Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Civil And Construction
Pipe Line Project
Water Storage And Supply
Eprocure
Opening Date27 Nov 2024
Closing Date26 Dec 2024
Tender Amount₹ 94,00,000
Costs
EMD
₹ 1,66,000Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_685961_1Tender No
87451/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Excavation in hard standing for crossing the road as per the authorized width for taking out/laying/cleaning/repairing of CI/GI pipe lines all as directed including making good the road cut to match with the existing surface either with bituminous macadam or with PCC 1:2:4, type B-2(using 40mm graded crushed stone aggregate) complete all as specified and directed.
10
-
-
Taking out/ up unserviceable CI/DI rusted/ broken pipe line (including all fittings) with spigot and socket/ Flanged ends and removal from site including burning out joints and recovering lead complete all as specified and directed for the following sizes/bores of pipes :-(Earth work shall be measured and paid separately).
-
-
-
150mm bore dia
192
-
-
100mm bore dia
352
-
-
Laying and jointing only in trenches old serviceable CI/DIpipe with spigot and socketed ends complete after cleaning properly/thoroughly & removal of all blockage removing all silt and deposited organics inside using bamboo or rod with brush complete all as specified and directed for the following sizes/bore of pipes :-
-
-
-
150mm bore dia
50
-
-
100mm bore dia
60
-
-
Supply laying and jointing in trenches ductile iron (DI) pipe with spigot and socketed ends centrifugally cast class 'K-7' in any length laid in trenches complete all as specified and directed for the following sizes/bore of pipes (DI fittings and jointing materials shall be measured and paid separately) :-
-
-
-
150 mm bore dia
192
-
-
100 mm bore dia
352
-
-
M&L for actual detecting the leakage of existing CI/DI pipe any type including excavation upto one cum and repairing the joint with new run lead & jute/wool refixing after testing for leakage proof pipe line and including returning filling and making good disturbed surface complete for following bore of CI/DIpipe line :-
-
-
-
150 mm bore
80
-
-
100 mm bore
120
-
-
80 mm bore
50
-
-
All as per item No.08 here-in-before but by using old retrived lead for the following bore of CI/DI pipe line
-
-
-
150 mm bore
35
-
-
100 mm bore
38
-
-
80 mm bore
36
-
-
Supply, fixing, jointing and testing of cast iron non return valve flanged ends as per IS-5312 (ISI Marked) complete with washer nuts/ bolts and rubber gasket complete including taking down unserviceable non return valve complete all as specified and directed for following bore of CI pipe line.
-
-
-
150mm bore dia
6
-
-
100mm bore dia
2
-
-
M&L for rubber gasket joint suitable for DI pipe and fittings with size of nuts, washer & bolts etc complete all as specified and directed for the following sizes :-
-
-
-
150 mm bore
55
-
-
100 mm bore
120
-
-
M&L for upto 150 mm bore ductile iron (DI) fittings such as bends (any type, radius and angle) tapers any type,(straight, bend, increasing, decreasing or double socket etc) tee pieces single branch, “Y” junction, double branch, cross (all sockets or socket and spigot) collars, flanged spigot,caps and plugs complete all as specified and directed.
250
-
-
M&L for actual detecting the leakage of existing GI pipe line any type laid in trenches/ wall/ floor including excavation upto one cum taking out existing pipeline and repair including replacement of GI fitting such as tee, socket, reducer, elbow, union, etc complete and refixing after testing for leakage proof pipe line and including returning filling and making good disturbed surface complete for following bore of GI pipe line :-
-
-
-
40 to 50 mm GI pipe
250
-
-
15 to 25 mm GI pipe
500
-
-
Taking up or down steel water tubing and connections including clearing the pipes free from scaling for reusing the same complete all as directed for the following sizes :- Note :-Excavation will be measured and paid separately
-
-
-
50 mm dia bore
175
-
-
40mm dia bore
235
-
-
25 mm dia bore
550
-
-
20 mm dia bore
500
-
-
15 mm dia bore
220
-
-
Relaying/refixing jointing of old serviceable steel tubing and connection in new or old position including necessary cuttings, threading, and new fittings such as bends, elbows, socket nipples, tapers, and reducers etc complete all as specified and directed
-
-
-
50 mm dia bore
25
-
-
40 mm dia bore
35
-
-
25 mm dia bore
50
-
-
20 mm dia bore
50
-
-
15 mm dia bore
20
-
-
Supply laying and jointing of steel water tubing GI medium grade ISI marked with all fittings laid in trenches or fixed to wall etc complete all as specified and directed for the following sizes:- Make: Jindal/Prakash/Swastik Note :- Excavation and earth work will be measured and paid separately.
-
-
-
50 mm dia bore
150
-
-
40 mm dia bore
200
-
-
25 mm dia bore
500
-
-
20 mm dia bore
450
-
-
15 mm dia bore
200
-
-
S&F Gun metal gate valve ISI marked with iron wheel head screwed both ends for iron pipes and fixed complete all as specified and directed for the following sizes including taking down of unserviceable gate valves.
Make : Zoloto/Seico/Jindal/Upadhaya/Venus
-
-
-
50 mm bore
35
-
-
40 mm bore
50
-
-
25 mm bore
65
-
-
20 mm bore
65
-
-
15 mm bore
30
-
-
S&F 15 mm dia PVC bib tap with crutch handle screwed down screwed for iron pipe including taking out unserviceable tape of 15mm dia complete all as specified and directed.
50
-
-
Supply, fixing, jointing and testing in repair of cast iron sluice valve class I (ISI MARKED) PN-1.6 type latest IS 14846-2000 flanged ends, drilled having stainless steel spindle with cast iron wheel head at top complete with nuts, bolts, washer and rubber gasket etc complete including taking down unserviceable sluice valve complete all as specified and directed for following bore of CI pipe line :-
-
-
-
150 mm dia bore
6
-
-
100 mm dia bore
5
-
-
S&F in replacement non clog submersible pump controller in sheet enclosure Type MU-G6 DOL for three phase motor 415 volts, 50 HZ, 5 HP, 6-10 Amps relay range including suitable size LT panel, outdoor type, for mounting/fixing the pump controller, cubical compartmentalised of 2mm thick CRCA sheet powder coated front door openable with angle iron 45x45x5 mm frame bottom of the panel board, grouted by using PCC foundation 1:2:4 type C1 with 20 mm graded stone aggregate, thimbling and cable entry boxes with cable gland inculding painting with two coat of powder coated painting over a coat of red oxide primer complete all specified and directed. Make Cat Part No. SS97756COVO of L&T or equivalent in Legrand
5
-
-
S&F in replacement submersible pump controller in sheet enclosure Type MU-G50 fully autimatic Star Delta Starter for single phase motor 415 volts, 50 HZ, 3 phase, 20 HP, 15 KW, 28-42 Amps relay range complete all as specified and directed.
Cat Part No. SS95975 of Make L&T or equivalent in Legrand
3
-
-
M&L for disconnecting the booster pump of any capacity from site and servicing / repairing the same by replacing coupling including nut/bolts, bearing, bushes, oil seals and reassembling and re-alignment, commissioning and testing complete all as specified and directed by Engineer-in-charge.
3
-
-
Dismantling old broken / damaged valve pit chamber and construct valve pit chamber of size 1050mm x 1050 mm x 1050 mm (internal dimension) complete including excavation and earth work, PCC 1:4:8, type D-2 using 40mm graded stone aggregate, brick work in cement mortar 1:6, plastering in cement mortar 1:4 (internally) and including 3mm thick mild steel sheet cover and painting with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
2
-
-
Dismantling old broken / damaged valve pit chamber and construct valve pit chamber of size 900mm X 900 mm X 900 mm (internal dimension) complete including excavation and earth work, PCC 1:4:8, type D-2 using 40mm graded stone aggregate, brick work in cement mortar 1:6, plastering in cement mortar 1:4 (internally) and including 3mm thick mild steel sheet cover and painting with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
2
-
-
Taking up or down PVC pipe and connection laid in trenches or floors or fixed to walls complete with all fittings etc complete all as specified and directed of following sizes of pipe :- (Note -Earthwork shall be measured and paid separately under respective item of schedule 'A').
-
-
-
160 mm outer dia
50
-
-
90 mm outer dia
50
-
-
75 mm outer dia
100
-
-
Supply laying and jointing of unplasticised PVC heavy duty pipes with working pessure 6 Kg/SqCm and certified with ISI standards with all fitting such as elbow, tee, socket, reducer, MTA complete of suitable size laid in trenches complete with solvent of the following size with all fitting complete all as specified and directed :-
-
-
-
160 mm outer dia
50
-
-
90 mm outer dia
50
-
-
75 mm outer dia
100
-
-
M&L for actual detecting the leakage of existing PVC pipe including suitable excavation and repairing the joint with solvent and including all suitable fittings complete and testing for leakage proof pipe line and including returning filling and making good disturbed surface complete for following bore of PVC pipe line :-
-
-
-
160 mm bore
50
-
-
110 mm bore
40
-
-
90 mm bore
30
-
-
75 mm bore
60
-
-
S&F 32 mm dia hydrant opener made out of GI pipe 32 mm dia medium grade including welding handle rod of 10 mm dia and 450 mm long including taking down old unserviceable opener complete all as specified and directed.
10
-
-
S&F in replacement of sprinkler with single discharge nozzle 9 mm bore and all fitting including taking down unserviceable sprinkler complete all as specified and directed make : .Premier / ZM-22 or equivalent.
10
-
-
Supply and fixing in replacement hydraunt (quick coupling valve) made out of aluminium alloy with plastic powder coating and having positive action, self closing spring loaded brass valve arrangement the out let having hinged rubber lid, inlet size 40mm with 32mm out let including taking down unserviceable hydraunt with complete fitting complete all as specified and directed. Make : Drip N Drip/Premier or equivalent.
50
-
-
S&F in replacement of service outlet having two half clamp made out of MS strip of 6 mm thick with nut bolt and rubber sealing ring suitable to fit for PVC pipe, the out let shall be threaded 40 mm size to suit the inlet of hydraunt complete all as specified and directed.
25
-
-
M&L for testing of water sample (biological and chemical analysis) from MNNIT or any reputed Govt laboratory. The sample of water will be collected from different pump houses located at Air Force station, Bamrauli in suitable sterlised bottle as intimated by reputed government laboratory and the water will be tested for PH, turbidity, acidity. Akalinity, TDS, TSS, TS, Chlorides, Total Hardness, MPN, Fe, As, F complete all as specified and directed by Engineer-in-Charge. Note : Sample of water to be collected in Presence of Engineer-in-charge or JE E/M and Sample shall be forwarded to Lab duly sealed the sample bottle by Engineer-in-Charge. The Lab will be selected by Engineer-in-Charge and testing shall be done on every three month for all pump houses.
36
-
-
Supply and fix in replacement of high pressure single head adjustable chlorine dosing system including FRP pressure dosing tank of capacity 100 ltrs consisting of water inlet line, outlet with Y strainer, drian, overflow, conical bottom for sludge deposition , pot hole with cover, level gauage with Agitation motor 120 watts 960 RPM, single phase flange mounted motor with plastic shaft and impeller connected to FRP service dosing tank of capaicty 100 lts consisting of water inlet line, Dozing injector 230V, 50Hz including on/off switch and stokes/ Minute of Max 135 Min. 15 with motor, discharge pressure 10Kg/Sqcm, High flow rate of 0-25 LPH including drain, overflow level gauge, inspection port, Agitator motor 120 Watts 960 RPM single phase flange mounted with plastich shaft and impeller including mounting lid, complete all as directed. Make: AQUAFIT and equivalant as per appendix 'B'
5
-
-
Taking out submersible pumping set of capacity 05 to 10 HP, three phase, any type from bore well by disconnecting all electrical and mechanical connections including connected items of pump such as column pipes complete for checking, disconnecting cable and pump including lowering & reassembling the pump in the existing position by reconnecting after repair/inspection of pump including packing materials, nut bolts, securing of submerssible in column pipe by using insulated wires, cable jointing materials etc, testing and commissioning all as directed by Engr-in-Charge
10
-
-
All as per item No. 34 here-in- but 15 to 20 HP capacity
8
-
-
All as per item No. 34 here-in- but 30 HP to 40 HP capacity
10
-
-
M&L for disconnecting the booster pump of any capacity from site and servicing / repairing the same by replacing coupling including nut/bolts, bearing, bushes, oil seals and reassembling and re-alignment, commissioning and testing complete all as specified and directed by Engineer-in-charge.
6
-
-
Taking out submersible pumping set/ open well jet pumping set of any capacity, any size/ type from bore well by disconnecting all electrical and mechanical connections including connected items of pump such as column pipes, cable complete for checking & repair of pump including lowering & reassembling the pump in the existing position by reconnecting after repair/inspection of pump complete all as specified and directed
15
-
-
M&L for Repair/overhauling of submersible pump set of capacity 5 to 10 HP by opening/de-asembling the pump including derusting, descaling, servicing, oiling/greasing & including replacement of worn out defective spare parts such as GI washer, nuts, bolts, packing and other minor parts not specifically mentioned shall be replaced where required for proper functioning of pump set including re-assembling in the existing position, testing complete all as specified and directed by Engr-in-Charge.
Note :- (i) Spare parts shall be measured and paid separatly under respective item of sch "A".
(ii) Rates for wshers, studs&nuts, nut & bolts and packing materilals and other minor spare parts shall be included in this item.
6
-
-
All as per item No.39 here-in- but 15 to 20 HP capacity
4
-
-
All as per item No. 39 here-in- but 30 HP to 40 HP capacity
6
-
-
M&L for repair/overhauling of submersible pump/ open well submersible pump of capacity 1 HP to 10 HP by opening/de-asembling the pump including derusting, descaling, servicing, oiling/greasing & including replacement of worn out defective parts, required GI washer, nuts, bolts and other minor parts not specifically mentioned shall be replaced where required for proper functioning of pump set complete all as specified and directed by Engr-in-Charge.
Note :- (i) Rates for washers, studs &nuts, nut & bolts and packing materilals and other minor spare parts shall be included in this item.
10
-
-
Supply only spare parts required for repair/ overhauling of pumps 5 to 10 HP vide Sch `A' Item No. 39 here-in- before :-
-
-
-
NRV
4
-
-
Bowl body CI
6
-
-
Stage sleeve for S/S in stage bowl
6
-
-
Bearing bush in stage bowl
6
-
-
Gun Metal impeller of suitable dia
4
-
-
Impeller key
3
-
-
Pump motor connector CI
4
-
-
Gun Metal neck ring
6
-
-
Pump shaft stainless steel
4
-
-
Coupling of suitable dia with key
3
-
-
Stud and nut
10
-
-
Supply only spare parts required for repair/ overhauling of pump 15 to 20 HP vide Sch `A' Item No. 40 here-in- before :-
-
-
-
NRV
3
-
-
Bowl body CI
6
-
-
Stage sleeve for S/S in stage bowl
6
-
-
Bearing bush in stage bowl
4
-
-
Gun Metal impeller of suitable dia
6
-
-
Impeller key
6
-
-
Pump motor connector CI
6
-
-
Gun Metal neck ring
3
-
-
Pump shaft stainless steel
4
-
-
Coupling of suitable dia with key
4
-
-
Stud and nut
10
-
-
Supply only spare parts required for repair/ overhauling of pumps 30 HP to 40 HP vide Sch `A' Item No. 41 here-in- before :-
-
-
-
NRV
5
-
-
Bowl body CI
6
-
-
Stage sleeve for S/S in stage bowl
8
-
-
Bearing bush in stage bowl
8
-
-
Gun Metal impeller of suitable dia
8
-
-
Impeller key
6
-
-
Pump motor connector CI
6
-
-
Gun Metal neck ring
4
-
-
Pump shaft stainless steel
5
-
-
Coupling of suitable dia with key
5
-
-
Stud and nut
20
-
-
S&F of stator set of submersible motor for 30 HP duly winded with PVC insulated wire and including taking out existing unserviceable stator set complete all as specifed and directed. Make: KSB/ SU/ Kalama
1
-
-
S&F rotor for submersible motor submersible motor suitable for 30 HP including taking out existing unserviceable rotor complete all as specified and directed. Make: KSB/ SU/ Kalama
1
-
-
M&L for rewinding of electric motor 3 phase, 415 Volts, 50 C/S, of capacity 2 HP to 10 HP of booster pump of any make from the pumping set, rewinding the stator coil with PVC insulated/super enamelled copper winding wire of existing type, guage and size including insulating material and reassembling and refixing the same with true alignment, testing and commissioning complete all as specified and directed..
50
-
-
M&L for rewinding of electric motor 3 phase, 415 Volts, 50 C/S, of capacity 2 HP to 10 HP of open well submersible pump of any make from the pumping set, rewinding the stator coil with PVC insulated copper winding wire of existing type, guage and size including insulating material and reassembling and refixing the same with true alignment, testing and commissioning complete all as specified and directed..
60
-
-
M&L for rewinding of electric motor of submersible pump any make and any type of capacity 1 HP with PVC insulated copper winding wire suitable gauge/size matching to existing straightening and repairing/ claning of stator slots properly by using adequate size of sand paper including insulating materials complete all as specified and directed.
4
-
-
M&L for rewinding of electric motor of Tullu pump any make and any type of capacity 1 HP with PVC insulated copper winding wire suitable gauge/size matching to existing straightening and repairing/ claning of stator slots properly by using adequate size of sand paper including insulating materials complete all as specified and directed.
3
-
-
M&L for rewinding of electric motor of submersible pump any make 3 phase, 415V, 5 to 10 HP with PVC insulated heavy duty superior quality copper winding wires of suitable gauge/size matching to existing, straightening and replacement of U/s spares, cleaning of stator slots properly by using adequate size of sand paper including insulating materials complete all as specified and directed. Note: Spares reqd for the same will be measured and paid separately under relevant item
2
-
-
All as per item No.52 here-in- but 15 to 20 HP capacity
6
-
-
All as per item No.52 here-in- but 30 HP capacity
3
-
-
All as per item No.52 here-in- but 41 HP capacity
2
-
-
Supply only spare parts required for repair of motor 5 HP to 10 HP vide Sch `A' Item No. 52 here-in- before :-
-
-
-
Thrust plate
3
-
-
Segment bearing complete set
2
-
-
Segment housing body CI
2
-
-
Lower bush body
3
-
-
Upper bush body
3
-
-
Pump connector
3
-
-
Upper bearing body
4
-
-
Lower bearing body
4
-
-
S/S sleeve for rotar shaft
2
-
-
Oil seal
2
-
-
GM Bush for submersible motor pump
4
-
-
Sand guard
2
-
-
Supply only spare parts required for repair of motor 15 HP to 20 HP vide Sch `A' Item No. 53 here-in- before :-
-
-
-
Thrust plate
5
-
-
Segment bearing complete set
4
-
-
Segment housing body CI
4
-
-
Lower bush body
3
-
-
Upper bush body
4
-
-
Pump connector
4
-
-
Upper bearing body
2
-
-
Lower bearing body
2
-
-
S/S sleeve for rotar shaft
4
-
-
Oil seal
2
-
-
GM Bush for submersible motor pump
2
-
-
Sand guard
2
-
-
Supply only spare parts required for repair of motor 30 HP to 40 HP vide Sch `A' Item No. 54 & 55 here-in- before :-
-
-
-
Thrust plate
4
-
-
Segment bearing complete set
3
-
-
Segment housing body CI
3
-
-
Lower bush body
2
-
-
Upper bush body
4
-
-
Pump connector
4
-
-
Upper bearing body
3
-
-
Lower bearing body
2
-
-
S/S sleeve for rotar shaft
2
-
-
Oil seal
4
-
-
GM Bush for submersible motor pump
4
-
-
Sand guard
4
-
-
S&F in replacement of Mild Steel column pipe flanged both ends 125 mm dia complete with necessary fixing arrangement such as suitable size of nuts, bolts, gasket, washer, etc complete 3 mtr long and 6 mm thick complete all as specified and directed. Make - Jindal/ Swastik/ Tata/ Prakash.
6
-
-
S&F in replacement of Mild Steel column pipe flanged both ends 100 mm dia complete with necessary fixing arrangement such as suitable size of nuts, bolts, gasket, washer, etc complete 3 mtr long and 6 mm thick complete all as specified and directed. Make - Jindal/ Swastik/ Tata/ Prakash and equivalant as per appendix 'B'
4
-
-
S&F in replacement of PVC insulated flat copper submersible cable heavy duty 3 core 1100 volt grade complete all as specified and directed of the following size . Make - Havells/ Plaza/ Finolex
-
-
-
2.5 Sqmm
90
-
-
16 Sqmm
330
-
-
S & F in replacement MCCB 4 Pole, 200 Amps, Thermal release 160-200, 36 KA 415 volt grade complete and connecting with pump controller panel complete all as specified and directed. Make Cat part No CM98065OONO of L&T and equivalant as per appendix 'B'
5
-
-
S&F MCB, TPN 63 Amps, 240 volts 10 KA complete all as specified and directed
10
-
-
S&F MCB SPN 25 to 63 Amp, 240 volts 10 KA complete all as specified and directed
12
-
-
S&F in replacement single phase preventer, 380V, complete all as specified and directed. Make: Minilec/ Asian/L&T and equivalant as per appendix 'B'
10
-
-
S&F in replacement MN-5 Relay Direct operated direct mounting, 380V, suitable for MU-G30/40/50 complete all as specified and directed.
cat part No SS94136OOTO of L&T and equivalant as per appendix 'B'
8
-
-
S&F in replacement Terminal Block 30A - 5 way suitable for MR G2 complete all as specified and directed. cat part No CS96032 of L&T and equivalant as per appendix 'B'
2
-
-
S&F in replacement Terminal Block 60A - 3 way suitable for MU-G10/20 complete all as specified and directed
cat part No CS94806OOOO of L&T and equivalant as per appendix 'B'
1
-
-
S&F in replacement Terminal Block 100A - 3 way suitable for MU-G30/50 complete all as specified and directed. cat part No CS94338OOOO of L&T and equivalant as per appendix 'B'
2
-
-
S&F in replacement of Indicating lamp Red/ Green, 415V suitable for MU-G30/50 complete all as specified and directed. cat part No CS94810DOOO of L&T and equivalant as per appendix 'B'
4
-
-
S&F in replacement of Volt-Ammeter 500V, 0-100A complete all as specified and directed. cat part No CS90056OOOO of L&T and equivalant as per appendix 'B'
1
-
-
S&F in replacement of Rocker switch (For MU-G30 to MU-G75) complete all as specified and directed. cat part No CS90272OOOO of L&T and equivalant as per appendix 'B'
2
-
-
S&F in replacement of Electronic Star-Delta Timer type ST100 160 - 500V, for 3 - 30 sec, complete all as specified and directed. cat part No ST80328OOOO of L&T and equivalant as per appendix 'B'
4
-
-
S & F in replacement of ML-1 Thermal over load relay 6-10 Amps range complete all as specified and directed.
Cat part No. SS91858OOVO of Make L&T and equivalant as per appendix 'B'
2
-
-
S & F in replacement of ML-1 Thermal over load relay 10-16 Amps range complete all as specified and directed.
Cat part No. SS91858OOBO of Make L&T and equivalant as per appendix 'B'
2
-
-
S & F in replacement of ML-2/ ML-3 Thermal over load relay 20-32 Amps range complete all as specified and directed.
Cat part No. SS91859OOEO of Make L&T and equivalant as per appendix 'B'
2
-
-
S & F in replacement of ML-3 Contact Kit for power contactor complete all as specified and directed. Cat part No. SS95309 of Make L&T and equivalant as per appendix 'B'
4
-
-
S & F in replacement of ML-4 Contact Kit for power contactor complete all as specified and directed.
Cat part No. SS95311 of Make L&T and equivalant as per appendix 'B'
5
-
-
S & F in replacement of Coil for ML-3 Power Contactor complete all as specified and directed.
Cat part No. SS90545 of Make L&T and equivalant as per appendix 'B'
2
-
-
S & F in replacement of Coil for ML-4 Power Contactor complete all as specified and directed.
Cat part No. SS91258 of Make L&T and equivalant as per appendix 'B'
2
-
-
S & F in replacement of contactor ML-4 Power Contactor Cat part No. SS90910 of Make L&T and equivalant as per appendix 'B'
4
-
-
S&F in replacement of MCB SP range 6 to 32 Amp, C curve, 10 kA complete all as specified and directed.
6
-
-
S&F in replacement of MCB TP range 32 Amp, C curve, 10 kA complete all as specified and directed.
3
-
-
S & F in replacement of MCB TPN range 40 Amp, C curve, 10 kA complete all as specified and directed.
3
-
-
S & F in replacement of Copper Lugs 16 sqmm complete all as specified and directed.
50
-
-
S & F in replacement of Copper Lugs 35 sqmm complete all as specified and directed.
50
-
-
S & F in replacement of Copper spreader terminal 4 pole complete all as specified and directed
Cat part No. ST98066OOOO of Make L&T and equivalant as per appendix 'B'
2
-
-
S & F in replacement of 36 µF MFD, 440V run capacitor spare cyclinderical condensors with wire complete all as specified and directed.
Cat part No. LTCCMRW036B2 of Make L&T and equivalant as per appendix 'B'
2
-
-
S & F in replacement of 150 µF MFD, 440V start capacitor spare cyclinderical condensors with wire complete all as specified and directed.
Cat part No. LTCCMSW150P2 of Make L&T and equivalant as per appendix 'B'
2
-
-
S & F in replacement non clog submersible pump controller in sheet enclosure Type MU-G6 DOL for three phase motor 415 volts, 50 HZ, 6 HP, 9-14 Amps relay range including suitable size LT panel, outdoor type, for mounting/fixing the pump controller, cubical compartmentalised of 2mm thick CRCA sheet powder coated front door openable with angle iron 45x45x5 mm frame bottom of the panel board, grouted by using PCC foundation 1:2:4 type C1 with 20 mm graded stone aggregate, thimbling and cable entry boxes with cable gland inculding painting with two coat of powder coated painting over a coat of red oxide primer complete all specified and directed. Make Cat Part No. SS97756COAO of L&T or equivalent in Legrand
4
-
-
S & F in replacement PVC insulated with 1.5 sq mm 3 core, FRLS PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volt, conforming to IS 694 complete all as directed.
180
-
-
S & F in replacement PVC insulated with 6 sq mm 4 core, FRLS PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volt, conforming to IS 694 complete all as specified and directed.
180
-
-
Supply, testing and commissioning of pressure pump of capacity 1HP, single phase complete with air tanks, pressure control switch, pressure guage, brass assembly etc with all necessaray connection including taking out of existing unserviceable pressure pump complete all as specified and as directed by Engineer-in-charge. Make: KSB/ Kirloskar and equivalant as per appendix 'B'
2
-
-
Supply, testing and commissioning of Submersible pump of capacity 1 HP, single phase complete etc with all necessaray connection including taking out of existing unserviceable submersible pump complete all as specified and as directed by Engineer-in-charge. Make: Kirloskar/ KSB/ Crompton and equivalant as per appendix 'B'
2
-
-
M&L for rewinding of pressure pump 0.5 HP to 1 HP of any make, single phase, 240V with PVC insulated heavy duty superior quality copper winding wires of suitable gauge/size matching to existing, straightening and replacement of u/s spares cleaning winding slots properly by using adequate size of sand paper including insulating materials complete all as specified and directed. Note: Spares items reqd for the same will be measured and paid separately under relevant item.
4
-
-
S & F in replacement of the following spare parts suitable for pressure pump 0.5 to 1HP complete all as specified :-
-
-
-
Pressure switch
5
-
-
Oil seal
4
-
-
Ball bearing (set of two)
3
-
-
Impellar
3
-
-
Monthly checking and servicing of pressure pumps 0.5HP to 1HP, 230 Volts, 50Hz includes tightenen loose connection, nut bolts alongwith all other primary safety features for smooth functioning of pump complete all as specified and directed by Engineer-in-charge NOTE:- 1. Checking of pressure pump on monthly basis will be kept in written record also charges for same will be deemed in quotated rates. 2. Complaints as received verbal/ telephonically for unserviceable pressure pumps should be attended within 02 hours throughout the contract no extra charges will be paid in this account. 3. Spares other than srl No 35 will be deemed in quoted rates.
5
-
-
Dewatering the fountain, cleaning of fountain & fountain motor well complete, removing the algae, moss, roots, vines, clean out the cracks with wire brush, wash the concrete floor with acid, making the surface dust proof for filling the cracks with resin epoxy, cleaning the pipings, light fittings, nozzles for clearing the blokages, replacement of unserviceable wiring of water proof light fitting and spot light fittings, cutting removing or welding to MS/GI pipings for leak arresting as required at site, cutting removing the old unserviceable PVC fittings and replacement of PVC fittings with heavy duty ISI marked PPR pipe and fittings such as Tee, elbow, MTA, coupling , reducer, sockets of any size etc. painting to the MS & GI pipings inside the fountain with synthetic enamel paint of colours as directed. .
12
-
-
after scrapping , scraching the existing suface and making good and disturbed surface with required PCC (1:2:4) type B-1, filling up with water up to the desired level and testing and adjusting the nozzles for correct functioning all as directed by Engr-in-Charge. Note : (i) PPR pipes and Cable for wiring as required will be measured and paid under relevent item of schedule.(ii) The above job will be operated as and when required at site for smooth functioning of the fountain during the entire period of contract for each fountain.(iii) Payment for this item shall be made on completion of the contract period
6
-
-
S & F in replacement vertical jet nozzle (ISI Marked) 40mm inlet dia and 80mm outlet opening made out of brass chromium plated (as per sample) suitable for the fountain complete all as specified and directed.
6
-
-
S&F in replacement of crown nozzle adjustable type (ISI Marked) made out of brass and chromium plated complete all as directed by Engr-in -Charge
50
-
-
S&F in replacement dandalion rod made out of aluminium alloy 60 cm long 12mm dia and cleaning and adjusting the nozzles (As per sample) complete all as specified and directed by Engr-in-charge.
20
-
-
S&F in replacement of Fountain Light With Stand (Jumbo) 12V 30 watts, MultiColor AutoColor Change, AUSTIN Jumbo Fountain SS SMD(LED) Light With Stand (100% Water Proof ,Resin Filled), complete all as specifed and directed.
33
-
-
S&F in replacement of water proof under water tight light fitting 9 X 3 watt power LED in put 9 V DC 27 watts, fully stainless steel 304 body, with 6mm PC glass in multicolours of white- warm-yellow-green-blue.Protection IP-68 including including required AC to DC converter/ driver etc complete all as specified and directed. Cat part No. AT-00117 of Make Aquarius , Bajaj/Cromption Greaves and equivalent as per appendix 'B'.
25
-
-
S&F in replacement of LED controller for fountain input 220volts output 12V DC, 5 Amp with on off switch push button for changing light 5 to 10 Nos LED light operator in belt PCB etc complete all directed and specified.
5
-
-
M & L for detecting the fault on LT panel/ submersible pump controller/ submersible pump/booster pumps sets etc, rectifying the defect on relays, metering devices, tightning the electrical accessories with required insulation materials, measuring and recording values of votage, ampere, earth resistance, checking of motor and pumps for its correct functioning etc based on day to day complaints all as specified and direceted by Engr-in-Charge. Note : (Spare parts required for the same will be measured and paid separatly under relevant item)
70
-
-
S & F Tullu pump of capacity 1.5HP, single phase complete etc with all necessaray connection including taking out of existing unserviceable Tullu pump complete all as specified and as directed by Engineer-in-charge. Make: Kirloskar/ KSB/ Crompton and equivalent as per appendix 'B'.
1
-
-
Supply & fixing or fabricated of SS frame glow sign boards on retrofit sheet size 1500mm X 750mm duly indicating the name of installation and logo of MES with suitable redium stencil and necessary items for fixing on roof /wall grouting/ PCC work complete all as directed by Engr-in-Charge. Note : Background colour sky blue and matter or size of stencil as direction by Enger-in-Charge.
6
-
-
S&F flex board for line diagram of water supply fixed on MS angle all as specified and directed by Engr-in-Charge.
2
-
-
S&F flex board for electric shock chart ( not less than size 1000mm x 500 mm) with fixing arrangment to wall all as specified and directed by Engr-in-Charge.
18
-
-
S&F first aid kit box made from GI with red and ivory powder coating of size 325(H)x285(W)x 80(D) mm which is rust free ,corrossion free with front transparent acrylic Glass and multi compartment for better organize of medicine with lock with fixing arrangment to wall including first aid medicine all as specified and directed by Engr-in-Charge.
6
-
-
Supply, testing and commissioning of pressure pump of capacity 1HP, single phase complete with air tank, pressure control switch, pressure guage, brass assembly etc with all necessaray connection complete all as specified and as directed by Engineer-in-charge. Make: KSB/ Kirloskar/ Crompton and equivalent as per appendix 'B'.
4
-
-
S&F fabrication and rain water shelter cubical compartmentilzed outdoor type suitable for pressure pump set, verically enclosed with PGI having one door for opening/ closing the enclosure, having workable space for connection/ disconnecting of pump motor including PCC/ cement work as required at site complete all as specified and as directed by Engineer-in-charge
Note :- 1. All critical items/ spares such as relays, power contactor, starters etc catered in the contract to be kept ready for use during the period and to be executed as directed by Engineer-in-Charge as and when required.2. Repair to pump motor will be carried immediately on noticing the defects and to be re-installed to ensure water supply to the Station as directed by Engineer-in-Charge .
6
-
-
Comprehensive maintenance of decrin dosing plants installed at various installations of GE (AF) Bamrauli of different capacity/model comprising of the following:-
330
-
-
(a) Daily checking of all plants for functional aspect of decrin dosing plants such as checking of valve, checking of gauge etc and making the plant functional for operation also by arresting any kind of leakage/blockage of plant any time any location under GE (AF) Bamrauli Area and rectifying the same within 30 mins after receiving information for making functional/ leak proof the plant by skilled mechanic and other minor parts not specifically mentioned shall also be replaced where required for proper functioning alongwith safety equipment required to detect/stop the leakage/blockage on daily basis duly signed by all operators of plants at various installations and the same shall be produced to JE E&M / AGE E/M by next day
-
-
-
(b) Daily checking of availability of chlorine at all the pump houses and at least one user end of each pump house, checking of samples of water at Command MI Room as per the direction of doctor/ nursing asst and the same be recorded on a register and signature of MO or person authorized to do so may be obtained and produced to Engr-in Charge for verification every day.
NOTE:- (i) Record on account of item No.1(a) and (b) to be produced while claiming the RAR.
(ii) Cost of gasket, nut/bolts, washers, lubricants, oil grease etc and other minor parts not specifically mentioned shall also be replaced where required for proper functioning shall deemed to be included in the quoted unit rate. No extra payment shall be made to the contractor on this account.
(iii) Quoted rate will not include for operation of plants. Operation of plant shall be carried out by the department.
(iv) Unit shall be 08 hours per day
-
-
-
S&F in replacement of gun metal gate valve 15 mm size ISI marked with iron wheel head, screwed both end for iron pipe complete all as specified and directed. Make : Leader/IVC/BIR and equivalent as per appendix 'B'.
10
-
-
Supply only Calcium based granular disinfectant for Water Treatment containing 65% to 70% chlorine in granular form and also having appropriate quantity of dispersants/ corrosion inhibitors to prevent encrustation/ scaling in distribution systems, packed in 45 Kg sealed container complete all as specified and drected by Engineer-in-charge.
40
-
-
Disconnecting, taking out and replacement of Dozing injector 230V 50Hz including on/off switch and stokes / Minute of Max 135 and Minimum 15 with motor, Discharge pressure 10Kg/cm2, High flow rate 0-30 Ltr/Hr including accessories injection check vlave, foot valve, suction and delivery vent, NRV, end caps with internal threads to secure on the injector and main pipe line, with suitable mounting brackets complete all as specified and directed.
8
-
-
Disconnecting and taking out the unserviceable 120 watts agitator motor, 960 RPM , single phase and rewinding with copper enamelled wires of suitable gauge, replacement of bearing, brackets and tolerance rings suitable for agitator including refixing complete all as directed.
6
-
-
Supply and fixing in replacement of 120 watts agitator motor, 960 RPM, single phase 230V complete all as specified and directed.
5
-
-
S&F in replacement of PVC/UPVC/Synthetic pump tube of length 19 cm and dia 1.0 cm suitable for decrin dosing pump including taking down old unserviceable pump tube complete all as directed.
10
-
-
S&F in replacement of check valve duckbill suitable for decrin dosing pump including taking down old unserviceable check valve duckbill complete all as specified and as directed.
10
-
-
S&F in replacement of 3/8" white suction/discharge bore nylon braided hard PVC pipe suitable for decrin dosing pump complete all as directed.
150
-
-
S&F in replacement of FRP preparation tank / dosing tank of 100 Ltr, FRP dosing, top dia 540mm, net height 575 mm dia, bottom 480mm, consisting of water inlet line, drain, overflow level gauge inspection port complete all as specified and directed.
14
-
-
S&F in replacement of PVC impeller 50 mm dia fixed on HDPE shaft 25 mm dia, 650 mm long shaft with suitable ferule for insertion to agitator motor shaft for preparation tank complete all as directed and directed.
15
-
-
S&F in replacement of chlorine test kit comprising of various, test tube, standard colour shades indicating the availability of residual chlorine including 100 ml orthothoduline solution all specified and directed by Engr-in-Charge.
35
-
-
S&F in replacement of Injector valve(NRV) for dosing pump protect against backflow and generate a defined back pressure complete all specified and directed by Engr-in-Charge.
16
-
-
S&F in replacement of Foot valve suction strainer for dosing pump complete all as specified and directed.
16
-
-
S&F orthothoduline solution 500 ml for checking of residual chlorine complete all as specified and directed.
16
-
-
S& F in replacement of mug plastic with handle 500ml capacity used for pouring granuel to preparation tank/ dosing tank complete all as specified and directed.
20
-
-
S& F in replacement of rubber gloves for preparation of chlorine in preparation tank/ dosing tank complete all as specified and directed.
30
-
-
S& F in replacement of flexible PVC pipe 15/20 mm inner dia for filling of water to preparation tank/ dosing tank with all necessary connection as required in pump house chlorine room complete all as specified.
100
-
-
M&L for testing of water sample (biological and chemical analysis) from MNNIT or any reputed Govt laboratory. The sample of water will be collected from different pump houses located at Air Force station, Bamrauli in suitable sterlised bottle as intimated by reputed government laboratory and the water will be tested for PH, turbidity, acidity. Akalinity, TDS, TSS, TS, Chlorides, Total Hardness, MPN, Fe, As, F complete all as specified and directed by Engineer-in-Charge. Note : Sample of water to be collected in Presence of Engineer-in-charge or JE E/M and Sample shall be forwarded to Lab duly sealed the sample bottle by Engineer-in-Charge. The Lab will be selected by Engineer-in-Charge and testing shall be done on every three month for all pump houses.
216
-
-
M&L for Testing of water sample (biological and chemical analysis from any Govt auth laboratory). The sample of water will be collected from at Central Sewage Treatment Plant at South camp& MAP Air Force Station, Bamrauli in suitable sterelised bottle as intimated by reputed government laboratoty and the water will be tested for Apperence, Odour, total dissolved solid, suspended solid, PH value, oil & grease, Ammonical nitrogen, Free Ammonia (NH3), Bio chemical oxygen demand (BOD), Chemical oxygen demand (COD) complete all as specified and directed by Engineer-in-charge(water will be collected in presence of JE E/M I/C of water supply for testing from the lab as authorized by Engineer-in-Charge. Note: Testing will be carried out on monthly basis.
33
-
-
M&L for cleaning of over head tanks of capacity 10000 Gallons to 100000 gallons comprising of the following operations :-
(a) Dewatering of the tank shall be carried out with gravitational flow.
(b) Removal of left over dirty water and sludge shall be carried out.
(c) Cleaning of overhead reservoir completely with bleaching powder and interrnal walls, floor, ceiling of tank shall be carried out by high pressure water jet. Pressure of machine shall not be less than 80-120 bar and ensure that no dirt, algae or moss remain on surface of tank. (d) Date of cleaning and capacity of tank will be written on OHT with white paint in a black painted square of suitable size in obliterating old writing of any description with paint to match existing works with letters or figures (Block, Roman or Indian) size of each letter will not be less than 5cm.
130000
-
-
M&L for two coat of synthetic enamel paint (with black/blue/red post office paint) including scraping down complete with old painted surface of pipe line of various sizes (rising main, delivery wash out and over flow pipe upto 18 mtr height from ground level) also air compressors and rubbing pipe with 10 No sand paper to make surface smooth including arrow marking and writing of direction of water complete all specified and directed
150
-
-
Taking out aerator motor pumping set from existing foundation after disconnecting of elect connection & necessary pipe line by opening nut bolts etc and dismantling the aerator motor pumping set for carrying out the repairs, reassembling the same including replacement of wornout nuts, bolts and washers including derusting, descaling, servicing, oiling, greasing ,reinstalling, testing and making good all Sewage line and electric connections to ensure proper functioning entire unit and commissioning complete all as directed by Engr-in-charge for the following capacity of pump sets :- Note :- The unit rate includes the cost of nuts, bolts, washers and all material required for overhauling , derusting, descaling etc & no extra payment will be made. Spare parts as mentioned at Sl items No 6 shall be measured and paid separately under relevant items
1
-
-
Supply only Aerator Impeller suitable for aerator motor pumping set of capacity 10 HP.
1
-
-
Supply only Base Plate suitable for aerator motor pumping set of capacity 10 HP. Note:- The cost for fixing of item Nos 2 and 4 shall be deemed to be included in the unit rate quoted against item here in before.
1
-
-
M&L for rewinding to aerator motor of capacity 10 HP of any make with supper enamelled copper winding wire of existing size and quantity including insulating materials ie varnish , sleeves etcincluding dismantling for repair and commissioning after repair complete all as directed by Engr-in-Charge.
1
-
-
Taking out non clog submesible pump set from existing shoak well after disconnecting of necessary pipe line by opening nut bolts etc and dismantling the pump of any make for carrying out the repairs, reassembling the same including replacement of wornout nuts,bolts and washers etc reinstalling,testing and making good all water line and electric connections to ensure proper functioning entire unit and commisioning complete all as directed by Engr-in-charge for the following capacity of pump sets :- Note :- spare parts shall be measured and paid separately under relevant items
-
-
-
Non clog submesible pump set 1.5 HP
1
-
-
Non clog submesible pump set 2.0 HP
1
-
-
Non clog submesible pump set 4.0 HP
2
-
-
Non clog submesible pump set 5 HP
2
-
-
Non clog submesible pump set 15 HP
2
-
-
M&L for rewinding to undermentioned non clog submesible pump set of any make with supper enamelled copper winding wire of existing size and quantity including insulating materials ie varnish , sleeves etc complete including dismantling and commissioning after rewinding all as directed by Engr-in-Charge:-
-
-
-
Non clog submesible pump set 1.5 HP
1
-
-
Non clog submesible pump set 2.0 HP
1
-
-
Non clog submesible pump set 4 HP
2
-
-
Non clog submesible pump set 5 HP
2
-
-
Non clog submesible pump set 15 HP
2
-
-
Taking out Air compressor with 3 Ph induction motor 10 HP, 1440 RPM, 50Hz. Make: Kirloskar from existing foundation after disconnecting of elect connection & necessary pipe line by opening nut bolts etc and dismantling the Air compressor for carrying out overhauling , repairs, & reassembling the same including replacement of wornout nuts, bolts and washers including derusting, descaling, servicing, oiling, greasing ,reinstalling, testing and making good all Sewage line and electric connections to ensure proper functioning entire unit and commissioning complete all as directed by Engr-in-charge for the following capacity of pump sets :- Note :- The unit rate includes the cost of nuts, bolts, washers and all material required for overhauling , derusting, descaling etc & no extra payment will be made.
1
-
-
M&L for rewinding 3 Ph induction motor Capacity 10 HP for air compressor with supper enamelled copper winding wire of existing size and quantity including insulating materials ie varnish , sleeves etc complete including dismantling and commissioning after rewinding all as directed by Engr-in-Charge:-
1
-
-
Taking out Centrifugal Pumps for capacity 3.0 to 5.0 HP from existing foundation after disconnecting of elect connection & necessary pipe line by opening nut bolts etc and M&L for overhauling and servicing of Centrifugal Pumps for capacity 3.0 to 5.0 HP, Make : Kirloskar and carry out the following tasks all as specified and directed.(i). Disassemble the pump. (ii) Inspect it. (iii) Replace worn parts. (iv) checking water seal Note: Replacement of old bearing / bush and water seal complete as per existing are are included in quoted rate.
2
-
-
M&L for rewinding Centrifugal Pumps for capacity 3.0 to 5.0 HP, . Make : Kirloskar with supper enamelled copper winding wire of existing size and quantity including insulating materials ie varnish , sleeves etc complete including dismantling and commissioning after rewinding all as directed by Engr-in-Charge:-
2
-
-
S&F in replacement of water pressure gauge at suction and discharge side of pump in 4 inch round shape (0-100) LB/IN C2 with U or S shaped steel tube of 12mm dia approx length of 300 with pressure regulator valve brass connected with union reducer to the water supply line by making hole and welding and testing complete all as specified and directed.
4
-
-
Supply only the following spare parts suitable for Centrifugal Pumps for capacity 3.0 to 5.0 HP, Make : Kirloskar as per existing model complete all as specified.
-
-
-
Ball bearing
6
-
-
Fan cover
1
-
-
Impeller
2
-
-
Saft ring
2
-
-
Gland
4
-
-
Bush
4
-
-
M & L for reapir of worn out shaft of any motor any capacity by welding or lathe maching or as required to remove the bearing endplay all as specified and directed by eng in charge
2
-
-
S & F in replacement of Rotar shaft S/S suitable for non clog submersible motor of capacity 5 HP complete all as specified and directed by Engineer-in-Charge.
Make :Kishore/ Kirloskar/ KSB/ Crompton) and equivalent as per appendix 'B'
1
-
-
S & F in replacement of Stator motor suitable for non clog submersible motor of capacity 5 HP complete all as specified and directed by Engineer-in-Charge.
Make :Kishore/ Kirloskar/ KSB/ Crompton) and equivalent as per appendix 'B'
1
-
-
S & F in replacement of Impellar for non clog submersible motor of capacity 5 HP complete all as specified and directed by Engineer-in-Charge.
Make :Kishore/ Kirloskar/ KSB/ Crompton) and equivalent as per appendix 'B'
1
-
-
S & F in replacement of Bearing set (set of 02) for non clog submersible motor of capacity 5 HP complete all as specified and directed by Engineer-in-Charge. Make :Kishore/ Kirloskar/ KSB/ Crompton) and equivalent as per appendix 'B'
1
-
-
S & F in replacement of Upper body for non clog submersible motor of capacity 5 HP complete all as specified and directed by Engineer-in-Charge.
Make :Kishore/ Kirloskar/ KSB/ Crompton) and equivalent as per appendix 'B'
1
-
-
S & F in replacement of Lower body for non clog submersible motor of capacity 5 HP complete all as specified and directed by Engineer-in-Charge.
Make :Kishore/ Kirloskar/ KSB/ Crompton) and equivalent as per appendix 'B'
1
-
-
S & F in replacement of Oil seal chamber for non clog submersible motor of capacity 5 HP complete all as specified and directed by Engineer-in-Charge.
Make :Kishore/ Kirloskar/ KSB/ Crompton) and equivalent as per appendix 'B'
1
-
-
S & F in replacement of Oil seal for non clog submersible motor of capacity 5 HP complete all as specified and directed by Engineer-in-Charge.
Make :Kishore/ Kirloskar/ KSB/ Crompton) and equivalent as per appendix 'B'
1
-
-
S & F in replacement of Pump body for non clog submersible motor of capacity 5 HP complete all as specified and directed by Engineer-in-Charge. Make :Kishore/ Kirloskar/ KSB/ Crompton) and equivalent as per appendix 'B'
1
-
-
S & F in replacement of 'O' ring set for non clog submersible motor of capacity 5 HP complete all as specified and directed by Engineer-in-Charge.
Make :Kishore/ Kirloskar/ KSB/ Crompton) and equivalent as per appendix 'B'
1
-
-
S & F in replacement of Rotar shaft S/S suitable for non clog submersible motor of capacity 2 HP complete all as specified and directed by Engineer-in-Charge.
Make :Kishore/ Kirloskar/ KSB/ Crompton) and equivalent as per appendix 'B'
1
-
-
S & F in replacement of Stator motor suitable for non clog submersible motor of capacity 2 HP complete all as specified and directed by Engineer-in-Charge.
Make :Kishore/ Kirloskar/ KSB/ Crompton) and equivalent as per appendix 'B'
1
-
-
S & F in replacement of Impellar for non clog submersible motor of capacity 2 HP complete all as specified and directed by Engineer-in-Charge.
Make :Kishore/ Kirloskar/ KSB/ Crompton) and equivalent as per appendix 'B'
1
-
-
S & F in replacement of Bearing set (set of 02) for non clog submersible motor of capacity 2 HP complete all as specified and directed by Engineer-in-Charge.
Make :Kishore/ Kirloskar/ KSB/ Crompton) and equivalent as per appendix 'B'
1
-
-
S & F in replacement of Upper body for non clog submersible motor of capacity 2 HP complete all as specified and directed by Engineer-in-Charge.
Make :Kishore/ Kirloskar/ KSB/ Crompton) and equivalent as per appendix 'B'
1
-
-
S&F in replacement of Lower body for non clog submersible motor of capacity 2 HP complete all as specified and directed by Engineer-in-Charge.
Make :Kishore/ Kirloskar/ KSB/ Crompton) and equivalent as per appendix 'B'
1
-
-
S&F in replacement of Oil seal chamber for non clog submersible motor of capacity 2 HP complete all as specified and directed by Engineer-in-Charge.
Make :Kishore/ Kirloskar/ KSB/ Crompton) and equivalent as per appendix 'B'
1
-
-
S&F in replacement of Oil seal for non clog submersible motor of capacity 2 HP complete all as specified and directed by Engineer-in-Charge.
Make :Kishore/ Kirloskar/ KSB/ Crompton) and equivalent as per appendix 'B'
1
-
-
S&F in replacement of Pump body for non clog submersible motor of capacity 2 HP complete all as specified and directed by Engineer-in-Charge.
Make :Kishore/ Kirloskar/ KSB/ Crompton) and equivalent as per appendix 'B'
1
-
-
S&F in replacement of 'O' ring set for non clog submersible motor of capacity 2 HP complete all as specified and directed by Engineer-in-Charge.
Make :Kishore/ Kirloskar/ KSB/ Crompton) and equivalent as per appendix 'B'
1
-
-
S&F in replacement of Allen scew for non clog submerbsible motor .5HP/1.5HP/ 2HP/ 4HP/ 5HP complete all as specified and directed.
10
-
-
S&F in replacement of screwed adjuster for non clog submerbsible motor .5HP/1.5HP/ 2HP/ 4HP/ 5HP complete all as specified and directed.
15
-
-
S&F in replacement of Impeller nut cover for non clog submerbsible motor .5HP/1.5HP/ 2HP/ 4HP/ 5HP complete all as specified and directed.
10
-
-
S&F in replacement of Hex bolts and nuts including washer for non clog submerbsible motor .5HP/1.5HP/ 2HP/ 4HP/ 5HP complete all as specified and directed.
15
-
-
S&F in replacement of cable cap for non clog submerbsible motor 2HP/ 4HP/ 5HP complete all as specified and directed.
6
-
-
S&F in replacement of upper seal for non clog submerbsible motor 2HP/ 4HP/ 5HP complete all as specified and directed.
6
-
-
S&F in replacement of lower seal for non clog submerbsible motor 2HP/ 4HP/ 5HP complete all as specified and directed.
6
-
-
S&F in replacement of Allen screw for non clog submerbsible motor 15HP complete all as specified and directed.
10
-
-
S&F in replacement of screwed adjuster for non clog submerbsible motor 15HP complete all as specified and directed.
8
-
-
S&F in replacement of Impeller nut cover for non clog submerbsible motor 15HP complete all as specified and directed.
10
-
-
S&F in replacement of Hex bolts and nuts including washer for non clog submerbsible motor 15HP complete all as specified and directed.
8
-
-
S&F in replacement of cable cap for non clog submerbsible motor 15HP complete all as specified and directed.
4
-
-
S&F in replacement of upper seal for non clog submerbsible motor 15HP complete all as specified and directed.
4
-
-
S&F in replacement of lower seal for non clog submerbsible motor 15HP complete all as specified and directed.
3
-
-
S&F in replacement of Mechanical seal (set of 02) for non clog submersible motor of capacity 2 HP complete all as specified and directed by Engineer-in-Charge.
Make :Kishore/ Kirloskar/ KSB/ Crompton and equivalent as per Appendix 'B'
2
-
-
S&F in replacement of Mechanical seal (set of 02) for non clog submersible motor of capacity 4 HP complete all as specified and directed by Engineer-in-Charge.
Make :Kishore/ Kirloskar/ KSB/ Crompton and equivalent as per Appendix 'B'
2
-
-
S&F in replacement of Mechanical seal (set of 02) for non clog submersible motor of capacity 5 HP complete all as specified and directed by Engineer-in-Charge.
Make :Kishore/ Kirloskar/ KSB/ Crompton and equivalent as per Appendix 'B'
2
-
-
S&F in replacement of Mechanical seal (set of 02) for non clog submersible motor of capacity 15 HP complete all as specified and directed by Engineer-in-Charge.
Make :Kishore/ Kirloskar/ KSB/ Crompton and equivalent as per Appendix 'B'
1
-
-
M&L Gear oil suitable for aerator motor/pumping set complete all as specified and directed by Engineer-in-Charge.
Make Veedol/Power gear/MAK and equivalent as per Appendix 'B'
20
-
-
M&L in replacement of compressor oil suitable for aerator motor/ pumping set complete all as specified and directed by Engineer-in-Charge.
Make Veedol/Power gear/MAK and equivalent as per Appendix 'B'
20
-
-
Labour for taking out sludge from sand filter bed and transportation to depositing the existing plateform , cleaning of sand filter complete in side and out side removing of unwanted vegetation in sand filter complete as directed by Engineer in charge.
150
-
-
Labour for taking out sludge from existing plateform and transportation to depositing where directed by Engr-in-Charge, cleaning of Plateform complete, removing of unwanted vegetation in plateform complete as directed by Engineer in charge.
60
-
-
Material and labour for clean dry sand (as specified for filter bed) laid in filter bed for bedding, complete all as specified directed by Engineer in charge.
55
-
-
Removing sedimented sludge by excavating not exceeding 75 cm deep (average) and getting out from sludge sumps, aeration tank (containing two tanks each of size 30 Mtrs x15 Mtrsx3 Mtr deep) , Clarifier,MBBR Tank,Tube setler tank and treated water tank for removing out side of MOD and deposited where directed at a place allotted by local muncial/ corporation including spreading of sufficient bleachig powder over the sluge to take all precuative health hazzored complete all as specified and directed.
100
-
-
All as per item No 191 above but sump well 8 Nos sump well each of dia not less than 3 Mtr and average depth of excavation n.exc 90 cm complete all as specified and directed.
100
-
-
Material and labour for opening choked line of sump well upto a depth of 10 mtr from ground level with necessary tool and plant to make through the sludge from one system to another complete all as specified and directed. Note: 1. The T&P will be given by the contractor. 2. The contractor should be fully responsible for safety of the labourer engaged during the said work.
10
-
-
Supply, fixing, jointing and testing in repair of cast iron sluice valve of size 100 mm dia, class I (ISI MARKED) PN-1 type latest IS 14846-2000 flanged ends, drilled having stainless steel spindle with cast iron wheel head at top complete with nuts, bolts, washer and rubber gasket etc complete including taking down unserviceable sluice valve complete all as specified and directed.
1
-
-
Supply and laying in replacement of Nylone rope of 24mm thick, complete all as specifeid and directed.
20
-
-
Cleaning the area as directed by cutting grasses, bushes etc and making neat and clean the area all as directed.
200
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%