium weight stailess steel colled rolled complete all as specified and directed.
160
-
-
... More
S&F in repair 300mm, ordinary rat tail rod patttern springs includding roller and roller platewith fixed to wooden/pressed steel frame chowkats with flat iron 40x3mm size 75 cm long with necessary bolts, etc. complete all as specified and directed.
20
-
-
... More
S&F 300 mm long mild steel sliding door bolts plate type stone enamelled black with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed
40
-
-
... More
S&F rotational moulded polethylene water tank of 1000 ltrs capacity, ISI Marked (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I including dismantling of existing water tanks capacity n exc 1000 ltr complete all as specified and directed.
26
-
-
... More
S&F rotational moulded polethylene water tank of 500 ltrs capacity, ISI Marked (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I including dismantling of existing water tanks capacity n exc 500 ltr complete all as specified and directed.
18
-
-
... More
S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed
44
-
-
... More
S&F GI tube 15 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 15 mm dia & connections complete all as specified and directed.
120
-
-
... More
S&F GI tube 20 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 20 mm dia & connections complete all as specified and directed.
70
-
-
... More
S&F in repair 20 mm dia stainless steel 1.0 mm thick fancy type droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate c/s in each end & intermediate support complete all as specified and as directed
160
-
-
... More
S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 400mm including 15mm dia pillar tap, 450 mm long HDPE PVC connection, 750 mm long 32mm bore HDPE waste down pipe including Stainless steel brackets all as directed.
24
-
-
... More
S&F vitreous China corner wash hand basin, size 250 mm x187mm or suitable size & any design approved by GE including 15mm dia fancy CP pillar tap, 450 mm long HDPE PVC connection, 750 mm long 32mm bore HDPE waste down pipe including Stainless steel brackets all s directed.
2
-
-
... More
S&F in repairs vitreous chinaware coloured wash hand basin with pedestal of size 55X45X82cm complete including fancy CP pillar tap, CP Waste coupling, waste pipe, complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed.
12
-
-
... More
S&F in Vitreous China counter top oval type coloured wash basin suitable size including swan neck pillar taps with bottle trap ,but including waste pipe fixing on counter with stainless steel brackets complete all as specified.
4
-
-
... More
S & F in repair fancy type 150mm size square brass CP shower rose all complete all as specified and directed.
32
-
-
... More
S&F in repairs 15 mm dia pillar tap fancy type chromium plated complete all as specified as directed.
18
-
-
... More
S&F in repairs 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified as directed.
80
-
-
... More
S&F fancy type chromium plated brass two way bib cock with wall Flange suitable for 15mm bore pipe complete all as specified and directed.
6
-
-
... More
S&F in repair fancy type brass chromium plated toilet paper holder, complete all as specified as directed.
4
-
-
... More
S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.
36
-
-
... More
S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm, complete all as specified.Make Jaguar or equivalent
24
-
-
... More
S&F in repair stainless steel of AE - SI 316 grade tubular towel ring including apair of CP brass bracket complete all as specified.
9
-
-
... More
S&F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified.
6
-
-
... More
S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified.
5
-
-
... More
S&F in repairs of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as spd as directed
12
-
-
... More
S&F in repair 15 mm dia fancy type stop cock , chromium plated with long shank and cup (conncelaed type)for iron pipe or for unions and fixed complete all as spd as directed
12
-
-
... More
S&F in repairs Rimless Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings, Size: 360x675x750 mm, S Trap-300 mm including making good to floor complete all as specified and directed.
3
-
-
... More
S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified.
30
-
-
... More
S&F in repair vitreous china squatting pan of orrissa pattern long pan size 580 x 440 mm white with "P"or "S" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified. Make Hindware / parryware or equivalent
24
-
-
... More
S&F in repair vitreous China coloured European type WC with "P" or "S" trap white, including connection to drain or out going pipe and flush pipe anti symphonize pipes etc complete all as specified and directed.
6
-
-
... More
S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed. Model: Sleek fresh dual flush of Hindware Model No Pastel size 47.6x15.5x32, Parryware Cat No 8177*, Cera Cat No B1810110 snow white"
38
-
-
... More
S & F Brass CP health faucet with 8mm Dia 1.0 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body all as specified and directed.
10
-
-
... More
S&F in repair PVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.
22
-
-
... More
S&F in repair PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed by Engr-in-charge.
40
-
-
... More
S&F in repair PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fittingcomplete all as specified and directed.
60
-
-
... More
S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.
8
-
-
... More
S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.
6
-
-
... More
S&F PVC (SWR) 75 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.
4
-
-
... More
S&F PVC (SWR) 110 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.
4
-
-
... More
S&F in repair 600 x 450mm bevelled edge mirror 5.5mm to 6mm thick selected quality glass flaw less, firmly mounted on 6mm thick commercial ply wood backing and fixed to wooden plug with chromium plated brass screw and cup washer complete all as specified and directed.
26
-
-
... More
S&F in repair designed looking mirror size exc 0.54 sqm to 0.75 sqm of selected quality glass, mounted on 6mm thick fixed to wall with wooden plugs with chromium plated brass screws and cup washers, complete all as specified
6
-
-
... More
S & F in repair PTMT alloy toilet cabinet with mirror of overall size 350 x 450mm and fixed to wall complete all as specified and directed.
3
-
-
... More
S&F in repair 0.8 mm thick stainless steel kitchen sink size 590x 460x 230mm undermount, single bowl (bowl size 540x410x230 mm), including waste pipe & SS coupling, washers etc. complete all necessary fittings all as specified and as directed.
11
-
-
... More
S&F in repairs Stainless Steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plat rack, complete all as specified.
25
-
-
... More
S&F in repair MS steel work in tubular trusses for sign board posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St.-240, complete all as specified and directed.
1580
-
-
... More
S&F in repair Pre-coated galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.
160
-
-
... More
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixing FE 290 Gde E-165 complete all as spd as directed
220
-
-
... More
S & F 1.25 mm thick Mild steel, plain black sheet in steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc as required complete including cutting out of existing sheet if required all as spd as directed
8
-
-
... More
S&F for 0.71mm thick Aluminium plain sheeting Alloy 31000 H4, STUCCO Embossed finish with fixed with coach screw and Aluminium washer in roof and wall etc. with end laps stitched with 25x6mm G.I. bolts at 20cm apart incl dismantled also all as spd as directed
4
-
-
... More
M & L for cutting chases of hanging chajjas, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of sunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting out exc 10cm and not exc 40cm girth in RCC chajjas in brick walls complete all as specified and as directed.
120
-
-
... More
Dismantling of concrete by chiseling from RCC members like column , beam, parapet facia, chajja, ceiling,etc exposingthe reinforcement without disturbing the reinforcement free from rust by sand blasting/using chemical , apply a coat of rustolin to remove rust and acralic polymer on old rusted reinforcement proving at places addl reinforcement welding with existing reinforcement as directed wherever required binding RCC 50 mmx50 mm (10 mm gauge welded mesh ) & tack , securing with clips / blinding wire, welding & provision guniting pressure 2.2 to 2.5 kg /sqm with admixer 1 cement 3.5 of sand of thickness 25 to 40 mm including stripping floating with wooden strippers for proper dimension control neccssary form work & scaffolding up to three storey and including height of head room complete surface of guniting to be finished fair with 10 mm thick plaster in cement mortar 1:4 with water proofing compound @3% by weight of cement and recron 3 S as per manufacturer instruction cleaning & removing of waste meterial etc as dirply two coat of Dr fixit /pidilite new coat ezee at interval of 8 hours cure for the surfaces complete all as specified and as directed.
30
-
-
... More
M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.
46
-
-
... More
M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed.
80
-
-
... More
M&L for complete removal of existing treatment on walls etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of cement base paint over one coat of white wash complete all as specified and directed.
160
-
-
... More
M&L for preparing newly plastered walls surfaces and applying two coats of oil bound distemper over 1mm thick wall care putty complete all as specified and directed.
280
-
-
... More
M&L for complete removal of existing treatment on ceiling, etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of oil bound distemper over and including one coat of 1mm thick double coat wall care putty complete all as specified and directed.
280
-
-
... More
M&L for preparing newly plastered walls surfaces and applying two coats of cement base paint over a coat of white wash complete all as specified and directed.
190
-
-
... More
M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.
80
-
-
... More
M&L for complete removal of existing treatment on ceiling, etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of white wash complete all as specified and directed.
120
-
-
... More
Taking down carefully old U/S point wiring copper/Aluminum (light/ fan / sockets/ power), electric meter complete with switches, sockets, ceiling roses, lamp holders, brackets & other fitting & Fixtures connected, and making good to disturbed surfaces as directed.
117
-
-
... More
Taking down electric meter and disconnecting, removing to store for keeping in safe custody for refixing etc Complete all as specified & as directed.
2
-
-
... More
Fixing only and connecting electric meter upto 25 Amp(Item received form ser No 133 here in before) complete all as specified and as directed.
2
-
-
... More
M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100 volts, drawn through & including concealed 20 mm rigid non metalic PVC conduit with all accessories fixed on wall/ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switches, switch sockets, sockets, regulators etc with 3 mm thick hylum laminated sheet cover including cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed for:-
NOTE: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.
-
-
-
... More
One light point / Fan point / Exhaust point / Bell point controlled by one 5A switch
30
-
-
... More
One 5A flush type socket point on same board board
10
-
-
... More
One 5A flush type switch socket point on independent board
10
-
-
... More
One light point controlled by two way switch.
2
-
-
... More
All as per Srl item No 135 here in before but One 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for wiring and earth wire
5
-
-
... More
M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100volts, drawn through & exisiting rigid non metalic PVC conduit with all accessories fixed on wall/ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switches with 3 mm thick hylum laminated sheet cover plate in any size fixed on wall for fixing the switches, switch sockets, sockets, regulators etc complete all as specified for:-
NOTE: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.
-
-
-
... More
One light point / Fan point / Exhaust point / Bell point controlled by one 5A switch
30
-
-
... More
One 5A flush type socket out let point on same board board
10
-
-
... More
One 5A flush type switch socket point on independent board
10
-
-
... More
One light point controlled by two way switch.
2
-
-
... More
All as per Srl item No.137 here in before but One 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for wiring and earth wire
8
-
-
... More
S&F switch piano flush type single pole one way 5 Amps Complete all as specified & as directed.
80
-
-
... More
S & F in replacement of switch, piano flush type, single pole, one way, 5/6 Amps complete all as specified and directed.
10
-
-
... More
Supply and fix switch sockets combination 5 pin 5 Amps flush type 240 Volts AC complete all as specified and directed.
20
-
-
... More
S & F in replacement of Bell push, 5/6 Amps, 240 volts SP complete all as specified and directed.
10
-
-
... More
S&F switch Socket combination 2 in 1, 3 pin 5 Amp flush type.Complete all as specified & as directed. make- Havells, Anchor.
15
-
-
... More
S & F in replacement of Bell, DINGDONG type, 6 Amps, 240 volts, SP complete all as directed.
10
-
-
... More
S&F Lamp holder ( batten/angle ) PVC/Polycarbonate type with back plate for batten/angle fittings.Complete all as specified & as directed.
10
-
-
... More
S&F in repairs Lamp holder ( batten/angle ) PVC/Polycarbonate type with back plate for batten/angle fittings.Complete all as specified & as directed.
37
-
-
... More
S & F in replacement of Ceiling rose, PVC/polycarbonate insulated body type, 3 terminal, 240 volts, 5 Amps complete all as specified and directed.
20
-
-
... More
S & F in repairs Lamp LED 15 Watt 230 Volt complete all as specified and directed.
21
-
-
... More
S & F in repairs rechargeable Lamp LED 15 Watt 230 Volt complete all as specified and directed.
16
-
-
... More
S & F in repairs LED light fittings 20 Watt ( T-8 ), 4' complete with retrofit tube including connecting up with 3 core flexible copper conductor cable of suitable size Complete all as specified & as directed.
30
-
-
... More
S & F in repairs LED Tube light fittings 10 Watt (T-8 ), 2' complete with retrofit tube including connecting up with 3 core flexible copper conductor cable of suitable size Complete all as specified & as directed.
10
-
-
... More
S&F in repairs LED bulk head luminaire hexafit 10 watt LED environmental friendly, ultra modern, energy saving , surface mounted, decorative hexagonal bulk head back lit LED luminaries comprising of high brrightness LED complete all as specified & as directed.
Make: C&S/Havells/Bajaj/Phillips/ Crompton as approved by GE.
5
-
-
... More
S & F in repairs surface mounted LED down lighter 15 W LED height 57 - 60 mm with white powder coated aluminium housing with integratged electronic diffuser complete all as specified & as directed. Make: C&S/Havells/Bajaj/Phillips / Crompton as approved by GE.
5
-
-
... More
S &F in repairs Recess mounting LED ultra slim Ceiling light 2'X2', 35/36 Watt complete all as specified and directed..Make: C&S/Havells/Bajaj/Phillips / Crompton as approved by GE.
22
-
-
... More
M & L in repairs sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 2.5 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 2.5 sqmm as earth continuity conductor drawn in & including PVC conduit all as directed.
50
-
-
... More
M & L in repairs sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn in & including PVC conduit all as directed.
50
-
-
... More
M & L in repairs sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn in & including PVC casing & capping complete all as specified and as directed.
40
-
-
... More
M & L in repairs for sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through in & including PVC conduit complete all as specified and as directed.
40
-
-
... More
M & L in repairs for sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through in & including PVC casing & capping complete all as specified and as directed.
40
-
-
... More
M & L in repairs sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn in existing conduit all as directed.
40
-
-
... More
M & L in repairs sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn in existing conduit all as directed.
40
-
-
... More
S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 4 way, 240 Volts double door single pole & neutral with 200 Amps rated bus bar complete all as specified and as directed.
4
-
-
... More
S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 8 way, 240 Volt, double door single pole & neutral with 200 Amps rated bus bar complete all as specified and as directed.
2
-
-
... More
S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 12 way, 240 V, double door single pole & neutral with 200 Amps rated bus bar Complete all as specified & as directed.
1
-
-
... More
S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 4 way, 415V, double door tripple pole & neutral with 200 Amps rated bus bar Complete all as specified & as directed.
2
-
-
... More
S&F in repairs MCB 415V, 10KA, TPN , 63Amps to 100Amp complete all as specified and directed.
14
-
-
... More
S&F in repairs MCCB 415V, 16KA, 4 Pole , 63-100 Amps to 100Amp complete all as specified and directed.
2
-
-
... More
S&F in repairs MCB single phase and neutral 16A-63A, 230V 10KA. B' curve type complete all as specified and directed.
9
-
-
... More
S&F in repairs MCB SP 6A-32A, 230V. 10KA. B' curve type complete all as specified and directed
30
-
-
... More
S & F in repairs Cable weather proof flat twin core with aluminium conductor multi stranded of size 10 sqmm, 1100Volts grade complete all as specified and directed.
60
-
-
... More
M&L for Earthing complete with using GI earth plate electrode 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness off 15 cm all around the plate with using 4 mm dia GI Wire as earth lead moulded and retreived to earth plate at one end and connected to main switch / control board at another end with and including 15 mm dia GI light grade from upper end of earth plate upto external face of the wall of the building including 20 mm dia bore GI pipe light grade as water pipe from chamber to upper edge of the plate GI funnel with wire mess fixed on water pipe and provison of PCC 1:2:4 type B-1 (Using 20 mm Dia graded stone aggregate) duly reinforced with mild steel round bar 6 mm dia @ 150 mm c/c both ways with 10 mm dia mild steel bars as in lifting handle with and including necessarry excavation and earth work including laying the pipe concealed in floor / wall allas per plate NO-3 of SSR Part-I complete all as specified and directed and testing on completiopn (Note:- If the desired resistance is not found earthing shall be done by the contractor at no extra cost to Govt).
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements