Military Engineer Services Tender

All as per item no 3 here in before but except material. Note: Material retrieved from item no 02 above shall be reused.

M&L for preparing unsurfaced WBM surface by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces by air compressor to remove all loose dirt etc and applying evenly a priming coat with paving bitumen grade Vg-10 @10 Kg per 10 Sqm and laying bituminous premix Semi Dense Asphaltic Concrete (Gde-II), 30 mm consolidated thickness with minimum 5.5% binder content (bitumen grade VG-30) by weight of total mix in hot mix plant, laid with mechanical paver and rolled to a uniform smooth surface with 12 tonnes articulated tandem roller (Double drum vibratory roller) and compacted to required camber and gradient complete all as specified and directed. Note: (i) The mix shall be mixed in hot mix plant and laid with mechanical paver only. (ii) The mix shall be prepared by designing through job mix formula all as specified from Govt. engg college / Govt approved lab/HBTI. (iii) No price adjustment for Bitumen shall be done for variation on plus side. (iv) Semi Dense Asphaltic Concrete will be comprising of 2% filler material (OPC 43 grade cement). (v) Cost of testing chrages, material & transportation for job mix formula shall be deemed included in the rate quoted.

M&L premix bituminous macadam ("Grade II" as specified in MORTH specification Para 504), laid/rolled and compacted to required gradient and camber (consolidated thickness 50-75mm) using paving bitumen VG-30 grade as binder minimum 4% by weight to total mix, mixed in hot mix plant and laid by mechanical paver and rolled to a uniform smooth surface and rolled and compacted to required gradient and camber with 8-12 tonnes articulated tandem roller (Double drum vibratory roller) complete all as specified and directed.

M&L for preparing of existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces by air compressor to remove all loose dust/dirt etc and applying evenly a priming/tack coat of paving bitumen grade Vg-10 @ 5 Kg per 10 Sqm and laying bituminous premix Semi Dense Asphaltic Concrete (Gde-II), 30 mm consolidated thickness with minimum 5.5% binder content (bitumen grade VG-30) by weight of total mix in hot mix plant, laid with mechanical paver and rolled to a uniform smooth surface with 12 tonnes articulated tandem roller (Double drum vibratory roller) and compacted to required camber and gradient complete all as specified and directed. Note: (i) The mix shall be mixed in hot mix plant and laid with mechanical paver only. (ii) The mix shall be prepared by designing through job mix formula all as specified from Govt. engg college / Govt approved lab/HBTI. (iii) No price adjustment for Bitumen shall be done for variation on plus side. (iv) Semi Dense Asphaltic Concrete will be comprising of 2% filler material (OPC 43 grade cement). (v) Cost of testing chrages, material & transportation for job mix formula shall be deemed included in the rate quoted.

M & L cleaning bituminous/concrete road surface free from all dirt, dust and other foreign material etc. and applying 2mm thick hot thermoplastic retro reflective road marking paint of white/yellow colour as in strips/lines on road surfaces upto 150 mm width and including glass beads @ 0.45 kg/sqm. The hot application shall be carried out mechanically and the finished surface to be levelled uniform and free from staks and holes complete all as specified in MORTH clause 803.4 and as directed. Make : Apcomarks brand of Asian paint or equivalent in Berger/Shalimar/Jenson & Nicholson as approved.

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15 cm thickness (below or above ground level) and removing the debris out side MoD land complete all as specified and directed.

M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base and floor complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and no pigment over and including 50 mm thick sand cushioning complete all as specified and directed.

M&L Preparation of new surface or previously untreated concrete surface as in kerb and applying two coat of synthetic enamel paint over a coat of primer applied on concrete surface description over 10cm girth or width, not otherwise described complete all as specified and directed.

S&F in repair for metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed Make: DARKEYE/3M or equivalent in other make as as given in Appendix 'B' to Particular Specifications )

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.Make: DARKEYE/3M or equivalent in other make as as given in Appendix 'B' to Particular Specifications )

S&F in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed make (DARKEYE/3M or equivalent in other make as as given in Appendix 'B' to Particular Specifications )