Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Paints and Enamels
Eprocure
Opening Date29 Jun 2023
Closing Date24 Jun 2023
Tender Amount₹ 45,00,000
Costs
EMD
₹ 90,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_MES_599401_1Bid Award Id
ViewTender No
8123/C/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Tender documents for REPAIR AND PAINTING TO VARIOUS STEEL FURNITURE UNDER GE (WEST) BAREILLY.
NIT for REPAIR AND PAINTING TO VARIOUS STEEL FURNITURE UNDER GE (WEST) BAREILLY.
BOQ for REPAIR AND PAINTING TO VARIOUS STEEL FURNITURE UNDER GE (WEST) BAREILLY.
BOQ Items
... More
Handle of Almirah large/Med steel with chromium plated 150 mm long Godrej pattern best quality as approved.
1230
-
-
... More
Bush (handle seat) of Almirah large/Med steel with best quality bush made of brass as per sample approved.
1230
-
-
... More
MS hinges 75 mm long heavy duty including necessary painting as per sample approved.
2500
-
-
... More
Corner cleats for supporting shelves made out of 3 mm thick MS black sheet, bent to the shape as per sample and to be fixed with suitable machine screws under shelves.
2250
-
-
... More
Base legs of Almirah large/med steel made out of MS black sheet 1 mm thick made to the rectangular shape of size 100mm heightX70mm wideX440 to 485mm long as reqd for almirah duly welded with Electric arc welding to the Almirah including necessary painting to match the existing surfaces all as directed.
1260
-
-
... More
Removing the u/s hanging road and S& F new hanging rod of 20mm dia chromium plated steel conduite pipe with side stoppers as per as specified and direrected.
55
-
-
... More
Removing the u/s locker handle and S&F new locker handle of Godrej pattern as per existing shape and size.
42
-
-
... More
Removing the u/s drawer handle and S&F new drawer handle of as per existing shape and size.
40
-
-
... More
Electric arc welding to the broken joints upto 1 cm long of Almirah large/medium steel as required including necessary painting to match the existing surfaces all as directed.
11500
-
-
... More
Shelves of Almirah large steel/ MAP , made out of MS black sheet 1 mm thick of size 450X920mm, duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.
560
-
-
... More
All as per item No. 2.11 but shelves of Almirah medium steel of size 405mmx765mm.
1190
-
-
... More
Three way locking device made with 10mm mild steel round bar fixed with shutter of Almirah Large Steel complete with all accessories including lock,MS cover & handle size and shape as required as per drawing, duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.
170
-
-
... More
All as item per No. 2.13 but locking device for Almirah med steel.
485
-
-
... More
Repair to door of Almirah large steel/ MAP as specified including all necessary welding .
245
-
-
... More
All as per item No. 2.15 but for Almirah med/small steel
1135
-
-
... More
Cover made of 1mm thick MS sheet bent to the shape & size as per drawing suitable for Almirah large/Almirah Medium with shelves for locking device duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.
950
-
-
... More
Cleaning the all steel surfaces of Almirah large steel / MAP by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel paint of existing shade over a coat of red oxide primer to internal surfaces including shelves and external surfaces up to a glossy finish complete.
400
-
-
... More
All as per item No. 2.18 but Almirah med steel..
1250
-
-
... More
Removing of dents and bends of Almirah Large steel/ MAP wherever required including welding where required. Rest all as per directed by Engr-in-charge.
400
-
-
... More
All as per item No. 2.20 but Almirah med steel..
1250
-
-
... More
BOOK CASE STEEL (FD-1028)
-
-
-
... More
Removing the u/s glass and S& F new glass as per drawing.
20
-
-
... More
Removing the u/s handle and S&F new handle of Godrej pattern as per existing shape and size. Rest all as specified and directed by Engr-in-charge.
25
-
-
... More
Removing the u/s stopper and S&F new iron cleat stopper as per drg.
20
-
-
... More
Removing of u/s MS lock and S&F complete new locking system (including lock frint) seat of 6 lever brass, Godrej pattern with duplicate keys fixed with suitable screws & nuts as per drawing, best quality as approved. Make:Harrison, Link, Godrej.
30
-
-
... More
Cleaning the all steel surfaces by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel paint as per existing 1st grade over a coat of red oxide primer to internal surfaces including shelves and external surfaces up to a glossy finish complete.
10
-
-
... More
Removing of dents and bends wherever required including welding.
10
-
-
... More
Removing the u/s channel and S&F new channel with 1mm thick sheet for glass doors as per drawing. Rest all as specified and directed by Engr-in-charge.
16
-
-
... More
Shelves of book case steel, made out of MS black sheet 1 mm thick of required size as per drawing, duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.
10
-
-
... More
MODERATE CHAIR (MODEL NO: EEZY-355) : DRAWING NO. -TP
-
-
-
... More
Replacement of arm rest of moderatenchair made of polyurethen,black integrated scratch & weather proof skin with MS insert as per sample complete.
38
-
-
... More
Replacement of old/unservicable Seat & Back both complete made with 12 mm thick hot pressed plywood covered with 50mm thick & 50-55 density Polyurethene foam cushion,upholestered with best quality fabric as approved & PVC lipping allround the seat & back.Shape & size as per specified & shown in drawings & directed.
25
-
-
... More
S&F new superior quality cover cloth covering seat and back as shown on drg and directed by Engr-in-Charge.
20
-
-
... More
Taking down u/s MS flat iron stiffener and S&F new MS flat iron stiffener of existing shape & size as per drawing complete all as specified and directed.
30
-
-
... More
Welding and removing dents, bends wherever required and cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coat of synthetic enamel paint 1st grade of required shade as approved by the spray painting to all steel surfaces up to a glossy finished shade over a coat of red oxide primer as directed.
45
-
-
... More
TRESTLE SR IRON (DRAWING NO FD-FD-86 (M)/1043)
-
-
-
... More
Removing old unserviceable long rail of trestle store room and supply and fixing new long rail of required size at top complete all as specified and directed and shown on drawings.
50
-
-
... More
All as per item No. 5.01 but short rail.
70
-
-
... More
All as per item No. 5.01 but stiffener.
120
-
-
... More
Cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coats of synthetic enamel paint olive green to all exposed steel surfaces by spray painting up to a glossy finished shade complete.
250
-
-
... More
Electric arc welding upto 1 cm long to the joints of trestle sr iron as required and as directed.
1800
-
-
... More
Table Invalid steel FD-131(M)/ HFD-2006
-
-
-
... More
Replacement of unserviceable table top and S&F new SS top of required shape & size as per drawing complete , confirming to IS specification and fixing & finishing shall be done in accordance with standard workmanship and drawing complete all as specified and directed.
32
-
-
... More
Replacement Twin wheel Castor as per existing shape & size and as per drawing.
120
-
-
... More
Legs with mild steel 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.
50
-
-
... More
Stiffener with mild steel 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint over a coat of red oxide primer complete.
34
-
-
... More
Electric Arc welding upto 1 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.
264
-
-
... More
Removing dents and bends wherever required including welding. Rest all as per directed by Engr-in-charge.
45
-
-
... More
Cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coat of synthetic enamel paint olive green paint 1st grade over a coat of red oxide primer as approved by spray painting to all steel surfaces up to a glossy finished shade as directed.
45
-
-
... More
TABLE DINING OR'S (DRAWAING NO : FD-165)
-
-
-
... More
Table legs with 25 mm MS square tubes 760mm long, 1.6 mm thick , duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer to match with the existing colour complete.
22
-
-
... More
Top frame long rail/long stiffner with 25 mm MS square tube 1.6 mm thick & 1600mm long, duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer to match with the existing colour complete.
13
-
-
... More
Top frame short rail/short stiffner with 25 mm MS square tube 1. 6 mm thick & 515mm long, duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer to match with the existing surface over a coat of red oxide primer complete.
15
-
-
... More
Table top with 18 mm thick MDF Pre-laminated board conforming to IS specifications as approved of size 1900 x 685 mm duly covered with 22 gauge thick aluminium sheet as required for top complete.
30
-
-
... More
Replacement of rubber shoes with best quality hard rubber shoes as approved.
120
-
-
... More
Electric arc welding upto 1 cm long to the MS pipe joints of table dinning ORs as required and as directed.
120
-
-
... More
Cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coats of synthetic enamel paint olive green to all exposed steel surfaces by spray painting up to a glossy finished shade complete.
30
-
-
... More
Removing dents and bends wherever required including welding.
30
-
-
... More
TABLE BED SIDE STEEL TYPE I & II (HFD-2005)
-
-
-
... More
Replacement of wheel/ Castor 50mm dia with locking facility and rear end buffers of table bed side steel type I as per drawing complete.
115
-
-
... More
Replacement of stainless/Mild steel door 20 GA of table bed side steel type I as per drawing complete.
36
-
-
... More
All as per item No. 8.02 but door having ventilation louvers of table bed side type II.
78
-
-
... More
Replacement of Cam lock (Brass) of table bed side steel type I as per drawing complete.
50
-
-
... More
All as per item No. 8.02 but drawer of table bed side type I.
26
-
-
... More
Taking down u/s plywood and S&F new ISI marked plywood of 406x406x12mm thick of table bed side type I as per drawing complete.
42
-
-
... More
Taking down u/s SS top and S&F new suprerimposed stainless steel top of 24 GA of size 410x410mm with 2 cm raised edges on three sides of table bed side type I as per drawing complete.
25
-
-
... More
All as per item No. 8.07 but SS top of size 400x400mm of table bed side type II.
83
-
-
... More
Taking down u/s Aluminium strips and S&F new ISI marked Aluminium strips of required shape and size of table bed side type I as per drawing complete.
31
-
-
... More
Taking down u/s buffers and S&F new ISI marked High Density Polumer buffers of required shape and size of table bed side steel type I as per drawing complete.
32
-
-
... More
Replacement of rubber shoes of table bed side steel type II as per drawing complete.
520
-
-
... More
Taking down u/s kob and S&F new Brass knob with blank of table bed side type II as per drawing complete.
74
-
-
... More
Taking down u/s MS tubular leg and S&F new MS tubular leg of 18 SWG of required shape and size of table bed side type II as per drawing complete.
110
-
-
... More
Electric arc welding to the broken joints upto 1 cm long of table bed side steel as required including necessary painting to match the existing surfaces all as directed.
2200
-
-
... More
Cleaning the all steel surfaces by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel paint Olive Green 1st grade over a coat of red oxide primer to internal surfaces including shelves and external surfaces up to a glossy finish complete.
230
-
-
... More
Removing of dents and bends of Table Bed Side Steel as per specified and directed by Engr - in- charge.
230
-
-
... More
TABLE OFFICE CLERK STEEL : DRAWING NO FD-84 / FD-1004
-
-
-
... More
Top of size 1200mmx600mm made of 18mm thick MDF board exterior grade ( Grade I, Type-II ) ISI marked duly post- formed with 0.6 mm thick laminate in colour / shade as approved by Engr-in-Charge / GE with 2mm thick PVC edging fixed on two sides with strong bonded chemical adhasive through hot pressed machine complete rest all as per drg.
50
-
-
... More
Table drawer with drawers made out of 1 mm thick mild steel black sheet size and shape required and shown on drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.
35
-
-
... More
Drawer lock of mild steel 50 mm, 6 lever (brass lever) of best quality with duplicate keys as approved.
40
-
-
... More
Legs with 25 mm mild steel square tubes 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.
33
-
-
... More
Stiffener with 25 mm size mild steel square tube 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint over a coat of red oxide primer complete.
27
-
-
... More
Hard rubber shoes of best quality as approved.
200
-
-
... More
All as per item No. 9.02 but shutter complete (including lock) of table office clerk steel.
25
-
-
... More
Hard plastic handle of drawer of best quality.
40
-
-
... More
Electric Arc welding upto 1 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.
520
-
-
... More
Removing dents and bends wherever required including welding. Rest all as per directed by Engr-in-charge.
50
-
-
... More
Cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coat of synthetic enamel paint olive green paint 1st grade over a coat of red oxide primer as approved by spray painting to all steel surfaces up to a glossy finished shade as directed.
50
-
-
... More
TABLE OFFICE OFFICER STEEL : DRAWING NO : FD-84 / FD-1003
-
-
-
... More
Top of size 1680mmx870mm made of 18mm thick MDF board exterior grade ( Grade I, Type-II ) ISI marked duly post- formed with 0.6 mm thick laminate in colour / shade as approved by Engr-in-Charge / GE with 2mm thick PVC edging fixed on two sides with strong bonded chemical adhasive through hot pressed machine complete rest all as per drg.
42
-
-
... More
Table drawer with drawers made out of 1 mm thick mild steel black sheet size and shape required and shown on drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.
30
-
-
... More
Drawer lock of mild steel 50 mm, 6 lever (brass lever) of best quality with duplicate keys as approved.
31
-
-
... More
Legs with 25 mm mild steel square tubes 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.
27
-
-
... More
Stiffener with 25 mm size mild steel square tube 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.
21
-
-
... More
Hard rubber shoes of best quality as approved.
168
-
-
... More
All as per item No. 10.02 but shutter complete (including lock) of table office clerk steel.
17
-
-
... More
Electric Arc welding upto 1 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.
398
-
-
... More
Removing dents and bends wherever required including welding. Rest all as per directed by Engr-in-charge.
42
-
-
... More
Cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coats of synthetic enamel paint olive green paint 1st grade over a coat of red oxide primer as approved by spray painting to all steel surfaces up to a glossy finished shade as directed.
42
-
-
... More
TABLE 1520mmX860/750mm / TABLE 1500mmx600mm /TABLE 900mmx600mm WITH AND WITHOUT DRAWER / TABLE 900mmX900mm / TABLE 600mmx600mm :DRAWING NO : FD-1007 /FD-1008/ fd-1009/FD-1015 OR SIMILAR PATTERN
-
-
-
... More
Top of size 1520mmx860mm made of 18mm thick MDF board exterior grade ( Grade I, Type-II ) ISI marked duly post- formed with 0.6 mm thick laminate in colour / shade as approved by Engr-in-Charge / GE with 2mm thick PVC edging fixed on two sides with strong bonded chemical adhasive through hot pressed machine complete rest all as per drg.
9
-
-
... More
All as per item No. 11.01 but top of size 1500mmx600mm.
14
-
-
... More
All as per item No. 11.01 but top of size 900mmx600mm.
480
-
-
... More
All as per item No. 11.01 but top of size 900mmx900mm.
8
-
-
... More
All as per item No. 11.01 but top of size 600mmx600mm.
7
-
-
... More
Replacement of u/s/ broken marble/ Granite top and S&F new marble top of size 900x600x18/20mm thick as per drg all as specified and directed.
20
-
-
... More
Table drawer with drawers made out of 1 mm thick mild steel black sheet (including lock) size and shape required and shown on drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.
80
-
-
... More
Drawer lock of mild steel 50 mm, 6 lever (brass lever) of best quality with duplicate keys as approved.
84
-
-
... More
Legs with 25 mm mild steel square tubes 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.
193
-
-
... More
Hard plastic handle of drawer of best quality.
124
-
-
... More
Hard rubber shoes of best quality as approved
2000
-
-
... More
Electric Arc welding upto 1 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel olive green paint 1st grade over a coat of primer complete.
3000
-
-
... More
Cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coats of synthetic enamel paint olive green paint 1st grade over a coat of red oxide primer as approved by spray painting to all steel surfaces up to a glossy finished shade as directed.
500
-
-
... More
Removing dents and bends wherever required and welding. Rest all as per specified and directed by Engr-in-charge.
500
-
-
... More
TABLE CENTRE BRASS DRAGWING No : FD-375
-
-
-
... More
Replacement of u/s broken glass top and S&F new glass top of size 1200x900x12mm as per drg all as specified and directed.
40
-
-
... More
Replacement of u/s vaccum rubber shoes and S&F new vaccum rubber shoes as approved quality.
160
-
-
... More
Replacement of u/s PVC rubber shoes and S&F new PVC rubber shoes as approved quality.
160
-
-
... More
Removing dents and bends wherever required and cleaning all brass surfaces thoroughly by using abrasive emery of various sizes and putty as required and applying two coats of brasso polish as per drawing.
40
-
-
... More
CHAIR WRITING (STEEL)/ CHAIR CB/ CBA STEEL : DRAWING NO FD-E6/MAP/12, HFD-2040, HFD-2044, HFD-2041, HFD-2045
-
-
-
... More
Replacement of arm rest of chair writing made of polyurethen,black integrated scratch & weather proof skin with MS insert as per sample complete.
180
-
-
... More
All as per item No. 13.01 but arm rest of chair CBA steel.
225
-
-
... More
S&F new superior quality cover cloth covering seat and back with PVC Lipping all around complete of various Chairs with best quality Fabric as approved by GE. Rest all as shown on drg and directed by Engr-in-Charge (Range of fabric not less than Rs 300 per RM).
190
-
-
... More
Replacemrnt of old/unservicable Seat & Back both complete of various Chairs made with 12 mm thick hot pressed plywood covered with 50mm thick & 50-55 density Polyurethene foam cushion,upholestered with best quality fabric as approved & PVC lipping allround the seat & back.Shape & size as per specified & shown in drawings & directed.
360
-
-
... More
Taking down u/s MS flat iron stiffener and S&F new MS flat iron stiffener of existing shape & size as per drawing complete all as specified and directed.
286
-
-
... More
Tightening of compete frame with suitable machine screws as per existing size (including handle) , Welding ,removing dents & bends wherever required and cleaning all steel surfaces of various chairs thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coat of synthetic enamel paint 1st grade of required shade as approved by the spray painting to all steel surfaces up to a glossy finished shade over a coat of red oxide primer as directed.
550
-
-
... More
CHAIR EXECUTIVE (REVOLVING) (EEZY- 235/318) : DRAWING NO : TP
-
-
-
... More
Replacement of arm rest made of polyurethen,black integrated skin with MS insert as per existing shape& size .
43
-
-
... More
Replacement of twin wheel Castor 50mm dia as per sample
30
-
-
... More
Replacement of Peddestrial assembly containing twin wheel castor made of PVC injection moulded in black as per sample.
26
-
-
... More
S&F new superior quality cover cloth covering seat and back with PVC Lipping all around complete of various Chairs with best quality Fabric as approved by GE. Rest all as shown on drg and directed by Engr-in-Charge (Range of fabric not less than Rs 300 per RM).
15
-
-
... More
Replacemrnt of old/unservicable Seat & Back both of complete Chair made with 12 mm thick hot pressed plywood covered with 50mm thick & 50-55 density Polyurethene foam cushion,upholestered with best quality fabric as approved & PVC lipping allround the seat & back.Shape & size as per sample & directed.
25
-
-
... More
Replacement u/s hydraulic assembly and S&F new hydraulic assembly complete (except peddestrial assembly) as per existing shape and size.
30
-
-
... More
Tightening of compete frame with suitable machine screws as per existing size (including handle) , Welding ,removing dents & bends wherever required and cleaning all steel surfaces of various chairs thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coat of synthetic enamel paint 1st grade of required shade as approved by the spray painting to all steel surfaces up to a glossy finished shade over a coat of red oxide primer as directed.
40
-
-
... More
CHAIR COMPUTER : DRAWING NO : E6/MAP/01, TP, HFD
-
-
-
... More
Removing unserviceable back rest and S&F new adjustable back rest on 12mm thick Hot presed ply wood , upholstered with fabric and contoure lumber support for extra comfort with PVC lipping all around. Adjustable back rest shall consist of prolift mechanism and can be locked in 5 steps for better lumber support .
90
-
-
... More
Replacement of u/s parts of synchro tilting set up.
102
-
-
... More
Removing u/s seat and S&F new seat as per existing shape and size.
95
-
-
... More
Replacement of upholstery of seat & back with Fabric best quality as approved (Rate of fabric not less than Rs 300 per RM).
110
-
-
... More
Removing u/s handle and S&F new handle having black integral skin, polyurethane reinforced with MS insert. It shall be scratch and weather rasistance.
142
-
-
... More
Replacement u/s hydraulic assembly and S&F new hydraulic assembly as per existing shape and size.
117
-
-
... More
Replacement of twin wheel Castor as per existing shape and size.
84
-
-
... More
Revoming u/s padestal assay with wheels and S&F new padestal assay with wheels, having 600mm pitch centre dia and a 10.05mm dia forged bright zinc plated MS castors pin is of press fitted into each prong for holding the castors as per specified and directed.
150
-
-
... More
Tightening of compete frame with suitable machine screws as per existing size (including handle) , Welding ,removing dents & bends wherever required and cleaning all steel surfaces of various chairs thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coat of synthetic enamel paint 1st grade of required shade as approved by the spray painting to all steel surfaces up to a glossy finished shade over a coat of red oxide primer as directed.
205
-
-
... More
LEATHER CUSHION CHAIR WITH FULL DESKLED & PAPER TRAY , MAKE : GODREJ: FD- (TP)
-
-
-
... More
Removing u/s seat & back and S&F new leather cushion seat & back complete and fix it properly with the help of screws (04 Nos) through the side conduite rail as per existing shape and size.
105
-
-
... More
Replacement of upholstery of seat & back with Fabric best quality as approved by GE(Rate of fabric not less than Rs 300 per RM). Fix it properly with the help of screws (04 Nos) through the side conduite rail as per existing shape and size.
65
-
-
... More
Removing u/s handle and S&F new handle having black integral skin, polyurethane reinforced with suitable m/c screw as per drawing. It shall be scratch and weather rasistance.
108
-
-
... More
Taking down of old u/s hand board and S&F new hand board made of 18 mm thick both side prelaminated teak faced MDF board of existing shape & size with PVC edging all around the top & fixed with suitable screws complete.
135
-
-
... More
Taking down u/s MS half round support and S&F New MS Half roud support with duly two coats of synthetic enamel paint 1st grade over a coat of red oxide primer to fix the hand board complete all as per specified and directed.
75
-
-
... More
Removing u/s paper tray and S&F new paper tray as per existing shape and size.
83
-
-
... More
Removing us/ hard rubber shoes and S&F new hard rubber shoes as per existing shape and size.
680
-
-
... More
Cleaning all steel surfaces of Leather cushion chair thoroughly by using abrasive cloth emery various sizes and putty as required as per trade practice and applying two coats of existing paint (1st grade paint) (Godrej pattern) over a coat of red oxide primer by means spray/ brush to a glossy finished shade all as per specified and directed.
170
-
-
... More
Welding and removing the dents,bends wherever required. Rest all as per specified and directed by Engr-in-charge.
170
-
-
... More
MUTIPURPOSE LEATHERITE CUSHIONED CHAIR WITH & WITHOUT ARM REST MAKE GODREJ: FD- (TP)
-
-
-
... More
Removing u/s cushioned seat & back and S&F new cushioned seat & back complete and fix it properly with the help of screws (04 Nos) through the side conduite rail as per existing shape and size of multipurpose cushioned chair with arm as per existing shape & size and drawing.
70
-
-
... More
All as per item No. 17.01 but leather cushioned seat & back of Leatherite cushioned chair without arm.
70
-
-
... More
Removing u/s upholstery of seat & back and S&F new upholstery of seat & back complete of multipurpose cushioned chair with arm as approved as per existing shape & size and drawing (Rate of fabric not less than Rs 250 per RM) . Fix it properly with the help of screws (04 Nos) through the side conduite rail .
35
-
-
... More
All as per item No. 17.03 but leatherite cushioned chair without arm (Rate of fabric not less than Rs 300 per RM).
25
-
-
... More
Taking down u/s arm rest and S&F new arm rest made of MS conduite pipe ( 20 Gauge) (double pipe) , painted two coat of sunthetic enamel black paint over a coat of red oxide primer and tightening properly with the help of s/s screws and hard plastic cap as per existing shape & size and drawing.
72
-
-
... More
Cleaning all steel surfaces of multipurpose cushioned chairs thoroughly by using abrasive cloth emery various sizes and putty as required as per trade practice and applying two coats of existing paint (1st grade paint) (Godrej pattern) over a coat of red oxide primer by means brush to a glossy finished shade all as specified and directed.
200
-
-
... More
Welding and removing the dents,bends wherever required . Rest all as specified and directed by Engr-in-charge.
200
-
-
... More
CLASS ROOM CHAIR WITH WRITING BOARD : TP
-
-
-
... More
Replacement of old u/s hand board and S&F new hand board made of 18 mm thick both side prelaminated teak faced MDF board of required shape and size, with PVC edging all round the top as per drawing and fixed with suitable screws complete all as specified and directed and shown on drg.
40
-
-
... More
Replacement of unserviceable & deficient MS rod and S&F new MS rod of required shape and size, duly two coats of synthetic enamel paint 1st grade over a coat of red oxide primer to fix the hand board complete all as specified and directed and shown on drg.
30
-
-
... More
Replacement of u/s handle and S&F new handle as per existing shape and size.
32
-
-
... More
Removing dents, bends and welding wherever required then cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and apply putty as required and applying two coats of existing paint over a coat of red oxide primer of required shade as approved by the spray painting to all steel surfaces up to a glossy finished shade as directed.
40
-
-
... More
TEAPOY VERANDAH : DRAWING NO : FD-255/ FD-359/ FD/E6/MAP 17
-
-
-
... More
Top size as per drawing made of 18mm thick MDF board exterior grade ( Grade I, Type-II ) ISI marked duly post- formed with 0.6 mm thick laminate in colour / shade as approved by Engr-in-Charge / GE with 2mm thick PVC edging fixed on two sides with strong bonded chemical adhasive through hot pressed machine complete rest all as per drg.
240
-
-
... More
Replacement u/s MS bar base tray and S&F new bar base tray of 5mm dia (12x10 Nos at equidistant) as per drg and specified.
70
-
-
... More
Electric Arc welding upto 1 cm long to steel joints/surfaces of any description all as required and as directed.
310
-
-
... More
Cleaning the old and new steel surface of teapoy verandah thoroughly by using abrasive cloth emery as required and applying two coats of white/black synthetic enamel paint 1st grade to all metal/steel surface and providing 4 Nos hard rubber shoes of each as approved by GE.
240
-
-
... More
LOCKER BED SIDE STEEL and CUPBOARD : DRAWING NO FD-257 / FD-1029.
-
-
-
... More
Replacement of unserviceable/deficient "D" type chromium plated steel handle complete all as specified and directed.
840
-
-
... More
Replacement of unserviceable 75mm long chromium plated steel hasp and staple complete all as specified and directed.
800
-
-
... More
Replacement of unserviceable hanging rod made of MS chromium plated pipe made of 19mm dia 1.6 mm thick and 380mm long with socket complete all as specified and directed.
485
-
-
... More
Electric arc welding to the broken joints upto 1 cm long of the Locker steel as required including painting to match the existing surface as directed.
3000
-
-
... More
Base leg of Locker steel made out of MS black sheet 1 mm thick made to the rectangular shape of size 100mm heightX50mm wideX 550mm long as reqd for Locker duly welded with Electric arc welding to the Locker including necessary painting to match the existing surface complete.
635
-
-
... More
All as per item No. 20.05 but leg of cupboard steel.
30
-
-
... More
Shelves of locker bed side steel/ cupboard, made out of MS black sheet 1 mm thick of required shape & size as per drawing, duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.
695
-
-
... More
Repair to door/ sides as specified and directed by Engr-in-Charge .
635
-
-
... More
New shutter/ door as per drg.
294
-
-
... More
Cleaning the all steel surfaces by using various types abrasive cloth emery, filling with putty and two coat of spray painting with synthetic enamel paint Olive Green 1st grade over a coat of red oxide primer to internal surfaces including shelves and external surfaces up to a glossy finish complete.
710
-
-
... More
Removing of dents and bends wherever required including welding where required as per specified and directed by Engr-in-charge.
710
-
-
... More
FORM WITHOUT BACK : DRAWING NO FD-77 (M) /FD -1027
-
-
-
... More
Replacement of unserviceable top plank with 1st class hard wood, sheesham wood plank 25mm thick of size 1525x255mm free from all timber defects duly well finished as per drawing.
100
-
-
... More
Electric arc welding to the broken joints upto 1 cm long of the form as required including painting to match the existing surface as directed.
1170
-
-
... More
Cleaning the wooden/steel surfaces thoroughly by using abrassive cloth and applying putty as required as per trade practice and apply good quality of polishing to the wooden top & painting with synthetic enamaled Olive Green in a glossy finish shade on steel surfaces as per specified and directed.
120
-
-
... More
STOOL STEEL (WITH BACK REST) TYPE II 300X300X510MM : DRAWING No : HFD - 2007
-
-
-
... More
Removing of u/s cushioned seat & back and S&F new cushioned seat & back complete of required shape & size as per drawing and fix with accurate machine screw as per drawing.
300
-
-
... More
Replacement of upholstery of seat & back with Fabric best quality as approved by GE (Rate of fabric not less than Rs 300 per RM).
50
-
-
... More
Removing u/s rear leg and S&F new MS tubular ( 22ø ) legs of CRCA quality & 18 SWG with best quality rubber shoes, of required size as per drawings including two coats of synthetic enamel black paint 1st grade over a coat of red oxide primer complete all as per specified and directed.
200
-
-
... More
All as per item No. 22.03 but front leg of of stool steel.
210
-
-
... More
Removing of u/s / broken MS ring and S&F new MS ring CRCA quality of 22mm dia ring as per drg.
186
-
-
... More
Taking down u/s MS stiffener and S&F new MS stiffners of size350mmx25mmx5mm as per drg.
600
-
-
... More
Electric arc welding to the broken joints upto 1 cm long of stool steel with back rest type II as required including necessary painting to match the existing surfaces all as directed.
3200
-
-
... More
Removing u/s hard rubber shoes and S&F new hard rubber shoes as per drg
1400
-
-
... More
Cleaning the all steel surfaces by using various types abrasive cloth emery, filling with putty and welding where required than two coat of spray painting with synthetic enamel black 1st grade over a coat of red oxide primer up to a glossy finish complete.
350
-
-
... More
SHOE RACK STEEL:(DRAWING No: E6/MAP/02®
-
-
-
... More
Removing unserviceable side frame and S&F new side frame of 25mm dia MS pipe (18 gauge) as per existing shape and size.
138
-
-
... More
Removing unserviceable main frame work and S&F new main frame work of 19mm dia MS pipe (18 gauge), horizontal MS rod of 3mm dia (3 Nos equidistant) and verticle MS rod of 3mm dia (9 Nos equidistant) welded to side frame as per existing shape and size.
254
-
-
... More
Electric arc welding to the broken joints upto 1 cm long of steel shoe rack as required including necessary painting to match the existing surfaces all as directed.
3147
-
-
... More
Removing unserviceable Rubber shoe and S&F new rubber shoe as per existing shape and size.
1640
-
-
... More
Cleaning the all steel surfaces by using various types abrasive cloth emery, filling with putty and two coat of spray painting with synthetic enamel black 1st grade over a coat of red oxide primer up to a glossy finish complete.
410
-
-
... More
EXAMINATION COUCH : DRG NO FD-122 (M)
-
-
-
... More
Taking down u/s drawer and S&F new Drawer with Aluminium handle as per drawing complete all as specified and directed.
15
-
-
... More
All as per item No. 24.01 but sliding tray of examination couch.
15
-
-
... More
Replacement of upholstery of examination couch with Fabric best quality as approved by GE (Rate of fabric not less than Rs 300 per RM).
10
-
-
... More
Taking down u/s top and S&F new top complete of required shape & size as per drawing, including copper plated steel springs, cotton layers, teak wood plank, upholstery as approved by GE, rest all as per drawing complete (Rate of fabric not less than Rs 300 per RM all as per specified and directed).
10
-
-
... More
Electric arc welding to the broken joints upto 1 cm long of examiantion couch as required including necessary painting to match the existing surfaces all as directed.
80
-
-
... More
Removing unserviceable Rubber shoe and S&F new rubber shoe as per existing shape and size.
80
-
-
... More
Cleaning the all steel surfaces by using various types abrasive cloth emery, filling with putty and two coat of spray painting with synthetic enamel olive green paint of 1st grade over a coat of red oxide primer up to a glossy finish complete.
20
-
-
... More
CABINET FILING STEEL GODREJ 1280X620X460MM FOUR DRAWER/ LATERAL FILING CABINET FOUR DRAWERS/ FILING STEEL CABINET FOR BOOKS : DRG NO- TP/ FD-397/ HFD-2038
-
-
-
... More
Taking down u/s locking device and S&F new Locking device of required shape & size complete as per drawing complete all as specified and directed. Make: Godrej, Harrison, Link.
20
-
-
... More
Taking down u/s Drawer and S&F new Drawer with sliding channel, rubber supports & handle as per drawing all as specified and directed.
34
-
-
... More
Taking down u/s sliding channel and S&F new sliding channel with rubber supports as per drawing all as specified and directed.
35
-
-
... More
Taking down u/s drawer stopper and S&F new MS stopper of required shape & size as per drawing all as specified and directed.
40
-
-
... More
Taking down u/s rubber support and S&F new rubber supports for drawer of approved quality as per drawing all as specified and directed.
22
-
-
... More
Electric arc welding to the broken joints upto 1 cm long as required including necessary painting to match the existing surfaces all as directed.
130
-
-
... More
Removing of dents and bends of various Cabinet wherever required including welding where required. Rest all as per specified and directed.
25
-
-
... More
cleaning the all steel surfaces by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel paint as per existing shade 1st grade (Godrej pattern) over a coat of red oxide primer to internal surfaces including drawers and external surfaces up to a glossy finish complete all as per specified and directed.
25
-
-
... More
TABLE WRITNG SINGLE DRAWER T-111 / TABLE WRITING GODREJ : DRG NO- TP
-
-
-
... More
Top of size 1215mmx630mm made of 18mm thick MDF board exterior grade ( Grade I, Type-II ) ISI marked duly post- formed with 0.6 mm thick laminate in colour / shade as approved by Engr-in-Charge / GE with 2mm thick PVC edging fixed on two sides with strong bonded chemical adhasive through hot pressed machine complete rest all as per drg.
230
-
-
... More
Drawer made out of 1 mm thick mild steel black sheet size & shape required and shown on drawings including two coats of synthetic enamel paint of existing shade 1st grade over a coat of red oxide primer complete all as specified and directed.
135
-
-
... More
Drawer lock of mild steel 50 mm, 6 lever (brass lever) of best quality with duplicate keys as approved.
230
-
-
... More
Legs with 25 mm mild steel square tubes 1.6 mm thick size required as per drawings including two coats of synthetic enamel paint of existing shade 1st grade over a coat of red oxide primer complete.
140
-
-
... More
Stiffener with 25 mm size mild steel square tube 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint over 1st grade over a coat of red oxide primer complete.
125
-
-
... More
Hard rubber shoes of best quality as approved.
920
-
-
... More
Hard plastic handle of drawer of best quality.
230
-
-
... More
Electric Arc welding upto 1 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel paint 1st grade over a coat of primer complete.
3000
-
-
... More
Removing of dents and bends of table writing wherever required including welding. Rest all as per specified and directed by Engr-in-charge.
230
-
-
... More
Cleaning the all steel surfaces by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel paint as per existing shade (Godrej pattern) 1st grade over a coat of red oxide primer to external surfaces up to a glossy finish complete all as per specified and directed.
230
-
-
... More
RACK STEEL SHELVING 6'-3"x36"x18" / 2475x900x500mm : DRG- TP
-
-
-
... More
Taking down u/s shelf and S&F new shelf made of 1 mm thick MS sheet of shape & size as per drawing complete all as per specified and directed.
195
-
-
... More
Taking down u/s tringular sheet and S&F new tringular sheet of 75x75x3mm thick F.I. cut to shape as per drawing all as specified and directed.
218
-
-
... More
Electric Arc welding upto 1 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel paint 1st grade over a coat of primer complete.
4580
-
-
... More
Removing of dents and bends of rack steel wherever required including welding. Rest all as specified and directed by Engr-in-charge.
120
-
-
... More
Cleaning the all steel surfaces by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel olive green paint of 1st grade over a coat of red oxide primer to all surfaces up to a glossy finish complete all as per specified and directed.
120
-
-
... More
RACK ADJUSTABLE STEEL 6 TIER WITH/WITHOUT CLOSED TYPE : DRG: FD-106(M)/ FD-1038
-
-
-
... More
Taking down u/s shelf and S&F new shelf made of 1 mm thick MS sheet of rack steel 6 tier of shape & size as per drawing complete as per specified and directed.
93
-
-
... More
Taking down u/s tringular sheet and S&F new tringular sheet of 75x75x3mm thick F.I. cut to shape as per drawing all as specified and directed.
108
-
-
... More
Electric Arc welding upto 1 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel paint 1st grade over a coat of primer complete.
600
-
-
... More
cleaning the all steel surfaces by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel olive green paint of 1st grade over a coat of red oxide primer to all surfaces(including inner surfaces) up to a glossy finish complete all as per specified and directed.
30
-
-
... More
All as per item No. 28.04 but rack steel 6 tier closed type.
20
-
-
... More
Removing of dents and bends of rack steel 6 tier wherever required including welding. Rest all as specified and directed by Engr-in-charge.
50
-
-
... More
TABLE COMPUTER : DRG: FD/E6/MAP/03, TP
-
-
-
... More
Top of size 910mmx570mm made of 18mm thick MDF board exterior grade ( Grade I, Type-II ) ISI marked duly post- formed with 0.6 mm thick laminate in colour / shade as approved by Engr-in-Charge / GE with 2mm thick PVC edging fixed on two sides with strong bonded chemical adhasive through hot pressed machine complete rest all as per drg.
90
-
-
... More
Drawer (including telescopic channels & Knob) made of 18 mm TH MDF prelaminated board of exterior grade and 75 mm deep on telescopic channels.
70
-
-
... More
All as per item No. 29.01 but pull out tray (including telescopic channel) of required shape & size complete of table computer as per drawing..
70
-
-
... More
All as per item No. 29.01 but kye board tray of size 450mmx480mm with telescopic channel complete.
65
-
-
... More
All as per item No. 29.01 but shelf of table computer of required shape & size as per drawing.
80
-
-
... More
Nylon buffers of legs as per drawing complete.
300
-
-
... More
Removing of dents and bends wherever required including welding where required. Rest all specified and directed by Engr-in-charge.
100
-
-
... More
Cleaning the all steel surfaces by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel black paint of 1st grade over a coat of red oxide primer to all surfaces up to a glossy finish complete all as per specified and directed.
100
-
-
... More
SCREEN MOVABLE 3 FOLD STEEL: HFD-2015
-
-
-
... More
Replacement of old u/s cloth and S&F new washable synthetic cloth of size 1210x1680mm of light pastle colour fix with hooks and spring arrangement as per drawing. ( Rate of cloth not less than Rs. 350/ meter).
90
-
-
... More
Replacement of u/s castor and S&F castor of 50mm dia of swivel type as per drawing.
80
-
-
... More
Cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and apply putty as required and applying two coats of synthetic enamel paint (Ivory white/ light blue as approved by GE) 1st grade over a coat of red oxide primer of required shade by the spray painting to all steel surfaces up to a glossy finished shade as directed.
50
-
-
... More
Removing the dents , bends and welding wherever required , complete all as specified and directed by Engr-in-charge.
50
-
-
... More
TABLE OFFICE CLERK (type I) 1500x750x750mm : HFD-2051
-
-
-
... More
Top of size 1500mmx750mm made of 18mm thick MDF board exterior grade ( Grade I, Type-II ) ISI marked duly post- formed with 0.6 mm thick laminate in colour / shade as approved by Engr-in-Charge / GE with 2mm thick PVC edging fixed on two sides with strong bonded chemical adhasive through hot pressed machine complete rest all as per drg.
25
-
-
... More
Complete Table drawer with drawers made out of using two 'C' frames of cross section 62x14x1 mm thick as per drawing. Rest all as specified and directed by Engr-in-charge.
14
-
-
... More
Complete key board tray with tray made out of 1.2mm prime quality CRCA steel of tray size 520x330mm as per drawing. Rest all as specified and directed by Engr-in-charge.
15
-
-
... More
Hard rubber shoes of best quality as approved.
100
-
-
... More
Hard plastic handle of drawer of best quality.
16
-
-
... More
Electric Arc welding upto 1 cm long to steel joints / surfaces of any description all as required and as directed including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.
147
-
-
... More
Removing dents and bends wherever required including welding and cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coat of synthetic enamel paint olive green paint 1st grade over a coat of red oxide primer as approved by spray painting to all steel surfaces up to a glossy finished shade as directed.
25
-
-
... More
Hot Food Trolley / LaundryTrolley : Fd-133 , TP
-
-
-
... More
Replacement of unserviceable wheels ( including axel) of various trolley as per existing shape and size. Rest all as specified and directed by Engr-in-charge.
50
-
-
... More
Repair to food warmer unit (including all parts) complete as per existing standards. Rest all as specified and directed by Engr-in-charge
2
-
-
... More
Replacement of u/s food warmer unit complete of trolley hot food as per existing capacity and specifications. Rest all as specified and directed by Engr-in-charge.
2
-
-
... More
Replacement of u/s containers of trolley hot food with new stainless steel container with cap of existing shape and size. Rest all as specified and directed by Engr-in-charge.
5
-
-
... More
Electric Arc / Gas welding upto 1 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.
165
-
-
... More
Tightening of complete trolley, Removing dents and bends of laundry trolley wherever required including welding and cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coat of synthetic enamel paint olive green paint 1st grade over a coat of red oxide primer as approved by spray painting to all steel surfaces up to a glossy finished shade as directed.
20
-
-
... More
All as per item No. 32.06 above but hot food trolley.
5
-
-
... More
Ladder for loft : Fd- 403/ 238/ 44(M)
-
-
-
... More
S&F new 25mm dia MS conduit rung as per approved by GE.
35
-
-
... More
Electric arc welding upto 1 mm long to the MS conduit pipe joints as required and as directed.
90
-
-
... More
Removing dents and bends wherever required and cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coats of synthetic enamel paint black to all exposed steel surfaces by spray painting up to a glossy finished shade complete.
35
-
-
... More
CHAIR VERANDAH : DRAWING NO : FD-359 & FD- 256, FD/MAP-II/06, FD/E6/MAP/11 or SIMILAR PATTERN
-
-
-
... More
Removing old unserviceable cane from chiar verandah & re-caning the chairs etc with approved new plastic cane 4mm wide and 0.5mm thick half round as per Godrej pattern of colour as approved by Engr-in-Charge/ GE.
1500
-
-
... More
Replacement of u/s PVC seat & back and S&F new seat & back of ISI marked, as approved by GE . Fix as per trade practice and shown on drawing. Rest all as per directed by Engr-in-charge.
170
-
-
... More
Conduit section any member made of MS conduit pipe 16 gauge, 19mm dia as per drg.
754
-
-
... More
Hard rubber shoe as per drg.
6680
-
-
... More
Preparation of surfaces i.e filliing all holes and cracks or deteriorated spots of old painted steel furniture with putty (Internally and externally) ,after applying fine sand paper for making the surface plain, welding where required and clean through water complete as directed than applying two coat of spray Painting of synthetic enamel Paint of 1st quality with suitable shade to items like Olive Green/Black/White as approved by GE, complete all as directed by Engineer-in-Charge for the following items:-
-
-
-
... More
FMN set FD-53
400
-
-
... More
Rack side with tray steel FD-97
30
-
-
... More
Stool steel 305x305x510 mm FD-81(M)
50
-
-
... More
Stool steel revolving FD-354/1026
60
-
-
... More
Chair verandah :MAP/ FD-256/359
1670
-
-
... More
Table steel 1670x760x750mm FD-1012
3
-
-
... More
NOTE- Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements